and replace with software-testable sysctl node (security.audit) that
can be used to detect kernel audit support.
Obtained from: TrustedBSD Project
Approved by: re (kensmith)
- In audit_bsm.c, make sure all the arguments: ARG_AUID, ARG_ASID, ARG_AMASK,
and ARG_TERMID{_ADDR} are valid before auditing their arguments. (This is done
for both setaudit and setaudit_addr.
- Audit the arguments passed to setaudit_addr(2)
- AF_INET6 does not equate to AU_IPv6. Change this in au_to_in_addr_ex() so the
audit token is created with the correct type. This fixes the processing of the
in_addr_ex token in users pace.
- Change the size of the token (as generated by the kernel) from 5*4 bytes to
4*4 bytes (the correct size of an ip6 address)
- Correct regression from ucred work which resulted in getaudit() not returning
E2BIG if the subject had an ip6 termid
- Correct slight regression in getaudit(2) which resulted in the size of a pointer
being passed instead of the size of the structure. (This resulted in invalid
auditinfo data being returned via getaudit(2))
Reviewed by: rwatson
Approved by: re@ (kensmith)
Obtained from: TrustedBSD Project
MFC after: 1 month
mpo_check_proc_setaudit_addr to be used when controlling use of
setaudit_addr(), rather than mpo_check_proc_setaudit(), which takes a
different argument type.
Reviewed by: csjp
Approved by: re (kensmith)
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.
Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.
We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.
Reviewed by: csjp
Obtained from: TrustedBSD Project
embedded storage in struct ucred. This allows audit state to be cached
with the thread, avoiding locking operations with each system call, and
makes it available in asynchronous execution contexts, such as deep in
the network stack or VFS.
Reviewed by: csjp
Approved by: re (kensmith)
Obtained from: TrustedBSD Project
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
argument from being file descriptor index into the pointer to struct file:
part 2. Convert calls missed in the first big commit.
Noted by: rwatson
Pointy hat to: kib
remove associated comments.
Slip audit_file_rotate_wait assignment in audit_rotate_vnode() before
the drop of the global audit mutex.
Obtained from: TrustedBSD Project
inline it when needed already, and the symbol is also required outside of
audit.c. This silences a new gcc warning on the topic of using __inline__
instead of __inline.
MFC after: 3 days
where similar data structures exist to support devfs and the MAC
Framework, but are named differently.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
variable name conventions for arguments passed into the framework --
for example, name network interfaces 'ifp', sockets 'so', mounts 'mp',
mbufs 'm', processes 'p', etc, wherever possible. Previously there
was significant variation in this regard.
Normalize copyright lists to ranges where sensible.
labels: the mount label (label of the mountpoint) and the fs label (label
of the file system). In practice, policies appear to only ever use one,
and the distinction is not helpful.
Combine mnt_mntlabel and mnt_fslabel into a single mnt_label, and
eliminate extra machinery required to maintain the additional label.
Update policies to reflect removal of extra entry points and label.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
the introduction of priv(9) and MAC Framework entry points for privilege
checking/granting. These entry points exactly aligned with privileges and
provided no additional security context:
- mac_check_sysarch_ioperm()
- mac_check_kld_unload()
- mac_check_settime()
- mac_check_system_nfsd()
Add mpo_priv_check() implementations to Biba and LOMAC policies, which,
for each privilege, determine if they can be granted to processes
considered unprivileged by those two policies. These mostly, but not
entirely, align with the set of privileges granted in jails.
Obtained from: TrustedBSD Project
- Redistribute counter declarations to where they are used, rather than at
the file header, so it's more clear where we do (and don't) have
counters.
- Add many more counters, one per policy entry point, so that many
individual access controls and object life cycle events are tracked.
- Perform counter increments for label destruction explicitly in entry
point functions rather than in LABEL_DESTROY().
- Use LABEL_INIT() instead of SLOT_SET() directly in label init functions
to be symmetric with destruction.
- Align counter names more carefully with entry point names.
- More constant and variable name normalization.
Obtained from: TrustedBSD Project
- Add a more detailed comment describing the mac_test policy.
- Add COUNTER_DECL() and COUNTER_INC() macros to declare and manage
various test counters, reducing the verbosity of the test policy
quite a bit.
- Add LABEL_CHECK() macro to abbreviate normal validation of labels.
Unlike the previous check macros, this checks for a NULL label and
doesn't test NULL labels. This means that optionally passed labels
will now be handled automatically, although in the case of optional
credentials, NULL-checks are still required.
