are configured, and/or associated with a parent device. If you
receive a frame for a VLAN that's not in the list, you walk off
the end of the list. Boom.
Submitted by: C. Stephen Gunn <csg@waterspout.com>
PR: 15291
vlan interfaces it manages. This prevents the interface from
actually sending or receiving data.
Submitted by: C. Stephen Gunn <csg@waterspout.com>
PR: 15290
o be more careful about clearing addresses (this isn't a kludge)
o For AF_INET interfaces, call SIOCDIFFADDR to remove last(?) bit
of cruft.
Special cases for AF_INET shouldn't be here, but I didn't see a good
generic way of doing this. If I missed something, please let me know.
This gross hack makes pccard ejection stable for ethernet cards.
Submitted by: Atushi Onoe-san
possible for ro->ro_rt to be non-NULL even though the RTF_UP flag
is cleared. (Example: a routing daemon or the "route" command
deletes a cloned route in active use by a TCP connection.) In that
case, the code was clobbering a reference to the routing table
entry without decrementing the entry's reference count.
The splnet() call probably isn't needed, but I haven't been able
to prove that yet. It isn't significant from a performance standpoint
since it is executed very rarely.
Reviewed by: wollman and others in the freebsd-current mailing list
packet divert at kernel for IPv6/IPv4 translater daemon
This includes queue related patch submitted by jburkhol@home.com.
Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using ngctl(8), which makes ngctl a lot more useful.
This also allows all the type-specific debugging code in libnetgraph
to go away -- instead, we just ask the node itself to do the ASCII
translation for us.
Currently, all generic control messages are supported, as well as
messages associated with the following node types: async, cisco,
ksocket, and ppp.
See /usr/share/examples/netgraph/ngctl for an example of using this.
Also give ngctl(8) the ability to print out incoming data and
control messages at any time. Eventually nghook(8) may be subsumed.
Several other misc. bug fixes.
Reviewed by: julian
by 2 with people just adding numbers on the end of the ethernet subtypes.
We now have an additional 14 subtypes available in ethernet.
Use one of them immediatly for homePNA.
Reviewed by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
is neither IFF_LOOPBACK or IFF_POINTOPOINT. It's quite common
(and probably more correct) to route local IP numbers via lo0
and it makes configuration easier to assign the hostname address
to local POINTOPOINT links too.
This message usually remains hidden because the loopback interface
gets the highest interface number at boot time, but when the
ethernet interface is added later, the message can get pretty
annoying.
Also, fix a typo.
Not objected to by: freebsd-net
for IPv6 yet)
With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
go to REQ_SENT (and we probably should also log this since it should
only happen in a cross-linked connection).
Submitted by: Mark Tinguely <tinguely@plains.NoDak.edu>
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
completion' flag. If set, the interface output routine will assume that
the packet already has a valid link-level source address. This defaults
to off (the address is overwritten)
PR: kern/10680
Submitted by: "Christopher N . Harrell" <cnh@mindspring.net>
Obtained from: NetBSD
have been there in the first place. A GENERIC kernel shrinks almost 1k.
Add a slightly different safetybelt under nostop for tty drivers.
Add some missing FreeBSD tags
fields in struct cdevsw:
d_stop moved to struct tty.
d_reset already unused.
d_devtotty linkage now provided by dev_t->si_tty.
These fields will be removed from struct cdevsw together with
d_params and d_maxio Real Soon Now.
The changes in this patch consist of:
initialize dev->si_tty in *_open()
initialize tty->t_stop
remove devtotty functions
rename ttpoll to ttypoll
a few adjustments to these changes in the generic code
a bump of __FreeBSD_version
add a couple of FreeBSD tags
This means that we will not have to have a bpf and a non-bpf version
of our driver modules.
This does not open any security hole, because the bpf core isn't loadable
The drivers left unchanged are the "cross platform" drivers where the respective
maintainers are urged to DTRT, whatever that may be.
Add a couple of missing FreeBSD tags.
the loop and not set an error, so we would then try to access an invalid
mbuf...
