having dereferenced it. We either should generally check the device_t's
supplied to bus functions before using them (which we seem to virtually
never do) or just assume that they are not NULL.
While at it make this code fit 78 columns.
Found with: Coverity Prevent(tm)
CID: 4230
when actually setting a driver as especially ENOMEM is fatal in these
cases.
- Annotate other calls to device_set_devclass(9) and device_set_driver(9)
without the return value being checked and that are okay to fail.
Reviewed by: yongari (slightly earlier version)
in addition to the user priority for threads whose current real priority
is equal to the previous user priority or if the new priority is a
real-time priority. This allows priority changes of other threads to
have an immediate effect.
MFC after: 2 weeks
-1. But, because ino_t is unsigned, this case was not covered by the
test ino > 0 in pipeclose(), leading to the free_unr(-1). Fix it by
explicitely comparing with 0 and -1. [1]
Do no access freed memory, the inode number was cached to prevent access
to cpipe after it possibly was freed, but I failed to commit the right
patch.
Noted by: gianni [1]
Pointy hat to: kib
MFC after: 3 days
introduced when feed-forward clock support is enabled in the kernel:
- Rename the "choice" variable to "available".
- Streamline the implementation of the "active" variable's sysctl handler
function.
- Create a kern.sysclock sysctl node for general sysclock related configuration
options. Place the "available" and "active" variables under this node.
- Create a kern.sysclock.ffclock sysctl node for feed-forward clock specific
configuration options. Place the "version" and "ffcounter_bypass" variables
under this node.
- Tweak some of the description strings.
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
reimplementing the [get]{bin,nano,micro}[up]time() wrapper functions in terms of
the new "fromclock" API instead.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
that new APIs with some performance sensitivity can be built on top of them.
These functions should not be called directly except in special circumstances.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
fbclock_{nanouptime|microuptime|bintime|nanotime|microtime}() functions to avoid
indirecting through a sysclock_ops wrapper function.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
environment strings and ELF auxiliary vectors from a process stack.
Make sysctl_kern_proc_args to read not cached arguments from the
process stack.
Export proc_getargv() and proc_getenvv() so they can be reused by
procfs and linprocfs.
Suggested by: kib
Reviewed by: kib
Discussed with: kib, rwatson, jilles
Tested by: pho
MFC after: 2 weeks
ffclock time in seconds.
- Add IOCTL to retrieve ffclock timestamps from userland.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
system calls to provide feed-forward clock management capabilities to
userspace processes. ffclock_getcounter() returns the current value of the
kernel's feed-forward clock counter. ffclock_getestimate() returns the current
feed-forward clock parameter estimates and ffclock_setestimate() updates the
feed-forward clock parameter estimates.
- Document the syscalls in the ffclock.2 man page.
- Regenerate the script-derived syscall related files.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
defined and will allow consumers, willing to provide options, file and
line to locking requests, to not worry about options redefining the
interfaces.
This is typically useful when there is the need to build another
locking interface on top of the mutex one.
The introduced functions that consumers can use are:
- mtx_lock_flags_
- mtx_unlock_flags_
- mtx_lock_spin_flags_
- mtx_unlock_spin_flags_
- mtx_assert_
- thread_lock_flags_
Spare notes:
- Likely we can get rid of all the 'INVARIANTS' specification in the
ppbus code by using the same macro as done in this patch (but this is
left to the ppbus maintainer)
- all the other locking interfaces may require a similar cleanup, where
the most notable case is sx which will allow a further cleanup of
vm_map locking facilities
- The patch should be fully compatible with older branches, thus a MFC
is previewed (infact it uses all the underlying mechanisms already
present).
Comments review by: eadler, Ben Kaduk
Discussed with: kib, jhb
MFC after: 1 month
Simplify the description of pause() and shorten the KASSERT message in pause.
Also add a clamp for the timo argument in the non-KASSERT case.
