Even though we got rid of device major numbers some time ago, device
drivers still need to provide unique device minor numbers to make_dev().
These numbers are only used inside the kernel. They are not related to
device major and minor numbers which are visible in devfs. These are
actually based on the inode number of the device.
It would eventually be nice to remove minor numbers entirely, but we
don't want to be too agressive here.
Because the 8-15 bits of the device number field (si_drv0) are still
reserved for the major number, there is no 1:1 mapping of the device
minor and unit numbers. Because this is now unused, remove the
restrictions on these numbers.
The MAXMAJOR definition was actually used for two purposes. It was used
to convert both the userspace and kernelspace device numbers to their
major/minor pair, which is why it is now named UMINORMASK.
minor2unit() and unit2minor() have now become useless. Both minor() and
dev2unit() now serve the same purpose. We should eventually remove some
of them, at least turning them into macro's. If devfs would become
completely minor number unaware, we could consider using si_drv0 directly,
just like si_drv1 and si_drv2.
Approved by: philip (mentor)
Right now we perform some of the checks inside the fcntl()'s F_DUPFD
operation twice. We first validate the `fd' argument. When finished,
we validate the `arg' argument. These checks are also performed inside
do_dup().
The reason we need to do this, is because fcntl() should return different
errno's when the `arg' argument is out of bounds (EINVAL instead of
EBADF). To prevent the redundant locking of the PROC_LOCK and
FILEDESC_SLOCK, patch do_dup() to support the error semantics required
by fcntl().
Approved by: philip (mentor)
Because clists are also used outside the TTY layer, rename the file
containing the clist routines to something more accurate.
The mpsafetty TTY layer doesn't use clists. It uses its own buffers,
which also implement the unbuffered copying to userspace. We cannot
simply remove the clist routines then, because this would break various
drivers that are present within the kernel.
Approved by: philip (mentor)
NET_NEEDS_GIANT. netatm has been disconnected from the build for ten
months in HEAD/RELENG_7. Specifics:
- netatm include files
- netatm command line management tools
- libatm
- ATM parts in rescue and sysinstall
- sample configuration files and documents
- kernel support as a module or in NOTES
- netgraph wrapper nodes for netatm
- ctags data for netatm.
- netatm-specific device drivers.
MFC after: 3 weeks
Reviewed by: bz
Discussed with: bms, bz, harti
refcount interface.
It also introduces the correct usage of memory barriers, as sometimes
fdrop() and fhold() are used with shared locks, which don't use any
release barrier.
ttyfree(), freeing the tty. Since destroy_dev() may call d_purge()
cdevsw method, that is the ttypurge() for the tty, the code ends up
accessing freed tty structure.
Put the ttyrel() after destroy_dev() in the ttyfree. To prevent the
panic the rev. 1.274 provided fix for, check the TS_GONE in sysctl
handler and refuse to provide information on such tty.
Reported, debugging help and tested by: pho
DIscussed with and reviewed by: jhb
MFC after: 1 week
in the giant_trick routines after the dev_refthread increments the
si_threadcount. Remove assert, do not perform dev_relthread() for failed
dev_refthread(), and handle failure in the tty_gettp() callers (cdevsw
tty methods).
Before kern_conf.c 1.210 and 1.211, the kernel usually paniced in the
giant_trick routines dereferencing NULL cdevsw, not taking this fault.
Reported by: Vince Hoffman <jhary unsane co uk>
Debugging help and tested by: pho
Reviewed by: jhb
MFC after: 1 week
For some reason, the <sys/tty.h> header file also contains routines of the
clists and console that are used inside the TTY layer. Because the clists
are not only used by the TTY layer (example: various input drivers), we'd
better move the entire clist programming interface into <sys/clist.h>. Also
remove a declaration of nonexistent variable.
The <sys/tty.h> header also contains various definitions for the console
code (tty_cons.c). Also move these to <sys/cons.h>, because they are
not implemented inside the TTY layer.
While there, create separate malloc pools for the clist and console code.
