multicast group memberships. This is not actually operative
at the moment (a lot of other code still needs to be changed), but
this seemed like a useful reference point to check in so that
others (i.e. Bill Fenner) have fair warning of where we are going.
- C++ should be supported for application functions (use __BEGIN_DECLS,
etc.).
- prototypes should be sorted.
- comments on #endif's should spell identifiers the same as the code.
- comments on #endif's should have the same sense as the code (use `!'
to match ifndef, etc.).
> wollman 96/12/10 09:19:15
>
> Modified: lib/libc/net ether_addr.c ethers.3
> Log:
> Get struct ether_addr directly from <net/ethernet.h> rather than pulling
> in lots of unrelated junk from <net/if.h> and <net/if_ether.h>. These
> functions still aren't prototyped anywhere (but should be in
> <net/ethernet.h>---got that, Bill?).
(Note that this file has no copyright header; one should probably
be added.)
Use the interface MTU instead of the constant when deciding what
packets to accept.
Allow using the SIOCSIFMTU ioctl (e.g. "ifconfig tun0 mtu XXX") to
set the MTU.
to TAILQs. Fix places which referenced these for no good reason
that I can see (the references remain, but were fixed to compile
again; they are still questionable).
type to be int so that errors can be returned.
2) Use the new SIOCSIFMTU ether_ioctl support in the few drivers that are
using ether_ioctl().
3) In if_fxp.c: treat if_bpf as a token, not as a pointer. Don't bother
testing for FXP_NTXSEG being reached in fxp_start()...just check for
non-NULL 'm'. Change fxp_ioctl() to use ether_ioctl().
1/ increase the tun MTU from 1500 to 1600 to allow it to be used with
packets formatted according to RFC1490 and RFC1717
2/ allow the tsleep() when reading, to be interruptable by signals
so that one can now do:
od -xc </dev/tun0
to dump packets for debugging without getting hung.
Passed on by: Archie@whistle.com (archie Cobbs)
Nice but not neccessary in 2.2
<net/if_arp.h> and fixed the things that depended on it. The nested
include just allowed unportable programs to compile and made my
simple #include checking program report that networking code doesn't
need to include <sys/socket.h>.
Sorry if this makes it harder to merge in lite2 stuff but hey..
At least I can figure out what is going on whenever I end up going through those
files again..
do we have a policy regarding commenting existing code?
is non-null before trying to delete it in rt_setgate(), which then
allows removal of the special-case code from the RTM_ADD case.
This should fix the panics that joerg and Phil Karn have been seeing.
the end of that sstructure to make evolution easier.
Add definitions for the 802.3/Ethernet MIB. To implement this, simply
add a `struct ifmib_iso_8802_3' somewhere in your interface's softc,
point if_linkmib to it, set if_linkmiblen, and fill in the statistics
with appropriate values. (I didn't want to create Yet Another Ethernet-
related header file, otherwise this would have been separated out.)
like it does elsewhere. This is probably only happens when incorrect
args are given to route(8), or when running with non-IPv4 stacks but
incorrect args to the route command is no excuse for panicing!
Submitted by: Michael Clay <mclay@weareb.org>, PR#1532
allow a tunnel interface to be openned even if it has no remote address yet.
this may be needed if you have used
route add default -interface tun0
where the remote end might not even HAVE a number (e.g. netcom links)
This is a patch to sys/net/if.c. What it does is patch the algorithm
for finding an IP address on an interface which most closely matches
a given IP address. The problem with it is when no address matches,
and you have to just pick one at random. Then the code ends up picking
the last IP address in the list. This patch changes things so it
picks up the first address instead.
Usually the first address is more useful as the later ones are aliases.
interfaces. This creates two new tables in the net.link.generic branch
of the MIB; one contains (essentially) `ifdata' structures, and the other
contains a blob provided by the interface (and presumably used to
implement link-layer-specific MIB variables). A number of things
have been moved around in the `ifnet' and `ifdata' structures, so
NEW VERSIONS OF ifconfig(8) AND routed(8) ARE REQUIRED. (A simple
recompile is all that's necessary.)
I have a sample program which uses this interface for those interested
in making use of it.
when attepmting to add certain types of routes. This problem
only manifested itself in the presence of unconfigured point-to-point
interfaces.
