- move init and fini code into separate functions (like it is done upstream)
- invoke fini code via shutdown_post_sync event hook
This should make zfs close its underlying devices during shutdown,
which may be important for their drivers.
MFC after: 20 days
All other places where a znode is allocated do not need z_vnode at all.
These are:
- zfs_create_share_dir
- zfs_create_fs
This chnage ensures two things:
- VN_LOCK_ASHARE is not erroneously called for VFIFO vnodes
- vn_lock is called on a fully constructed vnode with correct v_ops
The change also allows to make zfs_znode_cache_constructor a normal
kmem_cache constructor again (as it is in upstream).
This allows to avoid a problem where zfs_znode_cache_destructor
may be called on un-constructed znodes.
MFC after: 17 days
Unconditionally freeing a page is not good, especially if it is the page
that was wired by the caller. The checks are picked up from
kern_sendfile.
MFC after: 3 weeks
Quoting illumos issue #3836:
Currently zio_free() always puts the zio on a list for subsequent
processing by zio_free_sync(). This is only necessary for frees that
might need to issue reads (gang and dedup blocks).
By processing the majority of the frees as we encounter them, we reduce
the amount of time that the spa_sync() thread spends burning CPU and
not doing any i/o, thus increasing the overall write throughput of the
system.
Illumos ZFS issues:
3836 zio_free() can be processed immediately in the common case
MFC after: 1 week
I missed to register zfs_ioc_jail and zfs_ioc_unjail as legacy ioctl's
with the new zfs_ioctl_register_legacy() function.
These operations do not modify pools or datasets so there is no need to
log them to pool history.
Reported by: Alexander Leidinger <ale@FreeBSD.org> and others on current@
MFC after: 3 days
This could happen if a thread doing a page-in loses a ZFS range lock
race to a thread writing to the same range
This fixes "panic: vm_page_alloc: pindex already allocated" in
http://docs.FreeBSD.org/cgi/mid.cgi?1372165971.96049.42.camel
Submitted by: avg
MFC after: 1 week
function name of its corresponding DTrace probes. These descriptions may
contain whitespace, but probe names cannot, so just replace any whitespace
with underscores when creating probes.
MFC after: 1 week
Restore a previous behavior before r251646, where when destructing
ZFS snapshot, the ioctl would return ENOENT when it hit any of
them in the errlist (the new behavior was only return ENOENT when
all returns error).
Illumos ZFS issues:
3829 fix for 3740 changed behavior of zfs destroy/hold/release ioctl
MFC after: 1 week
ZFS event processing should work on R/O root filesystems
Illumos ZFS issues:
3749 zfs event processing should work on R/O root filesystems
MFC after: 2 weeks
* Illumos ZFS issue #3805 arc shouldn't cache freed blocks
Quote from the Illumos issue:
ZFS should proactively evict freed blocks from the cache.
Even though these freed blocks will never be used again, and thus
will eventually be evicted, this causes us to use memory
inefficiently for 2 reasons:
1. A block that is freed has no chance of being accessed again, but
will be kept in memory preferentially to a block that was accessed
before it (and is thus older) but has not been freed and thus has
at least some chance of being accessed again.
2. We partition the ARC into several buckets:
user data that has been accessed only once (MRU)
metadata that has been accessed only once (MRU)
user data that has been accessed more than once (MFU)
metadata that has been accessed more than once (MFU)
The user data vs metadata split is somewhat arbitrary, and the
primary control on how much memory is used to cache data vs metadata
is to simply try to keep the proportion the same as it has been in the
past (each bucket "evicts against" itself). The secondary control is
to evict data before evicting metadata.
Because of this bucketing, we may end up with one bucket mostly
containing freed blocks that are very old, while another bucket has
more recently accessed, still-allocated blocks. Data in the useful
bucket (with still-allocated blocks) may be evicted in preference to
data in the useless bucket (with old, freed blocks).
On dcenter, we saw that the MFU metadata bucket was 230MB, while the
MFU data bucket was 27GB and the MRU metadata bucket was 256GB.
However, the vast majority of data in the MRU metadata bucket (256GB)
was freed blocks, and thus useless. Meanwhile, the MFU metadata bucket
(230MB) was constantly evicting useful blocks that will be soon needed.
The problem of cache segmentation is a larger problem that needs more
investigation. However, if we stop caching freed blocks, it should
reduce the impact of this more fundamental issue.
MFC after: 2 weeks
* Illumos zfs issue #3137 L2ARC compression
Whether or not to compress buffers entering the L2ARC is
controlled by "compression" setting on the dataset, when
compression is not "off", L2ARC compression is enabled.
The compress method is always LZ4 for L2ARC when enabled
because it works best for the scenario.
MFC after: 2 weeks
dtrace_probe(). Arguments beyond these five must be obtained in an
architecture-specific way; this can be done through the getargval provider
method, and through dtrace_getarg() if getargval isn't overridden.
This change fixes two off-by-one bugs in the way these arguments are fetched
in FreeBSD's DTrace implementation. First, the SDT provider must set the
aframes parameter to 1 when creating a probe. The aframes parameter controls
the number of frames that dtrace_getarg() will step over in order to find
the frame containing the extra arguments. On FreeBSD, dtrace_getarg() is
called in SDT probe context via
dtrace_probe()->dtrace_dif_emulate()->dtrace_dif_variable->dtrace_getarg()
so aframes must be 3 since the arguments are in dtrace_probe()'s frame; it
was previously being called with a value of 2 instead. illumos uses a
different aframes value for SDT probes, but this is because illumos SDT
probes fire by triggering the #UD fault handler rather than calling
dtrace_probe() directly.
The second bug has to do with the way arguments are grabbed out
dtrace_probe()'s frame on amd64. The code currently jumps over the first
stack argument and retrieves the rest of them using a pointer into the
stack. This works on i386 because all of dtrace_probe()'s arguments will be
on the stack and the first argument is the probe ID, which should be
ignored. However, it is incorrect to ignore the first stack argument on
amd64, so we correct the pointer used to access the arguments.
MFC after: 2 weeks
seven arguments.
