packages from a single port. LOOP_VAR is the name of the variable
and LOOP_OPTIONS is a space-separated list of values it should
take. When these are set, the target "package-loop" will go
through a clean and package loop for all the options. The
"package-loop" target is defined as "package" when LOOP_VAR is not
defined, so if you are in the business for building packages, you
should use "package-loop" all the time. (This target is added to
bsd.port.subdir.mk too.)
Also, the "describe" target prints out multiple lines so that all
options will go into the INDEX. (In other words, if you define
these variables, INDEX is going to look real silly if you don't
put ${${LOOP_VAR}} in PKGNAME.)
Seconded by: obrien ("ANYTHING")
(2) Turn off regexp support for LIB_DEPENDS. It is a fixed string of
the form <NAME>.<VER> now.
Tested by: several rounds of complete package builds
(3) Check checksum even if NO_EXTRACT is defined.
(4) Cosmetic fix for message in MANUAL_PACKAGE_BUILD case.
Alpha. This is a minor, but important distinction. Should be a no-op
to the install base. If OBJFORMAT is set elsewhere, things work
exactly as they did before.
name conversion. Use it for binary ports that come with its own private
shlib dirs, ports that install linux compatibility libraries (thus following
their naming conventions and not ours), etc.
Reviewed by: Martin Cracauer <cracauer@FreeBSD.ORG>
version number part (i.e., "<directory>/perl"). Use this to
substitute #! lines in your perl5 scripts.
Requested and reviewed by: ache
(2) Add new variable WRKDIRPREFIX (defaults to ""). The "work"
directories are now in ${WRKDIRPREFIX}${.CURDIR}/work by default.
You can have a read-only ports tree (modulo any broken ports that
write something to places other than ${WRKDIR}) by setting this to
a writable location.
Ports that set WRKDIR explicitly should append this to front so
they will work when the user has WRKDIRPREFIX set.
Reviewed by: Toshihiko Kodama <kodama@ayame.mfd.cs.fujitsu.co.jp>
since ports are not supposed to be broken during the process of
conversion to ELF -- please proceed with caution.)
(2) Support for checking file size before fetching. The essential
parts are commented out for now, so I won't lose the submission
while we discuss how to do it.
Submitted by: se (mostly)
(3) Don't run "fetch" twice. It was due to the change in checksum
target chaining. It used to be fetch -> checksum -> extract,
after 1.285 it was fetch -> checksum and checksum was also
explicitly called from extract. Fix it by not calling fetch from
checksum when it's invoked by extract.
Noticed by: pre-fetch target of lesstif being run twice
(4) Don't try to remove non-existent distfiles and patchfiles in
distclean.
Submitted by: anto@netscape.net
PR: 7988
Submitted by: "Eugene M. Kim" <gene@nttlabs.com>
(2) Check for exact version of perl5 in /usr/bin and exit with error
message if USE_PERL5 is defined and version does not match
${PERL_VERSION}.
(3) Note LIB_DEPENDS should not have any regular expressions. Remove
those in USE_XLIB and USE_QT.
Submitted by: hoek
(2) ELF support.
2a. Variable PORTOBJFORMAT specifies the object format of the system.
It is passed down to configure/make via CONFIGURE_ENV/MAKE_ENV,
and is given to generate-plist via PLIST_SUB.
2b. In PLIST, substitute lines that end with "/libFOO.so.X" with
"/libFOO.so.X.0". (This means PLISTs should only list ELF
libraries.)
Reviewed by: jb, jdp, hoek, jseger, steve
(3) Perl5-in-system support. Basically turns USE_PERL5 into a no-op
if there exists a "/usr/bin/perl5". Also fix prior breakage by
dima (${PREFIX} => ${LOCALBASE} in perl5 path).
Reviewed by: markm (sort of)
(4) Install requirement file as "+REQUIRE" so it will be executed
correctly by pkg_delete.
Reported by: Shigeyuki FUKUSHIMA <shige@kuis.kyoto-u.ac.jp>
(5) Do not disable checksum and makesum when NO_EXTRACT is set.
Pointed out by: hoek and kiri, among other people
src/lkm/Makefile.inc. This fixes broken builds of the syscons LKMs
when OBJFORMAT=elf. Removed src/lkm/Makefile.inc since it became
empty and is worse than useless.
the way, most of the things below are "Reviewed by: hoek" as well.)
