This is converting the path usr/share/tmac.*stage to something else, but
nothing ever installs or reads from such a path. They might look in
stage.*usr/share/tmac, but that's not what this is matching. Additionally
the .dirdeps match all of the tmac files back to gnu/usr.bin/groff/tmac
fine.
Sponsored by: EMC / Isilon Storage Division
When bmake was initially imported at r241298 shell commands were no longer
ran with 'set -e' as they were before. This was fixed in r254980 so they
again always use 'set -e'.
Sponsored by: EMC / Isilon Storage Division
This is a NOP as r254419 enabled this by default in bmake. Add it here though
to ensure it is known that we are using this as a default and in case a
bmake import removes the default we have.
This tells bmake to always pass job tokens into sub-commands. Otherwise
it would only do so if the target being built depended on the special
.MAKE target (which causes _all_ commands to be executed with -n as well)
or if the command matches '${MAKE}/${.MAKE}/$(MAKE)/$(.MAKE)/make' (before
expansion, so ${LIB32WMAKE} would not qualify). Using '+' on a command
(which runs the command with -n) would not pass the job token even though it
is a documented way to achieve the .MAKE effect on a command.
Sponsored by: EMC / Isilon Storage Division
This fixes atf-c.h not properly being installed to /usr/include/ (in
the stagedir) via its override of 'INCSDIR_atf-c.h= ${INCLUDEDIR}'.
This fixes building things that depend on atf.
Staging seems to ignore OWN/GRP/MODE settings and needs further exploration.
Sponsored by: EMC / Isilon Storage Division
bsd.obj.mk handles the needs fine. When an objdir exists it will
just rm -Rf the objdir. When it does not exist though it will
call 'clean' and 'cleandepend', which properly recurse in bsd.progs.mk.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Refer to the usb_quirk(4) manual page for more details on how to use
this new feature.
Submitted by: Maxime Soule <btik-fbsd@scoubidou.com>
PR: 203249
MFC after: 2 weeks
This fixes the following errors:
make: don't know how to make bsd.README. Stop
make: don't know how to make auto.obj.mk. Stop
This is easily seen in sys/dev/*.
The new behavior is now the expected output:
make: no target to make.
This would happen as MAKESYSPATH (.../share/mk) is auto added to the -I list.
Any directory where make is ran in the src tree that has no local Makefile
would then try executing the target in share/mk/Makefile, which by default
was to build the first entry in FILES. Of course, because bsd.README and
auto.obj.mk are not in the current directory the error is shown.
This check only works for bmake, but I will still MFC it with an extra
'!defined(.PARSEDIR) ||' guard for stable/10.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This avoids needing a large boot partition / file system in order to
accommodate multiple kernels, and provides consistency with userland
debug. This also simplifies the process of moving kernel debug files
to a separate package and installing them on demand.
In addition, change kernel debug file extension to .debug, to match
userland debug files.
When using the supported kernel installation method the
/usr/lib/debug/boot/kernel directory will be renamed (to kernel.old)
as is done with /boot/kernel.
Developers wishing to maintain the historical behavior of installing
debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5).
Reviewed by: bdrewery, brooks, imp, markj
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1006
This mostly fixes an interaction with bsd.test.mk with PROGS and SCRIPTS.
This was most notable with 'make clean' and 'make install', which r281055
and r272055 attempted to address but were inadequate.
It also addresses similar issues in bsd.progs.mk when not using bsd.test.mk.
This also fixes cases of NOT running commands in the parent when using
bsd.progs.mk:
- 'make clean' was not run for the main process for Makefiles which had both
FILES and SUBDIR but no PROGS or SCRIPTS. This usually was just a
leftover Kyuafile.auto. One such example is usr.bin/bmake/tests/sysmk/t1/2.
- 'make obj' was not running in the current directory with bsd.test.mk due
to early inclusion of bsd.subdir.mk. This was not really a problem due to
the SUBDIRS using 'mkdir -p' for their objdirs.
There were subtle bugs causing this wrong behavior:
1. bsd.progs.mk needs to set SCRIPTS to empty when recursing to avoid
the sub-makes from installing, cleaning or building the SCRIPTS;
only the parent make should be doing this. r281055 effectively did
the same but wasn't enough.
2. CLEANFILES may contain (especially from *.test.mk) files which only
the parent should clean, such as from FILES and SCRIPTS. To resolve
sub-makes also cleaning these, reset CLEANFILES and CLEANDIRS in the
children before including bsd.prog.mk. A tempting alternative would be
to only handle CLEANFILES in the parent but then the child bsd.prog.mk
CLEANFILES of per-PROGS wouldn't be setup.
