And expose vm_memattr_t of current mapping to consumers (as well as the
ability to change it to one of UC, WB, WC).
After short discussion with: jhb (but no review)
Sponsored by: EMC / Isilon Storage Division
- Add error handling for urtwn_(r88e_)read_rom() and
urtwn_efuse_*() functions.
- Remove code duplication between urtwn_efuse_read() and
urtwn_r88e_read_rom().
- Merge r88e_rom and (r92c_)rom structures
(only one of them can be used at the same time).
- Other minor fixes / improvements.
Tested with RTL8188EU, STA mode
(URTWN_DEBUG + USB_DEBUG, hw.usb.urtwn.debug=3, no visual differences).
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4253
Adds a new tunable, ntb.hw.b2b_mw_idx, which specifies the offset (from the
total number of memory windows) to use for register access on hardware with
the SDOORBELL_LOCKUP errata. The default is -1, i.e., the last memory
window.
We map BARs before the b2b_mw_idx is selected, so map them all as memory
windows initially. The register memory window should not be write-combined,
so we explicitly disable WC on the selected MW later.
This introduces a layer of abstraction between consumer memory window
indices, which exclude any exclusive errata-workaround BARs, and internal
memory window indices, which include such BARs. An internal routine,
ntb_user_mw_to_idx(), converts the former to the latter. Public APIs have
been updated to use this instead of assuming the exclusive workaround BAR is
the last available MW.
Sponsored by: EMC / Isilon Storage Division
Replace tlb_flush_local() by tlb_flush() as even not global mappings
could be fetched to TLB(s) on other cores by speculative table walk.
From OS point of view, it was not a problem as either such mappings
were not used anymore or they were flushed from TLB(s) when reused.
However, from hardware point of view, it was a problem. Not flushed
mappings could be a target for speculative reads or prefetches (which
might be quite aggresive on ARM cores). As speculative read can fill
cacheline, it can cause a real problem, when physical page is reused,
but mapped with different memory attributes.
Anyhow, it's good to have only valid mappings in TLB(s).
Approved by: kib (mentor)
place physical memory at an address outside the old DMAP range. This is an
issue as we rely on being able to move from PA -> VA using this range.
Obtained from: Patrick Wildt <patrick@bitrig.org> (earlier version)
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D3885
targets. See the comment above wantfreevnodes variable for the
description of the algorithm.
The vfs.vlru_alloc_cache_src sysctl is removed. New code frees
namecache sources as the last chance to satisfy the highest watermark,
instead of selecting the source vnodes randomly. This provides good
enough behaviour to keep vn_fullpath() working in most situations.
The filesystem layout with deep trees, where the removed knob was
required, is thus handled automatically.
Submitted by: bde
Discussed with: mckusick
Tested by: pho
MFC after: 1 month
lwsync instruction, which does not provide Store/Load barrier. Fix
this by using "full" sync barrier for mb().
atomic_store_rel() does not need full barrier, change mb() call there
to the lwsync instruction if not hitting the known CPU erratas
(i.e. on 32bit). Provide powerpc_lwsync() helper to isolate the
lwsync/sync compile time selection, and use it in atomic_store_rel()
and several other places which duplicate the code.
Noted by: alc
Reviewed and tested by: nwhitehorn
Sponsored by: The FreeBSD Foundation
This should be a big no-op pass; and reduces the size of if_ath.c.
I'm hopefully soon going to take a whack at the USB support for ath(4)
and this'll require some reuse of the busdma memory code.
bridges. Currently this includes information about what resources a
bridge decodes on the upstream side for use by downstream devices including
bus numbers, I/O port resources, and memory resources. Windows and bus
ranges are enumerated for both PCI-PCI bridges and PCI-CardBus bridges.
To simplify the implementation, all enumeration is done by reading the
appropriate config space registers directly rather than querying the
bridge driver in the kernel via new ioctls. This does result in a few
limitations.
First, an unimplemented window in a PCI-PCI bridge cannot be accurately
detected as accurate detection requires writing to the window base
register. That is not safe for pciconf(8). Instead, this assumes that
any window where both the base and limit read as all zeroes is
unimplemented.