The changes are (roughly in order of appearance):
(1) Revamp comments at beginning of file. Major rewrites. Reorder
them into more relevant sections. Make clear which ones are user
variables and not to be set in ports' Makefiles.
Reviewed by: hoek (well, he's the only one who sent any comments)
(2) Include ${.CURDIR}/Makefile.local if it exists. This is a local
configuration file (ala rc.conf.local and make.conf.local) so
please do not commit a file with this name to the repository.
Suggested by: dillon
(3) MANCOMPRESSED now takes three possible values: "yes", "no" and
"maybe". (It used to be a binary variable -- the old behavior is
now accomplished by "MANCOMPRESSED=yes". Ports that defined this
variable to other values have been corrected.)
"yes" means the manpages are installed compressed, "no" means they
are not, and "maybe" means the port already respects the value of
NOMANCOMPRESS. The default is "yes" for USE_IMAKE ports without
NO_INSTALL_MANPAGES, and "no" otherwise.
Add "compress-man" target and move manpage {,de}compression there.
Reviewed by: hoek etc. and a full build of the ports tree
(4) Add LIBDIR="${LIBDIR}" to MAKE_ENV. Makes easier to "fix" ports
for /usr/lib/aout mess.
Submitted by: ohashi@mickey.ai.kyutech.ac.jp (Takeshi Ohashi)
(5) Change ${TMPPLIST} from ${WRKDIR}/PLIST.mktmp to
${WRKDIR}/.PLIST.mktmp.
Suggested by: hoek
Strongly seconded by: steve
(6) Change a couple more relative pathnames to absolute ones.
Submitted by: hoek
(7) Move checksum into real-extract.
(8) Change way rules are chained. Instead of:
build: configure ${BUILD_COOKIE}
${BUILD_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
we now have
build: ${BUILD_COOKIE}
${BUILD_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} configure
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
Other than being more PC (pmake clean), this really speeds up
skipping ports already built. For instance, "make package" on a
fully packaged games subtree used to take 269 seconds on average,
now it's 45 seconds on average.
The flip side of this is that it will create more processes when
the targets actually chain, but when you're actually compiling
things, your make is creating half a bazzilion processes anyway so
I don't think it matters.
(9) ${TMPPLIST} is now a real dependency. Create "generate-plist"
target to generate ${TMPPLIST}. Make sure it's called when needed
(usually between do-install and post-install), and that the
required files exist.
(10) Change some messages so we can tell where "make index" failed.
(11) Check if LIB_DEPENDS really generated the required shared lib or
not.
Seconded by: "Brent J. Nordquist" <bjn@visi.com>
when certain .mk files include other .mk files. This will remove the
need for multiple include protection in some other makefiles around the
tree (and helps some elf conditionals).
means (change PREFIX to ${X11BASE}) and add a new variable USE_X11
which means "this port requires the X window system (actually the
library)". USE_X_PREFIX implies USE_X11. USE_X11 adds a
LIB_DEPENDS to libX11 with the x11/XFree86 port.
Reviewed by: the ports list, hoek in particular
(2) Remove NO_CONFIGURE and NO_PATCH, which never meant anything.
Yell if they are defined.
Reviewed by: the ports list
(3) Add new variable OSREL, which is automatically set to the
numeric OS version (e.g., 2.2.1, 3.0). It can be used to refer to
files in gcc installations, for instance.
(4) Finally remove EXEC_DEPENDS hack after all these years.
Submitted by: hoek
(5) Put quotes around some echo ${*_DEPENDS} statements so they won't
blow up when the variables include regular expressions like
"qt\\.1\\.\\\(33\\\|40\\\):${PORTSDIR}/x11/qt140".
recently added definitions from sys.mk to bsd.own.mk. Include the
src-relative bsd.own.mk in src/Makefile to pick up all new definitions.
Don't check that MACHINE_ARCH is defined in src/Makefile, since it is
(and should have been) guaranteed to be defined.
(mostly for includes) separate from direct dependencies (so that ${.ALLSRC}
can be used to find full paths to the sources for the direct dependencies
only). The `::' hack just forgot the indirect dependendencies. This
broke building doc/usd/13.viref with `make -jN' - the index got corrupted
by being built twice concurrently.