Approved by: philip (mentor)
PIPE_MTX().
Since the pipe_present is cleared before (potentially) sleeping, the
second thread may enter the pipeclose() for the reciprocal pipe end.
The test at the end of the pipeclose() for the pipe_present == 0 would
succeed, allowing the second thread to free the pipe memory. First
threads then accesses the freed memory after being woken up.
Properly track the closing state of the pipe in the pipe_present.
Introduce the intermediate state that marks the pipe as mostly
dismantled but might be sleeping waiting for the knote list to be
cleared. Free the pipe pair memory only when both ends pass that point.
Debugging help and tested by: pho
Discussed with: jmg
MFC after: 2 weeks
monitoring the pipe. The code sets pipe_present = 0 and enters
knlist_cleardel(), where the PIPE_MTX might be dropped when knl->kl_list
cannot be cleared due to influx knotes.
If the following often encountered code fragment
if (!(kn->kn_status & KN_DETACHED))
kn->kn_fop->f_detach(kn);
knote_drop(kn, td); [1]
is executed while the knlist lock is dropped, then the knote memory is freed
by the knote_drop() without knote being removed from the knlist, since
the filt_pipedetach() contains the following:
if (kn->kn_filter == EVFILT_WRITE) {
if (!cpipe->pipe_peer->pipe_present) {
PIPE_UNLOCK(cpipe);
return;
Now, the memory may be reused in the zone, causing the access to the
freed memory. I got the panics caused by the marker knote appearing on
the knlist, that, I believe, manifestation of the issue. In the Peter
Holm test scenarious, we got unkillable processes too.
The pipe_peer that has the knote for write shall be present. Ignore the
pipe_present value for EVFILT_WRITE in filt_pipedetach().
Debugging help and tested by: pho
Discussed with: jmg
MFC after: 2 weeks
the elf files. This is complicated by the fact that the actual CTF
parsing has to be done in CDDL'd code, so the BSD licensed code only
knows about the opaque data which it must be able to free.
argument, call mac_socket_check_connect() on that address before
proceeding with the send. Otherwise policies instrumenting the
connect entry point for the purposes of checking destination
addresses will not have the opportunity to check implicit
connect requests.
MFC after: 3 weeks
Sponsored by: nCircle Network Security, Inc.
The patch does not change the cdevsw KBI. Management of the data is
provided by the functions
int devfs_set_cdevpriv(void *priv, cdevpriv_dtr_t dtr);
int devfs_get_cdevpriv(void **datap);
void devfs_clear_cdevpriv(void);
All of the functions are supposed to be called from the cdevsw method
contexts.
- devfs_set_cdevpriv assigns the priv as private data for the file
descriptor which is used to initiate currently performed driver
operation. dtr is the function that will be called when either the
last refernce to the file goes away, the device is destroyed or
devfs_clear_cdevpriv is called.
- devfs_get_cdevpriv is the obvious accessor.
- devfs_clear_cdevpriv allows to clear the private data for the still
open file.
Implementation keeps the driver-supplied pointers in the struct
cdev_privdata, that is referenced both from the struct file and struct
cdev, and cannot outlive any of the referee.
Man pages will be provided after the KPI stabilizes.
Reviewed by: jhb
Useful suggestions from: jeff, antoine
Debugging help and tested by: pho
MFC after: 1 month
data via ctor and dtor event handlers.
The size of the extra data is allocated opaquely and this file
contains a function which the dtrace module can call to check
that the kernel supports at least the amount of data that it needs.
This file is optionally compiled into nthe kernel if the KDTRACE_HOOKS
kernel option is defined.
This is BSD licensed code written specifically for FreeBSD.
It initialises using SYSINIT so that the SDT provider, probe and
argument description linkage is done whenever a module is loaded,
regardless of whether the DTrace modules are loaded or not.
This file is optionally compiled into the kernel if the KDTRACE_HOOKS
option is defined.
devsoftc.async_proc != NULL because the latter might not be true
sometimes.
