This typo keeps us from properly routing an interrupt for CardBus
bridges on this machine. So, now we look for $PIR and then _PIR to
cope. With these changes, the Libretto L1 now works properly.
Evidentally, the idea comes from patch that the Japanese version of
RedHat (or against a Japanese version of Red Hat), but my Japanese
isn't good enough to to know for sure.
Reported by: Hiroyuki Aizu-san <eyes@navi.org>
# This may be an MFC candidate, but I'm not yet sure.
sleeping on a process object but changed the corresponding
wakeup()s to the thread object. The result was that non-raw
aio ops waited for an aio daemon to timeout before action
was taken. Now, we sleep on the thread object.
PR: kern/34016
operation. The vgonel() code has always called vclean() but until we
started proactively freeing vnodes it would never actually be called with
a dirty vnode, so this situation did not occur prior to the vnlru() code.
Now that we proactively free vnodes when kern.maxvnodes is hit, however,
vclean() winds up with work to do and improperly generates the warnings.
Reviewed by: peter
Approved by: re (for MFC)
MFC after: 1 day
a simple version of bcopy() so we avoid picking up the overly-complex
implementation in libc (via libstand). This is not necessary on
-current, but RELENG_4 has apparently just exceeded the 15-sector
limit for boot1.
Reviewed by: wilko
likely looking rate calculation.
Install interrupt handler before calling ich_init as the initialization
occasionally generates spurious interrupts.
These changes are derived from cg's work in progress version of this
driver.
socket so that routing daemons and other interested parties
know when an interface is attached/detached.
PR: kern/33747
Obtained from: NetBSD
MFC after: 2 weeks
db_machdep.h to fix the link failure (multiple definitions)
caused by disabling the emission of common symbols. As a result,
there were no definitions at all. While here, remove useless
declarations.
because the buffers we use could end up spanning a 64k boundary.
Unfortunately it causes too much bloat (228 -> 72 bytes free) to
just reinstate the old malloc() function.
Instead, define a structure that contains all 4 buffers which must
not cross 64k boundaries. We allocate a 64k-aligned instance in
main() using the magic that was in the old boot2 malloc() function.
This brings the free space down to 168 bytes, but that is still
better than it was before revision 1.35 (136 bytes).
Reported by: Mike Brancato <funnyguy@digitalsmackdown.net>
Pointy-hat to: iedowse
at insert time. When asking gibbs for approval for an MFC, this was
his reply:
1) It leaks memory if it can't allocate a path.
2) It defers allocation of aic->path until the call to scan the
bus. This means the path may be NULL when an interrupt occurs
prior to the call to scan the bus (stray bus reset for instance),
which will lead to a panic.
3) The driver in current doesn't recover from the failure to allocate
aic->path. The driver doesn't check during normal operation if
the path is NULL, so again a panic will result.
4) aic_cam_rescan calls malloc with M_WAITOK. aic_cam_rescan is called
from attach where it isn't necessarily safe to sleep.
5) And most importantly, it co-opts the xpt_periph from the driver level.
This was never part of the design (xpt_periph used to be static). Making
a call of this type may completely confuse the XPT if other XPT operations
are ongoing.
In the long term, Justin and Warner agreed to implement solution where
CAM itself will initiate the bus rescan if a new bus is added. For
the time being (and in particular in light of the upcoming 4.5
release), we now have camcontrol available on the boot floppy, and can
have pccardd initiate the rescan through it.
previous commit, it should always print due to lack of {} around the
second line in the if statement. The message should likely say
something more like "There's no hardware responding at this IRQ.
Device not present (or disbaled)," but that is too long. We generally
don't give elementary advise in device driver messages anyway. Be
that as it may, the problem with it printing all the time should be
corrected.
which caused incomplete snapshots to be taken. When background
fsck would run on these snapshots, the result would be files
being incorrectly released which would subsequently panic the
kernel with ``handle_workitem_freefile: inodedep survived'',
``handle_written_inodeblock: live inodedep'', and
``handle_workitem_remove: lost inodedep'' errors.
and the reference to db_regs is *extern* from alpha/include/db_machdep.h
(put it in alpha/alpha/machdep.c)- this avoids the problems we've had
about different 'common' sizes prohibiting the kernel from linking.
One to notify the system that the MTU for VLAN can be 1500 so the vlan
will automatically be configured with a 1500 MTU the other is to ignore
the error case if the received frame is to long.
The frame size notification came from code in the SIS driver, and
the support for long frames derived from the NetBSD Tulip driver.
