Commit Graph

4297 Commits

Author SHA1 Message Date
Mike Smith
0e1fcae272 Support Intel EtherExpress Pro 10+
PR:		kern/4335
Reviewed by:	Stephen Roznowski (sjr@home.net)
1997-09-12 08:30:57 +00:00
Joerg Wunsch
e0b78e19f2 Do not ever try to coredump adapter memory regions.
PR:		4486
Submitted by:	tegge@idi.ntnu.no (Tor Egge)

Implement a function is_adapter_memory() in order to determine what
should nto be dumped at all.  Currently, only populated with the ``ISA
memory hole''.  Adapter regions of other busses should be added.
1997-09-10 12:31:40 +00:00
Peter Wemm
ffdd472de7 Allow a compile-time override of the ipfw deny rule. For a 'firewall'
you don't want this (and the documentation explains why), but if you
use ipfw as an as-needed casual filter as needed which normally runs as
'allow all' then having the kernel and /sbin/ipfw get out of sync is a
*MAJOR* pain in the behind.

PR: 4141
Submitted by: Heikki Suonsivu <hsu@mail.clinet.fi>
1997-09-10 03:07:14 +00:00
David Greenman
dab47f02cf Change the address for the low end of what we permit from c0000 down
to a0000 so that people can put their cards in the middle of their
video memory if they want. :-)
1997-09-10 00:17:39 +00:00
John-Mark Gurney
7806e33667 add neccessary calls to autoconf for pnp,
also teach userconfig about the new pnp commands, for usage see pnp(4)
1997-09-09 12:48:59 +00:00
John-Mark Gurney
53a7a570be add pnp device entries... 1997-09-09 12:40:54 +00:00
John-Mark Gurney
2daf730067 add the plug-and-play code into current...
This code has been submitted by Luigi Rizzo <luigi@labinfo.iet.unipi.it>,
based on work done by Sujal Patel.

This currnetly doesn't provide the ability to register the port address
of PnP cards assigned a PnP driver.  As there aren't any PnP capible
drivers yet, this isn't much of a problem.

The code allows you, through USERCONFIG, configure what the cards port
bases, irqs, and dma's are like.  Currently there isn't support to view
what cards are in the sytem.

It successfully configures my PnP Internal Modem and sio then sees the
card as a normal isa device.

man page will be committed shortly.

Approved-by: jkh
Submitted-by: Luigi Rizzo
1997-09-09 12:31:58 +00:00
Mark Murray
51c63b7d63 Amancio's latest in the Brooktree driver.
This fixes the european frequency set, separates this further from the
Meteor driver and fixes bugs.
1997-09-09 06:32:32 +00:00
David Greenman
7dfe7bef0b Added a check for the ISA memory address range being valid. Fixes PR#835. 1997-09-08 20:00:21 +00:00
David Greenman
6514ad5540 Turn on the 0WS option for 16bit cards. Newer machines insert enough
delay that without this the performance is unacceptable. The 83C690,
83C790, and 83C795 chips which this affects are all designed to work
with 0 waitstates in 16bit mode.
Also cleaned up the toggling of 16bit access mode that occurs during
normal operation; the previous code may not have done the right thing
in all cases.
1997-09-08 10:27:09 +00:00
Peter Wemm
421f9ee1ef Change an assemble-time divide into a shift. Under binutils-2.8 gas in elf
mode, the slash is a comment leader, while under non-elf it is a divide
symbol (what a concept! :-).  Theoretically, #APP/#NO_APP can change this
but that doesn't seem to mesh too well with macros and line continuation.
1997-09-08 06:40:58 +00:00
Peter Wemm
929ea59a92 Add missing redirection for _inside_intr -> inside_intr 1997-09-08 00:25:05 +00:00
Steve Passe
af184246e1 DISABLE LEVEL_3 lock pushdown, somethings seems to have broken! 1997-09-07 23:06:15 +00:00
Steve Passe
20233f27f4 General cleanup of the lock pushdown code. They are grouped and enabled
from machine/smptests.h:

