FDT overlays is de-facto standard for describing expansion boards like
Beaglebone capes or Raspberry Pi shields. The ides is to have basic
DTB for base board and overlays DTB for shields/capes and to construct
final DTB either using human-readable configuration or some
self-discovery mechanism. I believe this approach can also be expanded
to support dynamically loadable FPGA bitstreams on systems like
Zedboard/Zybo.
Overlaying process is simmilar to executable link process for
binaries: each DTB has "exported" symbols and "undefined" symbols, the
latter are resolved using information for the former obtained from
base DTB or one of the overlays applied earlier (more rare case).
This symbols information is not generated by standard dtc that FreeBSD
has in base system, patched[1] version required to produces
overlay-compatible blobs. So although DTB files generated by
buildkernel do not support overlays there are enough
vendor/community-provided DTB blobs ciruclating around to justify
committing this change to ubldr.
This commit introduces handler for "fdt_overlays" variable that can be
defined either as a loader env variable or U-Boot env variable.
fdt_overlays is comma-separated list of .dtbo files located in
/boot/dtb/ directory along with base .dtb. ubldr loads files and
applies them one-by-one to base .dtb and then passes result blob to
the kernel.
[1] dd6a0533e8
Differential Revision: https://reviews.freebsd.org/D3180
- Factor out common part to zynq-7000.dtsi
- Fix problem with Zynq interrupts by using interrupt "triples"
in .dtsi file to differentiate between edge-triggered and
level-triggered interrupts
- cgem driver now recognizes "status" property
Submitted by: Thomas Skibo <thomasskibo@yahoo.com>
Differential Revision: https://reviews.freebsd.org/D6095
The introduction of palmbus and previous work allows us to cut the
differences between FreeBSD and OpenWRT DTS files a bit further.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6043
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
This change is required so that RT3662/RT3883 PCI can function correctly
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6028
The block cache implementation in loader has proven to be almost useless, and in worst case even slowing down the disk reads due to insufficient cache size and extra memory copy.
Also the current cache implementation does not cache reads from CDs, or work with zfs built on top of multiple disks.
Instead of an LRU, this code uses a simple hash (O(1) read from cache), and instead of a single global cache, a separate cache per block device.
The cache also implements limited read-ahead to increase performance.
To simplify read ahead management, the read ahead will not wrap over bcache end, so in worst case, single block physical read will be performed to fill the last block in bcache.
Booting from a virtual CD over IPMI:
0ms latency, before: 27 second, after: 7 seconds
60ms latency, before: over 12 minutes, after: under 5 minutes.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: delphij (previous version), emaste (previous version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4713
This revision suggests dtsi patches to be used with the original OpenWRT
dtsi files so we can re-use what has already been done in OpenWRT for the
Mediatek/Ralink SoCs.
The only thing that is required after importing this revision should be
the following:
1. Import OpenWRT dts/dtsi files into sys/gnu/dts/mips
2. Run the following script in sys/gnu/dts/mips:
for f in `ls [mr]t*.dtsi`; do
printf "\n#include <fbsd-$f>\n" > $f
done
This will apply our dtsi patches to OpenWRT's dtsi files and will allow us
to re-use dts/dtsi files for ~170 Mediatek/Ralink boards.
Currently our drivers are not 100% compatible with OpenWRT's dts files, but
they're compatible enough.
We can add more functionality in the future that would better leverage the
OpenWRT work as well.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5965
system. This uses the hints mechnanism. This mostly works today
because when there's no static hints (the default), this value can be
fetched from the hint. When there is a static hints file, the hint
passed from the boot loader to the kernel is ignored, but for the BIOS
case we're able to find it anyway. However, with UEFI, the fallback
doesn't work, so we get a panic instead.
Switch to acpi.rsdp and use TUNABLE_ULONG_FETCH instead. Continue to
generate the old values to allow for transitions. In addition, fall
back to the old method if the new method isn't present.
Add comments about all this.
Differential Revision: https://reviews.freebsd.org/D5866
In case the firmware falls through to executing startup.sh, populate it
with the name of our boot loader. In normal operation this should not be
necessary but may allow the system to boot if it would otherwise just
remain at a shell prompt.