The original test uses Solaris' uadmin system call to trigger the test
probe; this change adds a sysctl to the dtrace_test module and gets the test
program to trigger the test probe via the sysctl handler.
The test is currently failing on amd64 because of some bugs in the way that
probe arguments beyond the first five are obtained - these bugs will be
fixed in a separate change.
USDT probes exits. This was previously done with a callout; however, it is
possible to sleep while holding the DTrace mutexes, so a panic will occur
on INVARIANTS kernels if the callout handler can't immediately acquire one
of these mutexes. This panic will be frequently triggered on systems where
a USDT-enabled program (perl, for instance) is often run.
This revision changes the fasttrap cleanup mechanism so that a dedicated
thread is used instead of a callout. The old behaviour is otherwise
preserved.
Reviewed by: rpaulo
MFC after: 1 month
users to guarantee that the output of DTrace scripts will be time-ordered.
This option is enabled by adding the line
#pragma D option temporal
to the beginning of a script, or by adding '-x temporal' to the arguments of
dtrace(1).
This change fixes a bug in the original port of the temporal option. This
bug was causing some assertions to fail, so they had been disabled; in this
revision the assertions are working properly and are enabled.
The DTrace version number has been bumped from 1.9.0 to 1.9.1 to reflect
the language change that's being introduced.
This change corresponds to part of illumos-gate commit e5803b76927480:
3021 option for time-ordered output from dtrace(1M)
Reviewed by: pfg
Obtained from: illumos
MFC after: 1 month
Merge vendor bugfix for a possible deadlock related to async destroy
and improve write performance by introducing a new lock protecting
tx_open_txg.
Illumos ZFS issues:
3642 dsl_scan_active() should not issue I/O to determine if async
destroying is active
3643 txg_delay should not hold the tc_lock
MFC after: 1 week
impossible to set quota and reservation on pools lower than version 22.
Problem has been reported and a solution discussed with vendor.
Illumos ZFS issues:
3739 cannot set zfs quota or reservation on pool version < 22
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reported by: Steve Wills <swills@FreeBSD.org>
MFC after: 3 days
The following change from illumos brought caused DTrace to
pause in an interactive environment:
3026 libdtrace should set LD_NOLAZYLOAD=1 to help the pid provider
This was not detected during testing because it doesn't
affect scripts.
We shouldn't be changing the environment, especially since the
LD_NOLAZYLOAD option doesn't apply to our (GNU) ld.
Unfortunately the change from upstream was made in such a way
that it is very difficult to separate this change from the
others so, at least for now, it's better to just revert
everything.
Reference:
https://www.illumos.org/issues/3026
Reported by: Navdeep Parhar and Mark Johnston
Merge changes from illumos:
3021 option for time-ordered output from dtrace(1M)
3022 DTrace: keys should not affect the sort order when sorting by value
3023 it should be possible to dereference dynamic variables
3024 D integer narrowing needs some work
3025 register leak in D code generation
3026 libdtrace should set LD_NOLAZYLOAD=1 to help the pid provider
This brings yet another feature implemented in upstream DTrace.
A complete description is available here:
http://dtrace.org/blogs/ahl/2012/07/28/my-new-dtrace-favorite/
This change bumps the DT_VERS_* number to 1.9.1 in
accordance to what is done in illumos.
This change was somewhat complicated because upstream is mixed many
changes in an individual commit and some of the tests don't really
apply to us.
There are also appear to be differences in timestamping with Solaris
so we had to workaround some assertions making sure no regression
happened.
Special thanks to Fabian Keil for changes and testing.
Illumos Revisions: 13758:23432da34147
Reference:
https://www.illumos.org/issues/3021https://www.illumos.org/issues/3022https://www.illumos.org/issues/3023https://www.illumos.org/issues/3024https://www.illumos.org/issues/3025https://www.illumos.org/issues/1694
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 months
Merge bugfixes accepted and integrated by vendor. Underlying problems
have been reported by us and fixed in r240942 and r249196.
Illumos ZFS issues:
3645 dmu_send_impl: possibilty of pool hold leak
3692 Panic on zfs receive of a recursive deduplicated stream
MFC after: 8 days
doesn't copyout in this case.
To solve this issue a new struct zfs_iocparm_t is introduced consisting of:
- zfs_ioctl_version (future backwards compatibility purposes)
- user space pointer to zfs_cmd_t (copyin and copyout)
- size of zfs_cmd_t (verification purposes)
The copyin and copyout of zfs_cmd_t is now done the illumos (vendor) way
what makes porting of new changes easier and ensures correct behavior if
returning an error.
MFC after: 10 days
Do not list read-only pools in zpool.cache
Reduce diff against vendor in unused vdev_disk.c
Illumos ZFS issues:
3639 zpool.cache should skip over readonly pools
3640 want automatic devid updates
MFC after: 1 week
Merge change from vendor to reduce diff only.
ZFS dtrace probes are not supported on FreeBSD yet.
Illumos ZFS issues:
3598 want to dtrace when errors are generated in zfs
MFC after: 3 weeks
Import vendor change to reduce diff, no effect on FreeBSD.
Illumos ZFS issues:
3517 importing pool with autoreplace=on and "hole" vdevs crashes syseventd
Prior to r248571 spa_open was always called with a bare pool name,
but now it is called with a dataset name instead (spa_lookup handles
that).
So, when a ZFS root is mounted spa_open is called with a name of a root
dataset, which can very well be different from the pool name.
But zvol_create_minors should be called with the pool name, because it
performs a recursive traversal of all datasets under the name to find
all those that are volumes.
MFC after: 7 days
Merge change from illumos:
1368 enablings on defunct providers prevent providers from unregistering
We try to address some underlying differences between the Solaris
and FreeBSD implementations: dtrace_attach() / dtrace_detach() are
currently unimplemented in FreeBSD but the new code from illumos
makes use of taskq so some adaptations were made to dtrace_open()
and dtrace_close() to handle them appropriately.
Illumos Revision: r13430:8e6add739e38
Reference:
https://www.illumos.org/issues/1368
Reviewed by: gnn
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 3 weeks
Merge change from illumos:
1694 Add type-aware print() action
This is a very nice feature implemented in upstream Dtrace.