Second, the PCI-PCI bridge driver in a tree has a few quirks for
PCI-PCI bridges that use subtractive decoding but do not indicate that
via the progif config register. The list of quirks is duplicated in
pciconf's source.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4171
It is called when last reference to named object is going to be released
and allows to do additional cleanup for implementation of named objects.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
new, simplified, ELF ABI that avoids some of the stranger aspects of the
existing 64-bit PowerPC ABI (function descriptors, in particular). Actually
generating such executables requires a new version of binutils and a newer
compiler (either GCC or clang) than GCC 4.2.1.
Hacks to enable target mode there complicated code, while didn't really
work. And for outdated hardware fixing it is not really interesting.
Initiator mode tested with Qlogic 1080 adapter is still working fine.
sysentvec. This allows the timekeep data to be shared between similar
ABIs which cannot share sysentvec.
Make the timekeep_push_vdso() tick callback to the timekeep structures
instead of sysentvecs. If several sysentvec share the vdso_sv_tk
structure, we would update the userspace data several times on each
tick, without the change.
Only allocate vdso_sv_tk in the exec_sysvec_init() sysinit when
sysentvec is marked with the new SV_TIMEKEEP flag. This saves
allocation and update of unneeded vdso_sv_tk for ABIs which do not
provide userspace gettimeofday yet, which are PowerPCs arches right
now.
Make vdso_sv_tk allocator public, namely split out and export
alloc_sv_tk() and alloc_sv_tk_compat32(). ABIs which share timekeep
data now can allocate it manually and share as appropriate.
Requested by: nwhitehorn
Tested by: nwhitehorn, pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
No behavioral changes, just cosmetics.
A partition number of zero is not a wildcard, it's the 'a' partition in
a BSD slice, so don't print it as "<auto>". (Only slices are 1-based,
unit and partition numbers are 0-based and -1 is their wildcard marker.)
Also, after doing all the probing and choosing, print the final result as
"Booting from <disk spec>" where disk spec has all the wildcards resolved
and looks like familiar BSD slice-and-partition notation (disk0s3a, etc).
While later firmware always registers for RSCN requests, older one does
it only in initiator mode. But in target mode there RSCN can be the only
way to detect gone intiator.
The r289895 revision did not accounted for the block containing the
requested page, when calculating the run of pages. Include the pages
before/after the requested page, that fit into the reqblock, into the
calculation.
Noted by: glebius
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Summary:
* Take advantage of NEW_PCIB to remove a lot of setup code.
* Fix some bugs related to multiple PCI bridges.
There's still room for more cleanup, and still some bugs leftover, but this
cleans up a lot.
Test Plan: Tested on P5020 board with IDT PCIe switch.
Differential Revision: https://reviews.freebsd.org/D4127
(opens, locks, etc) is retained, which I believe is correct behaviour.
However, for NFSv4.1, the server also retained a reference to the xprt
(RPC transport socket structure) for the backchannel. This caused
svcpool_destroy() to not call SVC_DESTROY() for the xprt and allowed
a socket upcall to occur after the mutexes in the svcpool were destroyed,
causing a crash.
This patch fixes the code so that the backchannel xprt structure is
dereferenced just before svcpool_destroy() is called, so the code
does do an SVC_DESTROY() on the xprt, which shuts down the socket upcall.
Tested by: g_amanakis@yahoo.com
PR: 204340
MFC after: 2 weeks
of the SRS (software reset) bit in the watchdog control register. Despite
what the manual seems to imply, this bit DOES trigger an immediate reset, as
opposed to simply flagging the type of reset as software-triggered.
For those chips we are not receiving login events, adding initiators
based on ATIO requests. But there is no port ID in that structure, so
in fabric mode we have to explicitly fetch it from firmware to be able
to do normal scan after that.
created for bus_dma_tag_t tag, bounce pages should be allocated
only if needed.
Before the fix, they were allocated always if BUS_DMA_COULD_BOUNCE flag
was set but BUS_DMA_MIN_ALLOC_COMP not. As bounce pages are never freed,
it could cause memory exhaustion when a lot of such tags together with
their maps were created.
Note that there could be more maps in one tag by current design.
However BUS_DMA_MIN_ALLOC_COMP flag is tag's flag. It's set after
bounce pages are allocated. Thus, they are allocated only for first
tag's map which needs them.
Approved by: kib (mentor)