Reviewed by: andrew, imp, smh
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5878
alignment aborts in ubldr.bin for RPi that started happening with clang 3.8
(earlier clang apparently didn't generate strd instructions that trigger
the alignment fault). The abort happened in ubldr.bin and not ubldr (elf
version) because the elf headers are 0xf4 bytes long, and stripping them
off left everything 4-byte aligned.
While here, also stop aligning the data segment to a page boundary, align
it to 8 bytes instead (aligning to a page just needlessly makes the file
bigger); pointed out by andrew@.
Add support for 4k sector GELI encrypted partitions to the bootloader
This is the default created by the installer
Because the IV is different for each sector, and the XTS tweak carries forward you can not decrypt a partial sector if the starting offset is not 0
Make boot2 and the loader read in 4k aligned chunks
Reviewed by: ed, oshogbo
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D5820
a child of it. This is done in conformity with Linux dts files and
as preparation for rework of BCM2836 interrupt controller for INTRNG.
Reviewed by: gonzo
Differential Revision: https://reviews.freebsd.org/D5807
to the boot.netif.mtu env var, which will be picked up by pre-existing code
in nfs_mountroot() and used to configure the interface accordingly.
This should bring the same functionality when the bootp/dhcp work is done
by loader(8) as r297150 does for the in-kernel BOOTP case.
The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C,
PMIC, GPIO, CPU temperature and clock.
Note: The PCIe driver is pure mash at this moment. It will be reworked
immediately when both D5237 and D2579 enter the current tree.
After ARM_INTRNG introduction, MPIC code needed several modifications:
- IRQ resource and its handler added
- several DEVMETHODs of INTRNG interface implemented
- defines enhanced to ensure code compiles as well for AXP as for A38X
- added dummy MSI_IRQ, ERR_IRQ defines for Armada38x
- MPIC driver was added to files.armada38x, ARM_INTRNG option enabled in
kernconf file and regs of MPIC corrected in dts file.
Instead of modifying Armada38X DTS, offsets to CPU registers defined in
driver were changed. That required restoring 'reg' property of mpic node
in ArmadaXP to state compliant with Linux DTS.
Additionally, required ARM_INTRNG definitions were added to mv_common.c.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: adrian, andrew, ian, skra
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5030
Both objdump and nm are equally capable of reporting undefined symbols.
This gets us a step closer to building without binutils as we have an nm
implementation from ELF Tool Chain.
Reviewed by: bdrewery
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5613
Until now, ubldr has been trying to locate the U-Boot API using a hint
address (U-Boot's current stack pointer), aligning it to 1MiB and going
over a 3MiB (or 1MiB in case of MIPS) memory region searching for a
valid API signature.
This change introduces an alternative way of doing this, namely the
following:
- both U-Boot's bootelf and go commands actually pass argc and argv to
the entry point (e.g., ubldr's start function, but they should also
be passed over to main() transparently)
- so, instead of trying to go and look for a valid API signature, we
look at the parameters passed to main()
- if there's an option '-a' with argument, which is a valid hexadecimal
unsigned long number (x), we try to verify whether we have a valid
API signature at address x. If so - we use it. If not - we fallback
to the original way of locating the API signature.
The U-Boot change, which causes the API structure address to be
exported as an environment variable, was committed to mainline U-Boot
as commit 22aa61f707574dd569296f521fcfc46a05f51c48
Reviewed by: andrew, adrian
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5492
the boot loader should not skip over these anymore while loading images.
Otherwise the kernel can still panic when it doesn't find the .eh_frame
section belonging to the .rela.eh_frame section.
Unfortunately this will require installing boot loaders from sys/boot
before attempting to boot with a new kernel.
Reviewed by: kib
MFC after: 2 weeks
X-MFC-With: r296419
(32 and 64-bit, LE and BE).
The changes were tested with QEMU's 'mips' target.
Most of the implementation was lifted from the ARM version, the appropriate
MIPS-specific things were implemented.