A complete description is available here:
http://dtrace.org/blogs/eschrock/2011/10/26/your-mdb-fell-into-my-dtrace/
This change bumps the DT_VERS_* number to 1.9.0 in
accordance to what is done in illumos.
While here also include some minor cleanups to ease further merging
and appease clang with a fix by Fabian Keil.
Illumos Revisions: 13501:c3a7090dbc16
13483:f413e6c5d297
Reference:
https://www.illumos.org/issues/1560https://www.illumos.org/issues/1694
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 month
Merge changes from illumos:
1451 DTrace needs toupper()/tolower() subroutines
1457 lltostr() D subroutine should take an optional base
This change bumps the DT_VERS_* number to 1.8.1 in
accordance to what is done in illumos.
The test suite we currently include is outdated and
doesnt support some updates in tst.subr.d which had to
be left out for now.
Illumos Revisions: r13458 5e394d8db762
r13459 c3454574dd1a
Reference:
https://www.illumos.org/issues/1451https://www.illumos.org/issues/1457
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 month
Merge change from illumos:
1455 DTrace tracemem() should take an optional size argument
Our local enhancements to dt_print_bytes were equivalent to
those in illumos but we made it match the illumos version
to ease further code merges.
For now leave out tst.smallsize.d and tst.smallsize.d.out
since those don't seem to work cleanly on FreeBSD.
This change bumps the DT_VERS_* number to 1.7.1 in accordance
to what is done in illumos.
Illumos Revision: 13457:571b0355c2e3
Reference:
https://www.illumos.org/issues/1455
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 month
This particular scenario was easily reproduced using a NFS export. When the
first 'zfs unmount' occurred, it returned EBUSY via this path, while
vflush() had flushed references on the filesystem's root vnode, which in
turn caused its v_interlock to be destroyed. The next time 'zfs unmount'
was called, vflush() tried to obtain this lock, which caused this panic.
Since vflush() on FreeBSD is a definitive call, there is no need to check
vfsp->vfs_count after it completes. Simply #ifdef sun this check.
Submitted by: avg
Reviewed by: avg
Approved by: ken (mentor)
MFC after: 1 month
This issue would be silent most of the time, but if the requested memory
is a multiple of a page size, then accessing one element beyond the end
would lead to a kernel page fault.
Otherwise, the unlucky last type would just be inaccessible.
Reported by: glebius
Tested by: glebius
MFC after: 6 days
Previously TRIM processing was very bursty. This was made worse by the fact
that TRIM requests on SSD's are typically much slower than reads or writes.
This often resulted in stalls while large numbers of TRIM's where processed.
In addition due to the way the TRIM thread was only woken by writes, deletes
could stall in the queue for extensive periods of time.
This patch adds a number of controls to how often the TRIM thread for each
SPA processes its outstanding delete requests.
vfs.zfs.trim.timeout: Delay TRIMs by up to this many seconds
vfs.zfs.trim.txg_delay: Delay TRIMs by up to this many TXGs (reduced to 32)
vfs.zfs.vdev.trim_max_bytes: Maximum pending TRIM bytes for a vdev
vfs.zfs.vdev.trim_max_pending: Maximum pending TRIM segments for a vdev
vfs.zfs.trim.max_interval: Maximum interval between TRIM queue processing
(seconds)
Given the most common TRIM implementation is ATA TRIM the current defaults
are targeted at that.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
MFC after: 2 weeks
Currently, the trim module uses the same algorithm for data and cache
devices when deciding to issue TRIM requests, based on how far in the
past the TXG is.
Unfortunately, this is not ideal for cache devices, because the L2ARC
doesn't use the concept of TXGs at all. In fact, when using a pool for
reading only, the L2ARC is written but the TXG counter doesn't
increase, and so no new TRIM requests are issued to the cache device.
This patch fixes the issue by using time instead of the TXG number as
the criteria for trimming on cache devices. The basic delay principle
stays the same, but parameters are expressed in seconds instead of
TXGs. The new parameters are named trim_l2arc_limit and
trim_l2arc_batch, and both default to 30 second.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
Obtained from: 17122c31ac
MFC after: 2 weeks
This patch adds some improvements to the way the trim module considers
TXGs:
- Free ZIOs are registered with the TXG from the ZIO itself, not the
current SPA syncing TXG (which may be out of date);
- L2ARC are registered with a zero TXG number, as L2ARC has no concept
of TXGs;
- The TXG limit for issuing TRIMs is now computed from the last synced
TXG, not the currently syncing TXG. Indeed, under extremely unlikely
race conditions, there is a risk we could trim blocks which have been
freed in a TXG that has not finished syncing, resulting in potential
data corruption in case of a crash.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
Obtained from: 5b46ad40d9
MFC after: 2 weeks
The trim map inflight writes tree assumes non-conflicting writes, i.e.
that there will never be two simultaneous write I/Os to the same range
on the same vdev. This seemed like a sane assumption; however, in
actual testing, it appears that repair I/Os can very well conflict
with "normal" writes.
I'm not quite sure if these conflicting writes are supposed to happen
or not, but in the mean time, let's ignore repair writes for now. This
should be safe considering that, by definition, we never repair blocks
that are freed.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
Obtained from: Source: 6a3cebaf7c
This adds TRIM support to cache vdevs. When ARC buffers are removed
from the L2ARC in arc_hdr_destroy(), arc_release() or l2arc_evict(),
the size previously occupied by the buffer gets scheduled for TRIMming.
As always, actual TRIMs are only issued to the L2ARC after
txg_trim_limit.
Reviewed by: pjd (mentor)
Approved by: pjd (mentor)
Obtained from: 31aae37399
MFC after: 2 weeks
calls to toggle TDF_SBDRY rather than passing PBDRY to individual sleep
calls.
- Remove the stop_allowed parameters from cursig() and issignal().
issignal() checks TDF_SBDRY directly.
- Remove the PBDRY and SLEEPQ_STOP_ON_BDRY flags.
much of which is not necessary for PowerPC.
The FBT module can likely be factored into 3 separate files: common,
intel, and powerpc, rather than duplicating most of the code between
the x86 and PowerPC flavors.
All DTrace modules for PowerPC will be MFC'd together once Fasttrap is
completed.