#define PUSHDOWN_LEVEL_1
#define PUSHDOWN_LEVEL_2
#define PUSHDOWN_LEVEL_3
#define PUSHDOWN_LEVEL_4_NOT
1997-09-07 22:04:09 +00:00
Bruce Evans
7128e3fc0a Removed more vestiges of config-time swap configuration. 1997-09-07 12:56:46 +00:00
Bruce Evans
da8ac9bcd1 Include kernel.h instead of declaring "extern int hz". 1997-09-07 04:21:25 +00:00
John Dyson
5b05023a50 Fix an intermittent problem during SMP code operation. Not all of the
idle page table directories for all of the processors was being updated
during kernel grow operations.  The problem appears to be gone now.
1997-09-07 01:15:13 +00:00
Wolfgang Helbig
59c98c07d3 Enable A law encoding.
Enable A law encoding.
1997-09-06 17:39:06 +00:00
Wolfgang Helbig
312ae708cd Enable A law encoding. 1997-09-06 17:38:29 +00:00
Peter Wemm
bb36094c06 Argh, what was I thinking?? Don't (yet) halt the CPU in the idle loop
while waiting for an interrupt (rather than spinning on the runqueue status
bits), since the other cpu can put stuff in there and the sleeping cpu may
not get an interrupt for a while.  When we have a reschedule IPI, this can
come back.

Pointed out by: fsmp
1997-09-05 17:54:07 +00:00
Peter Wemm
279a69322c Cosmetic adjustment for the trap/double fault/panic cpu id listing.
It now prints the apic id in hex rather than decimal.
1997-09-05 08:54:55 +00:00
Peter Wemm
c9c5eae40a Add redirection for new _clock_lock symbol 1997-09-05 08:47:24 +00:00
Kazutaka YOKOTA
297976f79f Add a new compile option SC_HISTORY_SIZE for syscons. 1997-09-04 23:03:11 +00:00
Kazutaka YOKOTA
9d6218d088 Add a new compile option SC_HISTORY_SIZE to specify the history buffer
size in terms of lines (instead of bytes).  When changing video mode
in ioctl SW_XXX commands, syscons checks scp->history_size and
allocate a history buffer at least as large as the new screen size.
(This was unnecessary before, because HISTORY_SIZE was as large as 100
lines and this is bigger than the maximum screen size: 60 lines).
Similar adjustment is done in ioctl CONS_HISTORY command too.

PR: kern/4169
Reviewed by: sos
1997-09-04 23:01:06 +00:00
Søren Schmidt
1f7727a963 Upgrade of EIDE DMA support, Johns comments:
* lots of fixes to error handling-- mostly works now
* improve DMA timing config for Triton chipsets-- PIIX4 and UDMA drive
  still untested
* generally improve DMA config in many ways-- mostly cleanup
* clean up boot-time messages
* rewrite PRD generation algorithm
* first wd timeout is now longer, to handle drive spinup

Submitted by: John Hood <cgull@smoke.marlboro.vt.us>
1997-09-04 18:49:53 +00:00
David Greenman
86fe35b5c6 Cosmetic change to last commit: speculative_mtest -> speculative_mprobe. 1997-09-04 15:23:33 +00:00
David Greenman
e91dd67ed8 Changed the memory sizing code so that if the following conditions
are met:

1) The BIOS indicates that there is exactly 64MB of RAM, and
2) The memory size isn't specified with the MAXMEM option or
   the npx0 msize hack,

   ...then do a speculative memory probe beyond the 64MB's until the
first bad page is encountered. This is an admitted hack, but should
nonetheless deal with detecting the correct amount of memory in nearly
all of the modern systems with >64MB of RAM.
Also made a change that will cause the list of detected memory chunks
to be printed if bootverbose is set.
1997-09-04 15:14:48 +00:00
KATO Takenori
cca7e880b9 Always defines macros for PC-98 display. 1997-09-04 09:05:17 +00:00
Jordan K. Hubbard
168568257a Correct ancient spelling bogon. 1997-09-04 09:01:07 +00:00
Søren Schmidt
44b9771a14 1) Changed the volume to be a little louder.
2) Added a non_blocking flag to the write routine.
 3) Added a 3rd buffer (actually a ring buffer would be better)

Submitted by: Jim Lowe <james@miller.cs.uwm.edu>
1997-09-03 19:08:05 +00:00
Justin T. Gibbs
c66dbc92d4 Make the aic7xxx sequencer assembler compile in the kernel's object
directory.  Rename (via repository copy) some files so that the potential
for future conflicts is minimized.