With these changes I am able to go all the way through the u-boot->ubldr->kernel
boot chain in QEMU on all combinations of bit-ness and endian-ness.
For the tests I've used FAT32 disk images (as FAT32 is supported by U-boot),
which include /boot/kernel/kernel and /boot/kernel/ubldr.bin
In U-boot I do:
fatload ide 0 <LOAD_ADDR> /boot/kernel/ubldr.bin; go <LOAD_ADDR>
where LOAD_ADDR is 80800000 for 32-bit and ffffffff80800000 for 64-bit
Then it's the usual ubldr that takes over and loads and starts a kernel.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5313
ubldr.
The changes are mostly dealing with removing unnecessary casts from the U-Boot
API (we're passing only pointers, no obvious reason to cast them to uint32_t),
cleaning up some compiler warnings and using the proper printf format
specifiers in order to be able to compile cleanly for both 32-bit and 64-bit
MIPS targets.
Reviewed by: imp
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5312
translate directly into calls to their namesake API functions in
libvmmapi.
It is an improvement over the existing setreg(), setmsr(), setcr()
setgdt() and exec() callbacks in that the new additions give full
control and don't assume we're booting FreeBSD, like exec() and
don't assume one only wants to set the value of RSP, like setreg().
sys/boot/fdt/Makefile
sys/boot/uboot/fdt/Makefile
sys/boot/uboot/lib/Makefile
This causes compilation issues on MIPS due to trying to link PIC with non-PIC
code. This revision includes bsd.stand.mk in the above files.
Reviewed by: imp
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5311
Although this may not be an issue in practice, it would be more correct if the 64-bit version was used. Also, using the 64-bit version would make it easier to add support for 64-bit ubldr on MIPS.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5310
The HDMI driver will attach a framebuffer device when a display is
connected. If the EDID can be read and contains a preferred mode, it
will be used. Otherwise the framebuffer will default to 800x600.
In addition, if the EDID contains a CEA-861 extension block and the
"basic audio" flag is set, audio playback at 48kHz 16-bit stereo is
enabled on the controller.
Reviewed by: andrew
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5383
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Tested on Spike simulator with 2 and 16 cores (tlb enabled),
so set MAXCPU to 16 at this time.
This uses FDT data to get information about CPUs
(code based on arm64 mp_machdep).
Invalidate entire TLB cache as it is the only way yet.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
import it into the loader(8) env as dhcp.root-path, so that it overrides
any dhcp/bootp server-provided path.
Now if you have a dhcp server available you can easily net-boot a u-boot
system even if you don't control the dhcp server config, by setting just
two variables in the u-boot env:
loaderdev=net
rootpath=<nfsserverip>:<pathname>
Previously you had to either accept all the dhcp parameters from the
server without the ability to locally provide the rootpath, or you had
to forego dhcp and set more vars (ipaddr, netmask, serverip, rootpath).
configuration from the FDT data, then set the pins into the requested
state. As part of this the gpio controller now reports the correct number
of pins instead of returning the number of bank * 32.
To allow for a future consolidated kernel we add the SOC_ALLWINNER_A10 and
SOC_ALLWINNER_A20 kernel options. These need to be set as appropriate for
the SoC the kernel will boot on.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5177
A10/A20 SoC. Based loosely on the submitters NetBSD driver, tested on
Cubieboard 2. Playback and capture are supported.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5202
dts files. It may be removed once it will be fixed upstream.
This is done just to supresses a warning during dtb evaluation as
there is no elm driver in tree at present.
least the audio codec driver currently in review.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5050
o Add kernel configuration for QEMU.
Both SPIKE and QEMU kernel configs are temporary (until
we will be able to obtain DTB from loader).
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
* Use the Linux compat string
* Use EARLY_DRIVER_MODULE to attach at the right time
* Add a generic A10 kernel config file
* A20 now use generic_timer
* Add two new dts files for Olimex boards
* Update our custom DTS file for A10 and A20 to use the same compatible
property names as the vendor ones.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4792
copyin and copyout code handle virtual addresses such that they will take
a virtual address and convert it into a valid physical address. It may
also mean we fail to boot as the elf files load address could be 0.