- provide complete backwards compatibility (old utility, new kernel)
- add zfs_cmd_t compatibility mapping in both directions
- determine ioctl address in zfs_ioctl_compat.c
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
Introduce a new KPI that verifies if the page cache is empty for a
specified vm_object. This KPI does not make assumptions about the
locking in order to be used also for building assertions at init and
destroy time.
It is mostly used to hide implementation details of the page cache.
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: alc (vm_radix based version)
Tested by: flo, pho, jhb, davide
the pid provider on a kernel compiled with INVARIANTS.
sys/cddl/contrib/opensolaris/uts/intel/dtrace/fasttrap_isa.c:
In fasttrap_probe_pid(), attempts to write to the
address space of the thread that fired the probe
must be performed with the process of the thread
held. Use _PHOLD() to ensure this is the case.
In fasttrap_probe_pid(), use proc_write_regs() instead
of calling set_regs() directly. proc_write_regs()
performs invariant checks to verify the calling
environment of set_regs(). PROC_LOCK()/UNLOCK() around
the call to proc_write_regs() so that it's invariants
are satisfied.
Sponsored by: Spectra Logic Corporation
Reviewed by: gnn, rpaulo
MFC after: 1 week
necessary because we already use parenthesis in zfs_cv_init().
This fixes a long standing bug where there would be an extra ")" at the
end of the string. This extra parenthesis would show up in the WCHAN of
the process (top, stty status, etc.).
- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.
- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.
- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.
- The cap_getrights(2) syscall is renamed to cap_rights_get(2).
- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.
- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).
- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.
- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.
- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:
CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.
Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).
Added CAP_SYMLINKAT:
- Allow for symlinkat(2).
Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).
Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.
Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.
Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.
Removed CAP_MAPEXEC.
CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.
Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).
Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.
CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).
CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).
Added convinient defines:
#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE
#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)
Added defines for backward API compatibility:
#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)
Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib
Import a fix tighten assertion on SPA versions from vendor (Illumos).
Illumos ZFS issue:
3543 Feature flags causes assertion in spa.c to miss certain cases
MFC after: 2 weeks
Merge new read-only zfs properties from vendor (illumos)
Illumos ZFS issues:
3588 provide zfs properties for logical (uncompressed) space used and
referenced
References:
https://www.illumos.org/issues/3588
MFC after: 2 weeks
in r247265 (ZFS deadman thread). Both new utilities now support the old
kernel and new kernel properly detects old utilities.
For future backwards compatibility, the vfs.zfs.version.ioctl read-only
sysctl has been introduced. With this sysctl zfs utilities will be able
to detect the ioctl interface version of the currently loaded zfs module.
As a side effect, the zfs utilities between r247265 and this revision don't
support the old kernel module. If you are using HEAD newer or equal than
r247265, install the new kernel module (or whole kernel) first.
MFC after: 10 days
Merge the ZFS I/O deadman thread from vendor (illumos).
This feature panics the system on hanging ZFS I/O, helps debugging
and resumes failed service.
The panic behavior can be controlled with the loader-only tunables:
vfs.zfs.deadman_enabled (enable or disable panic on stalled ZFS I/O)
vfs.zfs.deadman_synctime (expiration time for stalled ZFS I/O)
By default, ZFS I/O deadman is enabled by default on amd64 and i386
excluding virtual guest machines.
Illumos ZFS issues:
3246 ZFS I/O deadman thread
References:
https://www.illumos.org/issues/3246
MFC after: 2 weeks
process that has crashed.
sys/cddl/contrib/opensolaris/uts/common/dtrace/fasttrap.c:
In fasttrap_pid_disable(), we cannot PHOLD the proc
structure for a process that no longer exists, but
we still have other, fasttrap specific, state that
must be cleaned up for probes that existed in the
dead process. Instead of returning early if the
process related to our probes isn't found,
conditionalize the locking and carry on with a NULL
proc pointer. The rest of the fasttrap code already
understands that a NULL proc is possible and does
the right things in this case.
Sponsored by: Spectra Logic Corporation
Reviewed by: rpaulo, gnn
MFC after: 1 week
Fixes several problems if working with read-only pools.
Changed code originaly introduced in onnv-gate 13061:bda0decf867b
Contains changes up to illumos-gate 13700:4bc0783f6064
PR: kern/175897
Suggested by: avg
MFC after: 2 weeks
Import vendor bugfixes regarding SA rounding, header size and layout.
This was already partially fixed by avg.
Illumos ZFS issues:
3512 rounding discrepancy in sa_find_sizes()
3513 mismatch between SA header size and layout
References:
https://www.illumos.org/issues/3512https://www.illumos.org/issues/3513
MFC after: 2 weeks
* Illumos zfs issue #3035 [1] LZ4 compression support in ZFS.
LZ4 is a new high-speed BSD-licensed compression algorithm created
by Yann Collet that delivers very high compression and decompression
performance compared to lzjb (>50% faster on compression, >80% faster
on decompression and around 3x faster on compression of incompressible
data), while giving better compression ratio [1].
This version of LZ4 corresponds to upstream's [2] revision 85.
Please note that for obvious reasons this is not backward read
compatible. This means once a pool have LZ4 compressed data, these
data can no longer be read by older ZFS implementations.
Local changes:
- On-stack hash table disabled and using kernel slab allocator
instead, at this time. This requires larger kernel thread stack
for zio workers. This may change in the future should we adjusted
the zio workers' thread stack size.
- likely and unlikely will be undefined if they are already defined,
this is required for i386 XEN build.
- Removed De Bruijn sequence based __builtin_ctz family of builtins
in favor of the latter. Both GCC and clang supports these builtins.
- Changed the way the LZ4 code detects endianness.
- Manual pages modifications to mention the feature based on Illumos
counterpart.
- Boot loader changes to make it support LZ4 decompression.
[1] https://www.illumos.org/issues/3035
[2] http://code.google.com/p/lz4/source/list
Obtained from: Illumos (13921:9d721847e469)
Tested on: FreeBSD/amd64
MFC after: 1 month
A special gfs vnode corresponds to that object.
A regular zfs vnode must not be returned.
This should be upstreamed.
