temporarily turn off the nonInteractive variable around the DHCP and IPv6
Yes/No questions in a network device setup so that those questions are
asked.
use and has been broken in -CURRENT for a long time.
Clean up unneeded entries in the nlist array.
Implement kvm-backed ttymode (which we never had before). Incomplete as we
do not (yet?) print the correct device, sid or pgid.
Sponsored by: DARPA, NAI Labs
line as an environment variable assignment, is broken
and not conformant to its description in the manual page.
I think it is worthwhile to have that fix in 4.6.
PR: bin/38374
Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
MFC after: 2 days
`/2' with `>>1'. In the context `>>1' is more appropriate
because it looks like the division is used to restore a
shifted value.
GCC GNATS PR: c/6677
This fixes a problem where wheel-up movement is taken as wheel-down
in the sysmouse protocol.
Do not assume the plain char's are signed; use `signed char' where
char's need to be signed.
Discussed on: audit
Pointed out by: bde
configured).
Handle internal failures in radius_Authenticate() correctly.
Bump the ppp version number.
This doesn't yet work with MPPE. More will follow.
Sponsored by: Mozoon
/etc/exports. Oversized lines were unlikely due to the large 10k
limit, but any found would cause mountd to exit with an error. Also
fix one or two compiler warnings.
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.
When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SESSIONID from the environment in direct mode or the
NGM_PPPOE_SESSIONID message in other modes. If no SESSIONID is found,
default to the interface index in client mode or zero in server mode.
When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
of the physical device (ie, the N in /dev/i4brbchN).
This makes it easier for the RADIUS server to identify the client
WRT accounting data etc.
Prompted by: lsz8425 <lsz8425@mail.cd.hn.cn>
just send PROTO_IP packets when we've got only one link up in multi-link
mode.
Problem noted by: Adrian Close <adrian@fernhilltec.com.au>
MFC after: 1 week
o Minor grammar fixes.
o Sort SEE ALSO references, and add iostat(8).
o Delete punctuation at end of AUTHORS' section only line
Reviewed by: rwatson, Hiten Pandya <hiten@uk.FreeBSD.org>
include all package files into resulting tarball.
PR: 34007
Submitted by: olgeni
While I here:
- Remove bogus comment;
- ensure that we return the proper exit code in the case of -b failure.
MFC after: 5 days
#include route.h before iso88025.h, and we have to dereference
the trld_route array correctly. (NOTE: I'm not altogether sure
that this is really the correct way to traverse this array. This
just eliminates the build warning/error. It may not work right at
runtime, and I have no way to test it since I lack the necessary
hardware.)
Broken by: kbyanc, who gets to wear the pointy hat
works on ATAPI drives only.
PR: kern/35512 (a part of)
Submitted by: Philipp Mergenthaler <philipp.mergenthaler@stud.uni-karlsruhe.de>
Reviewed by: -hackers
MFC after: 1 month
using new `@comment DEPORIGIN:...' directive. This would allow us to make
many neat things including:
- easier binary upgrades;
- source upgrades without using external tools by simply extending
bsd.port.mk and pkg_install tools;
- mixed-mode upgrades (source + binary);
- depreciate and deorbit silly +REQUIRED_BY files in the near future.
This feature is no-op until appropriate bsd.port.mk patch is committed, and
even when it is already committed packages generated will remain 100%
compatible with old set of pkg_install tools (module all those neat
features, of course).
MFC after: 6 days
directory, because this prevent this option from being used from the
package-depends target of bsd.port.mk since it creates such empty dir
during its normal operation.
MFC after: 6 days
fatal if the declaration of strdup() isn't in scope. The upper 32 bits
of the pointer are lost since it defaults to returning "int". Fix some
warnings while here, including trying to make gcc-3.1 happy.
Also add the ability to use Bzip'ed distributions -- but this is exclusive
of being able to use Gzip'ed distributions.
