Commit Graph

6188 Commits

Author SHA1 Message Date
Ulrich Spörlein
06d85cc61f gsched(8) was first released with FreeBSD 8.1
MFC after:	3 days
2010-07-30 12:56:34 +00:00
Pawel Jakub Dawidek
3d3063c0b3 Fix typo.
PR:		docs/149033
Submitted by:	Kolar <hsn@sendmail.cz>
MFC after:	3 days
2010-07-29 20:16:12 +00:00
Ulf Lilleengen
5bf0842244 - Avoid calling the copy constructor when it is not necessary. 2010-07-29 16:06:40 +00:00
Ulf Lilleengen
a75716fc2d - Remove unused instance of string. 2010-07-29 16:01:10 +00:00
Benedict Reuschling
629ce700d5 Small typo fix: s/ommited/omitted
PR:             docs/148977
Submitted by:   Warren Block (wblock at wonkity dot com)
MFC after:      4 days
2010-07-27 17:23:40 +00:00
Gleb Smirnoff
fa597729aa Document that the "ngtee" action no longer accepts packet, and
thus don't depend on one_pass flag anymore.

This is a POLA violation, but it is quite difficult to restore
the old behavior with new code. Also, the new behavior matches
behavior of the older "tee" action, and this is more intuitive.
2010-07-27 14:31:39 +00:00
Alexander Motin
8edcf69406 Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
GEOM. This information needed for proper soft-RAID's on-disk metadata
reading and writing.
2010-07-25 15:43:52 +00:00
Benedict Reuschling
2c396c7a30 Clarify that the "number of bytes per sector"-range in the
-S option is meant to be "inclusive".

The original issue of the PR was already fixed.

PR:                 docs/142418
Submitted by:       David Naylor (naylor dot b dot david at gmail dot com)
No objection from:  kib
MFC after:          5 days
2010-07-25 11:31:29 +00:00
Kirk McKusick
5ee561ee3e Note that foreground fsck should be run after a filesystem related panic.
Suggested by:   Mikhail Teterin (mi@)
MFC after:      1 week
2010-07-23 14:35:51 +00:00
Andrey V. Elsukov
959059ef9e Document that SI unit suffixes are supported for -b and -s options
of add verb. Mention about maximum size limit for "freebsd-boot"
partition. It should be smaller than 545 KB (hardcoded in pmbr).
Show usage of SI unit suffixes in example.

Approved by:	mav (mentor)
MFC after:	1 week
2010-07-23 11:00:43 +00:00
Kirk McKusick
90104f5413 Note that foreground fsck should be run after a filesystem related panic.
Suggested by:	Mikhail Teterin (mi@)
MFC after:	1 week
2010-07-22 18:33:10 +00:00
Pawel Jakub Dawidek
1a517c3ec5 Actually, only the fullsync mode is implemented, not memsync mode.
Correct manual page.

MFC after:	3 days
2010-07-22 08:30:14 +00:00
Luigi Rizzo
f40be7f6f9 better printing of headers when listing flows 2010-07-15 14:34:56 +00:00
Alexander Motin
bb160d3d4b Do not bzero() NULL pointer on malloc() error.
Submitted by:	Dmitry Luhtionov
2010-07-14 15:14:00 +00:00
Maxim Konovalov
8173b7ae76 o Restore missed flag in the synopsis.
PR:		docs/148534
Submitted by:	Warren Block
MFC after:	1 week
2010-07-13 04:30:50 +00:00
Maxim Konovalov
b464045202 o Add -q flag to usage().
MFC after:	1 week
2010-07-13 04:13:31 +00:00
Maxim Konovalov
d7e1af0a5b o Add -q flag to the synopsis.
PR:		docs/148535
Submitted by:	Warren Block
MFC after:	1 week
2010-07-13 04:11:25 +00:00
Brian Somers
6964abef83 When dhclient obtains a lease, it runs dhclient-script and expects
it to configure the interface.  When the script is complete, dhclient
monitors the routing socket and will terminate if its address is
deleted or if its interface is removed or brought down.

Because the routing socket is already open when dhclient-script is
run, dhclient ignores address deletions for 10 seconds after the
script was run.

If the address that will be obtained is already configured on the
interface before dhclient starts, and if dhclient-script takes more
than 10 seconds (perhaps due to dhclient-*-hooks latencies), on script
completion, dhclient will immediately and silently exit when it sees
the RTM_DELADDR routing message resulting from the script reassigning
the address to the interface.

This change logs dhclient's reason for exiting and also changes the
10 second timeout to be effective from completion of dhclient-script
rather than from when it was started.

We now ignore RTM_DELADDR and RTM_NEWADDR messages when the message
contains no interface address (which should not happen) rather than
exiting.