Reported by: pluknet
Submitted by: rmacklem
Tested by: pluknet
MFC after: 10 days
Now they are split into two pairs: page_hold/page_unhold for mappedread
and page_busy/page_unbusy for update_pages.
For mappedread we simply hold a page that is to be used as a source if it
is resident and valid (and not busy). This is sufficient since we are
only doing page -> user buffer copying. There is no page <-> backing
storage I/O involved.
update_pages is now better split to properly handle the putpages case
(page -> arc) and the regular write case (arc -> page).
For the latter we use complete protocol of marking an object with
paging-in-progress and marking a page with io_start (busy count).
Also, in this case we remove the write bit from all page mappings and
clear dirty bits of the pages, the former is needed to ensure that the
latter does the right thing.
Additionally we update a page if it is cached instead of just freeing it
as was done before. This needs to be verified.
A minor detail: ZFS-backed pages should always be either fully valid
or fully invalid. Assert this and use simpler API that does not deal
with sub-page blocks.
Reviewed by: kib
MFC after: 26 days
- there is no such flag in Solaris and derivatives
- the flag was added in an unrelated change
- the flag is not used
The proper way to allocate zeroed out memory is to use kmem_zalloc.
MFC after: 3 days
This should allow the kernel linker to easily detect a situation
when the module is present both in a kernel and in a preloaded file
(zfs.ko).
Reviewed by: jhb
MFC after: 5 days
It seems that old ZFS versions (v15) completely omit "vdev_children"
property when there is a single child.
Reported by: jase
Tested by: jase
MFC after: 1 week
the underlying zap_count() to return no errors. However, it is possible
that the pool reaches to such a state where zap_count would return error,
leading to panics when a pool is imported.
This commit changes the ddt_zap_count to return error returned from
zap_count and handle the error appropriately. With this change, it's now
possible to let zpool rollback damaged transaction groups and import the
pool.
Obtained from: ZFS on Linux github (e8fd45a0f9)
MFC after: 1 month
- Use spinlock_enter()/spinlock_exit() to prevent a thread holding a
debug lock from being preempted to prevent other threads waiting
on that lock from starvation.
- Handle the possibility of CPU migration in between the fetch of curcpu
and the call to spinlock_enter() by saving curcpu in a local variable.
- Use memory barriers to prevent reordering of loads and stores of the
data protected by the lock outside of the critical section
- Eliminate false sharing of the locks by moving them into the structures
that they protect and aligning them to a cacheline boundary.
- Record the owning thread in the lock to make debugging future problems
easier.
Reviewed by: rpaulo (initial version)
MFC after: 2 weeks
initialisation to be enabled (1) / disabled (0) defaults to enabled.
This is useful for devices which have a slow trim speed and are either
new or have otherwise already been wiped e.g. secure erase.
PR: kern/173116
Submitted by: Steven Hartland
Approved by: pjd (mentor)
making range consolidation much more effective particularly for small
deletes.
This reduces memory used by the free map as well as reducing the number
of bio requests down to geom required to process all deletes.
In tests this achieved a factor of 10 reduction of trim ranges / geom
call downs.
While I'm here correct the description of zio_vdev_io_start.
PR: kern/173254
Submitted by: Steven Hartland
Approved by: pjd (mentor)
Also, make it explicit that V_XATTRDIR is not properly supported in gfs
code yet.
The bad code was plain incorrect: (a) it spoiled handling of v_usecount
reaching zero and (b) it leaked v_holdcnt.
The ugly code employs potentially unsafe locking tricks.
Ideally we should separate vnode lifecycle and gfs node lifecycle.
A gfs node should have its own reference count where its child nodes
should be accounted.
PR: kern/151111
Reviewed by: kib
MFC after: 13 days
Introduce a new dataset aclmode setting "restricted" to protect ACL's
being destroyed or corrupted by a drive-by chmod.
illumos-gate 13889:a67716f16746
3254 add support in zfs for aclmode=restricted
References:
https://www.illumos.org/issues/3254
MFC after: 2 weeks
Import the zio nop-write improvement from Illumos. To reduce I/O,
nop-write omits overwriting data if the checksum (cryptographically
secure) of new data matches the checksum of existing data.
It also saves space if snapshots are in use.
It currently works only on datasets with enabled compression, disabled
deduplication and sha256 checksums.
IllumOS 13887:196932ec9e6a and 13888:7204b3392a58
3236 zio nop-write
References:
https://www.illumos.org/issues/3236
MFC after: 2 weeks
* There is no need for the delayed destruction of znodes via taskqueue,
now that we do not need to fear recursion from getnewvnode into
zfs_inactive and zfs_freebsd_reclaim, thus making znode/vnode state
machine a bit simpler.
* More complete porting of zfs_inactive from Solaris VFS model to FreeBSD
vop_inactive and vop_reclaim model. All destructive actions are done
in zfs_freebsd_reclaim.
This allows to simplify zfs_zget logic.
* Allow zfs_zget to return a doomed vnode if the current thread already
has an exclusive lock on the vnode.
* Clean up Solaris-isms like bailing out of reclaim/inactive on certain
values of v_usecount (aka v_count) or directly messing with this counter.
* Do not clear z_vnode while znode is still accessible.
z_vnode should be cleared only after zfs_znode_dmu_fini.
Otherwise zfs_zget may get an effectively half-deconstructed znode.
This allows to simplify zfs_zget logic further.
The above changes fix at least two known/reported problems:
o An indefinite wait in the following code path:
vgone -> VOP_RECLAIM -> zfs_freebsd_reclaim -> vnode_destroy_vobject ->
put_pages -> zfs_write -> zil_commit -> zfs_zget
This happened because vgone marks a vnode as VI_DOOMED before calling
VOP_RECLAIM, but zfs_zget would not return a doomed vnode under any
circumstances.
The fix in this change is not complete as it won't fix a deadlock between
two threads doing VOP_RECLAIM where one thread is in zil_commit trying to
zfs_zget a znode/vnode being reclaimed by the other thread, which would be
blocked trying to enter zil_commit. This type of deadlock has not been
reported as of now.
o An indefinite wait in the unmount path caused by a znode "falling through
the cracks" in inactive+reclaim. This would happen if the znode is unlinked
while its vnode is still active.
