Commit Graph

3976 Commits

Author SHA1 Message Date
David E. O'Brien
1a32b4cbcf Back out rev 1.3.
This is one of the few RC scripts that doesn't use rc.subr, and thus
doesn't source rc.conf. :-(
2004-06-08 19:53:25 +00:00
David E. O'Brien
749fdbb557 Don't assume everyone's /etc/[default/]rc.conf 'entropy_file' is "/entropy". 2004-06-07 09:16:19 +00:00
Mike Makonnen
30e2462c71 Restore pre-rcNG behaviour:
SIGINT (Ctrl-c) kills the current script
SIGQUIT (Ctrl-\) kills /etc/rc (dropping you into single-user)

Prodded by:	harti
2004-06-06 18:06:09 +00:00
Gregory Neil Shapiro
022f504564 Remove trailing space.
Submitted by:	jens
2004-06-06 17:28:31 +00:00
Jens Schweikhardt
d8beb0fd3b Removed whitespace at BOF, EOL & EOF. 2004-06-06 11:46:29 +00:00
MIHIRA Sanpei Yoshiro
ce62a94c13 fix MELCO LPC3-TX entry.
I mistaked at 1.166.

Submitted by:	SARUMARU Yoshihiko <mistral@imasy.or.jp>
Pointed out by:	MORIYASU Hirano <m-hirano@konsei.co.jp>
	FreeBSD-users-jp 79808
	FreeBSD-users-jp 79816
2004-06-05 06:11:54 +00:00
Hajimu UMEMOTO
389faa192d fix typo in comment in my previous commit. 2004-06-02 09:58:18 +00:00
Hajimu UMEMOTO
b351b78a10 Add ip6addrctl_enable and ip6_addrctl_verbose option. If
ip6addrctl_enable is set to YES, address selection policy is installed
into kernel.
If there is /etc/ip6addrctl.conf, it is used for address selection
policy.  Even if there is no /etc/ip6addrctl.conf, we install default
policy.  In this case, if ipv6_enable is set to YES, we use address
selection policy described in RFC 3484 as default.  Otherwise, we
install priority policy for IPv4 address.
The default of ip6addrctl_enable is NO for now.  However, it may
better to enable it by default.
2004-06-02 09:39:49 +00:00
Kris Kennaway
0adbaf30d9 Add common share/locale directories (everything used by >= 5 ports [1]) and
/usr/local/www

[1] Semi-arbitrary cutoff, but I didn't want to add every locale directory
    used by ports, because a lot are only used by one or two, and it's less
    intrusive for these ports to just clean up after themselves.

MFC after:	2 days
2004-05-31 07:34:40 +00:00
Nate Lawson
e6228fcfdc Throw the switch and enable use of the lowest idle states while online in
addition to offline.  This can be overridden in /etc/rc.conf if it causes
trouble although this has been stable since 2003/12.
2004-05-29 04:52:37 +00:00
Max Laier
0164e9d382 Add ftp-proxy 8021/tcp in order to make the inetd.conf entry actually work.
Submitted-by:	brueffer
Approved-by:	bms(mentor)
2004-05-27 23:42:26 +00:00
Dag-Erling Smørgrav
5f3ba2f5d4 Install nsswitch. 2004-05-24 14:17:19 +00:00
Dag-Erling Smørgrav
cba155c0c2 If nsswitch.conf does not exist, create it with the default settings.
The reason for doing this is that (at least some) 4.x binaries are very
unhappy if host.conf does not exist, and if we create host.conf but not
nsswitch.conf, nsswitch.conf will be created at the next reboot, so it
is better to create a correct nsswitch.conf right away.
2004-05-24 11:53:26 +00:00
Dag-Erling Smørgrav
749f60c715 Move the task of updating nsswitch.conf / host.conf into a separate
script called nsswitch.
2004-05-24 11:48:58 +00:00
Hajimu UMEMOTO
f269dc02de drop packet which has ::1 as src or dst via other than lo0
like as rc.firewall does.

MFC after:	1 week
2004-05-24 07:27:26 +00:00
Mike Makonnen
56d01be439 Really remove the return statement this time. Thanks to
ru for noticing.
2004-05-20 15:53:49 +00:00
Mike Makonnen
63d260104a The err routine requires two arguments: an exit value and a string.
Additionaly, it will exit the script so an return statements after
calling it are superflous.
2004-05-20 14:16:05 +00:00
Pawel Jakub Dawidek
680e586479 - Install includes used by STRIPE and NOP GEOM classes.
- Create needed directories.