PR: 12780
Submitted by: bright@rush.net aka zb^3
a new record in length a pr was open... only about a half hour...
of the additional checks in rev.1.12 was wrong. The others are a
bit inconsistent and are probably unnecessarily pessimal. Checking
for overflow of addition, if necessary at all, should be done in
bpf_validate().
PR: 12484
This doesn't change the size or alignment of the structure on either i386
or Alpha, and thus should be binary-compatible (modulo problems with old
applications and routes with more than 2^15 references).
Reviewed by: peter
This caused a panic in rtfreee() called with a root node from the
routing socket code (when processing a RTM_GET message looking for
the default route while there is none).
Since no existing code seems to have any use getting the root node
from rn_match(), it seems cleaner never to return it rather than
check for this condition at the caller's.
PR: kern/12265
This is inteded for to allow ifconfig to print various unstructured
information from an interface.
The data is returned from the kernel in ASCII form, see the comment in
if.h for some technicalities.
Canonical cut&paste example to be found in if_tun.c
Initial use:
Now tun* interfaces tell the PID of the process which opened them.
Future uses could be (volounteers welcome!):
Have ppp/slip interfaces tell which tty they use.
Make sync interfaces return their media state: red/yellow/blue
alarm, timeslot assignment and so on.
Make ethernets warn about missing heartbeats and/or cables
This means that the driver will add/delete routes when it knows it is
up/down, rather than have the generic code belive it is up if configured.
This is probably most useful for serial lines, although many PHY chips
could probably tell us if we're connected to the cable/hub as well.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it. cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.
cdevsw_add() will print an message if the d_maj field looks bogus.
Remove nblkdev and nchrdev variables. Most places they were used
bogusly. Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.
Move bdevsw() and devsw() functions to kern/kern_conf.c
Bump __FreeBSD_version to 400006
This commit removes:
72 bogus makedev() calls
26 bogus SYSINIT functions
if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.
I4b and vinum not changed. Patches emailed to authors. LINT
probably broken until they catch up.
Reformat and initialize correctly all "struct cdevsw".
Initialize the d_maj and d_bmaj fields.
The d_reset field was not removed, although it is never used.
I used a program to do most of this, so all the files now use the
same consistent format. Please keep it that way.
Vinum and i4b not modified, patches emailed to respective authors.
Submitted by: adrian@freebsd.org
Change reference count in struct ifaddr to a u_int, to be able
to handle more than 2^16 routes to the same interface.
Fix suggested by Andrew Bangs <andrewb@demon.net> in PR kern/10570.
Tested by <adrian@freebsd.org> and me under -current.
o fix DDB support
- include "opt_ddb.h"
- fix Debugger() arg
pointed out by bde
o back out pvc shadow interface support
- it is currently not used
- to make it easier to merge another implementation
o misc minor cleanup
Made a new (inline) function devsw(dev_t dev) and substituted it.
Changed to the BDEV variant to this format as well: bdevsw(dev_t dev)
DEVFS will eventually benefit from this change too.
routines. The descriptor contains parameters which could be used
within those routines (eg. ip_output() ).
On passing, add IPPROTO_PGM entry to netinet/in.h
This is a seriously beefed up chroot kind of thing. The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.
For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact: "real virtual servers".
Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.
Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.
It generally does what one would expect, but setting up a jail
still takes a little knowledge.
A few notes:
I have no scripts for setting up a jail, don't ask me for them.
The IP number should be an alias on one of the interfaces.
mount a /proc in each jail, it will make ps more useable.
/proc/<pid>/status tells the hostname of the prison for
jailed processes.
Quotas are only sensible if you have a mountpoint per prison.
There are no privisions for stopping resource-hogging.
Some "#ifdef INET" and similar may be missing (send patches!)
If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!
Tools, comments, patches & documentation most welcome.
Have fun...
Sponsored by: http://www.rndassociates.com/
Run for almost a year by: http://www.servetheweb.com/
that doesn't have it. This is achieved by having minimal do-nothing stubs
enabled when there are no bpfilter devices configured.
Driver modules should be built with BPF enabled for maximum
convenience (but can be built without it for maximum performance).