To Do: pass locking flags parameter to zfs_zget, so that the zfs-vfs
glue code doesn't have to re-lock a vnode but could ask for proper locking
from the very start. This would also allow for the higher level code to
obtain a doomed vnode when it is expected/requested. Or to avoid blocking
when it is not allowed (see zil_commit example above).
ffs_vgetf seems like a good source of inspiration.
Tested by: Willem Jan Withagen <wjw@digiware.nl>
MFC after: 6 weeks
... otherwise zfs_getpages would mostly be called with one page at a time.
It is expected that ZFS VOP_BMAP is only called from vnode_pager_haspage.
Since ZFS files can have variable block sizes and also because we don't
really know if any given blocks are consecutive, we can not really report
any additional blocks behind or ahead of a given block. Since physical
block numbers do not make sense for ZFS, we do not do any real translation
and thus pass back blk = lblk. The net effect is that vnode_pager_haspage
knows that the block exists and that the pages backed by the block can be
accessed. vnode_pager_haspage may be wrong about the exact count of the
pages backed by the block, because of a variable block size, which
vnode_pager_haspage doesn't really know - it only knows max block size in
a filesystem. So pages from multiple blocks can be passed to zfs_getpages,
but that is expected and correctly handled.
vnode_pager should not call zfs_bmap for any other reason, because ZFS
implements VOP_PUTPAGES and thus vnode_pager_generic_getpages is not used.
vfs_cluster code vfs_bio code should not be called for ZFS, because ZFS does
not use buffer cache layer.
Also, ZFS does not use vn_bmap_seekhole, it has its prviate mechanism for
working with holes.
The above list should cover all the current calls to VOP_BMAP.
Reviewed by: kib
MFC after: 6 weeks
Illumos 13886:e3261d03efbf
3349 zpool upgrade -V bumps the on disk version number, but leaves
the in core version
References:
https://www.illumos.org/issues/3349
MFC after: 1 week
... because the latter makes some decision based on the version.
This is especially important for raidz vdevs.
This is similar to what spa_load does.
This is not an issue for upstream because they do not seem to support
using raidz as a root pool.
Reported by: Andrei Lavreniyuk <andy.lavr@gmail.com>
Tested by: Andrei Lavreniyuk <andy.lavr@gmail.com>
MFC after: 6 days
The call is a NOP, because pool version in spa_ubsync.ub_version is not
initialized and thus appears to be zero.
If the version is properly set then the call leads to a NULL pointer
dereference because the spa object is still under-constructed.
The same change was independently made in the upstream as a part of
a larger change (4445fffbbb1ea25fd0e9ea68b9380dd7a6709025).
MFC after: 6 days
if we fail to generate a proper root pool configuration based on disk
probing. Currently we can not properly generate the configuration for
multi-vdev pools. Make that explicit.
Reported by: madpilot, Bartosz Stec <bartosz.stec@it4pro.pl>
Tested by: madpilot, Bartosz Stec <bartosz.stec@it4pro.pl>
MFC after: 4 days
designator to select a process which is waited for. The system call
optionally returns siginfo_t which would be otherwise provided to
SIGCHLD handler, as well as extended structure accounting for child
and cumulative grandchild resource usage.
Allow to get the current rusage information for non-exited processes
as well, similar to Solaris.
The explicit WEXITED flag is required to wait for exited processes,
allowing for more fine-grained control of the events the waiter is
interested in.
Fix the handling of siginfo for WNOWAIT option for all wait*(2)
family, by not removing the queued signal state.
PR: standards/170346
Submitted by: "Jukka A. Ukkonen" <jau@iki.fi>
MFC after: 1 month
... before trying to destroy the zvol snapshots themselves.
PR: kern/173442
Reported by: Petri Helenius <petri@helenius.fi>,
mm
Obtained from: Brian Behlendorf <behlendorf1@llnl.gov>,
Illumos Bug #3170
Tested by: Petri Helenius <petri@helenius.fi>
MFC after: 10 days
Illumos r13840:97fd5cdf328a:
3145 single-copy arc
3212 ztest: race condition between vdev_online() and spa_vdev_remove()
Illumos r13849:3468a95b27cd:
3258 ztest's use of file descriptors is unstable
There is one known issue: Some probes will display an error message along the
lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different
binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect
problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
Otherwise we could fail with an incorrect error if e.g. parent
object id is removed too or we can even return a wrong vnode if
parent object has been already re-used.
Discussed with: pjd
Also see: http://article.gmane.org/gmane.os.freebsd.devel.file-systems/13863
MFC after: 26 days
vn_lock should do the right thing with respect to given vnode lock
flags. If a caller doesn't mind a doomed vnode, then zfs should deliver.
Reviewed by: kib
MFC after: 19 days
It turned out to be not that useful, because its default value may lead
to a problem when a root pool is present in zpool.cache, but its
on-disk status is 'exported'. This may happen if the pool was imported
in a different environment with -f flag and then exported.
MFC after: 12 days
POOL_STATE_SPARE and POOL_STATE_L2CACHE were not handled correctly
and thus the cache and spare disks would not be correctly probed.
Reported by: Michael Schmiedgen <schmiedgen@gmx.net>,
Matthew D. Fuller <fullermd@over-yonder.net>
Tested by: Michael Schmiedgen <schmiedgen@gmx.net>,
flo
MFC after: 5 days
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
... otherwise the current thread might be holding ARC locks and thus run
into a deadlock. This happens, for example, when a thread does memory
allocation in the ARC code and runs into KVA shortage.
Also, it really makes the most sense to wait in pageproc, so that the
results of ARC reclamation are seen before the page cache is acted upon.
In other cases where vm_lowmem is invoked, e.g. on KVA space shortage,
the callers perform multiple attempts (up to 8) and wait for rather
long intervals between them (up to 4 seconds), so ARC reclaim results
should become visible even without explicit waiting on the ARC thread.
Note that this is not a critical issue for typical ZFS usages where KVA
space should already be large enough. On amd64 systems setting KVA size
to twice the physical memory size is known to mitigate KVA fragmentation
issues in practice.