Cleaned up the ${DFILE} rule. There was a .else clause with dead code in
it following a .else clause (make accepts this bad syntax). ${.ALLSRC}
now works in the USE_SOELIMPP case. Some client Makefiles no longer need
the SRCDIR=${.OBJDIR} hack.
`make world' to avoid problems with picking up (new) target or (stale)
host shared libraries.
Don't honor -static in LDFLAGS for linking LKMs. LDFLAGS is not
actually for ld, but we use it anyway, and must prevent -static being
misinterpreted as -s.
Don't hide any of the link steps.
Move a.out libraries to /usr/lib/aout to make space for ELF libs.
Make rtld usr /usr/lib/aout as default library path.
Make ldconfig reject /usr/lib as an a.out library path.
Fix various Makefiles for LIBDIR!=/usr/lib breakage.
This will after a make world & reboot give a system that no
longer uses /usr/lib/*, infact one could remove all the old
libraries there, they are not used anymore.
We are getting close to an ELF make world, but I'll let this
all settle for a week or two...
the right solution or not, bsd.port.mk is broken unless bsd.locale.mk
is installed.
Note that if LOCALE is not defined, port-building explodes:
"/usr/share/mk/bsd.locale.mk", line 135: if-less elif
"/usr/share/mk/bsd.locale.mk", line 135: Need an operator
(For each .if testing LOCALE)
Notes:
- We no longer use -fgnu-runtime in bsd.lib.mk, since it is the default
and bsd.lib.mk is the wrong place to override it.
- Gnu C doesn't have a special compiler driver for Objective C like it
does for C++. The defaults are suitable for Gnu C. Use `OBJCLIBS='
in /etc/make.conf for POC.
is used in the dependency list for ${DEPENDFILE}. `make depend' was
broken for a few days. `make world' only uses `make depend' when
NOCLEAN is defined, so only a few people noticed the bug.
Submitted by: mostly by jmg
bsd.obj.mk instead of bsd.dep.mk for defining the _SUBDIR target
and a default tags target. Abuse bsd.obj.mk for defining default
cleandepend and depend targets.
that want a y.tab.h file. This want must be specified by putting y.tab.h
in SRCS (and defaulting to or putting -d in YFLAGS). This only works if
there is only one yacc parser, of course. One improvement: copy y.tab.c
to foo.c instead of renaming it, so that `#line...y.tab.c' statements in
it refer to an existing file.
Regress to not generating explicit rules for .l and .y sources containing
slashes. This case is unusual and hard to handle properly.
Don't generate an unused dependency when -d is not in YFLAGS.
sources. This will be used to fix `make -jN' races in many
Makefiles in /usr/src, and to simplify these and other Makefiles.
To get the fixes and simplifications, application Makefiles should
put the raw lex and yacc source names (foo.l and bar.y) in SRCS and
not put the names of any generated files in SRCS or CLEANFILES. A
few Makefiles already do this, although it didn't actually work before
(mkdep couldn't create complete dependencies because there is no
intermediate .c file for the .y.o and .l.o implicit rules).
Complications: if bar.y is in SRCS and -d is in YFLAGS, then bar.h
will be generated whether or not it is used, even if this clobbers a
real source file. This is so that bar.c can be generated using the
-j-safe and debugger-friendly -o option to YACC. There are smaller
warts for handling y.tab.h. y.tab.c and lex.yy.c are not supported.
`BINFORMAT=foo make checkdpadd' in /usr/src now reports only 2 false
negatives (in libss and init). (BINFORMAT=foo is to turn off better
handling of the a.out case.)
- the two `_EXTRADEPEND::' targets potentially clobbered each other for
`make -jN'. In practice, the output for the second target sometimes
disappeared.
- bogus dependencies were generated for static libraries.
headers in ${SRCS}, as in bsd.lmod.mk and bsd.prog.mk. This helps
`make [-j]' work when .depend doesn't exist. Even plain `make'
sometimes only worked because of magic ordering in ${SRCS}.
use the default without losing any (currently unused) features.
(CLEANDIRS is only used by for libgmp and libmp via bsd.lib.mk, and
only documented everywhere it is supported except of course where it
is actually used.)
