Commit Graph

2217 Commits

Author SHA1 Message Date
Andrew Thompson
07532e4997 Check the correct variable for IO_NDELAY.
Submitted by:	Hans Petter Selasky
2009-05-13 18:05:40 +00:00
Andrew Thompson
c773c25419 Add debug lines for fullspeed and highspeed xfer completion.
Submitted by:	Hans Petter Selasky
2009-05-13 18:04:51 +00:00
Andrew Thompson
3a67e91430 Sync to P4
Add umass quirks for Alcor AU6390, Cypress PATA 6830XX and MPMan MPF400.

Submitted by:	Hans Petter Selasky
2009-05-13 18:03:23 +00:00
Andrew Thompson
f1f8840814 The transfer must return USB_ERR_CANCELLED when the device is gone due to the
way usb drivers work.

Submitted by:	Hans Petter Selasky
2009-05-13 17:58:37 +00:00
Weongyo Jeong
922f7c5c21 Add WUSB54AG and XM142 entries for upgt(4) 2009-05-12 02:05:42 +00:00
Weongyo Jeong
879f0eff53 ports upgt(4) driver for USB2. 2009-05-11 02:39:49 +00:00
Andrew Thompson
822e5d76f8 Use a 32 bit type for the interface mask as this equals the max interface
count.
2009-05-07 17:05:03 +00:00
Andrew Thompson
426909d969 Add the Sierra AC885U and increase the max ports to 8. 2009-05-07 02:17:09 +00:00
Andrew Thompson
e92a451510 - Fix the u3g port detection where it would not calculate the correct number of
ports when multiple interfaces are present.
- Claim all interfaces regardless of how many are attached
2009-05-07 02:15:58 +00:00
Andrew Thompson
a173706bbd Use vendor and product macro expansion to make the device table smaller and
more readable.
2009-05-07 02:13:56 +00:00
Andrew Thompson
b9c81a5dce Make sure the frame list base address is re-programmed after stopping the USB
schedule, in case the hardware clears the frame list base address.

Submitted by:	Hans Petter Selasky
Reported by:	Chao Shin
2009-05-05 15:41:30 +00:00
Andrew Thompson
6b1bca02b9 Remove USB shutdown methods from device drivers as its the host controllers
responsibility to detach the bus.

PR:		usb/133896
Submitted by:	Hans Petter Selasky
2009-05-05 15:39:29 +00:00
Andrew Thompson
ec8f31275d Revert part of r191494 which used the udev state to mark suspending, this needs
to be set via two variables (peer_suspended and self_suspended) and can not be
merged into one.

Submitted by:	Hans Petter Selasky
Pointy hat:	me
2009-05-05 15:36:23 +00:00
Andrew Thompson
5efea30f03 Create a taskqueue for each wireless interface which provides a serialised
sleepable context for net80211 driver callbacks. This removes the need for USB
and firmware based drivers to roll their own code to defer the chip programming
for state changes, scan requests, channel changes and mcast/promisc updates.
When a driver callback completes the hardware state is now guaranteed to have
been updated and is in sync with net80211 layer.

This nukes around 1300 lines of code from the wireless device drivers making
them more readable and less race prone.

The net80211 layer has been updated as follows
 - all state/channel changes are serialised on the taskqueue.
 - ieee80211_new_state() always queues and can now be called from any context
 - scanning runs from a single taskq function and executes to completion. driver
   callbacks are synchronous so the channel, phy mode and rx filters are
   guaranteed to be set in hardware before probe request frames are
   transmitted.

Help and contributions from Sam Leffler.

Reviewed by:	sam
2009-05-02 15:14:18 +00:00
Andrew Thompson
6fca021096 We need to ref the bss node when sending the beacon since it goes through the
normal tx path and will be decremented on the mbuf free.
2009-04-30 22:30:01 +00:00
Andrew Thompson
4d4fa6edd4 Make the state string descriptions public. 2009-04-25 21:25:52 +00:00
Andrew Thompson
bd21677868 Track the usb device state as its powered on, addressed and configured. This helps
to avoid touching the device when it is not going to respond and would otherwise
timeout.