Not reviewed by:	brooks (timeout)
MFC after:		3 weeks
2010-07-07 06:06:54 +00:00
Jeff Roberson
24d37c1eec - Permit zero length directories as a handled inconsistency. This allows
directory truncation to proceed before the link has been cleared.  This
   is accomplished by detecting a directory with no . or .. links and
   clearing the named directory entry in the parent.
 - Add a new function ino_remref() which handles the details of removing
   a reference to an inode as a result of a lost directory.  There were
   some minor errors in various subcases of this routine.
2010-07-06 07:07:29 +00:00
Matt Jacob
5d8d4137df Fix the clear function which has been broken for a bit.
MFC after:	1 week
2010-07-04 22:17:56 +00:00
Benedict Reuschling
d3f4dbc513 Let boot(8) refer to the uart(4) serial driver, which is the replacement
for the obsolete sio(4) driver.

PR:             docs/144498
Submitted by:   Bruce Cran (bruce at cran dot org dot uk)
Approved by:    marcel
MFC after:      2 weeks
2010-07-04 20:39:07 +00:00
Marcel Moolenaar
9a84deb804 sysctlbyname() returns -1 on error and sets errno. It does
not return the error itself.
2010-07-03 22:02:29 +00:00
Alexander Motin
72166fba33 Correct explanation for idle and standby subcommands' -t argument. 2010-07-01 14:10:55 +00:00
Jaakko Heinonen
049a97931c - Don't assign the return value from read(2) to a variable of type
int.
- Use errx(3) instead of err(3) to print the error message on short
  reads in readlabel(). errno won't be set on short reads which can
  easily occur here due to the fixed size read request.

PR:		144307
Reviewed by:	bde
2010-06-30 18:34:45 +00:00
Warner Losh
b8f92ce4de Expand system into my_system, and add the necessary tidyness that we
need.  Close the pidfile.  Then close all descriptors >= 3 to avoid
information leakage to children.

This solves the problem of not being able to restart devd when you
have, for example, a dhclient forked to configure your network...

MFC after:	3 days
2010-06-29 03:52:12 +00:00
Xin LI
edad602637 Improve fsck robustness for SU+J cases:
- Use err/errx only when the case is really fatal.  For other
   cases, fall back to full fsck instead of quiting fsck.
 - Plug a memory leak.
 - Avoid divide by zero when printing summary.
 - Output "FILE SYSTEM IS MARKED CLEAN" when a successful
   journal recovering is done.
 - When -f is specified, do full fsck instead of journal recovery.
2010-06-22 00:26:07 +00:00
Andrey V. Elsukov
02fc66090b Check for overflow before it occurs. Also add check for
negative numbers.

Suggested by:	ache
Approved by:	kib (mentor)
2010-06-21 12:50:54 +00:00
Andrey V. Elsukov
79d89bb0ab Remove G_TYPE_ASCLBA type and replace it with G_TYPE_STRING in gpart.
Move code that converts params from humanized numbers to sectors count
to subr.c and adjust comment.
Add post-processing for "size" and "start offset" params in gpart,
now they are properly converted to sectors count with known sector size
that can be greater that 512 bytes.
Also replace "unsigned long long" type to "off_t" for unify code since
it used for medium size in libgeom(3) and DIOCGMEDIASIZE ioctl.

PR:		bin/146277
Reviewed by:	marcel (previous version)
Approved by:	kib (mentor)
MFC after:	1 month
2010-06-21 08:24:50 +00:00
Ed Schouten
fafb8f11c0 Small style fixes:
- ANSIfy prototypes.
- Remove unneeded whitespace.
- Add const keyword to function where it can be used.
2010-06-20 12:52:33 +00:00
Brian Somers
48790afa7b Fix some style(9), although there's a lot more issues here.
Fix some casting errors.

PR:		142384
Submitted by:	giffunip at tutopia dot com
Obtained from:	NetBSD
MFC after:	3 weeks
2010-06-20 09:40:54 +00:00
Ulrich Spörlein
9eecb5528b mdoc nitpicking for gsched.8
- remove stray argument [1]
- remove stray whitespace
- use canonical wording for the HISTORY section