I don't know what the hell I was thinking in: rev. 1.268
(2) Create ${PREFIX} before calling mtree if it doesn't exist. This
may not be the best solution, but pre-install is called after
mtree so there really isn't any way to fix this from the port
Makefiles and thus has to be done here.
Reviewed by: the lists
(2) Change MASTER_SITE_CTAN to reflect current reality.
Submitted by: fenner
(3) Add new port variable NO_LATEST_LINK. When this is set, the
"Latest" package symlink is not created. Use this for ports that
are betas when there is also a port for an older, more stable,
version.
(4) Don't be too stupid about "make deinstall".
Submitted by: fenner
in kernel Makefiles. Nothing in /usr/include is used (provided
relative paths for sys/* and <machine> can be found), so there is
no need for the -I/usr/include kludge as in kernel Makefiles.
them in the include path. This fixes recent breakage of the syscons
LKMs and general brokenness of the include paths (headers under
/usr/include were used in many cases).
it is built with this defined (which it isn't by default). This change
to sys.mk treats the absence of MACHINE_ARCH as i386 on the assumption
that it will be appropriately defined (as something else) on any other
architecture. When building FreeBSD's make with NetBSD tools, both
MACHINE and MACHINE_ARCH are correctly set (e.g. when bootstrapping
FreeBSD's make on NetBSD/mvme68k, MACHINE=mvme68k and
MACHINE_ARCH=m68k). This isn't really needed for the alpha which
has both defined as 'alpha', but I thought it was worth getting the
distinction between a MACHINE and a MACHINE_ARCH correct now.
Now, shouldn't PC98 have MACHINE=pc98 and MACHINE_ARCH=i386 ??!!
(1) Allow multiple checksums of same file.
Submitted by: hoek
(2) Add "deinstall" target as an alias to "pkg_delete $(make package-name)"
(well, something like that, see diff for details).
(3) Add new port variable USE_AUTOCONF. It appends BUILD_DEPENDS to
devel/autoconf and runs autoconf before configure.
Submitted by: ohashi@mickey.ai.kyutech.ac.jp (Takeshi Ohashi)
(4) Clarify USE_X11 and USE_IMAKE usage.
(5) Add new user-overridable variable MASTER_SITE_KDE.
Submitted by: vanilla
(6) Add support for "Latest" package links.
Idea by: Terry Lambert
(7) Try to catch obsolete tcl/tk installations that could cause problems.
Annoyed by various bogus commits by: you-know-who
don't remove a.out explicitly. a.out should only be generated for
libraries and is removed in the non-default rule in bsd.lib.mk.
Removed undocumented cleanfiles target. It was the same as the
default clean target except it didn't descend into subdirs. It was
different from special clean targets in other ways. This feature
hasn't been missed for more important targets.
Removed unused default cleandepend target. bsd.dep.mk has a better
version which is always used.
Use a better rule for checkdpadd in the BINFORMAT=aout case. This
mainly checks that ld -f is working correctly. The old rule is
still available via `make BINFORMAT=foo checkdpadd' and should be
used to check for regressions under 2.2 where ld -f is not available.
(as in bsd.prog.mk). Include it if `checkdpadd' is being made, so that
it can be checked until it goes away.
Don't clean files that we don't create.
Fixed style of empty test.
when there is no /usr/src/share/info if it were actually used.
Added comments to explain duplicated tex commands.
Use substitution in IFILENS to simplify some things.
Removed /g from many substitutions. It is bogus for anchored matches.
Don't echo nothing.
Don't add things that wouldn't be built with the current options to
CLEANFILES (except for some cases involving tex).
Reviewed by: wosch
we won't have double-slashes.
Add support for new port variable MANUAL_PACKAGE_BUILD. If this is
defined as well as the user variable PACKAGE_BUILDING, the port will
be ignored. This is used to mark ports that can be built normally
except on a machine that has a lot of conflicting ports (i.e., our
package building machine).
DESCR files when building README.html .
Don't use control characters in sed statement.
Problems reported by "Chris G. Demetriou" <cgd@pa.dec.com> in NetBSD PR
pkg/4341.
variables were lost when we removed -W, and 23 new ones including at
least one serious one have crept in for LINT.
Restored -Winline to CFLAGS. This gives only 3 old warnings and 1 new
for LINT.