Import Illumos changes to address the following Illumos issues:
4976 zfs should only avoid writing to a failing non-redundant
top-level vdev
4978 ztest fails in get_metaslab_refcount()
4979 extend free space histogram to device and pool
4980 metaslabs should have a fragmentation metric
4981 remove fragmented ops vector from block allocator
4982 space_map object should proactively upgrade when feature
is enabled
4984 device selection should use fragmentation metric
MFC after: 2 weeks
been transferred from zio_compress_data to its caller. Therefore, passing
the 'minblocksize' down will be a no-op.
Eliminate the parameter to reduce diff against upstream.
MFC after: 2 weeks
read workload by splitting the single teardown rrw lock into
RRM_NUM_LOCKS (17) of them.
Read acquisitions are randomly distributed among these locks based
on curthread pointer. Write acquisitions are going to all the
locks, which for the usage of this type of lock should be rare.
Illumos issue:
5008 lock contention (rrw_exit) while running a read only load
MFC after: 2 weeks
When a sync task is waiting for a txg to complete, we should hurry it along
by increasing the number of outstanding async writes (i.e. make
vdev_queue_max_async_writes() return a larger number).
Illumos issue:
4753 increase number of outstanding async writes when sync task is waiting
MFC after: 2 weeks
Change the interaction between the DMU and ARC so that when the DMU is
shutting down an objset, we do not evict the data from the ARC. Instead
we simply coordinate the destruction of the DMU's data with the ARC.
The only case where we actually need to explicitly evict from the ARC is
when dbuf_rele_and_unlock() determines that the administrator has requested
that it not be kept in memory, via the primarycache/secondarycache properties.
In this case, we evict the data from the ARC by its blkptr_t, the same way
as when a block is freed we explicitly evict it from the ARC.
Illumos issue:
4631 zvol_get_stats triggering too many reads
MFC after: 2 weeks
Instead of asserting all zio's be properly aligned, only assert
on the logical ones.
Cap uberblocks at 8k, otherwise with ashift=17, there would be
only one uberblock.
This fixes a problem that zdb would trip assert on pools with
ashift >= 0xe (8k).
While there, also change the code so it only attempt to condense
space map unless the uncondensed size consumes greater than
zfs_metaslab_condense_block_threshold blocks.
Illumos issue:
4958 zdb trips assert on pools with ashift >= 0xe
MFC after: 2 weeks
Improve extreme rewind import.
When doing an "extreme rewind" import ("zpool import -XF"), we attempt
to verify all data in the pool, essentially scrubbing the entire pool.
The problem is that spa_load_verify_cb() issues an unbounded number of
concurrent scrub i/os. This can lead to all of memory being used for
these zio's, wedging the system. Like normal scrub, we need to put a
cap on the number of outstanding i/os, and have the traverse thread
block when we reach this cap.
For this purpose the cap can be very large (10,000) to optimize the
elevator algorithm. Three kernel tunables have been added:
vfs.zfs.spa_load_verify_maxinflight
vfs.zfs.spa_load_verify_metadata
vfs.zfs.spa_load_verify_data
The latter two tunables controls whether metadata and/or user data
when doing extreme rewind.
Make 'zpool import -T' imply scrub.
Make zpool import -T <txg> accept hexadecimal values for the txg when
prefixed with 0x.
Skip txg's for which there is no uberblock when doing extreme rewind.
Skip reading all user data twice by skipping prefetches when doing
extreme rewinds as we do not access via the ARC.
Illumos issues:
4970 need controls on i/o issued by zpool import -XF
4971 zpool import -T should accept hex values
4972 zpool import -T implies extreme rewind, and thus a scrub
4973 spa_load_retry retries the same txg
4974 spa_load_verify() reads all data twice
MFC after: 2 weeks
the upstream implementation and helps ensure that a trap induced by tracing
fbt::trap:entry is handled without recursively generating another trap.
This makes it possible to run most (but not all) of the DTrace tests under
common/safety/ without triggering a kernel panic.
