The only output from fsck that should go to stderr is the usage message.
if setup() fails then exit with EEXIT rather than 0.
Reviewed by: mckusick
Sponsored by: Netflix
This is a follow up change to r364321 after a discussion about the style.
All near by places use extra blanks in format strings, and while use of the
format string to provide the extra blank may need more cycles than adding 1
to twidth, it generates shorter code and is clearer in the opinion of some
reviewers of the previous change.
Not objected to by: emaste
MFC after: 3 days
- Initialize the disk device fd field in connection_new().
- Close the disk device after handing the connection over
to a child worker.
- Avoid re-opening a disk device for each connection from
the same client, avoiding an fd leak.
PR: 132845
Submitted by: Yoshihiro Ota <ota@j.email.ne.jp>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26168
The macOS assert.h header does not define static_assert when compiling in
C99 mode. To fix this compile with -std=c11.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D25928
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
We have both a system of 'kern' and of 'kernel'. Prefer the latter and
convert this notification to use 'kernel' instead of 'kern'. As a
transition period, continue to also generate the 'kern' notification
until sometime after FreeBSD 13 is branched.
MFC After: 3 days
-n omits the name of the variable regardless of the type of information that is
requested. Rephrase to clarify this point.
PR: 242191
Submitted by: stilezy@gmail.com
Approved by: emaste@
Differential Revision: https://reviews.freebsd.org/D26149
MOUNT notifies when a filesystem is mounted
REMOUNT notifies when a filesystem is mounted again
UNMOUNT notifies when a filesystem is unmounted
These events are asynchronous to the actual state of the event (though the data
is recorded at a time when it is stable). The mount event is reported after the
filesystem is mounted. However, in the interim it may be unmounted by another
agent. Likewise, umount is called just before the mountpoint is finished tearing
down. It may be remounted (or maybe if the process scheduling is wonky and devd
gets to run before the last few steps are complete).
Sponsored by: Netflix
Diffential Revision: https://reviews.freebsd.org/D25969
Amiga is a proper noun
Condition is traditionally spelled starting with 'c'
Some, but not all, of the over/under-voltage instances were hyphenated.
Since they are all adverb phrases, they all need to be hyphenated.
Pointy hat: imp
Currently, the output of `bectl list` doesn't align the 'Mountpoint' column
correctly when the 'mounted' property of a boot environment dataset is longer
than the default column width.
Set the 'Mountpoint' column width to the boot environment dataset with the
longest 'mounted' property or to the default width, whichever is greater.
PR: 241064
Reported by: vermaden@interia.pl
Reviewed by: kevans (mentor)
Approved by: kevans (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26048
The pmu(4) and adb(4) drivers on powerpc generate PMU events. Document them.
The allwinner power modules also generate these events. Document those as well.
MFC After: 3 days
Sort system type alphabetically.
Remove some commas that aren't in the devd notification messages.
MFC After: 3 days
Reviewed by: 0mp (earlier versions), jhb (useful feedback on earlier versions)
Differential Revision: https://reviews.freebsd.org/D26105
Remove PC Card specific information. It's of little value these days and on
the way out after most of its drivers have been removed.
Use iwn instead of wi device.
From the PR:
When I run `ipfw -t list` on release/12 or current, I get misaligned
output between lines that do and do not have a last match timestamp,
like so:
00100 Tue Aug 11 03:03:26 2020 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
(specifically, the "allow" and "deny" strings do not line up)
PR: 248608
Submitted by: Taylor Stearns
MFC after: 3 days
For flags and checks the order goes VHT160 and then VHT80P80 unless
checks are in reverse order ("more comes first") in which case we
deal with VHT80P80 first.
The one reverse order to pick out is where we check channel
prefernences. While it may seem that VHT160 is better, finding
two "free" channels (VHT 80+80) is more likely so we do prefer that.
While dealing with VHT160 and VHT80P80 add extra clauses previously
missing or marked TODO in a few places.