- Add LABEL_DESTROY() macro to abbreviate the handling of label
validation and tear-down.
- Add LABEL_NOTFREE() macro to abbreviate check for non-free labels.
- Normalize the names of counters, magic values.
- Remove unused policy "enabled" flag.
Obtained from: TrustedBSD Project
calls. Add MAC Framework entry points and MAC policy entry points for
audit(), auditctl(), auditon(), setaudit(), aud setauid().
MAC Framework entry points are only added for audit system calls where
additional argument context may be useful for policy decision-making; other
audit system calls without arguments may be controlled via the priv(9)
entry points.
Update various policy modules to implement audit-related checks, and in
some cases, other missing system-related checks.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
tokens. Currently, we do not support the set{get}audit_addr(2) system
calls which allows processes like sshd to set extended or ip6
information for subject tokens.
The approach that was taken was to change the process audit state
slightly to use an extended terminal ID in the kernel. This allows
us to store both IPv4 IPv6 addresses. In the case that an IPv4 address
is in use, we convert the terminal ID from an struct auditinfo_addr to
a struct auditinfo.
If getaudit(2) is called when the subject is bound to an ip6 address,
we return E2BIG.
- Change the internal audit record to store an extended terminal ID
- Introduce ARG_TERMID_ADDR
- Change the kaudit <-> BSM conversion process so that we are using
the appropriate subject token. If the address associated with the
subject is IPv4, we use the standard subject32 token. If the subject
has an IPv6 address associated with them, we use an extended subject32
token.
- Fix a couple of endian issues where we do a couple of byte swaps when
we shouldn't be. IP addresses are already in the correct byte order,
so reading the ip6 address 4 bytes at a time and swapping them results
in in-correct address data. It should be noted that the same issue was
found in the openbsm library and it has been changed there too on the
vendor branch
- Change A_GETPINFO to use the appropriate structures
- Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does,
but can also handle ip6 addresses
- Adjust get{set}audit(2) syscalls to convert the data
auditinfo <-> auditinfo_addr
- Fully implement set{get}audit_addr(2)
NOTE: This adds the ability for processes to correctly set extended subject
information. The appropriate userspace utilities still need to be updated.
MFC after: 1 month
Reviewed by: rwatson
Obtained from: TrustedBSD
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
it isn't used in the access control decision. This became visible to
Coverity with the change to a function call retrieving label values.
Coverity CID: 1723
LABEL_TO_SLOT() macro used by policy modules to query and set label data
in struct label. Instead of using a union, store an intptr_t, simplifying
the API.
Update policies: in most cases this required only small tweaks to current
wrapper macros. In two cases, a single wrapper macros had to be split into
separate get and set macros.
Move struct label definition from _label.h to mac_internal.h and remove
_label.h. With this change, policies may now treat struct label * as
opaque, allowing us to change the layout of struct label without breaking
the policy module ABI. For example, we could make the maximum number of
policies with labels modifiable at boot-time rather than just at
compile-time.
Obtained from: TrustedBSD Project
Don't perform a nested include of _label.h in mac.h, as mac.h now
describes only the user API to MAC, and _label.h defines the in-kernel
representation of MAC labels.
Remove mac.h includes from policies and MAC framework components that do
not use userspace MAC API definitions.
Add _KERNEL inclusion checks to mac_internal.h and mac_policy.h, as these
are kernel-only include files
Obtained from: TrustedBSD Project
(due to an early reset or the like), remember to unlock the socket lock.
This will not occur in 7-CURRENT, but could in theory occur in 6-STABLE.
MFC after: 1 week
been introduced to the MAC framework:
mpo_associate_nfsd_label
mpo_create_mbuf_from_firewall
mpo_check_system_nfsd
mpo_check_vnode_mmap_downgrade
mpo_check_vnode_mprotect
mpo_init_syncache_label
mpo_destroy_syncache_label
mpo_init_syncache_from_inpcb
mpo_create_mbuf_from_syncache
MFC after: 2 weeks [1]
[1] The syncache related entry points will NOT be MFCed as the changes in
the syncache subsystem are not present in RELENG_6 yet.
exclusive access if there is at least one thread waiting for it to
become available. This may significantly reduce overhead by reducing
the number of unnecessary wakeups issued whenever the framework becomes
idle.
Annotate that we still signal the CV more than necessary and should
fix this.
Obtained from: TrustedBSD Project
Reviewed by: csjp
Tested by: csjp