PR: conf/4363
1997-09-03 03:44:58 +00:00
Bruce Evans
ef4ce80f95 Cleaned up revs 1.36-1.40 (mainly disordered declarations, non-bogus
indentation (it is supposed to be bogus to match sio.c), and long lines).
1997-09-03 01:50:24 +00:00
Bruce Evans
e4ba6a82b0 Removed unused #includes. 1997-09-02 20:06:59 +00:00
Steve Passe
010e669615 Removed the "globl" nature of the vec array. This was left over from the
time when icu.s was common between UP and SMP.  It is not necessary for UP
and thus can be removed from icu_ipl.s.
1997-09-02 19:40:13 +00:00
Bruce Evans
4d1d4912ae Added used #include - don't depend on <sys/mbuf.h> including
<sys/malloc.h> (unless we only use the bogusly shared M*WAIT flags).
1997-09-02 01:19:47 +00:00
Steve Passe
1de995bb1f General cleanup of the sub-system locking macros.
Eliminated the RECURSIVE_MPINTRLOCK.
clock.c and microtime use clock_lock.
sio.c and cy.c use com_lock.

Suggestions by:	Bruce Evans <bde@zeta.org.au>
1997-09-01 07:45:37 +00:00
Steve Passe
7245dff0f1 Cleanup. 1997-09-01 07:31:54 +00:00
Bruce Evans
1c86c3f605 Removed unused #includes (<machine/cpu.h> now gives more pollution). 1997-09-01 02:12:39 +00:00
Bruce Evans
0ec3217356 Removed unused #includes. 1997-09-01 02:08:42 +00:00
Bruce Evans
6f7319427a Fixed absolute pathnames in #includes. 1997-09-01 01:57:27 +00:00
Bruce Evans
e28b96049b Move closer to supporting VM86 under SMP.
LINT now compiles but doesn't link.  Other link-time breakage for LINT
is now visible (SMP is incompatible with SIMPLELOCK_DEBUG).
Submitted by:	jlemon
1997-09-01 01:54:52 +00:00
Bruce Evans
6856ba1262 Removed unused #includes. 1997-09-01 01:12:53 +00:00
Bruce Evans
6d58e6cbc4 Fixed options SHOW_BUSYBUFS and PANIC_REBOOT_WAIT_TIME which were broken
by incomplete cutting and pasting from machdep.c to kern_shutdown.c.

PR:		3953
1997-08-31 23:08:38 +00:00
Bruce Evans
f3086365a3 Put I*86_CPU options in opt_global.h and don't #include "opt_cpu.h"
centrally.
1997-08-31 22:43:46 +00:00
Poul-Henning Kamp
e6dcdf4dd1 Remove pbzero(), things we load zero their own bss.
Make VESA_SUPPORT default
1997-08-31 06:11:26 +00:00
Steve Passe
2645264a72 Debug version of simple_lock. This will store the CPU id of the
holding CPU along with the lock.  When a CPU fails to get the lock
it compares its own id to the holder id.  If they are the same it
panic()s, as simple locks are binary, and this would cause a deadlock.

Controlled by smptests.h: SL_DEBUG, ON by default.

Some minor cleanup.
1997-08-31 03:17:48 +00:00
Steve Passe
adc91a77c1 Created a private simple_lock to control accesses to com data structs
and hardware.
There is now another simple_lock around clock data/hardware accesses in
clock.c and microtime.s.  It is my belief that this is the only area
sio/cy might stumble into during an unblocked INTerrupt.  Thus I separated
the sio/cy code from the generic disable_intr()/enable_intr() routines.

Controlled by smptests.h: USE_COMLOCK, ON by default.
1997-08-31 03:17:18 +00:00
Steve Passe
c10b70dbdc Added clock_lock protection to microtime. 1997-08-30 19:02:56 +00:00
Peter Wemm
bf9380893a Define some machine characteristics using symbol naming on conventions
in place in the other BSD's.
1997-08-30 18:59:48 +00:00
Peter Wemm
88d2e69daa Update to include recently added names that are shared between the C and
asm parts of the kernel.  This is to re-enable ELF compile support.
1997-08-30 11:20:02 +00:00