1:
s/suser/suser_xxx/
2:
Add new function: suser(struct proc *), prototyped in <sys/proc.h>.
3:
s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/
The remaining suser_xxx() calls will be scrutinized and dealt with
later.
There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.
More changes to the suser() API will come along with the "jail" code.
able to expand the zeros, ones etc masks on the fly. It seems a good
number of domains don't set the rn_maxkey variable anyway, and because
this is a domain itself, there is no guarantee we've been called after
a protocol that actually has set it (ie: inet), so start with a maxkey
of a relatively sane size as a base point until it can adapt on the fly.
it used to be that way. I'm not sure that it's needed, but it does
walk the ifp list..
Incidently, there's nothing to sanity check the ifq_maxlen on loaded
interfaces..
- unifdef -DCOMPAT_IPFW (this was on by default already)
- remove traces of in-kernel ip_nat package, it was never committed.
- Make IPFW and DUMMYNET initialize themselves rather than depend on
compiled-in hooks in ip_init(). This means they initialize the same
way both in-kernel and as kld modules. (IPFW initializes now :-)
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition. eisa, isapnp and pccard* are
not yet using the new resource manager. Once fully converted, all drivers
will be loadable, including PCI and ISA.
(Some other changes appear to have snuck in, including a port of Soren's
ATA driver to the Alpha. Soren, back this out if you need to.)
This is a checkpoint of work-in-progress, but is quite functional.
The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.
Approved by: core
- add support for devices that do vlan tag insertion/deletion in firmware
- add multicast support
- add vlan_unconfig() to complement vlan_config()
- update ifconfig(8) to configure vlan interfaces (vlan tag and
parent device)
Also fix a small bug in ifconfig; sometimes sa_family is overwritten
by ioctls.
Reviewed by: wollman
Move the Olicom token ring driver to the officially sanctionned location of
/sys/contrib. Also fix some brokenness in the generic token ring support.
Be warned that if_dl.h has been changed and SOME programs might
like recompilation.
type may become necessary soon. :)
Also add a couple of additional macros that NetBSD has which we don't.
Nothing in FreeBSD uses these (yet) so adding them in shouldn't hurt
anything.
This is for various Olicom cards. An IBM driver is following.
This patch also adds support to tcpdump to decode packets on tokenring.
Congratulations to the proud father.. (below)
Submitted by: Larry Lile <lile@stdio.com>
in the first place.
Use 3sec timeout as recommended.
Reorder some debug messages.
Label som of the 0x%x in debug messages
Make sppp_print_bytes() use %*D and handle zero length.
If we don't have MAGIC numbers, don't yell loopback if 0 == 0
before they got changed. This can help eliminate much of the
gymnastics drivers do in their ioctl routines to figure this out.
Remove commented out IFF_NOTRAILERS
This makes it possible to change the sysctl tree at runtime.
* Change KLD to find and register any sysctl nodes contained in the loaded
file and to unregister them when the file is unloaded.
Reviewed by: Archie Cobbs <archie@whistle.com>,
Peter Wemm <peter@netplex.com.au> (well they looked at it anyway)
Drivers should be updated if they get flagged by this message.
(The reason this is important is because we do not have a way
to catch this mistake for interfaces added after ifinit() runs.)
changes to the VM system to support the new swapper, VM bug
fixes, several VM optimizations, and some additional revamping of the
VM code. The specific bug fixes will be documented with additional
forced commits. This commit is somewhat rough in regards to code
cleanup issues.
Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
XXX It probably makes sense to have a flag for bsd.kern.mk to avoid these
rules.
XXX IO_NDELAY seems to be the main reason for it, when used in a cdevsw
read or write "flag" context. Perhaps a redundant declaration
somewhere like sys/conf.h might help remove the need for vnode.h in
these device drivers in the first place.
Not tested on the if_sr, if_cx and if_ar drivers, but
expected to work just the same as it used to.
Any users of these drivers (or even better: donors
of hardware for them) please contact phk@freebsd.org
so we can test the next batch of changes to if_sppp.
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.