Sponsored by: ABT Systems Ltd
so will access data from an unrelocated address. This is only needed for
self relocating code on ARMv7, however this is true for both ubldr and
loader.efi, the only two loaders we support on ARMv7.
While here also force the fpu to be none as is done in libstand.
Sponsored by: ABT Systems Ltd
stores to clear it.
While here reduce the alignment of the data from 4k to 16 byte aligned.
This should be more than enough, without wasting too much space.
Sponsored by: ABT Systems Ltd
While the later is a better random generator than the former, the main
reason of the change is that random() has a better chance to work with
libstand(3).
At this time we don't include random number generators in bootforth
so this has no effect.
in boot1, like is normally done. When a keyboard appears in the UEFI
device tree, assume -D -h, just like on a BIOS boot.
# It is unclear if an ACPI keyboard appearing in the tree means there's
# a real keyboard or not. A USB keyboard doesn't seem to appear unless
# it is really there.
Differential Revision: https://reviews.freebsd.org/D5223
I previously disconnected kgzdr based on a misunderstanding.
I'd still like to transition to supporting only the loader(8)-based
boot path for handling compressed kernels, but that can follow the
standard deprecation procedure.
This reverts r291113.
Requested by: dteske
This causes boot from external media (installer USB image) to mount / from
the default ZFS BE, rather than the USB device.
Reported by: kmoore
MFC after: 5 days
Sponsored by: ScaleEngine Inc.
With warnings now enabled some plaforms where failing due to warnings.
* Fix st_size printed as a size_t when its actually an off_t.
* Fix pointer conversion in load_elf for some 32bit platforms due to 64bit
off in ef.
MFC after: 2 days
X-MFC-With:
Sponsored by: Multiplay
Fix EFI boot support when presented with multiple valid boot partitions
across multiple devices.
It now prefers to boot from partitions that are present on the underlying
device that the boot1 image was loaded from. This means that it will boot
from the partitions on device the user chose from EFI boot menu in
preference to those on other devices.
Also fixed is the recovery from a failed attempt to boot, from a seemingly
valid partition, by continuing to trying all other available partitions
no matter what the error.
boot1 now use * to signify a partition what was accepted from the preferred
device and + otherwise.
Finally some error messages where improved and DPRINTF's with slowed boot
to aid debugging.
ZFS will still be preferred over UFS when both are available on the boot
device.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5108
to open the device in exclusive mode as, without this, the firmware may
also be reading packets off the interface leading to a race.
Reviewed by: emaste
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4132
This is the final step required allowing to compile and to run RISC-V
kernel and userland from HEAD.
RISC-V is a completely open ISA that is freely available to academia
and industry.
Thanks to all the people involved! Special thanks to Andrew Turner,
David Chisnall, Ed Maste, Konstantin Belousov, John Baldwin and
Arun Thomas for their help.
Thanks to Robert Watson for organizing this project.
This project sponsored by UK Higher Education Innovation Fund (HEIF5) and
DARPA CTSRD project at the University of Cambridge Computer Laboratory.
FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv
Reviewed by: andrew, emaste, kib
Relnotes: Yes
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4982
make it possible for efi_console to recognize and translate box characters
on i386 build (unsigned versus signed char passed as int issue).
Submitted by: Toomas Soome <tsoome at me.com>
Reviewed by: emaste, smh, dteske
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D4993
hate adding yet another define, but it is the lessor of the evil
choices available. Kill another evil by removing PATH_BOOT3 and
replacing it with PATH_LOADER or PATH_LOADER_ZFS as appropriate.
PR: 206659
boot1 to pass in files with newlines in them. Now that the EFI loader
groks foo=bar on the command line, this can allow a more general setup
than traditional boot loader args will allow.
Differential Revision: https://reviews.freebsd.org/D5038
Simple bus space stubs require the VA-PA mapping
to be identical.
Approved by: hselasky, cognet (mentor)
Differential revision: https://reviews.freebsd.org/D4314
Remove old header from the include list and declare extern symbol
for delay() function.