This way /etc/rc.suspend gets executed.
Reviwed by: njl
Submitted by: Mitsuru IWASAKI <iwasaki at jp.FreeBSD.org>
Tested also by: Andreas Wetzel <mickey242 at gmx.net>
MFC after: 1 week
(all types) used per socket buffer.
Add support to netstat to print out all of the socket buffer
statistics.
Update the netstat manual page to describe the new -x flag
which gives the extended output.
Reviewed by: rwatson, julian
lock_object, using an unified field called lo_data.
- Replace lo_type usage with the w_name usage and at init time pass the
lock "type" directly to witness_init() from the parent lock init
function. Handle delayed initialization before than
witness_initialize() is called through the witness_pendhelp structure.
- Axe out LO_ENROLLPEND as it is not really needed. The case where the
mutex init delayed wants to be destroyed can't happen because
witness_destroy() checks for witness_cold and panic in case.
- In enroll(), if we cannot allocate a new object from the freelist,
notify that to userspace through a printf().
- Modify the depart function in order to return nothing as in the current
CVS version it always returns true and adjust callers accordingly.
- Fix the witness_addgraph() argument name prototype.
- Remove unuseful code from itismychild().
This commit leads to a shrinked struct lock_object and so smaller locks,
in particular on amd64 where 2 uintptr_t (16 bytes per-primitive) are
gained.
Reviewed by: jhb
used to request superpage alignment for the submap.
Request superpage alignment for the kmem_map.
Pass VMFS_ANY_SPACE instead of TRUE to vm_map_find(). (They are currently
equivalent but VMFS_ANY_SPACE is the new preferred spelling.)
Remove a stale comment from kmem_malloc().
hand, it may cause other threads to sleep since kqueue_scan() may mark
some knotes as infux. This could lead to the deadlock.
Before kqueue_scan() sleeps, wakeup the threads that are waiting for the
influx knotes produced by this thread.
Tested by: pho (previous version)
Reviewed by: jmg
MFC after: 2 weeks
closed is the legitimate situation. For instance, filedescriptor with
registered events may be closed in parallel with closing the kqueue.
Properly handle the case instead of asserting that this cannot happen.
Reported and tested by: pho
Reviewed by: jmg
MFC after: 2 weeks
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)
Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.
From my notes:
-----
One thing where FreeBSD has been falling behind, and which by chance I
have some time to work on is "policy based routing", which allows
different
packet streams to be routed by more than just the destination address.
Constraints:
------------
I want to make some form of this available in the 6.x tree
(and by extension 7.x) , but FreeBSD in general needs it so I might as
well do it in -current and back port the portions I need.
One of the ways that this can be done is to have the ability to
instantiate multiple kernel routing tables (which I will now
refer to as "Forwarding Information Bases" or "FIBs" for political
correctness reasons). Which FIB a particular packet uses to make
the next hop decision can be decided by a number of mechanisms.
The policies these mechanisms implement are the "Policies" referred
to in "Policy based routing".
One of the constraints I have if I try to back port this work to
6.x is that it must be implemented as a EXTENSION to the existing
ABIs in 6.x so that third party applications do not need to be
recompiled in timespan of the branch.
This first version will not have some of the bells and whistles that
will come with later versions. It will, for example, be limited to 16
tables in the first commit.
Implementation method, Compatible version. (part 1)
-------------------------------
For this reason I have implemented a "sufficient subset" of a
multiple routing table solution in Perforce, and back-ported it
to 6.x. (also in Perforce though not always caught up with what I
have done in -current/P4). The subset allows a number of FIBs
to be defined at compile time (8 is sufficient for my purposes in 6.x)
and implements the changes needed to allow IPV4 to use them. I have not
done the changes for ipv6 simply because I do not need it, and I do not
have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.
Other protocol families are left untouched and should there be
users with proprietary protocol families, they should continue to work
and be oblivious to the existence of the extra FIBs.