Side note: perhaps vm_lowmem 'how' parameter should be used to
differentiate between causes of the event.
Reported by: Nikolay Denev <ndenev@gmail.com>
MFC after: 19 days
getnewvnode_reserve helps to avoid "recursing" back into zfs code
via getnewvnode when that latter needs to reclaim some vnodes.
zfs code may hold a number of locks around getnewvnode and doesn't
expect any recursion to happen on those locks, because that never
happens in solaris.
I believe that this change also eleiminates a need for the delayed
znode destruction via the taskqueue.
Many thanks to kib for devising getnewvnode_reserve.
Reported by: flo
Tested by: bapt, kwm, swills
MFC after: 2 weeks
X-MFC after: r241556
... instead of deferring the action until first open.
Unlike upstream this has no benefit on FreeBSD.
We know that as soon as the provider is created it is going to be tasted
and thus opened. Initial mediasize of zero causes tasting failure
and subsequent retasting because of the size change.
MFC after: 14 days
This should allow to mount a dataset as a root filesystem even if
it belongs to a pool that is not described in zpool.cache.
This adds some overhead to the boot process though.
If the root filesystem's pool is found in zpool.cache, the by default
its cached configuration will be used for import.
vfs.zfs.rootpool.prefer_cached_config could be set to zero to force
the config to be retasted.
Discussed with: gibbs, pjd, des
MFC after: 25 days
doesn't exist on a dataset we are starting from. For example if we
have the following configuration:
tank
tank/foo
tank/foo@snap
tank/bar
tank/bar@snap
We can execute:
# zfs destroy -t tank@snap
eventhough tank@snap doesn't exit.
Unfortunately it is not possible to do the same with recursive rename:
# zfs rename -r tank@snap tank@pans
cannot open 'tank@snap': dataset does not exist
...until now. This change allows to recursively rename snapshots even if
snapshot doesn't exist on the starting dataset.
Sponsored by: rsync.net
MFC after: 2 weeks
The code builds a map of regions that were freed. On every write the
code consults the map and eventually removes ranges that were freed
before, but are now overwritten.
Freed blocks are not TRIMed immediately. There is a tunable that defines
how many txg we should wait with TRIMming freed blocks (64 by default).
There is a low priority thread that TRIMs ranges when the time comes.
During TRIM we keep in-flight ranges on a list to detect colliding
writes - we have to delay writes that collide with in-flight TRIMs in
case something will be reordered and write will reached the disk before
the TRIM. We don't have to do the same for in-flight writes, as
colliding writes just remove ranges to TRIM.
Sponsored by: multiplay.co.uk
This work includes some important fixes and some improvements obtained
from the zfsonlinux project, including TRIMming entire vdevs on pool
create/add/attach and on pool import for spare and cache vdevs.
Obtained from: zfsonlinux
Submitted by: Etienne Dechamps <etienne.dechamps@ovh.net>
Do this by checking if spa_namespace_lock is already held and not taking
it again in that case.
Add a comment explaining why that is done and why it is safe.
Reviewed by: pjd
MFC after: 24 days
Since all attribute values start at 8-byte aligned boundary, we would
previously incorrectly calculate dn_bonuslen if any attribute but the
last had a variable-length value with length not multiple of 8.
Reported by: Nicolas Rachinsky <fbsd-mas-0@ml.turing-complete.org>
Tested by: Nicolas Rachinsky <fbsd-mas-0@ml.turing-complete.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> (for upstream)
MFC after: 2 weeks
- skip length_idx index for a replaced variable-sized attribute
- skip length_idx index for a removed variable-sized attribute
- also re-arranged code to make sure that length_idx is always
incremented for variable-sized attributes
- additionally add an assertion that the number of actually produced
attributes is the same as the expected number of resulting
attributes
In cooperation with: Matthew Ahrens <mahrens@delphix.com>
Tested by: Trent Nelson <trent@snakebite.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> (for upstream)
To do: get this upstreamed
MFC after: 2 weeks
When calling a revoke(2) on a dtrace device, dtrace_close() could be
called, even if threads are still stuck in the device. Defer the actual
deallocation of datastructures to the cdevpriv destructor.
While there, remove the unneeded D_TRACKCLOSE and D_NEEDMINOR flags. For
the helper device, we never need it. For the regular dtrace devices, we
only need these flags on FreeBSD pre-8.
MFC after: 1 month
1) It is not useful to call "devfs_clear_cdevpriv()" from
"d_close" callbacks, hence for example read, write, ioctl and
so on might be sleeping at the time of "d_close" being called
and then then freed private data can still be accessed.
Examples: dtrace, linux_compat, ksyms (all fixed by this patch)
2) In sys/dev/drm* there are some cases in which memory will
be freed twice, if open fails, first by code in the open
routine, secondly by the cdevpriv destructor. Move registration
of the cdevpriv to the end of the drm open routines.
3) devfs_clear_cdevpriv() is not called if the "d_open" callback
registered cdevpriv data and the "d_open" callback function
returned an error. Fix this.
Discussed with: phk
MFC after: 2 weeks
Update DTrace disassembler accordingly. The code to treat the prefixes
as null prefixes was already in place.
Although in practice compilers seem to generate only cs-prefix for use
in long NOPs, the same treatment is applied to all of cs, ds, es, ss for
consistency.
Reported by: emaste
Tested by: emaste
Obtained from: Illumos commit 13442:4adbe6de60c8 (+ local changes)
MFC after: 5 days
According to the AMD manual the whole range from 0x09 to 0x1f are NOPs.
Intel manual mentions only 0x1f. Use only Intel one for now, it seems
to be the one actually generated by compilers.
Use gdb mnemonic for the operation: "nopw".
[1] AMD64 Architecture Programmer's Manual
Volume 3: General-Purpose and System Instructions
[2] Software Optimization Guide for AMD Family 10h Processors
[3] Intel(R) 64 and IA-32 Architectures Software Developer’s Manual
Volume 2 (2A, 2B & 2C): Instruction Set Reference, A-Z
Tested by: Fabian Keil <freebsd-listen@fabiankeil.de> (earlier version)
MFC after: 3 days
Bryan Cantrill implemented the equivalent of semi-log graph
paper for Dtrace so llquantize will use one logarithmic and
one linear scale.