Approved by: hselasky, cognet (mentor)
Differential revision: https://reviews.freebsd.org/D5012
When processing loader.conf if console contained an entry for an unsupported
console then cons_set would return an error refusing to set any console.
This has two side effects:
1. Forth would throw a syntax error and stop processing loader.conf at that
point.
2. The value of console is ignored.
#1 Means other important loader.conf entries may not be processed, which is
clearly undesirable.
#2 Means the users preference for console aren't applied even if they did
contain valid options. Now we have support for multi boot paths from a
single image e.g. bios and efi mode the console preference needs to deal
with the need to set preference for more than one source.
Fix this by:
* Returning CMD_OK where possible from cons_set.
* Allowing set with at least one valid console to proceed.
Reviewed by: allanjude
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5018
EFI was mixing caching in two separate places causing issues when multiple
partitions where tested.
Eliminate this by removing fsstat and re-factoring fsread into fsread_size,
adding basic parameter validation.
Also:
* Enhance some error print outs.
* Fix compilation under UFS1_ONLY and UFS2_ONLY
* Use sizeof on vars instead of structs.
* Add basic parameter validation to fsread_size.
MFC after: 1 week
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4989
The .text, .bss, and .data sections claimed 16-byte alignment, but were
only aligned to 8 by the linker script.
Discovered with elfcopy(1) from elftoolchain, which performs validation
absent from the binutils strip(1). ELF tool chain ticket #512.
Reported by: brooks
Reviewed by: brooks
Sponsored by: DARPA, AFRL
Invalid (in FreeBSD) definition of PCI controller was
replaced with another one, working in FreeBSD environment.
PCI controller's entry had to move from its parent node
so as to be recognized properly by FBSD.
PCI was enabled in kernel configuration file.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4379
uart_dev_ns8250 now relies on compatible property instead of additional
'busy-detect' cell. All drivers with compatible = "snps,dw-apb-uart" have
busy detection turned on. DTS files of devices affected by the change
were modified and 'busy-detect' property was removed.
Reviewed by: andrew, ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4218
Ranges property of 'soc' node used two-cell addresses which resulted in
casting errors as simplebus resource allocation works with 32-bit u_long
variables. FDT ranges were simplified.
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4212
This commit introduces initial support for Marvell Armada38x platform.
Changes:
- Add common DTS files for Armada38x SoCs and DTS file for A388-GP
- Add ARMADA38X kernel configuration
- Add option SOC_MV_ARMADA38X and set MV_PCI_PORTS
- Add list of files to compile
- Implement get_tclk(), get_sar_value(), cpu_reset() functions
- Add CPU ID and SoC numbers
- Correct ifdefs in arm/mv/timer.c
Reviewed by: ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4210
This builds on the modular EFI loader support added r294060 adding a
module to provide ZFS boot support on EFI systems.
It should be noted that EFI uses a fixed size memory block for all
allocations performed by the loader so it may be necessary to tune this
size.
For example when building an image which uses mfs_root e.g. mfsbsd, adding
the following to /etc/make.conf would be needed to prevent EFI from running
out of memory when loading the mfs_root image.
EFI_STAGING_SIZE=128
Submitted by: Eric McCorkle
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Make EFI boot loader modular in preparation for adding ZFS support.
This is a partial commit of the D4515.
Submitted by: Eric McCorkle
Reviewed by: emaste (in part)
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4515
The boot code fsread was caching the result of meta data request and
reusing it even for calls with inode = 0, which is used to partitions
trigger a probe.
The result was that success was incorrectly returned for all partition
probes after the first valid success, even for partitions which are not
UFS.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Fix compiler warnings about dropping const qualifier by changing file_loadraw
name param to const, and updating method to make that the case (it was
abusing the variable).
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Silence a bogus compiler warning about indexing past the end of dn_bonus.
The ZFS code ensures this is not possible but the compiler can't determine
this so added an additional check to prevent this warning.
Sponsored by: Multiplay
As the in-tree GCC does not support __attribute__((ms_abi)) EFI can only
be built with Clang.