To understand how this is done, one must know that the current FIB
code starts everything off with a single dimensional array of
pointers to FIB head structures (One per protocol family), each of
which in turn points to the trie of routes available to that family.
The basic change in the ABI compatible version of the change is to
extent that array to be a 2 dimensional array, so that
instead of protocol family X looking at rt_tables[X] for the
table it needs, it looks at rt_tables[Y][X] when for all
protocol families except ipv4 Y is always 0.
Code that is unaware of the change always just sees the first row
of the table, which of course looks just like the one dimensional
array that existed before.
The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
are all maintained, but refer only to the first row of the array,
so that existing callers in proprietary protocols can continue to
do the "right thing".
Some new entry points are added, for the exclusive use of ipv4 code
called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
which have an extra argument which refers the code to the correct row.
In addition, there are some new entry points (currently called
rtalloc_fib() and friends) that check the Address family being
looked up and call either rtalloc() (and friends) if the protocol
is not IPv4 forcing the action to row 0 or to the appropriate row
if it IS IPv4 (and that info is available). These are for calling
from code that is not specific to any particular protocol. The way
these are implemented would change in the non ABI preserving code
to be added later.
One feature of the first version of the code is that for ipv4,
the interface routes show up automatically on all the FIBs, so
that no matter what FIB you select you always have the basic
direct attached hosts available to you. (rtinit() does this
automatically).
You CAN delete an interface route from one FIB should you want
to but by default it's there. ARP information is also available
in each FIB. It's assumed that the same machine would have the
same MAC address, regardless of which FIB you are using to get
to it.
This brings us as to how the correct FIB is selected for an outgoing
IPV4 packet.
Firstly, all packets have a FIB associated with them. if nothing
has been done to change it, it will be FIB 0. The FIB is changed
in the following ways.
Packets fall into one of a number of classes.
1/ locally generated packets, coming from a socket/PCB.
Such packets select a FIB from a number associated with the
socket/PCB. This in turn is inherited from the process,
but can be changed by a socket option. The process in turn
inherits it on fork. I have written a utility call setfib
that acts a bit like nice..
setfib -3 ping target.example.com # will use fib 3 for ping.
It is an obvious extension to make it a property of a jail
but I have not done so. It can be achieved by combining the setfib and
jail commands.
2/ packets received on an interface for forwarding.
By default these packets would use table 0,
(or possibly a number settable in a sysctl(not yet)).
but prior to routing the firewall can inspect them (see below).
(possibly in the future you may be able to associate a FIB
with packets received on an interface.. An ifconfig arg, but not yet.)
3/ packets inspected by a packet classifier, which can arbitrarily
associate a fib with it on a packet by packet basis.
A fib assigned to a packet by a packet classifier
(such as ipfw) would over-ride a fib associated by
a more default source. (such as cases 1 or 2).
4/ a tcp listen socket associated with a fib will generate
accept sockets that are associated with that same fib.
5/ Packets generated in response to some other packet (e.g. reset
or icmp packets). These should use the FIB associated with the
packet being reponded to.
6/ Packets generated during encapsulation.
gif, tun and other tunnel interfaces will encapsulate using the FIB
that was in effect withthe proces that set up the tunnel.
thus setfib 1 ifconfig gif0 [tunnel instructions]
will set the fib for the tunnel to use to be fib 1.
Routing messages would be associated with their
process, and thus select one FIB or another.
messages from the kernel would be associated with the fib they
refer to and would only be received by a routing socket associated
with that fib. (not yet implemented)
In addition Netstat has been edited to be able to cope with the
fact that the array is now 2 dimensional. (It looks in system
memory using libkvm (!)). Old versions of netstat see only the first FIB.
In addition two sysctls are added to give:
a) the number of FIBs compiled in (active)
b) the default FIB of the calling process.
Early testing experience:
-------------------------
Basically our (IronPort's) appliance does this functionality already
using ipfw fwd but that method has some drawbacks.
For example,
It can't fully simulate a routing table because it can't influence the
socket's choice of local address when a connect() is done.
