FC-Tape provides additional link level error recovery, and is
highly recommended for tape devices. It will only be turned on for
a given target if the target supports it.
Without this setting, we default to whatever FC-Tape setting is in
NVRAM on the card.
This can be overridden by setting the following loader tunable, for
example for isp0:
hint.isp.0.nofctape=1
sys/conf/options:
Add a new kernel config option, ISP_FCTAPE_OFF, that
defaults the FC-Tape configuration to off.
sys/dev/isp/isp_pci.c:
If ISP_FCTAPE_OFF is defined, turn off FC-Tape. Otherwise,
turn it on if the card supports it.
share/man/man4/isp.4:
Add a description of FC-Tape to the isp(4) man page.
Add descriptions of the fctape and nofctape options, as well as the
ISP_FCTAPE_OFF kernel configuration option.
Add the ispfw module and kernel drivers to the suggested
configurations at the top of the man page so that users are less
likely to leave it out. The driver works well with the included
firmware, but may not work at all with whatever firmware the user
has flashed on their card.
MFC after: 3 days
Sponsored by: Spectra Logic
file and add a generic DT binding that takes advantage of the extres
framework for setting up clocks.
Reviewed by: gonzo
Differential Revision: https://reviews.freebsd.org/D8826
use r92c_init_rf() rather than r92c_init_rf_common() when sc_init_rf()
callback is invoked.
While here, constantly use RF chain instead of RF path in comment.
Reviewed by: avos
This adds support for:
- Serializing an bhnd_nvram_plist (as exported from bhnd_nvram_store, etc) to
an arbitrary NVRAM data format.
- Generating a serialized representation of the current NVRAM store's state
suitable for writing back to flash, or re-encoding for upload to a
FullMAC device.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8762
properties backed by an NVRAM store.
This will be used to support:
- Serializing the current NVRAM state for writing back to flash.
- Exporting subsidiary device paths for serialization and upload to fullmac
chipsets.
Additionally, this includes an improvement to BCM-RAW format detection
to avoid matching on BCM-TEXT NVRAM data.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8761
Implements bhnd_nvram_store support for parsing and operating over NVRAM
device paths, and device path aliases, as well as tracking per-path NVRAM
variable writes.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8760
NULL (which we'll use to denote deleted values in bhnd_nvram_store), and
opaque data (aka octet-strings).
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8758
This adds support for bhnd_nvram_val_convert_init() and
bhnd_nvram_val_convert_new(), which may be used to perform value
format-aware encoding of an NVRAM value to a new target format/type.
This will be used to simplify converting to/from serialized
format-specific NVRAM value representations to common external
representations.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8757
representing arbitrary Broadcom NVRAM key/value pairs.
This will be used to track pending changes in bhnd_nvram_store, and
provide support for exporting all or a device subpath for NVRAM (as
required by some fullmac wifi chipsets).
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D8756
boot panics in conjunction with the recently added EARLY_AP_STARTUP feature.
The panics happen due to using kernel facilities like callouts too early.
Tested by: jhb @
MFC after: 1 week
This 6 times gettimeofday performance, as measured by
tools/tools/syscall_timing
Reviewed by: kib
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8789
enabled. This results in a -Werror warning in mlx4ib:
sys/dev/mlx4/mlx4_ib/mlx4_ib_sysfs.c:90:22: error: format specifies type 'unsigned long long *' but the argument has type 'u64 *' (aka 'unsigned long *') [-Werror,-Wformat]
sscanf(buf, "%llx", &sysadmin_ag_val);
~~~~ ^~~~~~~~~~~~~~~~
Change sysadmin_ag_val to unsigned long long to avoid the warning.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D8831
As cs is stored in a uint32_t, use the last bit to store the
active high flag as it's unlikely that we will have that much CS.
Reviewed by: loos
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8614
Remove unused fields from uart_pl011_softc. Add an interrupt mask
field to the softc and use it to set the interrupt mask register.
There should be no functional change introduced here except in the
grab and ungrab functions. In these functions, we now disable and
enable all interrupts rather than just the receive interrupt.
Make st_data part of spigen_transfer optional by letting pass zero length
and NULL pointer. SPI controller drivers handle this case fine.
MFC after: 1 week
memory-mapped devices that are normally PCIe drives. Devices can then use
the existing pci_get_class, etc. accessors to query this data.
The ivar values are different enough from the existing ACPI and ISA values
to not conflict.
Reviewed by: jhb
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8721
- Disable features that are not supported or not used on FreeBSD.
- Increase the RSS table slice per interface.
- Increase the share of the TCAM reserved for filtering.
MFH: 2 weeks
Sponsored by: Chelsio Communications
This paves way to implement VDSO for the enlightened time counter.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8768
feature_barrier and feature_flush variables. Otherwise, adjacent
variables on the stack, such as sector_size, may be overwritten, with
disastrous results.
Note that I did not see a good reason to revert the addition of zero
checks introduced in r310013. Better safe than sorry.
PR: 215209
Tested by: royger
MFC after: 3 days
In order to make Prometheus do graphing/alerting on thermal sensors in a
generic fashion, we should attach the name of the thermal zone device as
a label. That way there is only a single metric for the temperature of a
thermal zone, with its name attached as a label.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
This commit corrects print of nomatch (newline was too early) and fix
unit number for new child in ar5315_spi (was 0, now is -1 to calculate it
according to actual system state)
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: ray, loos, mizhka
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8749
non-zero sector size. Such a device would be a virtual disk of zero
bytes; clearly not useful, and not something we should try to attach.
As a fortuitous side effect, checking that these values are non-zero
here results in them not *becoming* zero later on the function. This
odd behaviour began with r309124 (clang 3.9.0) but is challenging to
debug; making any changes to this function whatsoever seems to affect
the llvm optimizer behaviour enough to make the unexpected zeroing of
the sector_size variable cease.
PR: 215209
Security: The potential for variables to unexpectedly become zero
has worrying consequences for security in general, but
not so much in this particular context.
Some clocks on SoC have a diff between the value written in the register
and the real divider.
Add a table that where we can lookup the real value of the divider.
Reviewed by: mmel (earlier revision)
Differential Revision: https://reviews.freebsd.org/D8728
ARM GIC specification in device trees use 3 cells, so the current
limit of 2 causes the last cell to be dropped. This in turn can
cause the interrupt polarity and trigger settings to be incorrect.
Increase the limit to 4 which should handle all reasonable cases.
This fixes issues seen in QEMU when registering PCI interrupts.
- Do not ignore initialization errors; call ieee80211_stop()
when initialization failed.
- Use usb_pause_mtx() instead of DELAY() while waiting for firmware
loading; this fixes system freeze during firmware startup.
- Do not execute rsu_stop() when device is powered off; fixes
'unknown board type (rfconfig=0xff)' error when the device is
reattached.
Tested with Asus USB-N10.