The EFI loader and boot1 validated this, but unused libefi was still built
causing issues under GCC after warnings where enabled by r293724.
Disable building all of EFI when the selected compiler is GCC.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Disable some compiler warnings for GCC (non-standard compiler) fixing
build failures introduced by r293724, which enabled WARNS in the EFI boot
code, when compiling with none standard compiler (GCC).
Raised by: ian
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Non-interactive forth command errors where silent even for critical issues
e.g. failing to load a required kernel module or mfs_root.
This resulted in later unexplained and hard to trace errors such as mount
root failures.
This introduces additional command return codes that are treated
appropriately by the non-interactive command processor (bf_command).
* CMD_CRIT = print error
* CMD_FATAL = panic
Also fix minor style(9) issues with command_load return codes.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
infinitely less buggy than code that is theoretically correct in some
alternate universe.
The uintfptr_t type is apparently a freebsd invention, and exists only when
compiling the kernel. It's a little hard to say for sure, since it doesn't
seem to be documented anywhere except in email advice to unsuspecting and
overly-trusting souls, who then get to wear the pointy hat for blindly
following advice without investigating or testing it first.
because rounding down cannot increase the number of bits needed to express
the result.
I had no idea there was such a thing as uintfptr_t.
Requested by: bde
Set WARNS if not set for EFI boot code and fix the issues highlighted by
setting it.
Most components are set to WARNS level 6 with few being left at lower
levels due to the amount of changes needed to fix at higher levels.
Error types fixed:
* Missing / invalid casts
* Missing inner structs
* Unused vars
* Missing static for internal only funcs
* Missing prototypes
* Alignment changes
* Use of uninitialised vars
* Unknown pragma (intrinsic)
* Missing types etc due to missing includes
* printf formatting types
Reviewed by: emaste (in part)
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4839
member secsz was a uint16_t
sys/boot/zfs/zfs.c has a probe args structure member, secsz, that is a
uint16_t for media sector size; it is used as an argument for ioctl()
at line 484. however, this ioctl writes 32 bits of data (u_int *) and
therefore this ioctl will overwrite and corrupt 16 bits of memory.
other use cases seem to use correct u_int type for secsz.
PR: 204358
Submitted by: Toomas Soome <tsoome at me.com>
Reviewed by: asomers, delphij, smh
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D4811
When called to early, new_currdev->d_type was not yet set
zfs_fmtdev() would then return null
While here, guard call to init_zfs_bootenv with if d_type == DEVT_ZFS
Reported by: tsoome at me.com
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
Remove the printf("Not ufs\n") from the boot code which was hidden by the
local printf implementations, allowing these to have that code removed too.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
ARM and i386 already required libstand so switch to using it for all
patforms, allowing the removal of custom print and memory methods.
This is also a pre-cursor to enabling WARNS which highlighted a number
of issues with the removed methods.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Add a few other safeguards to ensure things do not break when the
boot device cannot be determined
Reported by: flo
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
Userboot's copy of the libstand Makefile had more extensive changes
compared to the one in sys/boot/libstand32, but it turns out these are
not intentional and we can just include lib/libstand/Makefile as done
for libstand32 in r293040.
Reviewed by: imp, jhb
Tested by: allanjude
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4793
r279533 increased the boot1 size from 64k to 128k but didn't regenerate the
fat templates, hence the change was never activated.
With recent and upcoming changes the efi boot1 binary is now > 64k.
To avoid fat corruption in the created boot images regenerate the
templates to activate the boot1 size increase.
MFC after: 2 weeks
X-MFC-With: r293268
This is based on the vidconsole implementation.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: adrian
MFC after: 2 weeks
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4797
a problem on 32-bit systems which have ram occupying the end of the physical
address space -- for example, a block of ram at 0x80000000 with a size of
0x80000000 was overflowing 32 bit math and ending up with a calculated size
of zero.
This is a fix for one of the two problems mentioned in the PR. Something
similar will need to be done on the kernel side before the PR is closed.