Testing during the generating of these changes has been
remarkably smooth so far. Multiple tables have co-existed
with no notable side effects, and packets have been routes
accordingly.
ipfw has grown 2 new keywords:
setfib N ip from anay to any
count ip from any to any fib N
In pf there seems to be a requirement to be able to give symbolic names to the
fibs but I do not have that capacity. I am not sure if it is required.
SCTP has interestingly enough built in support for this, called VRFs
in Cisco parlance. it will be interesting to see how that handles it
when it suddenly actually does something.
Where to next:
--------------------
After committing the ABI compatible version and MFCing it, I'd
like to proceed in a forward direction in -current. this will
result in some roto-tilling in the routing code.
Firstly: the current code's idea of having a separate tree per
protocol family, all of the same format, and pointed to by the
1 dimensional array is a bit silly. Especially when one considers that
there is code that makes assumptions about every protocol having the
same internal structures there. Some protocols don't WANT that
sort of structure. (for example the whole idea of a netmask is foreign
to appletalk). This needs to be made opaque to the external code.
My suggested first change is to add routing method pointers to the
'domain' structure, along with information pointing the data.
instead of having an array of pointers to uniform structures,
there would be an array pointing to the 'domain' structures
for each protocol address domain (protocol family),
and the methods this reached would be called. The methods would have
an argument that gives FIB number, but the protocol would be free
to ignore it.
When the ABI can be changed it raises the possibilty of the
addition of a fib entry into the "struct route". Currently,
the structure contains the sockaddr of the desination, and the resulting
fib entry. To make this work fully, one could add a fib number
so that given an address and a fib, one can find the third element, the
fib entry.
Interaction with the ARP layer/ LL layer would need to be
revisited as well. Qing Li has been working on this already.
This work was sponsored by Ironport Systems/Cisco
Reviewed by: several including rwatson, bz and mlair (parts each)
Obtained from: Ironport systems/Cisco
and its children in the form:
"parent","child"
so that head and bottom of an oriented graph can be easilly detected and
various form of diagrams can be build.
The sysctl is called debug.witness.graphs and it is read-only; in order
to get the list of relations, a simple:
#sysctl debug.witness.graphs
will do the trick.
This approach has been choosen in order to support easilly things like
the DOT format and such. Soon, an auto-explicative awk script, which
filters simple informations returned by the sysctl and converts them into
a real DOT script, will be committed to the repository between examples.
Discussed with: rwatson
method:
- If the last of the child cpufreq drivers returns an error while trying to
fetch its list of supported frequencies but an earlier driver found the
requested frequency, don't return an error to the caller.
- If all of the child cpufreq drivers fail and the attempt to match the
frequency based on 'cpu_est_clockrate()' fails, return ENXIO rather than
returning success and returning a frequency of CPUFREQ_VAL_UNKNOWN.
MFC after: 3 days
PR: kern/121433
Reported by: Eugene Grosbein eugen ! kuzbass dot ru
ALT_BREAK_TO_DEBUGGER. In addition to "Enter ~ ctrl-B" (to enter the
debugger), there is now "Enter ~ ctrl-P" (force panic) and
"Enter ~ ctrl-R" (request clean reboot, ala ctrl-alt-del on syscons).
We've used variations of this at work. The force panic sequence is
best used with KDB_UNATTENDED for when you just want it to dump and
get on with it.
The reboot request is a safer way of getting into single user than
a power cycle. eg: you've hosed the ability to log in (pam, rtld, etc).
It gives init the reboot signal, which causes an orderly reboot.
I've taken my best guess at what the !x86 and non-sio code changes
should be.
This also makes sio release its spinlock before calling KDB/DDB.
mount fs needing Giant to be held when processing bufobjs.
Use a different subqueue for pending workitems on filesystems requiring
Giant. This simplifies the code notably and also reduces the number of
Giant acquisitions (and the whole processing cost).
Suggested by: jeff
Reviewed by: kib
Tested by: pho