Tested on: 4 port D-Link adapter DFE-570TX 4 Intel 21143
Netgear card with 82c169 PNIC 10/100BaseTX
Reviewed by: ru (manpage), wpaul (not objected to), archie
Approved by: imp
Obtained from: NetBSD
cpuid with %eax=1 will return a logical cpu count in bits 16-23 of %ebx.
Bit 29 is actually 'TM' according to AP-485. This signifies the presence
of the thermal control circuit (which I believe can slow the clock down
to reduce core temperature).
they make it through to userland. This should fix the p5-smp problem
without affecting the other cpus (eg: cyrix, see initcpu.c and the special
cache handling for these cpu types).
o Remove bogus flags that aren't used (if we need them in the future, we can
add them back).
o Add support for the TI-1031. This is the only YENTA compatible PCI-PCMCIA
bridge that I'm aware of (all the others are PCIC on a PCI bus, which is
different).
seem to be too short for the 500 Mhz DS20 I'm testing on. The rather
arbitrary numbers are rather bogus anyways. We should probably have
variables for these limits that are calibrated in the MD startup code
somehow.
NULL rather than curproc. Without this, if we trap early before
curthread is set, we recursively panic.
- In an SMP kernel, if we trap before curthread is set, then trap is going
to recursively panic trying to bump td->td_md.md_kernnest. The trap is
fatal anyways, so to make debugging easier just call printtrap() to
dump the trap info to the console and then halt.
involving file removal or file update were not always being fully
committed to disk. The result was lost files or corrupted file data.
This change ensures that the filesystem is properly synced to disk
before the filesystem is down-graded.
This delta also fixes a long standing bug in which a file open for
reading has been unlinked. When the last open reference to the file
is closed, the inode is reclaimed by the filesystem. Previously,
if the filesystem had been down-graded to read-only, the inode could
not be reclaimed, and thus was lost and had to be later recovered
by fsck. With this change, such files are found at the time of the
down-grade. Normally they will result in the filesystem down-grade
failing with `device busy'. If a forcible down-grade is done, then
the affected files will be revoked causing the inode to be released
and the open file descriptors to begin failing on attempts to read.
Submitted by: "Sam Leffler" <sam@errno.com>
itself, it's used outside the Linuxulator. Reimplement the
function so that its behaviour matches the current renaming
scheme. It's probably better to formalize these interdependencies.
Backout revision 1.56 and 1.57 of fifo_vnops.c.
Introduce a new poll op "POLLINIGNEOF" that can be used to ignore
EOF on a fifo, POLLIN/POLLRDNORM is converted to POLLINIGNEOF within
the FIFO implementation to effect the correct behavior.
This should allow one to view a fifo pretty much as a data source
rather than worry about connections coming and going.
Reviewed by: bde
done with boot1 on the alpha. We use 4k buffers regardless of the
actual filesystem block size.
Remove the simple malloc() implementation, as it is no longer used.
server side. This can lead to a system deadlock.
Reviewed by: iedowse
Tested by: Alexey G Misurenko <mag@caravan.ru>, iedowse
Bug found with help by: Alexey G Misurenko <mag@caravan.ru>
MFC at: earliest convenience
detect 3.3V cards for the 6710 and another method for the 6722. This
latter method is also how the 6729/6730 is supposed to detect 3.3V
cards. This method works great on my Fujitsu Stylistic 500. Sadly,
it appears that not all laptop makers are as detail oriented as the
folks that made the Stylistic. IBM Thinkpad 701C and AST Asentia 810N
both hang hard when the 6729 method is used, but at least the thinkpad
works when the 6710 method is used. The failure mode appears to be any
access to the memory that we've mapped the CIS in causes the machine to
hang until you eject the card. The Thinkpad, at least, works with this
change, and it doesn't break my Stylistic.
MFC after: 4 days
than necessary.
o Move a rarely-used goto label inside a critical section so that we don't
perform an splnet() for which there is no corresponding splx().
o Remove unnecessary splnet()/splx() around accesses to kaioinfo::kaio_jobdone
in aio_return().
o Use TAILQ_FOREACH for simple cases of iteration over kaioinfo::kaio_jobdone.
functions just grab f_data and don't muck with anything else so this
should be ok.
this fixes a panic with invariants where it thinks we've doubly initialized
the filetmp mutex even though all we've done is neglect to bzero it.
vfs.nfs.iodmaxidle (idle time before nfsiod's exit). Make it adaptive
so that we create nfsiod's on demand and they go away after not being
used for a while. The upper limit is NFS_MAXASYNCDAEMON (currently 20).
More will be done here, but this is a useful checkpoint.
Submitted by: Maxime Henrion <mux@qualys.com>
which was causing the link of the kernel to fail. Since layer4/i4b_l4mgmt.c
is always required by i4b and layer3/i4b_q931.c is only needed when a
passive card is present it makes sense to have the declaration in the
former file only.