PR: 201614
providing compiled-in static environment data that is used instead of any
data passed in from a boot loader.
Previously 'env' worked only on i386 and arm xscale systems, because it
required the MD startup code to examine the global envmode variable and
decide whether to use static_env or an environment obtained from the boot
loader, and set the global kern_envp accordingly. Most startup code wasn't
doing so. Making things even more complex, some mips startup code uses an
alternate scheme that involves calling init_static_kenv() to pass an empty
buffer and its size, then uses a series of kern_setenv() calls to populate
that buffer.
Now all MD startup code calls init_static_kenv(), and that routine provides
a single point where envmode is checked and the decision is made whether to
use the compiled-in static_kenv or the values provided by the MD code.
The routine also continues to serve its original purpose for mips; if a
non-zero buffer size is passed the routine installs the empty buffer ready
to accept kern_setenv() values. Now if the size is zero, the provided buffer
full of existing env data is installed. A NULL pointer can be passed if the
boot loader provides no env data; this allows the static env to be installed
if envmode is set to do so.
Most of the work here is a near-mechanical change to call the init function
instead of directly setting kern_envp. A notable exception is in xen/pv.c;
that code was originally installing a buffer full of preformatted env data
along with its non-zero size (like mips code does), which would have allowed
kern_setenv() calls to wipe out the preformatted data. Now it passes a zero
for the size so that the buffer of data it installs is treated as
non-writeable.
libstand is built in three places (lib/libstand, sys/boot/libstand32,
and sys/boot/userboot/libstand). Reduce Makefile duplication by
.including libstand/Makefile from sys/boot/libstand32/Makefile.
sys/boot/userboot/libstand/Makefile will be addressed later, as it
contains additional differences yet to be handled.
This change also switches libstand32 to use the new uuid_from_string
and uuid_to_string, which was not included in r292473.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4747
If the system was booted with ZFS, a new menu item (#7) appears
It contains an autogenerated list of ZFS Boot Environments
This allows the user to switch to an alternate root file system
Use Cases:
- Revert a failed upgrade
- Concurrently run different versions of FreeBSD with common home directory
- Easier integration with the sysadmin/beadm utility
Requested by: many
Reviewed by: dteske
MFC after: 10 days
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3167
Thinking this through, and looking at process_assignment, I believe
moving the code would be wrong considering that set_conf_files is
called in one condition while set_nextboot_conf is guarded by a
different condition of having nextboot_enable="YES". So these must
stay separated and not combined.
MFC after: 1 week
Fix erroneous error path in error messages when processing boot_conf.
Fixup stack comments for functions introduced by SVN r97201.
Remove a questioning stack comment introduced by SVN r186789.
NB: Comment removed because strdup usage here is correct/not a leak.
MFC after: 1 week
empty ldvar (which amounts to the varname string starting with '=') into
the if block that manipulates ldvar, which avoids later referencing ldvar
when it was never initialized.
Submitted by: Thomas Skibo
Pointy hat: ian
magic number to use V86_CY() instead. These should have been fixed as
part of the cleanup in r226746 but were missed.
The md5 sums of the object files were unchanged, so there should be no
functional change.
PR: 205424
Submitted by: Alexander Kuleshov <kuleshovmail@gmail.com>
MFC after: 1 week
i386 is the only current FreeBSD architecture that ever used a.out
format.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4687
Examine each cmdline arg and if it contains an '=' convert it to ascii and
pass it to putenv(). This allows var=value settings to come in on the
command line.
This will allow overriding dhcp server-provided data in loader(8), as
discussed in PR 202098
PR: 202098
Differential Revision: https://reviews.freebsd.org/D4561
EFI return values set the high bit to indicate an error. The log
messages changed here are printed only in the case of an error,
so including the error bit is redundant. Also switch to decimal to
match the error definitions (in sys/boot/efi/include/efierr.h).
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
If ExitBootServices fails due to a changed efi_mapkey then GetMemoryMap
must be called again. In this case it is also possible for the memory
map to grow, so repeat the initial GetMemoryMap call to fetch the new
size.