Implement the suspend tracking as a udev state too.
2009-04-25 21:10:06 +00:00
Andrew Thompson
459d369ee2 MFp4 //depot/projects/usb@160930
Change the roothub exec functions to take the usb request and data pointers
directly rather than placing them on the parent bus struct.

Submitted by:	Hans Petter Selasky
2009-04-22 17:08:16 +00:00
Andrew Thompson
c1911c1b7c MFp4 //depot/projects/usb@160708
Need to check Read/Write allowed before writing any data for non-control
transfers.

Submitted by:	Hans Petter Selasky
2009-04-22 17:08:13 +00:00
Andrew Thompson
672c9965ef MFp4 //depot/projects/usb@160706
Resolve possible device side mode deadlock by creating another thread.

Submitted by:	Hans Petter Selasky
2009-04-22 17:08:10 +00:00
Andrew Thompson
39063699e6 MFp4 //depot/projects/usb@160678
Remove unused field.

Submitted by:	Hans Petter Selasky
2009-04-22 17:08:07 +00:00
Andrew Thompson
9469c92974 MFp4 //depot/projects/usb@160655
Fix possible issue with clear-stall and set-config happening at the same time.

Submitted by:	Hans Petter Selasky
2009-04-22 17:08:04 +00:00
Andrew Thompson
88b4e0abcf MFp4 //depot/projects/usb@160614
Fix errornous printout.

Submitted by:	Hans Petter Selasky
2009-04-22 17:07:59 +00:00
Andrew Thompson
8ac0864630 MFp4 //depot/projects/usb@160485
Fix a bug in the USB power daemon code where connection of multiple HUBs in
series would result in incorrect device suspend.

Reported by:	Nicolas xxx@wanadoo.fr
Submitted by:	Hans Petter Selasky
2009-04-22 17:07:56 +00:00
Andrew Thompson
495f25cedc MFp4 //depot/projects/usb@160413
Use direct reference to parent high-speed HUB instead of indirect, due to
pointer clearing race at detach of parent USB HUB.

Reported by:	kientzle
Submitted by:	Hans Petter Selasky
PR:		usb/133545
2009-04-22 17:07:53 +00:00
Takanori Watanabe
450a309dfe Add another FTDI serial converter. 2009-04-21 05:06:31 +00:00
Andrew Thompson
853a10a581 Revert r190676,190677
The geom and CAM changes for root_hold are the wrong solution for USB design
quirks.

Requested by:	scottl
2009-04-10 04:08:34 +00:00
Andrew Thompson
6830af1a05 Remove usb_sw_transfer.[ch] which are now empty after r190735. 2009-04-06 00:32:54 +00:00
Andrew Thompson
fde875265f Provide a better commit log for r190735, forced by making a whitespace change.
Refactor how we interface with the root HUB. This is achieved by making a
direct call from usb2_do_request to the host controller for root hub requests,
this call will perform the controller specific register read/writes and return
the error code.

This cuts out a lot of code in the host controller files and saves one thread
per USB bus.

Submitted by:	Hans Petter Selasky
2009-04-06 00:22:49 +00:00
Andrew Thompson
5cbbd666e1 Catch up with usb2_config struct layout changes. 2009-04-05 18:26:19 +00:00
Andrew Thompson
9f2b42e596 MFp4 //depot/projects/usb@160056
Remove code for unused and unlikely quirk, "uq_power_claim"

Submitted by:	Hans Petter Selasky
2009-04-05 18:22:13 +00:00
Andrew Thompson
afa07055be MFp4 //depot/projects/usb@160052
Wait until line configuration is complete before starting data transfers.

Submitted by:	Hans Petter Selasky
2009-04-05 18:22:03 +00:00
Andrew Thompson
de967835e0 MFp4 //depot/projects/usb@159995
- add support for more complicated HID descriptors which can have multiple
  definitions of the same field.
- remove old modulo patch in ums, which I think is due to bad HID parsing,
  which should be fixed now.

Reported by:	netchild
Submitted by:	Hans Petter Selasky
2009-04-05 18:21:51 +00:00
Andrew Thompson
03797f3300 MFp4 //depot/projects/usb@159948
Add more debugging output on enumeration failures.