Sponsored by: FreeBSD Mall, Inc.
with variable numbers of arguments made this slightly harder than
it should be. Avoid the bug by not doing string concatenation within
the macros, and instead add a new function to syslog or print the
error messages.
This is a boolean option, and if it is specified in a print queue
for a remote host, it causes lpd to resend the data file for each
copy the user requested on 'lpr -#n'. This is useful for network
printers which accept lpd-style jobs, but which ignore the control
file (and thus they ignore any request for multiple copies).
PR: 25635
Reviewed by: short review on freebsd-audit
MFC after: 6 days
rendering of the man pages (turns some sequences of two blank lines
into a single blank line), and eliminates 306 errors generated while
formatting named.conf.5 .
for what is currently the '-p' parameter. '-s' is what NetBSD
used (and they implemented it before I added -p in FreeBSD), and
it also matches the '-s' option in syslogd. Someone in OpenBSD
land had also talked about adding a '-s' option, but it hasn't
happened yet.
MFC after: 5 days
destination.
(Currently lack of their specification does not lead to any problem, because
kernel does not check the consistency between actual address and its
address family / length on raw socket.
However kernel should always check their consistency and stop sending packets
if there is a contradiction. Considering backward compatibility of
programs, I just fixed rtsol now; I'd like to fix the kernel behavior later.)
Reviewed by: ume
MFC after: 3 days
them to point at static strings that contain the default paths. This
makes 'vipw -d' work again (I broke it in rev 1.21; apologies for taking
so long to fix it.)
Spotted by: Olivier Houchard <doginou@cognet.ci0.org>
Sponsored by: DARPA, NAI Labs
instead of u_char *.
The changes are cosmetic except:
RecvConfigAck() now displays the options that are being ACK'd
Huge (bogus) options sent from the peer won't cause an infinite loop
SendIdent and ReceiveIdent are displayed consistenlty with other FSM data
LCP AUTHPROTO options that aren't understood are NAK'd, not REJ'd
trying to run X on some Athlon systems where the BIOS does odd things
(mines an ASUS A7A266, but it seems to also help on other systems).
Here's a description of the problem and my fix:
The problem with the old MTRR code is that it only expects
to find documented values in the bytes of MTRR registers.
To convert the MTRR byte into a FreeBSD "Memory Range Type"
(mrt) it uses the byte value and looks it up in an array.
If the value is not in range then the mrt value ends up
containing random junk.
This isn't an immediate problem. The mrt value is only used
later when rewriting the MTRR registers. When we finally
go to write a value back again, the function i686_mtrrtype()
searches for the junk value and returns -1 when it fails
to find it. This is converted to a byte (0xff) and written
back to the register, causing a GPF as 0xff is an illegal
value for a MTRR byte.
To work around this problem I've added a new mrt flag
MDF_UNKNOWN. We set this when we read a MTRR byte which
we do not understand. If we try to convert a MDF_UNKNOWN
back into a MTRR value, then the new function, i686_mrt2mtrr,
just returns the old value of the MTRR byte. This leaves
the memory range type unchanged.
I have seen one side effect of the fix, which is that ACPI calls
after X has been run seem to hang my machine. As running X would
previously panic the machine, this is still an improvement ;-)
I'd like to MFC this before the 4.6 code freeze - please let me
know if it causes any problems.
PR: 28418, 25958
Tested by: jkh, Christopher Masto <chris@netmonger.net>
MFC after: 2 weeks
present, this field specifies the media volume that the disc is
contained on. If the volume of a given packages is different than the
current volume of mediaDevice, then the user is prompted --
"This is disc #%d. Package %s is on disc #%d\n"
"Would you like to switch discs now?\n"
If the user selects yes, then DEVICE_SHUTDOWN is called and the user
is then prompted --
"Please remove disc #%d from you drive, and add disc #%d"
This works well for a carefully crafted INDEX file, but more work
needs to be done to sort dependencies on a given package based on the
volume that they reside on, to minimize the amount of disc flipping
required of the user.
