scripts in rc.d to stop rc(8) from booting into multi-user mode when
a critical or severe error condition is encountered.
o Modify scripts in etc/rc.d that already implemented this functionality
independently.
o Document it.
[1] - This subroutine was implemented in FreeBSD in rc.d/fsck. I moved it
to rc.subr(8). Our version differs slightly in that it takes an
optional argument to stop the boot even if "autoboot" is not set.
Obtained from: NetBSD
MFC after: 2 weeks
* Break out the boot0 loader selection into a variable - NANO_BOOTLOADER -
so people like me with VGA consoles can override the default (which is
to use boot0sio)
* Put the boot0 configuration options in NANO_BOOT0CFG in case you want
to override the defaults.
* Modify nanobsd.8 to reflect the changes and hint the console default is
serial.
MFC after: 2 weeks
The name trunk is misused as the networking term trunk means carrying multiple
VLANs over a single connection. The IEEE standard for link aggregation (802.3
section 3) does not talk about 'trunk' at all while it is used throughout IEEE
802.1Q in describing vlans.
The lagg(4) driver provides link aggregation, failover and fault tolerance.
Discussed on: current@
which can be used to turn off multicast pfsync support, and enable
the transmission of directed PFSYNC (IP protocol: 240) packets to
a specific "sync peer" host.
PR: conf/111225
Submitted by: Bas van Beek <bas@tobin.nl>
Approved by: mtm, mlaier
MFC after: 2 weeks
tolerance. This driver allows aggregation of multiple network interfaces as
one virtual interface using a number of different protocols/algorithms.
failover - Sends traffic through the secondary port if the master becomes
inactive.
fec - Supports Cisco Fast EtherChannel.
lacp - Supports the IEEE 802.3ad Link Aggregation Control Protocol
(LACP) and the Marker Protocol.
loadbalance - Static loadbalancing using an outgoing hash.
roundrobin - Distributes outgoing traffic using a round-robin scheduler
through all active ports.
This code was obtained from OpenBSD and this also includes 802.3ad LACP support
from agr(4) in NetBSD.
the args for hash32_stre and hash32_strne but there are no consumers in the
base system and openbgpd does not use it which the initial import was for.
Silence on: hackers
unmount jail-friendly file systems from within a jail.
Precisely it grants PRIV_VFS_MOUNT, PRIV_VFS_UNMOUNT and
PRIV_VFS_MOUNT_NONUSER privileges for a jailed super-user.
It is turned off by default.
A jail-friendly file system is a file system which driver registers
itself with VFCF_JAIL flag via VFS_SET(9) API.
The lsvfs(1) command can be used to see which file systems are
jail-friendly ones.
There currently no jail-friendly file systems, ZFS will be the first one.
In the future we may consider marking file systems like nullfs as
jail-friendly.
Reviewed by: rwatson
obtaining and releasing shared and exclusive locks. The algorithms for
manipulating the lock cookie are very similar to that rwlocks. This patch
also adds support for exclusive locks using the same algorithm as mutexes.
A new sx_init_flags() function has been added so that optional flags can be
specified to alter a given locks behavior. The flags include SX_DUPOK,
SX_NOWITNESS, SX_NOPROFILE, and SX_QUITE which are all identical in nature
to the similar flags for mutexes.
Adaptive spinning on select locks may be enabled by enabling the
ADAPTIVE_SX kernel option. Only locks initialized with the SX_ADAPTIVESPIN
flag via sx_init_flags() will adaptively spin.
The common cases for sx_slock(), sx_sunlock(), sx_xlock(), and sx_xunlock()
are now performed inline in non-debug kernels. As a result, <sys/sx.h> now
requires <sys/lock.h> to be included prior to <sys/sx.h>.
The new kernel option SX_NOINLINE can be used to disable the aforementioned
inlining in non-debug kernels.
The size of struct sx has changed, so the kernel ABI is probably greatly
disturbed.
MFC after: 1 month
Submitted by: attilio
Tested by: kris, pjd
the mutex locked. Also tweak the wording to make it more consistant
between pthread_cond_wait and pthread_cond_tiedwait.