Special thanks to Mark Peek for providing fix to an
assertion and to Fabian Keill for testing the port.
Illumos Revision: 13355:15b74a2a9a9d
Reference:
https://www.illumos/issues/905
Obtained from: Illumos
Tested by: Fabian Keill, mp
MFC after: 4 days
differentiate between an incremental and full stream.
Be sure not to generate guid equal to 0.
Reported by: someone who saw 0 being generated as 64bit random guid
MFC after: 3 days
The skew calculation here is exactly backwards. We were able to repro
it on a multi-package ESX server running a FreeBSD VM, where the TSCs
can be pretty evil.
MFC after: 1 week
Submitted by: Jeff Ford <jeffrey.ford2@isilon.com>
Reviewed by: avg, gnn
1948 zpool list should show more detailed pool information
Display per-vdev information with "zpool list -v".
The added expandsize property has currently no value on FreeBSD.
This changeset allows adding expansion support to individual vdevs
in the future.
References:
https://www.illumos.org/issues/1948
Obtained from: illumos (issue #1948)
MFC after: 2 weeks
vn_rlimit_fsize takes uio->uio_offset and uio->uio_resid into account
when determining whether given write would exceed RLIMIT_FSIZE.
When APPEND flag is specified, ZFS updates uio->uio_offset to point to the
end of file.
But this happens after a call to vn_rlimit_fsize, so vn_rlimit_fsize check
can be rendered ineffective by thread that opens some file with O_APPEND
and lseeks below RLIMIT_FSIZE before calling write.
Submitted by: Mateusz Guzik <mjguzik at gmail dot com>
MFC after: 2 weeks
2703 add mechanism to report ZFS send progress
If the zfs send command is used with the -v flag, the amount of bytes
transmitted is reported in per second updates.
References:
https://www.illumos.org/issues/2703
Obtained from: illumos (issue #2703)
MFC after: 2 weeks
to follow the example of OpenSolaris and its descendants, which implemented
cpu as an inline that took a value out of curthread. At certain points in
the FreeBSD scheduler curthread->td_oncpu will no longer be valid (in
particukar, just before the thread gets descheduled) so instead I have
implemented this as its own built-in variable.
Sponsored by: Sandvine Inc.
MFC after: 1 week
accesses of the cache member of vm_object objects.
- Use novel vm_page_is_cached() for checks outside of the vm subsystem.
Reviewed by: alc
MFC after: 2 weeks
X-MFC: r234039
On FreeBSD the direct ioctl argument is automatically copied in/out
as necesary by the kernel ioctl entry point.
PR: kern/164445
Submitted by: Luis Garces-Erice <lge@ieee.org>
Tested by: Attila Nagy <bra@fsn.hu>
MFC after: 5 days
loaded and unloaded, also have sdt.ko register callbacks with kern_sdt.c
that will be called when a newly loaded KLD module adds more probes or
a module with probes is unloaded.
This fixes two issues: first, if a module with SDT probes was loaded after
sdt.ko was loaded, those new probes would not be available in DTrace.
Second, if a module with SDT probes was unloaded while sdt.ko was loaded,
the kernel would panic the next time DTrace had cause to try and do
anything with the no-longer-existent probes.
This makes it possible to create SDT probes in KLD modules, although there
are still two caveats: first, any SDT probes in a KLD module must be part
of a DTrace provider that is defined in that module. At present DTrace
only destroys probes when the provider is destroyed, so you can still
panic the system if a KLD module creates new probes in a provider from a
different module(including the kernel) and then unload the the first module.
Second, the system will panic if you unload a module containing SDT probes
while there is an active D script that has enabled those probes.
MFC after: 1 month
- header and stub .c file for fasttrap module. It's not supported on
MIPS yet, but there is no way to disable support completely
- Do as amd64 trying to limit allocated memory
allow.mount.zfs:
allow mounting the zfs filesystem inside a jail
This way the permssions for mounting all current VFCF_JAIL filesystems
inside a jail are controlled wia allow.mount.* jail parameters.
Update sysctl descriptions.
Update jail(8) and zfs(8) manpages.
TODO: document the connection of allow.mount.* and VFCF_JAIL for kernel
developers
MFC after: 10 days
Add the sysctl debug.iosize_max_clamp, enabled by default. Setting the
sysctl to zero allows to perform the SSIZE_MAX-sized i/o requests from
the usermode.
Discussed with: bde, das (previous versions)
MFC after: 1 month
excluding other allocations including UMA now entails the addition of
a single flag to kmem_alloc or uma zone create
Reviewed by: alc, avg
MFC after: 2 weeks
names and wants to sort them by name, ie. when executes:
# zfs list -t snapshot -o name -s name
Because only name is needed we don't have to read all snapshot properties.
Below you can find how long does it take to list 34509 snapshots from a single
disk pool before and after this change with cold and warm cache:
before:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 525s
warm cache: 218s
after:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 1.7s
warm cache: 1.1s
MFC after: 1 week
the allocated memory before calling mtx_init(9) on mtx pointing to it.
Otherwize, random contents of uninitialized memory might occasionally
trigger the assertion.
Reported by: Pavel Polyakov <bsd kobyla org>
Reviewed by: pjd
MFC after: 1 week
the number of links against LINK_MAX (which is INT16_MAX), not against
UINT32_MAX. Otherwise, the constant would implicitly be converted to
-1.
Reviewed by: pjd
MFC after: 1 week
(ss == NULL) on pool import. I had such a panic recently. With current version
of ZFS it is still possible to import the pool in readonly mode and backup
all the data, but in case it is impossible for some reason add tunable
vfs.zfs.space_map_last_hope, which when set to '1' will tell ZFS to remove
colliding range and retry. This seems to have worked for me, but I consider
it highly risky to use.
MFC after: 1 week
lock_success/lock_failure, introduced in r228424, by directly skipping
in dtrace_probe.
This mainly helps in avoiding namespace pollution and thus lockstat.h
dependency by systm.h.
As an added bonus, this also helps in MFC case.
Reviewed by: avg
MFC after: 3 months (or never)
X-MFC: r228424