Supported by:	Wheel - Open Technologies - http://www.wheel.pl
2004-05-20 10:29:26 +00:00
Josef Karthauser
bb1e7a5e19 Allow the location of the INDEX file to specified to pkg_version.
This is particularly convenient on a cluster of machines to prevent
having to rebuild the INDEX file on each.

Reviewed by:	portmgr
2004-05-19 09:18:08 +00:00
Nate Lawson
ccc09458fa Change hw.acpi.cpu.cx_lowest to accept values in the form of C1,
C2, ...  Update power_profile to use the new format.  Update the
man page to reflect this and give more info on Cx states.
2004-05-07 05:22:38 +00:00
Pawel Jakub Dawidek
b6d37dc477 Add g_concat.h and g_gate.h to be installed in
/usr/include/geom/(concat|gate)/.
2004-04-30 16:21:39 +00:00
Poul-Henning Kamp
d8337944e0 Protect som cross-script invocations by checks to see that the target
script exists.  This allows pruning of rc.d scripts without getting
too many ugly boottime error message
2004-04-28 13:20:15 +00:00
Poul-Henning Kamp
8956ceaff0 Initdiskless must run before ipfw, or people will not be able to
use the conf/* stuff for their firewall configuration.

Running ipfw before could seem to make sense in that it would allow
one to setup access to the NFS server on a "default-deny" kernel,
but it is pretty obvious to the casual observer that such a configuration
never makes it far enough to mount the NFS-root in the first place.
2004-04-28 13:18:22 +00:00
Ruslan Ermilov
3ee3cd3165 Replace shell's positional parameters safely. 2004-04-28 09:09:27 +00:00
Poul-Henning Kamp
edf28a672b When using this in non-NFSroot circumstances, mount -t nfs may
return empty.  Add a dummy element to prevent the alternate action
of the shell builtin "set"
2004-04-27 15:42:34 +00:00
Simon L. B. Nielsen
f59f70e231 Removes the check for the existence of the sysctl variable
debug.watchdog since it is not created by hardware watchdog(4) devices.
The watchdog(4) device is always compiled in the kernel, so removing the
check should not cause any problems.

Approved by:	phk
2004-04-26 19:41:37 +00:00
Tim J. Robbins
ab670aebec Add an Israel Hebrew locale: he_IL.UTF-8.
PR:		65826
Submitted by:	Hye-Shik Chang
2004-04-21 15:28:23 +00:00
Darren Reed
167992ad9a Add script for checking ipv6 blocked packets from PR.
PR:		misc/50154
Submitted by:	Kimura Fuyuki <fuyuki@hadaly.org>
2004-04-20 13:44:57 +00:00
Darren Reed
da48dbe191 apply patch so pr can be closed
PR:		misc/56715
Submitted by:	grant@NetBSD.org
Reviewed by:	darrenr
2004-04-20 13:30:49 +00:00
Max Khon
ca813d2986 sendmail_submit_enable and sendmail_outbound_enable checks were reverted.
Found by:	Morten Rodal <morten@rodal.no>
2004-04-17 19:09:09 +00:00
Brooks Davis
7aa81b88a2 Actually install preseedrandom.
Reported by:	bde
2004-04-17 04:12:27 +00:00
Brooks Davis
21462105eb Remove bogus checks on the value of ${entropy_file} and hardcode out
entropy source to /entropy.  We have to assume there is no rc.conf at
this stage of the boot process.

Reported by:	njl
2004-04-15 18:23:14 +00:00
Brooks Davis
6ea20e1c98 Band-aid diskless booting by running a new preseedrandom script before
initdiskless.  The output of several commands and if available the
contents of /entropy are feed into /dev/random to kickstart the PRNG.
/etc/rc.d/initrandom is left alone to maintain the previous behavior as
much as possiable.

Further work in this area is probably needed.