These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.
Reviewed by: Bruce Evans <bde@zeta.org.au>
Reviewed by: Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by: Mike Spengler <mks@networkcs.com>
by bde, a few other tweaks to get the patch to apply cleanly again and
some improvements to the comments.
This change closes some fairly minor security holes associated with
F_SETOWN, fixes a few bugs, and removes some limitations that F_SETOWN
had on tty devices. For more details, see the description on the PR.
Because this patch increases the size of the proc and pgrp structures,
it is necessary to re-install the includes and recompile libkvm,
the vinum lkm, fstat, gcore, gdb, ipfilter, ps, top, and w.
PR: kern/7899
Reviewed by: bde, elvind
to convert the timeval into a tick count.
Suggested by: bde
Reviewed by: bde
Handle hz > 1000 in BIOCGRTIMEOUT.
Pointed out by: bde
Reviewed by: bde
Obtained from: OpenBSD
FreeBSD repository version of this file and the isdn4bsd version,
adopt those changes from the i4b version that make this file
BSD-version independent. I attempted to avoid uglifying this file too
much, thus deviated a little from the i4b version (and hope they will
adopt the changes, too).
The diffs mostly concentrate on:
. #include differences between the systems
. different callout handling between FreeBSD vs. Net/OpenBSD
. interface naming (Net/OpenBSD store the ASCII name including the
unit # in struct ifnet, FreeBSD only the name)
. use of random() in FreeBSD vs. time-based pseudo-randomization in
Net/OpenBSD (for loopback detection ad CHAP challenges -- i
assume at least OpenBSD could also benefit from random(), but that's
the way i've got this file)
. interface address list elements are named a little differently
between FreeBSD and Net/OpenBSD
I attempted to segregate those compat fixes from other code fixes and
enhancements.
Obtained from: The isdn4bsd project
another specialized mbuf type in the process. Also clean up some
of the cruft surrounding IPFW, multicast routing, RSVP, and other
ill-explored corners.
ioctl() routine at the end of if_delmulti() so that interfaces with
hardware multicast filtering can update their filters in a timely
manner.
If the interface doesn't support hardware multicast filtering, then
reception of multicast frames is done using 'promiscious mode' or
'capture all multicast frames' mode and software filtering in the
kernel. In this case, it doesn't matter if if_delmulti() ever does
an SCIODELMULTI on the interface or not: if MULTICAST support is
enabled, then we join the 'all hosts' group when the interface is
configured, and remain in it until the interface is brought down.
Without hardware filtering, joining one group means joining all
groups, so it makes no difference if we call the SIOCDELMULTI
routine.
If the interface does support hardware multicast filtering, then
by not reprogramming the hardware filter in if_delmulti(), we have
to wait until somebody calls if_setmulti(), during which time the
interface is receiving frames for multicast groups in which we are
no longer interested.
several new features are added:
- support vc/vp shaping
- support pvc shadow interface
code cleanup:
- remove WMAYBE related code. ENI WMAYBE DMA doen't work.
- remove updating if_lastchange for every packet.
- BPF related code is moved to midway.c as it should be.
(bpfwrite should work if atm_pseudohdr and LLC/SNAP are
prepended.)
- BPF link type is changed to DLT_ATM_RFC1483.
BPF now understands only LLC/SNAP!! (because bpf can't
handle variable link header length.)
It is recommended to use LLC/SNAP instead of NULL
encapsulation for various reasons. (BPF, IPv6,
interoperability, etc.)
the code has been used for months in ALTQ and KAME IPv6.
OKed by phk long time ago.
respectively. Most of the longs should probably have been
u_longs, but this changes is just to prevent warnings about
casts between pointers and integers of different sizes, not
to fix poorly chosen types.
sizeof(struct bpf_hdr) > 20. 20 is normal on 32-bit systems with
32-bit alignment, but we still assume that the last 2 bytes of the
struct are unnecessary padding on such systems. On systems with
64-bit longs, struct timeval is bloated to 16 bytes, so bpf headers
certainly don't fit in 18 bytes.
Remove lots'o'hacks.
looutput is now static.