Submitted by: Anton Rang <anton.rang@isilon.com> (original version)
Phabric: D95
Use reserved space for ZFS administrative commands.
We reserve 1/2^spa_slop_shift = 1/32 or 3.125% of pool space (or 32MB at
least) for system use. Most ZPL operations, e.g. write(2), creat(2), will
fail with ENOSPC if we fall below this.
Certain operations, e.g. file removal and most administrative actions,
still permitted until half of the slop space is used. This would allow
users to use these operations to free up space in the pool when pool is
close to full but half of slop space is still free.
A very restricted set of operations that frees up space or change quota
are always permitted, regardless of the amount of free space.
MFC after: 2 weeks
Explicitly mark file removal transactions as "presumed to result
in a net free of space" so they will not fail with ENOSPC.
Illumos issue: 4950 files sometimes can't be removed from a full
filesystem
MFC after: 2 weeks
While it is possible to create and write file, modify its permissions, etc.
without ever doing sync, it looks odd that it is required for setting
extended file attributes on ZFS. UFS does not do sync there too.
Samba uses those extended attributes to store some its data, and doing it
synchronously by many times reduces file creation performance for systems
without SLOG device.
Reviewed by: delphij, jpaetzel, silence on fs@
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
6679140 asymmetric alloc/dealloc activity can induce dynamic variable drops
6679193 dtrace_dynvar walker produces flood of dtrace_dynhash_sink
This finishes a set of merges from the older OpenSolaris releases.
Still the FreeBSD port has many differences that are difficult to
account for but that seems normal given that the kernels are different.
MFC after: 1 week
6851093 system drops to kmdb with anonymous dtrace probes + kmdb
This has no effect on FreeBSD (code is ifdef'ed) but is useful as
reference for future merges.
MFC after: 1 week
Don't check ZVOL_WCE flag, used in Solaris to control device "write cache".
It is not applicable on FreeBSD and by default set to "disable".
MFC after: 3 days
These have no effect on FreeBSD, in fact they are ifdef'ed,
but make easier future merges:
6699767 panic in spec_open()
6718877 crgetzoneid() use can cause problems when forking processes with
USDT providers in a non global zone
MFC after: 3 days
MFV r260708
4427 pid provider rejects probes with valid UTF-8 names
Use of u8_textprep.c broke the build on powerpc.
Reported by: bz, rpaulo and tinderbox.
Pointyhat: me
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
2915 DTrace in a zone should see "cpu", "curpsinfo", et al
2916 DTrace in a zone should be able to access fds[]
2917 DTrace in a zone should have limited provider access
MFC after: 2 weeks
4427 pid provider rejects probes with valid UTF-8 names
This make use of Solaris' u8_validate() which we happen to
use since r185029 for ZFS.
Illumos Revision: 1444d846b126463eb1059a572ff114d51f7562e5
Reference:
https://www.illumos.org/issues/4427
Obtained from: Illumos
MFC after: 2 weeks
usage from dtrace. The dtrace code already uses cdevpriv(9) since FreeBSD
8, so this change should be quite harmless.
Reviewed by: markj
Approved by: markj
MFC after: never
the 4 byte-aligned dtrace_invop_callsite can be found and that it
immediately follows the call to dtrace_invop(). Secondly, fix some pointer
arithmetic to account for differences between struct i386_frame and illumos'
struct frame. Finally, ensure that dtrace_getarg() isn't inlined. It works
by following a fixed number of frame pointers to the probe site, so inlining
breaks it.
MFC after: 3 weeks
first five for probes entered through a UD fault (i.e. FBT probes).
Specifically, handle the fact that dtrace_invop_callsite must be
16 byte-aligned and thus may not immediately follow the call to
dtrace_invop() in dtrace_invop_start(). Also fetch register arguments and
the stack pointer through a struct trapframe instead of a struct reg.
PR: 191260
Submitted by: luke.tw@gmail.com
MFC after: 3 weeks