Discussed with:	markm
2004-04-15 17:52:53 +00:00
Hartmut Brandt
9de3b3505c Move the SNMP MIBs and tree definitions from /usr/share/bsnmp to
/usr/share/snmp. This mirrors the use of /usr/local/share/snmp and
makes also more sense when non-bsnmp-specific MIBs go in.
2004-04-14 16:06:19 +00:00
Brooks Davis
ff356053a1 Catch up with diskless split "diskless" is no longer provided.
Suggested by:	cperciva
2004-04-12 18:11:00 +00:00
Brian Feldman
87bd2f457b Document devfs_set_rulesets a little. 2004-04-10 22:13:27 +00:00
Scott Mitchell
24c8ae76c2 Add Xircom XEM5600 card (appears to be a renamed REM56).
Observe that Xircom CEM28 and CEM33 are known to work in Ethernet mode.

Reviewed by:	imp (mentor)
2004-04-09 17:15:18 +00:00
Mark Murray
37c79b8006 Take into account hardware-supplied entropy. If the entropy source
is hardware, the Yarrow initialisations don't need to be done.
2004-04-09 15:56:16 +00:00
Wes Peters
85d4d6aa5b Style fixes, as suggested by Jens Schweikhardt <schweikh@schweikhardt.net> 2004-04-06 23:15:48 +00:00
Wes Peters
6e46025ebf Split ramdisk processing in two so it can actually work. Ownerships
and permissions specified per rc.conf(5) now apply both to the md
device and to the mountpoint directory, after the mount has completed.
This has to be done in two steps, because chown is not available
until after /usr has been mounted, but the mdconfig and newfs steps
have to complete before fstab processing.
2004-04-06 18:26:43 +00:00
Max Khon
a3e34d6908 Add separate script for natd. This fixes race condition with "ipfw restart"
(when new natd is started before old natd died) and allows to manage natd
without touching ipfw.

natd should probably be killed with SIGKILL when stopping natd.
2004-04-05 16:29:45 +00:00
Max Khon
299b2a180b Allow this script to be used for Postfix:
- Use sendmail_foo variables after load_rc_config so that they actually work.
- Utilize sendmail_procname.
- Check sendmail_submit_enable instead of sendmail_enable when dealing
with mail submission MTA.
2004-04-05 16:26:22 +00:00
Max Khon
934c5da9c4 Document sendmail_pidfile variable.
Add sendmail_procname variable.
2004-04-05 16:22:14 +00:00
Max Laier
042d501cc7 Style:
- do not comment out entries in newsyslog.conf
 - use tabs to line up inetd.conf

Requested by:	bde
Approved by:	bms(mentor)
2004-04-03 17:52:29 +00:00
Max Laier
6cd9ebedd7 Add rc.d script to start pflogd and add rcvars etc. Also document vars in
rc.conf(5) and put a sample entry to newsyslog.conf

Reviewed by:	-current
Approved by:	bms(mentor)
2004-04-02 19:25:27 +00:00
Kirill Ponomarev
0a25d7a9ea - Use "/bin/hostname" explicitly instead of "hostname".
Approved by:	tobez
MFC after:	1 week
2004-04-02 12:18:40 +00:00
Kirill Ponomarev
c6e88cbf92 - Use absolute path for hostname(1)
Approved by:	green
2004-04-01 19:28:00 +00:00
Luigi Rizzo
99e9614386 Extensive documentation changes to the script, but only
comments and empty lines have been touched.

All of this should go in the diskless(8) manpage, now if we had
some kind of 'literate programming' tool to extract the comments
from the script and put them in a reasonable nroff format, it
would be a lot easier to keep code and docs in sync
2004-03-31 08:43:20 +00:00
Luigi Rizzo
220ee8be37 Minor changes mostly as discussed on the lists a few days ago:
+ SUBDIR.cpio.gz prevents files from SUBDIR/ to be copied when
   priming the memory filesystems. This restores the old behaviour
   and makes the copy process a lot more efficient

 + look for templates also in the list of directories supplied by
   bootp/dhcp via the T134 option aka kern.bootp_cookie

 + keep track of directories temporarily mounted with "remount"
   or "diskless_remount" commands and unmount them once we are done
   with them (at the end of this script).
2004-03-31 07:24:15 +00:00
Colin Percival
06dd89cd02 Synchronize with reality: nologin(8) is now in /usr/sbin
Reminded by:	trhodes
2004-03-30 19:19:02 +00:00