No MFC required since the problem only became apparent after a change to
the compile options in -current which AFAIK wasn't made in -stable.
Seigo Tanimura (tanimura) posted the initial delta.
I've polished it quite a bit reducing the need for locking and
adapting it for KSE.
Locks:
1 mutex in each filedesc
protects all the fields.
protects "struct file" initialization, while a struct file
is being changed from &badfileops -> &pipeops or something
the filedesc should be locked.
1 mutex in each struct file
protects the refcount fields.
doesn't protect anything else.
the flags used for garbage collection have been moved to
f_gcflag which was the FILLER short, this doesn't need
locking because the garbage collection is a single threaded
container.
could likely be made to use a pool mutex.
1 sx lock for the global filelist.
struct file * fhold(struct file *fp);
/* increments reference count on a file */
struct file * fhold_locked(struct file *fp);
/* like fhold but expects file to locked */
struct file * ffind_hold(struct thread *, int fd);
/* finds the struct file in thread, adds one reference and
returns it unlocked */
struct file * ffind_lock(struct thread *, int fd);
/* ffind_hold, but returns file locked */
I still have to smp-safe the fget cruft, I'll get to that asap.
that va_mode of the supplied attributes is filled in with a valid
file mode (i.e not VNOVAL, and only ALLPERM bits set). However,
some NFS server op functions didn't guarantee this for all possible
request messages:
If a V3 client chose not include to a mode specification, we could
end up creating an ffs inode with mode 0177777, requiring a manual
fsck on the next reboot. Fix this by setting va_mode to 0 before
calling the VOP if a mode hasn't been supplied by the client.
In nfsrv_symlink(), S_IFMT bits supplied by a V2 client could end
up in the va_mode passed to VOP_SYMLINK with similar effects. We
now use the macro nfstov_mode() to correctly mask the bits.
motherboard chipsets. We need to force the chip to reload its MAC address
into the receive filter, and enable software access mode for the PHY.
PR: kern/33294
lost if some other process uses the lock while we are sleeping. We
restore it after we have slept. This functionality is provided by
a new routine interlocked_sleep() that wraps the interlocking with
functions that sleep. This function is then used in place of the
old ACQUIRE_LOCK_INTERLOCKED() and FREE_LOCK_INTERLOCKED() macros.
Submitted by: Debbie Chu <dchu@juniper.net>
semantics of the nfsm_reply() macro were changed so that the caller
has to explicitly handle the V2 error case, whereas before,
nfsm_reply() did a `goto nfsmout' then. A few server ops (setattr,
readlink, create, mkdir) weren't updated to match, so errors in the
V2 case could cause protocol hangs and leaked mbufs.
Correct some comments that describe the old nfsm_reply behaviour.
[older, harmless nit] Remove the unnecessary `nfsmreply0' label in
nfsrv_create(), since for its users, the main `ereply' label does
the same thing.
but since the nfs cleanup, it hasn't done so in the case where
`error' is EBADRPC. Callers of this macro expect it to initialise
*mrq, and the `nfsmout' exit point expects a reply to be allocated
if error == 0. When nfsm_reply() was called with error = EBADRPC,
whatever junk was in *mrq (often a stale pointer to an old reply
mbuf) would be assumed to be a valid reply and passed to pru_sosend(),
causing a crash sooner or later.
Fix this by allocating a reply even in the EBADRPC case like we
used to do. This bug was specific to -current.
intermodule communication is done via kobj calls. If anything
currently depends on them, let it break so that we can fix it. Maybe
we'll need to export some of the card_if.c or power_if.c symbols, but
I think those should be in the base kernel (since all *_if.c should be
in the base kernel for just these reasons).
in softdep_sync_metadata(). Otherwise we may miss dependencies
that need to be flushed which will result in a later panic
with the message ``vinvalbuf: dirty bufs''.
Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
MFC after: 1 week
larger than 8k. We now use 4k buffers regardless of the filesystem
block size, so there is no longer a static limit.
Simply increasing the buffer size from 8k to 16k as done on the
i386 doesn't work on the alpha, probably because it causes us
to overshoot boot1's 48k runtime memory limit.
Tested by: naddy
are checked on the way in even if they were not calculated on the
way out.
This fixes rwhod
PR: 31954
Submitted by: fenner
Approved by: fenner
MFC after: 1 week
(We should be able to handle locally originated IP packets, and
these do not have m_pkthdr.rcvif set.)
PR: kern/32806, kern/33766
Reviewed by: luigi
Fix tested by: Maxim Konovalov <maxim@macomnet.ru>,
Erwin Lansing <erwin@lansing.dk>