Also roll bi_add_efi_data_and_exit into bi_load_efi_data as there's no
need for it to be a separate function.
PR: 202455
Reported by: Berislav Purgar <bpurgar@gmail.com>
Tested by: Berislav Purgar <bpurgar@gmail.com>
Reviewed by: kib
MFC after: 1 week
MFC with: r292338
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4621
EFI return values set the high bit to indicate an error. The log
messages changed here are printed only in the case of an error,
so including the error bit is redundant. Also switch to decimal to
match the error definitions (in sys/boot/efi/include/efierr.h).
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
pxeboot in tftp loader mode (when built with LOADER_TFTP_SUPPORT) now
prefix all the path to open with the path obtained via the option 'root-path'
directive.
This allows to be able to use the traditional content /boot out of box. Meaning
it now works pretty much like all other loaders. It simplifies hosting hosting
multiple version of FreeBSD on a tftp server.
As a consequence, pxeboot does not look anymore for a pxeboot.4th (which was
never provided)
Note: that pxeboot in tftp loader mode is not built by default.
Reviewed by: rpokala
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D4590
The EFI memory map may change before or during the first
ExitBootServices call. In that case ExitBootServices returns an error,
and GetMemoryMap and ExitBootServices must be retried.
Glue together calls to GetMemoryMap(), ExitBootServices() and storage of
(now up-to-date) MODINFOMD_EFI_MAP metadata within a single function.
That new function - bi_add_efi_data_and_exit() - uses space previously
allocated in bi_load_efi_data() to store the memory map (it will fail if
that space is too short). It handles re-calling GetMemoryMap() once to
update the map key if necessary. Finally, if ExitBootServices() is
successful, it stores the memory map and its header as MODINFOMD_EFI_MAP
metadata.
ExitBootServices() calls are now done earlier, from within arch-
independent bi_load() code.
PR: 202455
Submitted by: Ganael LAPLANCHE
Reviewed by: kib
MFC after: 2 weeks
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4296
directly into a loader (and thus kernel) env var, using the syntax
ubenv import ldvarname=ubvarname
Without the varname= prefix it uses the historical behavior of importing
to the name uboot.ubvarname.
When we are detecting a partition table and didn't find PMBR, try to
read backup GPT header from the last sector and if it is correct,
assume that we have GPT.
Reviewed by: rpokala
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D4282
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
Previous value was not enough on Arndale platform.
Reviewed by: hselasky
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4145
During cv_wait we may be waiting for an event triggered by callout.
Run callbacks here to avoid code blocking.
Reviewed by: hselasky
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4144
The initial IOCTL implementation supports reading disk physical
geometry.
Two additional functions were added. They allow reading/writing raw
data to the disk (default partition).
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4143
The detach function is called very often, for example from
get_capacity function. We don't want to loose any pointers
here, so disable detaching for umass driver.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4141
The PA adress must be gathered from an aligned VA,
not the RAW pointer to the memory space.
Reviewed by: hselasky
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4140
Tracking these leads to situations where meta mode will consider the
file to be out of date if /bin/sh or /bin/ln are newer than the source
file. There's no reason for meta mode to do this as make is already
handling the rebuild dependency fine.
Sponsored by: EMC / Isilon Storage Division
No behavioral changes, just cosmetics.
A partition number of zero is not a wildcard, it's the 'a' partition in
a BSD slice, so don't print it as "<auto>". (Only slices are 1-based,
unit and partition numbers are 0-based and -1 is their wildcard marker.)
Also, after doing all the probing and choosing, print the final result as
"Booting from <disk spec>" where disk spec has all the wildcards resolved
and looks like familiar BSD slice-and-partition notation (disk0s3a, etc).
This was [re-]added in r127458 (apparently with disconnected history as well)
and never connected to the build.
It is no longer relevant for modern systems from the past 20 years.
Discussed with: jhb
Sponsored by: EMC / Isilon Storage Division
Zybo needs its own DTB and has a different PHY, so add it to
the base kernel. Details on building bootable SD images at
http://www.thomasskibo.com/zedbsd/
Submitted By: Thomas Skibo