Submitted by:	Hans Petter Selasky
2009-04-05 18:21:31 +00:00
Andrew Thompson
4565300d56 MFp4 //depot/projects/usb@159946
Some cancelable flags are always true.  Substitute these away. These cancelable
flags were mostly useful with the root HUB which is now handled differently.

Submitted by:	Hans Petter Selasky
2009-04-05 18:21:21 +00:00
Andrew Thompson
3b01d5130c MFp4 //depot/projects/usb@159926
Minor code factorisation in atmegadci.c

Submitted by:	Hans Petter Selasky
2009-04-05 18:21:08 +00:00
Andrew Thompson
c48fb077ea MFp4 //depot/projects/usb@159925
Cast variables properly for non-32-bit platforms.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:58 +00:00
Andrew Thompson
3930731567 MFp4 //depot/projects/usb@159922
Refactor how we interface with the root HUB. This cuts around 1200 lines of
code totally and saves one thread per USB bus.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:49 +00:00
Andrew Thompson
4eae601ebd MFp4 //depot/projects/usb@159909
- make usb2_power_mask_t 16-bit
- remove "usb2_config_sub" structure from "usb2_config". To compensate for this
  "usb2_config" has a new field called "usb_mode" which select for which mode
  the current xfer entry is active. Options are: a) Device mode only b) Host
  mode only (default-by-zero) c) Both modes.  This change was scripted using
  the following sed script: "s/\.mh\././g".
- the standard packet size table in "usb_transfer.c" is now a function, hence
  the code for the function uses less memory than the table itself.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:38 +00:00
Andrew Thompson
3b52b6f172 MFp4 //depot/projects/usb@159908
Reduce the amount of memory used by better sizing buffer arrays.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:24 +00:00
Andrew Thompson
51ec16035f MFp4 //depot/projects/usb@159897
Add new endpoint direction values for use with usb2_config

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:13 +00:00
Andrew Thompson
63521bbc5a MFp4 //depot/projects/usb@159871
- bugfixes after the memory usage reduction patch
- Use "udev->pipes_max" instead of USB_EP_MAX
- Use correct "bmRequestType" for getting the config descriptor.

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:03 +00:00
Andrew Thompson
bdd4120608 MFp4 //depot/projects/usb@159866
- memory usage reduction by only allocating the required USB pipes and USB
  interfaces.
- cleanup some USB parsing functions to be more flexible.

Submitted by:	Hans Petter Selasky
2009-04-05 18:19:52 +00:00
Andrew Thompson
0ed53d4515 MFp4 //depot/projects/usb@159864
Fix possible deadlock with UGEN at detach.

Submitted by:	Hans Petter Selasky
2009-04-05 18:19:42 +00:00
Andrew Thompson
dab47558c8 MFp4 //depot/projects/usb@159863
Speed up the endpoint descriptor search

Submitted by:	Hans Petter Selasky
2009-04-05 18:19:30 +00:00
Andrew Thompson
7efaaa9a91 MFp4 //depot/projects/usb@159811
First patch in a series of memory save patches.

Submitted by:	Hans Petter Selasky
2009-04-05 18:19:19 +00:00
Andrew Thompson
ab32485fd9 MFp4 //depot/projects/usb@159806
Properly name usb2_uref_location() so that it is not confused with
usb2_unref_location() .

Submitted by:	Hans Petter Selasky
2009-04-05 18:19:10 +00:00
Andrew Thompson
9e6e0ec449 MFp4 //depot/projects/usb@159797
Remove unused field in "struct usb2_pipe".

Submitted by:	Hans Petter Selasky
2009-04-05 18:19:00 +00:00
Andrew Thompson
684e3f2245 MFp4 //depot/projects/usb@159700
Get rid of the last CALLOUT_RETURNUNLOCKED reference.

Submitted by:	Hans Petter Selasky
2009-04-05 18:18:47 +00:00
Andrew Thompson
72b532e501 MFp4 //depot/projects/usb@159677
Remove redundant locking.

Submitted by:	Hans Petter Selasky
2009-04-05 18:18:36 +00:00