Other callers who want to use loopback to allow shortcutting
should call the special entrypoint for this, if_simloop(), which is
specifically designed for this purpose. Using looutput for this purpose
was problematic, particularly with bpf and trying to keep track
of whether one should be using the charateristics of the loopback interface
or the interface (e.g. if_ethersubr.c) that was requesting the loopback.
There was a whole class of errors due to this mis-use each of which had
hacks to cover them up.
Consists largly of hack removal :-)
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
NetBSD, ported to FreeBSD by Pierre Beyssac <pb@fasterix.freenix.org> and
minorly tweaked by me.
This is a standard part of FreeBSD, but must be enabled with:
"sysctl -w net.inet.ip.fastforwarding=1" ...and of course forwarding must
also be enabled. This should probably be modified to use the zone
allocator for speed and space efficiency. The current algorithm also
appears to lose if the number of active paths exceeds IPFLOW_MAX (256),
in which case it wastes lots of time trying to figure out which cache
entry to drop.
* Figure out UTC relative to boottime. Four new functions provide
time relative to boottime.
* move "runtime" into struct proc. This helps fix the calcru()
problem in SMP.
* kill mono_time.
* add timespec{add|sub|cmp} macros to time.h. (XXX: These may change!)
* nanosleep, select & poll takes long sleeps one day at a time
Reviewed by: bde
Tested by: ache and others
"time" wasn't a atomic variable, so splfoo() protection were needed
around any access to it, unless you just wanted the seconds part.
Most uses of time.tv_sec now uses the new variable time_second instead.
gettime() changed to getmicrotime(0.
Remove a couple of unneeded splfoo() protections, the new getmicrotime()
is atomic, (until Bruce sets a breakpoint in it).
A couple of places needed random data, so use read_random() instead
of mucking about with time which isn't random.
Add a new nfs_curusec() function.
Mark a couple of bogosities involving the now disappeard time variable.
Update ffs_update() to avoid the weird "== &time" checks, by fixing the
one remaining call that passwd &time as args.
Change profiling in ncr.c to use ticks instead of time. Resolution is
the same.
Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call
hzto() which subtracts time" sequences.
Reviewed by: bde
24 (which is magnalink!) rather than the correct 26.
Initial attempt at a compatability kludge that will negotiate for either
but will prefer to use the correct deflate compression type.
to #include <sys/time.h> first. I've lost count of the number of times
I've had to patch this in porting code. The problem is the
"struct timeval ifi_lastchange" in the mib stats. (most other systems don't
have this, until 4.4bsd anyway).
work reliably yet (I've had panics), but it does seem to occasionally
be able to transmit and receive syntactically-correct packets.
Also fixes one of if_ethersubr.c's legion style bugs, and removes
the hostcache code from standard kernels---the code that depends on it
is not going to happen any time soon, I'm afraid.
The differences Terrys patch and this patch are:
* Remove a lot of un-needed comments.
* Don't put l_hotchar at the front of stuct linesw, there is no need to.
* Use the #defines for the hotchar in the SLIP and PPP line disciplines
since pkh made tunctl static in revision 1.17 these are already
guaranteed to be zero'd and tunattach will only be called once.
Pointed out by: Bruce Evans and Bill Fenner
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)
LFS is temporarily disabled, and will be re-enabled tomorrow.
it contains an address. This can replace all the myriad (wrong) ways
in which this task is performed in the current system. As an added
bonus, since it's a macro, then third-party software vendors have an easy
way to tell whether it's there or not. (This will become necessary
when sizeof(struct sockaddr) is increaased, and also when additional
fields are added to struct ifreq.)
- don't declare `struct arpcom' except in the kernel, so that there is no
dependency on <net/if.h> except in the kernel. This may break something
else.
- spell ETHER_ADDR_LEN as 6 again, so that there is no dependency on
<net/ethernet.h> even in the kernel.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway. Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(
This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
In sppp_chap_input:
1) in the CHAP_CHALLENGE case don't output the peer's name if it is not
what we expected (DEBUG) since it will be printed out in the course
of events anyway.
