environ(7) was in AT&T Version 7
ac(8): Add a HISTORY section
sa(8): Add a HISTORY section
sqrt(3): Add the actual sqrt function to the HISTORY section
Obtained from: OpenBSD
Submitted by: gbergling@gmail.com
Approved by: bcr@(mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23693
ACPI Control Method Batteries have a _BIF and/or _BIX object which
provide static properties of the battery. FreeBSD acpi_cmbat module
supported _BIF object only, which was deprecated as of ACPI 4.0.
_BIX is an extended version of _BIF defined in ACPI 4.0 or later.
As of writing, _BIX has two revisions. One is in ACPI 4.0 (rev.0) and
another is in ACPI 6.0 (rev.1). It seems that hardware vendors still
stick to _BIF only or _BIX rev.0 + _BIF for the maximum compatibility.
Microsoft requires _BIX rev.0 for Windows machines, so there are some
laptop machines with _BIX rev.0 only. In this case, FreeBSD does not
recognize the battery information.
After this change, the acpi_cmbat module gets battery information from
_BIX or _BIF object and internally uses _BIX rev.1 data structure as
the primary information store in the kernel. ACPIIO_BATT_GET_BI[FX]
returns an acpi_bi[fx] structure built by using information obtained
from a _BIF or a _BIX object found on the system. The revision number
field can be used to check which field is available. The acpiconf(8)
utility will show additional information if _BIX is available.
Although ABIs of ACPIIO_BATT_* were changed, the existing APIs for
userland utilities are not changed and the backward-compatible ABIs
are provided. This means that older versions of acpiconf(8) can also
work with the new kernel. The (union acpi_battery_ioctl_arg) was
padded to 256 byte long to avoid another ABI change in the future.
A _BIX object with its revision number >1 will be treated as
compatible with the rev.1 _BIX format.
Reviewed by: takawata
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23728
Japanese keyboards traditionally use 0x5c for
both Japanese yen sign key and backslash key.
While a Japanese yen sign is depicted on the keytop,
most of Japanese expect that the scan code 0x7d gives
a backslash (0x5c), not a Japanese yen sign (0xa5).
This is because JIS X 0201 encoding (aka ISO/IEC 646-JA,
an extended version of ASCII which is very popular
in Japan) has Japanese yen sign at 0x5c and
no backslash. On the other hand, ISO/IEC 8859-1
has Japanese yen sign at 0xa5. This difference has
caused a confusion after Unicode became popular since
ISO/IEC 10646 adopted 8859-1 for the plane 0.
MFC after: 1 week
Key and cookie management typically wants to
avoid information leaks by explicitly zeroing
before free. This routine simplifies that by
permitting consumers to do so without carrying
the size around.
Reviewed by: jeff@, jhb@
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D22790
The function allows to peek at the thread exit status and even see
return value, without joining (and thus finally destroying) the target
thread.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D23676
Support for NO_CTF, NO_DEBUG_FILES, NO_INSTALLLIB, NO_MAN, NO_PROFILE,
and NO_WARNS as deprecated in 2014 with a warning added for each one
found. Turn these into error in preperation for removal of compatability
support before FreeBSD 13.
This was previously committed in r354909 and reverted in r355011 due to
unforseen impacts on ports. I've since corrected all amd64 and i386
ports reported in prior runs as well as instance of these variables I
found via grep.
It was saved from the initial purge of drivers in fcp-101 due to being
the onboard Ethernet device on a number of sparc64 machines. Now that
sparc64 is gone, it serves little purpose (PCI cards exist, but are rare
and are unlikely to have been deployed outside Sun systems).
MFC after: 3 days
As explained in the comment; GOOGLETEST cannot currently be compiled on any
mips variant at the moment due to the cross toolchain seemingly using the
wrong spec and not pulling in libgcc. We'll be fine when llvm 10 lands, at
which point this should be reverted most expeditiously.
libssp_nonshared.a defines one symbol, __stack_chk_fail_local. This
is used only on i386 and powerpc; other archs emit calls directly to
__stack_chk_fail. Simplify linking on other archs by omitting it.
PR: 242941 [exp-run]
simple_httpd was granted a reprieve from the picobsd removal based on having
some reported user; it turns out this user isn't actually using the version
in base and merging their changes would be difficult at this point, so the
version in base will simply continue to rot. Retire it now, it may make a
comeback to ports with the improved version.
No notice issued because its current visibility has only been for ~3
months, and a notice has been previously issued about picobsd removal.
This simplifies the driver's rx fast path as well as the bookkeeping
code that tracks various rx buffer sizes and layouts.
MFC after: 1 week
Sponsored by: Chelsio Communications
The ports framework recently grew support for installing dependencies with
a dedicated target called "install-missing-packages". Let's retire the
carefully constructed one-liner that was used for getting dependencies so
far and use the official ports target instead.
Reviewed by: bcr
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D23485
"*-out" is a complex way of phrasing the fact, and it causes
confusion for people.
Submitted by: debdrup
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D23482
The Parallel Port SCSI adapter was interesting for 100MB ZIP drives, but is no
longer used or maintained. Remove it from the tree.
The Parallel Port microsequencer (microseq.9) is now mostly unused in the tree,
but remains. PPI still refrences it, but doesn't use its full functionality.
Relnotes: Yes
Reviewed by: rgrimes@, Ihor Antonov
Discussed on: arch@
Differential Revision: https://reviews.freebsd.org/D23389
This driver has seen no real changes for almost 20 years. It's for
hardware that's 25 years old. It has no reports of active use, nor
has it been seen in the NYCBug dmesg database at all. Schedule
its removal for 13.0.