Confirmed with the opengroup's web site that this is a valid return
value. Wording used specifically not that of opengroup's online man
pages.
MFC After: 1 week
imitating an Ethernet device, so vlan(4) and if_bridge(4) can be
attached to it for testing and benchmarking purposes. Its source
can be an introduction to the anatomy of a network interface driver
due to its simplicity as well as to a bunch of comments in it.
argument from a mutex to a lock_object. Add cv_*wait*() wrapper macros
that accept either a mutex, rwlock, or sx lock as the second argument and
convert it to a lock_object and then call _cv_*wait*(). Basically, the
visible difference is that you can now use rwlocks and sx locks with
condition variables using the same API as with mutexes.
This is supposed to be a brief overview of the locking primatives.
It is not yet complete and contains many place-holders for information
I do not know.
The locking is getting so diverse that I've lost track of it all.
We need this page to keep outselves in sync with what the primitives do.
note.. not part of the build yet.
the background fsck indefinitely. This allows the administrator to run
it at a convenient time. To support running it from cron, the
forcestart argument now causes the fsck to start with no delay and all
output to be suppressed.
event. Locking primitives that support this (mtx, rw, and sx) now each
include their own foo_sleep() routine.
- Rename msleep() to _sleep() and change it's 'struct mtx' object to a
'struct lock_object' pointer. _sleep() uses the recently added
lc_unlock() and lc_lock() function pointers for the lock class of the
specified lock to release the lock while the thread is suspended.
- Add wrappers around _sleep() for mutexes (mtx_sleep()), rw locks
(rw_sleep()), and sx locks (sx_sleep()). msleep() still exists and
is now identical to mtx_sleep(), but it is deprecated.
- Rename SLEEPQ_MSLEEP to SLEEPQ_SLEEP.
- Rewrite much of sleep.9 to not be msleep(9) centric.
- Flesh out the 'RETURN VALUES' section in sleep.9 and add an 'ERRORS'
section.
- Add __nonnull(1) to _sleep() and msleep_spin() so that the compiler will
warn if you try to pass a NULL wait channel. The functions already have
a KASSERT to that effect.
interrupt sleeps. Rather, unmasked signals interrupt restarts and can
either interrupt the system call by having it return EINTR in userland or
force the system call to be restarted.
- Don't claim that the mutex is atomically reacquired when a cv_wait
routine returns. There's nothing atomic or magical about the lock
reacquire. The only magic is that we atomically drop the lock by
placing the thread on the sleep queue before dropping the lock.
- Markup sx_unlock() as a function rather than saying it is a macro.
The macro part is an implementation detail, and all the other sx_*lock()
functions are actually macros, too.
- Use the same style as rwlock(9) and mutex(9) to markup sx_assert() and
SX_SYSINIT() with respect to headers and kernel options.
- Add a missing MLINK.
for /tmp and /var. This makes the memory discs swap-backed instead
of malloc-backed. A swap-backed memory disc should not be worse
than a malloc-backed one in any scenario because it will start
touching swap only when needed. OTOH, a malloc-backed disc can
starve limited kernel resources and evenually crash the system.
Reflect the change in the rc.conf(5) manpage. Also stop telling
lies there about softupdates: it does not waste disc space, it
just can delay its freeing.
Suggested by: many
PR: kern/87255
MFC after: 1 week
<sys/extattr.h> to <ufs/ufs/extattr.h>. Move description
of extended attributes in UFS from man9/extattr.9 to
man5/fs.5.
Note that restore will not compile until <sys/extattr.h>
and <ufs/ufs/extattr.h> have been updated.
Suggested by: Robert Watson
While here, remove Xrefs to all other wlan drivers except the Intel ones,
these often get confused. Also remove pointers to the old ipw and iwi webpages,
they don't include any useful information that's not in the manpages yet.
Reviewed by: flz, ru
o uniform the driver_intr_t parameter name to 'ithread'
o delete any reference to INTR_FAST
o document a bit the difference between the filter and ithread
argument
Reviewed by: mdoc-police (ru)
- the issues with wakeup_one are due to address space clashes between
unrelated groups of threads.