PR:		docs/147119 [1]
Submitted by:	Alexander Best <alexbestms@wwu.de> [1]
MFC after:	1 week
2010-06-19 18:52:37 +00:00
Rebecca Cran
99c1ee64f0 Call free and freeaddrinfo before exiting.
PR: bin/144730
PR: bin/144974
Submitted by: Earl R. Lapus <earl.lapus at gmail.com>
Approved by: rrs (mentor)
MFC after: 1 month
2010-06-16 15:49:17 +00:00
Pawel Jakub Dawidek
f3bd74124a Correct various log messages.
Submitted by:	Mikolaj Golub <to.my.trociny@gmail.com>
MFC after:	3 days
2010-06-14 21:46:48 +00:00
Pawel Jakub Dawidek
96610dd9b6 Fix typos.
MFC after:	3 days
2010-06-14 21:44:58 +00:00
Pawel Jakub Dawidek
328e0f4b04 Initialize gctl_seq for synchronization requests.
Reported by:	hiroshi@soupacific.com
Analysed by:	Mikolaj Golub <to.my.trociny@gmail.com>
Tested by:	hiroshi@soupacific.com, Mikolaj Golub <to.my.trociny@gmail.com>
MFC after:	3 days
2010-06-14 21:44:20 +00:00
Pawel Jakub Dawidek
7a716e072e Plug memory leak.
Found by:	Coverity Prevent
CID:		7057
MFC after:	3 days
2010-06-14 21:41:22 +00:00
Pawel Jakub Dawidek
b0dfbe5b27 Plug memory leak.
Found by:	Coverity Prevent
CID:		7056
MFC after:	3 days
2010-06-14 21:37:25 +00:00
Pawel Jakub Dawidek
9f31eddba0 Plug memory leak.
Found by:	Coverity Prevent
CID:		7051
MFC after:	3 days
2010-06-14 21:33:18 +00:00
Pawel Jakub Dawidek
6744284aec Plug memory leaks.
Found by:	Coverity Prevent
CID:		7052, 7053, 7054, 7055
MFC after:	3 days
2010-06-14 21:25:20 +00:00
Pawel Jakub Dawidek
9fab3c1b94 Remove macros that are not really needed. The idea was to have them in case
we grow more descriptors, but I'll reconsider readding them once we get there.

Passing (a = b) expression to FD_ISSET() is bad idea, as FD_ISSET() evaluates
its argument twice.

Found by:	Coverity Prevent
CID:		5243
MFC after:	3 days
2010-06-14 21:18:58 +00:00
Pawel Jakub Dawidek
a58b195e35 Eliminate dead code.
Found by:	Coverity Prevent
CID:		5158
MFC after:	3 days
2010-06-14 21:01:13 +00:00
Ulrich Spörlein
3ba5db25bb Remove dead variable assignments
Found by:	clang static analyzer
Verified by:	md5(1)
2010-06-11 17:03:04 +00:00
Ulrich Spörlein
ee4912eb07 Initialize variables before usage.
Found by:	clang static analyzer
Found by:	Coverity Prevent[tm] (CID 7736, 7760)
2010-06-11 17:02:57 +00:00
Andrey V. Elsukov
24609c49ca bgeom(3) does strdup of param name.
Don't leak memory when deleting param from gctl_req.

Reviewed by:	marcel
Approved by:	mav (mentor)
MFC after:	2 weeks
2010-06-07 07:41:41 +00:00
Marius Strobl
a7d366e958 - Mention that VTOC8 labels are found in Fujitsu SPARC64 machines as well.
- Add information regarding VTOC8 bootrstrap code and how it's handled with
  r208777 in place.
- Document the mapping of partition types to VTOC8 tags.
- Add examples for VTOC8 to the respective section.
- Eliminated hard sentence breaks.

Reviewed by:	marcel (slightly buggy version)
MFC after:	3 days
2010-06-03 13:04:56 +00:00
Marius Strobl
094fcb157d - In gpart_bootfile_read() fix an off-by-one error preventing the bootstrap
file to be of maximum size.
- Add special handling required for SMI/VTOC8 disklabel partcode, i.e. avoid
  overwriting the label when writing the bootstrap code to the partition
  starting at 0 and install it to all partitions when the -i option is omitted
  just like geom_sunlabel(4) and sunlabel(8) do by default.
- Add missing prototypes.
- Add const where applicable.

Reviewed by:	marcel
MFC after:	3 days
2010-06-03 13:01:55 +00:00
Jilles Tjoelker
7f482407a3 Clarify devfs manpages slightly.
mount(8): add xref to devfs(5)
devfs(5): change example to something more likely to be useful (it is not
necessary to mount a devfs on /dev manually, but for chroots/jails it is
often needed), mention since when devfs is preferred to device nodes on ufs

PR:		146600
MFC after:	2 weeks
2010-05-29 20:24:01 +00:00
Ulrich Spörlein
30fc54ea79 mdoc: .Ud has attitude, it takes no argument! 2010-05-27 13:56:40 +00:00
Kirk McKusick
97fea87b49 Add support to background fsck to delete zero-length directories. 2010-05-20 06:05:40 +00:00
Ulrich Spörlein
62486687ed mdoc: consistently spell our email addresses <foo@FreeBSD.org>
Reviewed by:	ru
2010-05-19 08:57:53 +00:00