This was found while reworking the device tree nodes for dtsec to match the
Linux device tree. Instead of waiting and expecting later code to call
dpaa_portal_map_registers(), do the equivalent immediately upon mapping.
Otherwise, it's possible to access the pages before that function is called, and
hang the CPU.
This unifies handling of core, chip, and board-level device
matching, and adds support for matching device drivers
against the bus attach type (e.g. SoC vs WiFi adapter).
Core-level quirks on Broadcom's chipsets generally are specific
to some combination of chip model, core revision, chip
package (e.g. 12x9 SMT package), SROM revision, etc.
Unifying the match APIs for all three attribute types (core, chip,
board/srom) allows defining a single device quirk table that
matches across all of those attributes.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6515
than sc->areq. This is a bounds check to ensure we're not just cramming
arbitrarily sized nonsense into the driver and overflowing the heap.
PR: 209545
Submitted by: cturt@hardenedbsd.org
MFC after: 2 weeks
Option EFSYS_OPT_ALLOW_UNCONFIGURED_NIC disables check that the adapter
MAC address is not a local address (beginning 02).
Submitted by: Laurence Evans <levans at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6508
And
- Move message and event flags to vmbus_softc per-cpu data.
- Get rid of hv_setup_arg, which serves no purpose now.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6502
* convert phy_getinfo() to take a "gmode" flag, rather than the siba
TGSHIGH flags and then check for 2GHz. This should ensure that
gmode is set correctly even on DUALPHY NICs.
* move the siba_powerup() call and the TGSHIGH decoding into a
call to bwn_is_bus_siba(), and return an error if it's called
on anything else. We don't yet do anything else, but when we do..
Tested:
* BCM4322, 11a STA
This is all for the bhnd(4) work in progress. It's enough to probe/attach
all the bhnd internals, but we're missing OTP support and some cleanup
code. And, well, all the rest of the bhnd(4) migration.
So no, this won't give you BCM43225 support. Sorry!
This patchset adds support to bhnd_chipc for sharing SYS_RES_MEMORY
resources with its children, allowing us to hang devices off of
bhnd_chipc that rely on access to a subset of the device register space
that bhnd_chipc itself must also allocate.
We could avoid most of this heavy lifting if RF_SHAREABLE+SYS_RES_MEMORY
wasn't limited to use with allocations at the same size/offset.
As a work-around, I implemented something similar to vga_pci.c, which
implements similar reference counting of of PCI BAR resources for its
children.
With these changes, chipc will use reference counting of SYS_RES_MEMORY
allocation/activation requests, to decide when to allocate/activate/
deactivate/release resources from the parent bhnd(4) bus.
The requesting child device is allocated a new resource from chipc's
rman, pointing to (possibly a subregion of) the refcounted bhnd resources
allocated by chipc.
Other resource types are just passed directly to the parent bhnd bus;
RF_SHAREABLE works just fine with IRQs.
I also lifted the SPROM device code out into a common driver, since this
now allows me to hang simple subclasses off of a common driver off of both
bhndb_pci and bhnd_chipc.
Tested:
* (landonf) Tested against BCM4331 and BCM4312, confirmed that SPROM still
attaches and can be queried.
Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: mizkha@gmail.com
Differential Revision: https://reviews.freebsd.org/D6471
The EFSYS_PREEMPT_DISABLE() and EFSYS_PREEMPT_ENABLE() macros
were used to ensure correct timing of I2C operations. The APIs
for I2C operations have been removed, so these macros have no
callers.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
It does not belong to the vmbus.
While I'm here rework the Hypercall setup, e.g. use busdma(9)
and avoid bit fields.
Discussed with: Jun Su <junsu microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6445
The variable "size" stores number of words (4bytes). But the loop over
memory uses size as number of bytes to scan memory. As result it fetches
only 1/4th of memory.
This patch solves this problem and nvram2env fetches all NVRAM variables.
Test plan:
Pre-requisites: any MIPS board with ASCII-based NVRAM mapped into memory
* Add "device nvram2env" into kernel configuration
* Specify hints: base is mandatory (according to nvram2env(4))
hint.nvram.0.base=0x1c7f8000 (it's valid address for Asus RT-N53 with
flags = 0x4)
* Build & load kernel with bootverbose
Actual result: only part of nvram variables are found
Expected result: all variables are found
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6466
This adds a BHND_BUS_GET_ATTACH_TYPE(); the primary use-case is to let
chipc make a coarse-grained determination as to whether UART, SPI, etc
drivers ought to be attached, and on fullmac devices, whether a real
CPU driver ought to be skipped for the ARM core, etc.
Tested:
* BCM4331 (BHND)
* BCM4312 (SIBA)
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6492
Override global retry limit (which is set in R92C_RL) via per-frame
TX descriptor field. Obsoletes D3840 (should work better with 2+ vaps).
Tested with RTL8188EU and RTL8192CUS in STA mode (maxretry = [3-9]).
After r285994, sysctl(8) was fixed to use 273.15 instead of 273.20 as 0C
reference and as result, the temperature read in sysctl(8) now exibits a
+0.1C difference.
This commit fix the kernel references to match the reference value used in
sysctl(8) after r285994.
Sponsored by: Rubicon Communications (Netgate)
The GPIO hardware should not be owned by a single device, this defeats any
chance of use of the GPIO controller as an interrupt source.
ow(4) is now the only consumer of this 'feature' before we can remove it
for good.
Discussed with: ian, bsdimp