- sleep() was removed in FreeBSD 2.2.
- date the page today, not 4 days ago.
- replace grammatically correct "woken" with "woken up" for
consistency with the function name.
- BIOCGDIRECTION and BIOCSDIRECTION get or set the setting determining
whether incoming, outgoing, or all packets on the interface should be
returned by BPF. Set to BPF_D_IN to see only incoming packets on the
interface. Set to BPF_D_INOUT to see packets originating locally and
remotely on the interface. Set to BPF_D_OUT to see only outgoing
packets on the interface. This setting is initialized to BPF_D_INOUT
by default. BIOCGSEESENT and BIOCSSEESENT are obsoleted by these but
kept for backward compatibility.
- BIOCFEEDBACK sets packet feedback mode. This allows injected packets
to be fed back as input to the interface when output via the interface is
successful. When BPF_D_INOUT direction is set, injected outgoing packet
is not returned by BPF to avoid duplication. This flag is initialized to
zero by default.
Note that libpcap has been modified to support BPF_D_OUT direction for
pcap_setdirection(3) and PCAP_D_OUT direction is functional now.
Reviewed by: rwatson
attribute. Also define some macros to manipulate one of these
structures. Explain their use in the extattr.9 manual page.
The next step will be to make a sweep through the kernel replacing
the old pointer manipulation code. To get an idea of how they would
be used, the ffs_findextattr() function in ufs/ffs/ffs_vnops.c is
currently written as follows:
/*
* Vnode operating to retrieve a named extended attribute.
*
* Locate a particular EA (nspace:name) in the area (ptr:length), and return
* the length of the EA, and possibly the pointer to the entry and to the data.
*/
static int
ffs_findextattr(u_char *ptr, u_int length, int nspace, const char *name,
u_char **eap, u_char **eac)
{
u_char *p, *pe, *pn, *p0;
int eapad1, eapad2, ealength, ealen, nlen;
uint32_t ul;
pe = ptr + length;
nlen = strlen(name);
for (p = ptr; p < pe; p = pn) {
p0 = p;
bcopy(p, &ul, sizeof(ul));
pn = p + ul;
/* make sure this entry is complete */
if (pn > pe)
break;
p += sizeof(uint32_t);
if (*p != nspace)
continue;
p++;
eapad2 = *p++;
if (*p != nlen)
continue;
p++;
if (bcmp(p, name, nlen))
continue;
ealength = sizeof(uint32_t) + 3 + nlen;
eapad1 = 8 - (ealength % 8);
if (eapad1 == 8)
eapad1 = 0;
ealength += eapad1;
ealen = ul - ealength - eapad2;
p += nlen + eapad1;
if (eap != NULL)
*eap = p0;
if (eac != NULL)
*eac = p;
return (ealen);
}
return(-1);
}
After applying the structure and macros, it would look like this:
/*
* Vnode operating to retrieve a named extended attribute.
*
* Locate a particular EA (nspace:name) in the area (ptr:length), and return
* the length of the EA, and possibly the pointer to the entry and to the data.
*/
static int
ffs_findextattr(u_char *ptr, u_int length, int nspace, const char *name,
u_char **eapp, u_char **eac)
{
struct extattr *eap, *eaend;
eaend = (struct extattr *)(ptr + length);
for (eap = (struct extattr *)ptr; eap < eaend; eap = EXTATTR_NEXT(eap)){
/* make sure this entry is complete */
if (EXTATTR_NEXT(eap) > eaend)
break;
if (eap->ea_namespace != nspace ||
eap->ea_namelength != length ||
bcmp(eap->ea_name, name, length))
continue;
if (eapp != NULL)
*eapp = eap;
if (eac != NULL)
*eac = EXTATTR_CONTENT(eap);
return (EXTATTR_CONTENT_SIZE(eap));
}
return(-1);
}
Not only is it considerably shorter, but it hopefully more readable :-)
want an equivalent of DELAY(9) that sleeps instead of spins. It accepts
a wmesg and a timeout and is not interrupted by signals. It uses a private
wait channel that should never be woken up by wakeup(9) or wakeup_one(9).