Suggested by: Bruce Evans
MFC after: 1 week
- Wrap [get]{bin,nano,micro}[up]time() functions of sys/time.h to allow
requesting time from either the feedback or the feed-forward clock. If a
feedback (e.g. ntpd) and feed-forward (e.g. radclock) daemon are both running
on the system, both kernel clocks are updated but only one serves time.
- Add similar wrappers for the feed-forward difference clock.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
clocks. Each routine can output an upper bound on the absolute time or time
interval requested. Different flavours of absolute time can be requested, for
example with or without leap seconds, monotonic or not, etc.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
Implement ffcounter, a monotonically increasing cumulative counter on top of the
active timecounter. Provide low-level functions to read the ffcounter and
convert it to absolute time or a time interval in seconds using the current
ffclock estimates, which track the drift of the oscillator. Add a ring of
fftimehands to track passing of time on each kernel tick and pick up updates of
ffclock estimates.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
to the kernel's pause() function. The pause() function can now be used
when cold != 0. Also assert that the timeout in system ticks must be
positive.
Suggested by: Bruce Evans
MFC after: 1 week
to kern/subr_bus.c. Simplify this function so that it no longer
depends on malloc() to execute. Identify a few other places where
it makes sense to use device_delete_all_children().
MFC after: 1 week
nullfs. The problem is that resulting vnode is only required to be
held on return from the successfull call to vop, instead of being
referenced.
Nullfs VOP_INACTIVE() method reclaims the vnode, which in combination
with the VOP_VPTOCNP() interface means that the directory vnode
returned from VOP_VPTOCNP() is reclaimed in advance, causing
vn_fullpath() to error with EBADF or like.
Change the interface for VOP_VPTOCNP(), now the dvp must be
referenced. Convert all in-tree implementations of VOP_VPTOCNP(),
which is trivial, because vhold(9) and vref(9) are similar in the
locking prerequisites. Out-of-tree fs implementation of VOP_VPTOCNP(),
if any, should have no trouble with the fix.
Tested by: pho
Reviewed by: mckusick
MFC after: 3 weeks (subject of re approval)
The current code mixes the use of `flags' and `mode'. This is a bit
confusing, since the faccessat() function as a `flag' parameter to store
the AT_ flag.
Make this less confusing by using the same name as used in the POSIX
specification -- `amode'.
firmware image in the module is registered. Instead, do it when the
other image is itself referenced.
This allows a module with multiple firmware images to be automatically
unloaded when none of the firmware images are in use.
Discussed with: jhb@ (on -hackers)
p->p_boundary_count. Race could cause the execve(2) from the threaded
process to hung since thread boundary counter was incorrect and
single-threading never finished.
Reported by: pluknet, pho
Tested by: pho
MFC after: 1 week
This enables locking consumers to pass their own structures around as const and
be able to assert locks embedded into those structures.
Reviewed by: ed, kib, jhb
curthread-accessing part of mtx_{,un}lock(9) when using a r210623-style
curthread implementation on sparc64, crashing the kernel in its early
cycles as PCPU isn't set up, yet (and can't be set up as OFW is one of the
things we need for that, which leads to a chicken-and-egg problem). What
happens is that due to the fact that the idea of r210623 actually is to
allow the compiler to cache invocations of curthread, it factors out
obtaining curthread needed for both mtx_lock(9) and mtx_unlock(9) to
before the branch based on kobj_mutex_inited when compiling the kernel
without the debugging options. So change kobj_class_compile_static(9)
to just never acquire kobj_mtx, effectively restricting it to its
documented use, and add a kobj_init_static(9) for initializing objects
using a class compiled with the former and that also avoids using mutex(9)
(and malloc(9)). Also assert in both of these functions that they are
used in their intended way only.
While at it, inline kobj_register_method() and kobj_unregister_method()
as there wasn't much point for factoring them out in the first place
and so that a reader of the code has to figure out the locking for
fewer functions missing a KOBJ_ASSERT.
Tested on powerpc{,64} by andreast.
Reviewed by: nwhitehorn (earlier version), jhb
MFC after: 3 days