2) in the CHAP_SUCCESS case test whether the peer is required to
authenticate himself [(sp->lcp.opts & (1 << LCP_OPT_AUTH_PROTO))],
otherwise the state machine may never switch into the network state.
I saw this case against 2 different ISPs; they never bothered to
authenticate themselves to me.
In sppp_pap_input:
in the PAP_ACK case do the same as in 2) above for the same reason.
The #ifdef IPXIP in netipx/ipx_if.h is OK (used from ipx_usrreq.c and
ifconfig.c only).
I also fixed a typo IPXTUNNEL -> IPTUNNEL (and #ifdef'ed out the code
inside, as it never could have compiled - doh.)
Fixed nonblocking mode. It was per-device instead of per-file. This
also fixes clobbering of bd_rtout by overloading it to hold a wrong
version of the blocking flag. I hope nothing depends on the bugs.
Testing in if_ppp.c is good enough.
Added comments about bogus #includes and #defines.
Removed unused #includes.
Don't depend on gcc's misfeature of rewriting short args in old-style
function definitions to match wrong prototypes. I just changed the
function definition to match the prototype, since this is easy to
verify automatically (it causes no changes in the object code), but
it breaks K&R1 support and doesn't fix the pessimal type.
Use gettime() instead of microtime() to set if_lastchange for i/o's.
microtime() is probably too expensive. However, setting if_lastchange
for i/o's may be wrong.
volatile to use outside of splclock(). microtime() is probably too
expensive to use for every i/o. However, setting ifi_lastchange for
every i/o is just wrong according to the comment about ifi_lastchange
in <net/if.h>. It is set then for atm, fddi and the latest version
of ppp.)
Some of these changes are a bit rough and will become
more polished later. the changes to if_ethersubr should largely be moved
to within the appletalk code, but that will happen later.
A few of these were related to network-byteorder problems,
and more were related to loopback failures.
Distribute all but the most fundamental malloc types. This time I also
remembered the trick to making things static: Put "static" in front of
them.
A couple of finer points by: bde
Introduce the SIOC[SG]IFGENERIC hooks that can be used to pass an
arbritrary ioctl subcommand into an interface driver. Surprisingly
enough, there was no provision for this already present (except of the
option of abusing SIOC[SG]IFMEDIA for this).
The idea is that an interface driver can establish ioctl subcommands
of its own that can't be meaningfully interpreted by the upper layer
interface ioctl function. Something like this is required to
implement a clean solution of passing down things like CHAP secrets or
PPP options to the /sys/net/if_sppp* files. (Yes, my CHAP is now
finally working with it, but i gotta update my kernel to the new
callout interface before being able to commit _that_.)
Reviewed by: peter [long ago, actually]
by a protocol, to detirmine if an address matches the net this address
is part of. This is needed by protocols for which netmasks
"just don't work", for example appletalk.
Also add the code in appletalk to make use of this new feature.
Thsi fixes one of the longest standing bugs in appletalk.
The inability to talk to machines to which the path is via a router
which is on a different net, but the same netrange, as your interface.
Protocols that do not supply this function (e.g. IP) should not be affected.
2.3.0 -> 2.3.1 changes, but I seem to recall that there are certain
"issues" with 2.3.1 (I'm not sure if it's just pppd or the whole lot, I
am not quite that far). The present pppd seems to work with it just fine
for the time being.
Among the changes are that zlib (aka LZ77 aka deflate aka gzip) compression
is implemented as well as the original compress(1) LZW style.
socket addresses in mbufs. (Socket buffers are the one exception.) A number
of kernel APIs needed to get fixed in order to make this happen. Also,
fix three protocol families which kept PCBs in mbufs to not malloc them
instead. Delete some old compatibility cruft while we're at it, and add
some new routines in the in_cksum family.
returning ICMP_TIMXCEED)
use CISCO_UNICAST instead of CISCO_MULTICAST to send normal packets.
this is needed for packets to get processed by a cisco router,
but doesn't matter if a packet is just forwarded.
Reviewed by:itojun@itojun.org