3. bsd.subdir.mk was included too soon in bsd.test.mk. It needs to be
included after bsd.prog.mk as the SCRIPTS logic is short-circuitted if
'install:' is already defined (which bsd.subdir.mk does). There is
actually no need to include bsd.subdir.mk from bsd.test.mk as bsd.prog.mk
and bsd.obj.mk will do so in the proper order. The description in r257095
covers this for FILES and was fixed differently, though changing the
handling of target(install) in bsd.prog.mk may make sense after more
research.
4. bsd.progs.mk had extra logic to handle recursing SCRIPTS if PROGS was
empty, which isn't its business to be doing. SCRIPTS is handled fine
by bsd.prog.mk. This mostly reverts and reworks the fix in r259209 and
partially reverts r272055.
5. bsd.progs.mk has no need to depend 'all:' on SCRIPTS and FILES. These
are handled by bsd.prog.mk/bsd.files.mk fine. This also partially reverts
r272055.
6. bsd.progs.mk was not drop-in safe for bsd.prog.mk. Move the PROGS
check from r273186 to allow it to be used safely.
Specific tested cases:
SCRIPTS:no PROGS:no FILES:yes SUBDIR:yes
usr.bin/bmake/tests/sysmk/t1/2
SCRIPTS:yes PROGS:no FILES:yes SUBDIR:no
usr.bin/bmake/tests/sysmk/t1/2/1
SCRIPTS:yes PROGS:yes FILES:yes SUBDIR:yes
lib/libthr/tests
SCRIPTS:yes PROGS:no FILES:yes SUBDIR:no
usr.bin/yacc/tests
libexec/atf/atf-sh/tests
A full buildworld/installworld/clean comparison with mtree was also done.
The only relevant difference was the new fixed behavior of removing
Kyuafile.auto from the objdir in 'clean'.
Converting SCRIPTS to be a special case FILES group will make this less
fragile and is being explored.
One known remaining issue is 'cleandepend' removing the tags files for
every recursive call.
Note that the 'make clean' command runs for the CURDIR last, which can make
it appear to run multiple times when cleaning in tests/, but each command is
for a SUBDIR returning up the chain. This is purely bsd.subdir.mk behavior.
PR: 191055
PR: 191955
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
In the first build the TOOLSDIR does not exit yet which causes CC to default
to the sys.mk version. Once a TOOLSDIR is created during the build though,
this logic was changing CC to ${TOOLSDIR}/usr/bin/cc even though that file
did not exist. Thus CC went from 'cc' to '/usr/bin/cc' which forced a
rebuild of everything while using the same compiler. Check that TOOLSDIR is
not empty to avoid this. If there is actually a TOOLSDIR cc then it will be
used and properly rebuild.
Sponsored by: EMC / Isilon Storage Division
Filemon(4) will record paths as they are seen, not as fully resolved. make(1)
will take the .MAKE.META.IGNORE_PATHS values and resolve them. This creates
a discrepancy if CCACHE_DIR is a symlink. Fix this by ensuring it is
resolved for its actual usage.
Submitted by: sjg
When inspecting this value it is more expected to have it show the
automatically-created directory value rather than CURDIR.
Sponsored by: EMC / Isilon Storage Division
This limits CLEANFILES removal to just bsd.obj.mk now and removes the need
for NOPATH_FILES.
This reverts r96529 which was done due to the command line being too long
for libc. Since then all architectures now use 256k for ARG_MAX (r170102).
Regardless of that, the libc CLEANFILES is only 72k now. Others
may be larger but not likely to hit the limit. If needed, we can improve
the bsd.obj.mk clean: target to split up the list via bmake features.
This also removes some workarounds that are no longer needed.
- a.out removal
- OBJS.tmp, which has not been needed since r117080.
- *.so, which has not been needed since a .so->.So rename in r42450.
This also fixes STATICOBJS and SHLIB_LINK not being in the .NOPATH list.
Sponsored by: EMC / Isilon Storage Division
r284708 addressed this slightly but seems to have put the make(showconfig)
guard in the wrong place. Rather than guard setting the default obj directory,
guard inclusion of auto.obj.mk. This avoids creating SRCTOP/obj and
SRCTOP/release/obj when running makeman.
Sponsored by: EMC / Isilon Storage Division