Reviewed by: adrian, gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26002
The standard uses 80+80 and 80p80 but nowhere 80_80.
Switch the latter to 80P80 for all the macros and comments refering
to #defined flags which I could find.
The only place we leave as 80p80 is the ifconfig command line arguments
as we spell them all in lower case.
Ideally we would use 80+80 for any interactions with the user and
80P80 for anything internal but let us not confuse parsers and
hence avoid the '+' in either case.
Reviewed by: adrian, gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26001
Rather then using magic numbers duplicate IEEE80211_FVHT_VHT* in
ifconfig (cleanup of these and other flags used and not exposed by
net80211 should happen later) and use those.
In the kernel this simplifies one ioctl path (the other one currently
relies on individual bit flags being passed in).
We also re-order the 80P80 and 160 flag for 160 to come before 80+80
and more clearly leave the flags as TODO in one of the 160/80+80 cases.
Reviewed by: adrian
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26000
"df", "rf" and "offset". This allows to match on specific
bits of ip_off field.
For compatibility reasons lack of keyword means "offset".
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D26021
libifconfig_sfp.h provides an API in libifconfig for querying SFP module
properties, operational status, and vendor strings, as well as descriptions
of the various fields, string conversions, and other useful helpers for
implementing user interfaces.
SFP module status is obtained by reading registers via an I2C interface.
Descriptions of these registers and the values therein have been collected
in a Lua table which is used to generate all the boilerplace C headers and
source files for accessing these values, their names, and descriptions.
The generated code is fully commented and readable.
This is the first use of libifconfig in ifconfig itself. For now, the
scope remains very limited. Over time, more of ifconfig will be replaced
with libifconfig.
Some minor changes to the formatting of ifconfig output have been made:
- Module memory hex dumps are indented one extra space as a result of using
hexdump(3) instead of a bespoke hex dump function.
- Media descriptions have an added two-character short-name in parenthesis.
- QSFP modules were incorrectly displaying TX bias current as power. Now
TX channels display bias current, and this change has been made for both
SFP and QSFP modules for consistency.
A Lua binding for libifconfig including this functionality is implemented
but has not been included in this commit. The plan is for it to be
committed after dynamic module loading has been enabled in flua.
Reviewed by: kp, melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25494
Add IEEE80211_IOC_IC_NAME to query the ic_name field and in ifconfig
to print the parent interface again. This functionality was lost
around r287197. It helps in case of multiple wlan interfaces and
multiple underlying hardware devices to keep track which wlan
interface belongs to which physical device.
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Reviewed by: adrian, Idwer Vollering
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25832
Enhance camcontrol(8) so that it's possible to manually set frequency for SD/MMC cards.
While here, display more information about the current controller, such as
supported operating modes and VCCQ voltages, as well as current VCCQ voltage.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D25795
Add tests to cover "add", "change" and "delete" functionality of /sbin/route
for ipv4 and ipv6. These tests for the existing route tool are the first step
towards creating libroute.
Submitted by: Ahsan Barkati
Sponsored by: Google, Inc. (GSoC 2020)
Reviewed by: kp, thj
Approved by: bz (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D25220
Those rules have been broken at least since 8-STABLE, when the port
providing the ezdownload binary was removed (misc/ezload).
Reviewed by: kevans, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25686
This is mostly an exercise to set variables to NULL/0 when declared, but
one was ensuring a string variable was set before printing it.
We should never see "<unknown>" in a printed rule; if we do then this code
definitely has some bugs that need addressing.
struct _ipfw_dyn_rule is defined as packed, and as a result, its
uint64_t fields are misaligned on some 32-bit platforms. Since
pr_u64() is explicitly supposed to handle this case, avoid using a
uint64_t * for the input pointer to make sure that the compiler won't
(correctly) warn about the misalignment.
Reported by: jenkins
MFC with: r363164