Noticed by: Chuck Cranor <chuck@maria.wustl.edu>
The old system had the misfeature that the only policy it could implement
was tail-drop; the new IF_ENQ_DROP macro/function makes it possible
to implement more sophisticated queueing policies on a system-wide
basis. No code actually uses this yet (although on my machine
I have converted the ethernet and (polled) loopback to use it).
pr_usrreq mechanism which was poorly designed and error-prone. This
commit renames pr_usrreq to pr_ousrreq so that old code which depended on it
would break in an obvious manner. This commit also implements the new
interface for TCP, although the old function is left as an example
(#ifdef'ed out). This commit ALSO fixes a longstanding bug in the
TCP timer processing (introduced by davidg on 1995/04/12) which caused
timer processing on a TCB to always stop after a single timer had
expired (because it misinterpreted the return value from tcp_usrreq()
to indicate that the TCB had been deleted). Finally, some code
related to polling has been deleted from if.c because it is not
relevant t -current and doesn't look at all like my current code.
purpose, other than to get in the way of the ARP table and cause
"can't allocate llinfo" errors.
This change may cause gated or routed to start complaining when adding
such routes. If so, these programs will need to be fixed to not try
to add these routes.
Reviewed by: wollman
gary went a little overboard on commenting out unused variables.
Variables needed for ISO, LLC and NETATALK
were only enabled for ISO & LLC.. so NETATALK bombed.
All new code is "#ifdef PC98"ed so this should make no difference to
PC/AT (and its clones) users.
Ok'd by: core
Submitted by: FreeBSD(98) development team
gcc only inlines memcpy()'s whose count is constant and didn't inline
these. I want memcpy() in the kernel go away so that it's obvious that
it doesn't need to be optimized. Now it is only used for one struct
copy in si.c.
name string. This function should be rewritten to deal with more than
10 units of a given type.
Pointed out by: jmf@free-gate.com (Jean-Marc Frailong)
(I fixed it slightly differently)
Kernel Appletalk protocol support
both CAP and netatalk can make use of this..
still needs some owrk but it seemd the right tiime to commit it
so other can experiment.
the destination represents. For IP:
- Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local
(belongs to this host) and broadcast addresses, respectively.
- For all routes, RTF_MULTICAST is set if the destination is multicast.
The RTF_BROADCAST flag is used by ip_output() to eliminate a call to
in_broadcast() in a common case; this gives about 1% in our packet-generation
experiments. All three flags might be used (although they aren't now)
to determine whether a packet can be forwarded; a given host route can
represent a forwardable address if:
(rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST))
== RTF_HOST
Obviously, one still has to do all the work if a host route is not present,
but this code allows one to cache the results of such a lookup if rtalloc1()
is called without masking RTF_PRCLONING.
common labels for LINT. There are still some common declarations for the
!KERNEL case in tcp_debug.h and spx_debug.h. trpt depends on the ones in
tcp_debug.h.
header for use in decompressing subsequant packets. If cslip gets garbage
(such as what happens when there is a port speed mismatch or modem line
noise), it will occasionally mistake the packet as a valid uncompressed
packet. When it tries to save off the header, it doesn't bother to check
for the validity of the header length and will happily clobber not only
the cslip data structure, but parts of other kernel memory that happens
to follow it...causing, ahem, undesired behavior.
when rt == rt->rt_gwroute . rt == rt->gwroute shouldn't happen
in the first place, but that's another problem.
(try "route add -host <hostonmynet> <hostonmynet>; ping <hostonmynet>;
route delete <hostonmynet>")
Story so fr:
1) PPP on-demand with static IP works.
2) PPP on-demand with dynamic IP says "Host is down" on any IP request
The problem is that tun driver check its READY state by *first* ifconfig address.
i.e.:
set ifaddr <addr> <addr2>
works (static IP) and
set ifaddr 0 <addr2>
not works (dynamic IP) because first address is equal 0.
Since tun is always POINTOPOINT interface, dst address is more meaningfull.
I change checking to second (dst) address in READY test.
PPP on-demand finally works.
- fill in and use ifp->if_softc
- use if_bpf rather than private cookie variables
- change bpf interface to take advantage of this
- call ether_ifattach() directly from Ethernet drivers
- delete kludge in if_attach() that did this indirectly
and rmx_recvpipe. This has no demonstrable effect on performance.
(ttcp reports about 44 Mbit/s for all the buffer sizes I tried between
16384 and 65536.)
of limited utility. In their place, add bunch of pointers
which will eventually be needed by the polled-interrupt scheme we're working
here. (It will probably be a while before the code is written and
committed here.) At the same time, a `void *if_softc' field
was added to the beginning of the structure to make certain driver
writers happier.
The practical upshot of all this is that you need to
recompile utilities such as netstat which manipulate struct ifnet.
others: start to populate the link-layer branch of the net mib, by
moving ARP to its proper place. (ARP is not a protocol family, it's an
interface layer between a medium-access layer and a protocol family.)
sysctl(8) needs to be taught about the structure of this branch, unless
Poul-Henning implements dynamic MIB exploration soon.
*' instead of caddr_t and it isn't optional (it never was). Most of the
netipx (and netns) pr_ctlinput functions abuse the second arg instead of
using the third arg but fixing this is beyond the scope of this round
of changes.
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)
If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)
pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