This commit is a no-op for normal INDEX files and FreeBSD CDs. These
additional features are only used if the INDEX and cdrom.inf file have
multi-volume support.
print out the correct transport it failed on rather than always
spitting out 'udp', also call nc_sperror() to give a more verbose
error message detailing the problem.
files are owned by the caller of newsyslog (usually root:wheel) even if
alternative ownerships were specified in newsyslog.conf.
Note that this is part of a wider problem which is fully addressed in
OpenBSD. Anyone with the time and inclination to incorporate the full
fix for the wider problem will receive no complaints from me and should
feel free to walk all over this delta.
PR: bin/36738
MFC after: 1 week
"confused" about it being unassigned. In fact, gcc was right. Fix the
real problem by setting that variable before break-ing out of a select
statement so gcc is happy, and then remove the unnecessary assignment.
Reported by: a user wondering why lpd syslog-ed about "compiler confusion"
MFC after: 12 days
input file and any temporary (filter) file are closed upon return, and
that is generally done at the end of the routine. This should make it
easier for a later update (not yet written) to implement a "resend_copies"
option.
MFC after: 12 days
remote machines. Now they really are handled *exactly* the same as
input filters (if=) for remote queues, except that they are started
with a different set of parameters. This should fix a few subtle
bugs in output-filter processing on such queues. It is a pretty
significant re-arranging of sendfile(), moving some of it to a new
execfilter() routine.
PR: 36552
Reviewed by: no screams from freebsd-audit
MFC after: 12 days
We are long past the stage where we only had ARP working for 10 Mb/s.
PR: 35604
Submitted by: Gary W. Swearingen <swear@blarg.net>
Additional comments by: Mike DeGraw-Bertsch <mbertsch@radioactivedata.org>
This patch explains -F for usershow and groupshow. Because "groupmod
... -F" doesn't do anything, the patch also drops that from groupmod's
command line args.
PR: 35955
Submitted by: Mike DeGraw-Bertsch <mbertsch@radioactivedata.org>
so know we have proper PKG registration and dependency information.
This is a WIP for 5.0 DP #1, so it is still rough around the edges and
does not GC the old XFree86 3.3.6 handling stuff that should be GC'ed.
Sponsored by: FreeBSD Mall, Inc.
$ cat pkg.tgz | pkg_add -
The above command line will fail on -CURRENT or -STABLE, and
therefore, so will sysinstall if you try to install additional
packages through the network (FTP) from a multiuser system. Because
of the different environment during installation (wrt the playpen),
this bug does not manifest itself during initial installs, and users
may install packages from the network just fine at that time.
This bug was fixed in OpenBSD 4 years ago.
----------------------------
revision 1.4
date: 1998/04/07 05:56:13; author: marc; state: Exp; lines: +13 -8
fix package input from standard input -- the program tried to process
stdin twice. Note: it assumes stdin is a compressed tar file.
----------------------------
PR: conf/36606
Obtained from: OpenBSD
MFC after: 2 weeks
from CD-ROM in 4-stable. Note that in 5-current, we use devfs so this
change (hopefully) shouldn't change anything.
I'll MFC to 4-stable later.
Tested with: FreeBSD/i386, 4.5-STABLE-20020330-JPSNAP
so the .lo files can be partially linked against libraries
which redefine symbols in the standard libs, or which reference
symbols in the objects.
Submitted by: Sam Leffler
MFC After: 3 days
discipline to do the async escaping, but no other benefits are available yet.
Change ``ifdef HAVE_DES'' to ``ifndef NODES'' for consistency.
Make the Makefile a little more sane WRT RELEASE_CRUNCH.
This is needed on sparc64 (and maybe all OpenFirmware based machines) as
most [all?] OpenBoot PROM's require either an a.out or FCode boot image.
Submitted by: jake
/kernel. kgmon actually appears to use getbootfile(), and the man page
might need to be updated to reflect that.
Reported by: Hiten Pandya <hiten@uk.FreeBSD.org>