Glanced at by: phk
transition to mbuma (FreeBSD 5.3) and the fact that mbufs are now limited
almost entirely to packet storage, with straight UMA zones being used for
most other network data types.
Apart from minor cleanup of the text, it should document
in reasonable detail what the status of the code is.
RELENG_6 has some minor differences there in the way automatic
loading/unloading is handled, but hopefully this should be
fixed by MFC time.
The examples come from Max Laier and Sam Leffler.
MFC after: 1 week
Note: This also deprecates "NO" as a way to specify an empty list of
interfaces for gif_interfaces.
PR: conf/104884
Submitted by: nork
Harassed by: brd
Discussed with: brooks, dougb
The patch from the PR was a little outdated w/regards to the
Vodafone vendor string.
PR: kern/106033
Submitted by: Volker Werth <volker_AT_vwsoft.com>
MFC in: 3 days
Make devfs cloning a sysctl/tunable which defaults to on.
If devfs cloning is enabled, only the super-user may create
tun(4)/tap(4)/vmnet(4) instances. Devfs cloning is still enabled by
default; it may be disabled from the loader or via sysctl with
"net.link.tap.devfs_cloning" and "net.link.tun.devfs_cloning".
Disabling its use affects potentially all tun(4)/tap(4) consumers
including OpenSSH, OpenVPN and VMware.
PR: 105228 (potentially also 90413, 105570)
Submitted by: Landon Fuller
Tested by: Andrej Tobola
Approved by: core (rwatson)
MFC after: 4 weeks
world order:
mount -t linsysfs linsys /compat/linux/sys
instead of mount_linsysfs. Now that 6.X requires mount_linsysfs to
work. This is why there is a mount_linsysfs in 6.X and not in -current.
Prompted by: ru
Reviewed by: ru, rodrigc
Point out that FreeBSD libc has compat stubs for GNU glibc NSS
modules which access NSDB_PASSWD/NSDB_GROUP, but not NSDB_HOSTS;
based on painful experience porting nss_mdns.
Reviewed by: ru
and add a list of known-working PCI devices.
- For consistency throughout this man page also talk about C-Bus and
ISA adapters rather than cards.
- Add missing .Tn.
- Mention ifconfig(8) along with listing selectable media types.
- Add/un-comment hardware notes for the newly supported 'lebuffer'
variants (the transition from P/N 501-1860 to 501-1869 isn't a typo).
Approved by: gnn
Add a new function hashinit_flags() which allows NOT-waiting
for memory (or waiting). The old hashinit() function now
calls hashinit_flags(..., HASH_WAITOK);
Document my recent changes to rc.subr(8):
- there is $required_modules now;
- $required_* are checked before invoking a custom start method, too.
MFC after: 1 month
behave as expected.
Also:
- Return an error if WD_PASSIVE is passed in to the ioctl as only
WD_ACTIVE is implemented at the moment. See sys/watchdog.h for an
explanation of the difference between WD_ACTIVE and WD_PASSIVE.
- Remove the I_HAVE_TOTALLY_LOST_MY_SENSE_OF_HUMOR define. If you've
lost your sense of humor, than don't add a define.
Specific changes:
i80321_wdog.c
Don't roll your own passive watchdog tickle as this would defeat the
purpose of an active (userland) watchdog tickle.
ichwd.c / ipmi.c:
WD_ACTIVE means active patting of the watchdog by a userland process,
not whether the watchdog is active. See sys/watchdog.h.
kern_clock.c:
(software watchdog) Remove a check for WD_ACTIVE as this does not make
sense here. This reverts r1.181.
- Move mentionings of required drivers to the SYNOPSIS where they belong
- Remove cruft (XiG, sheesh) from the EXAMPLES section and re-arrange things to make
somewhat more sense
- Fix an Xref to manpage from ports to mention the corresponsing port
- Remove commented out HISTORY section header
MFC after: 3 days
revision 1.199
date: 2004/09/24 08:30:57; author: phk; state: Exp; lines: +0 -1
Remove the cdevsw() function which is now unused.
(the log is wrong, it was really devsw that was removed).
# we really need to actually document the functions in sys/conf.h as well
# as things like d_open...