Reviewed by: rgrimes@ (earlier version)
Relnote: Yes
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D23403
If package-level control is present, we default to using it. Per-core
software control may be enabled by setting the machdep.hwpstate_pkg_ctrl
tunable to "0" in loader.conf(5).
Disable new clang 10.0.0 warnings about misleading indentation in flex.
As this is contributed code with very messy indentation, which will
almost certainly never be upgraded, just disable the warning.
MFC after: 3 days
Work around two -Werror warning issues in googletest, which have been
solved upstream in the mean time.
The first issue is because one of googletest's generated headers contain
classes with a user-declared copy assignment operator, but rely on the
generation by the compiler of an implicit copy constructor, which is now
deprecated:
/usr/obj/usr/src/amd64.amd64/tmp/usr/include/private/gtest/internal/gtest-param-util-generated.h:5284:8: error: definition of implicit copy constructor for 'CartesianProductHolder3<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' is deprecated because it has a user-declared copy assignment operator [-Werror,-Wdeprecated-copy]
void operator=(const CartesianProductHolder3& other);
^
/usr/obj/usr/src/amd64.amd64/tmp/usr/include/private/gtest/gtest-param-test.h:1277:10: note: in implicit copy constructor for 'testing::internal::CartesianProductHolder3<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' first required here
return internal::CartesianProductHolder3<Generator1, Generator2, Generator3>(
^
/usr/src/tests/sys/fs/fusefs/io.cc:534:2: note: in instantiation of function template specialization 'testing::Combine<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' requested here
Combine(Bool(), /* async read */
^
For now, silence the warning using -Wno-deprecated-copy.
The second issue is because one of the googlemock test programs attempts
to use "unsigned wchar_t" and "signed wchar_t", which are non-standard
and at best, hazily defined:
contrib/googletest/googlemock/test/gmock-actions_test.cc:111:37: error: 'wchar_t' cannot be signed or unsigned [-Wsigned-unsigned-wchar]
EXPECT_EQ(0U, BuiltInDefaultValue<unsigned wchar_t>::Get());
^
contrib/googletest/googlemock/test/gmock-actions_test.cc:112:36: error: 'wchar_t' cannot be signed or unsigned [-Wsigned-unsigned-wchar]
EXPECT_EQ(0, BuiltInDefaultValue<signed wchar_t>::Get());
^
For now, silence the warning using -Wno-signed-unsigned-wchar.
MFC after: 3 days
solved upstream in the mean time.
The first issue is because one of googletest's generated headers contain
classes with a user-declared copy assignment operator, but rely on the
generation by the compiler of an implicit copy constructor, which is now
deprecated:
/usr/obj/usr/src/amd64.amd64/tmp/usr/include/private/gtest/internal/gtest-param-util-generated.h:5284:8: error: definition of implicit copy constructor for 'CartesianProductHolder3<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' is deprecated because it has a user-declared copy assignment operator [-Werror,-Wdeprecated-copy]
void operator=(const CartesianProductHolder3& other);
^
/usr/obj/usr/src/amd64.amd64/tmp/usr/include/private/gtest/gtest-param-test.h:1277:10: note: in implicit copy constructor for 'testing::internal::CartesianProductHolder3<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' first required here
return internal::CartesianProductHolder3<Generator1, Generator2, Generator3>(
^
/usr/src/tests/sys/fs/fusefs/io.cc:534:2: note: in instantiation of function template specialization 'testing::Combine<testing::internal::ParamGenerator<bool>, testing::internal::ValueArray3<int, int, int>, testing::internal::ValueArray4<cache_mode, cache_mode, cache_mode, cache_mode> >' requested here
Combine(Bool(), /* async read */
^
For now, silence the warning using -Wno-deprecated-copy.
The second issue is because one of the googlemock test programs attempts
to use "unsigned wchar_t" and "signed wchar_t", which are non-standard
and at best, hazily defined:
contrib/googletest/googlemock/test/gmock-actions_test.cc:111:37: error: 'wchar_t' cannot be signed or unsigned [-Wsigned-unsigned-wchar]
EXPECT_EQ(0U, BuiltInDefaultValue<unsigned wchar_t>::Get());
^
contrib/googletest/googlemock/test/gmock-actions_test.cc:112:36: error: 'wchar_t' cannot be signed or unsigned [-Wsigned-unsigned-wchar]
EXPECT_EQ(0, BuiltInDefaultValue<signed wchar_t>::Get());
^
For now, silence the warning using -Wno-signed-unsigned-wchar.
MFC after: 3 days
Add a sysctl knob to allow users to re-enable it, and document the knob and
default in cpufreq.4. (While here, add a few unrelated updates to
cpufreq.4.)
It seems that the register value in some hardware simply reflects the
configured P-state. This results in an inadvertent and unintended outcome
where the P-state can only walk down, and then the driver becomes "stuck" in
the slowest possible P-state.
The Linux driver never consults this register, so that's some evidence that
ignoring the contents are relatively harmless.
PR: 234733
Reported by: sigsys AT gmail.com, Erich Dollanksy <freebsd.ed.lists AT
sumeritec.com>
After r355784 the td_oncpu field is no longer synchronized by the thread
lock, so the stack capture interrupt cannot be delievered precisely.
Fix this using a loop which drops the thread lock and restarts if the
wrong thread was sampled from the stack capture interrupt handler.
Change the implementation to use a regular interrupt instead of an NMI.
Now that we drop the thread lock, there is no advantage to the latter.
Simplify the KPIs. Remove stack_save_td_running() and add a return
value to stack_save_td(). On platforms that do not support stack
capture of running threads, stack_save_td() returns EOPNOTSUPP. If the
target thread is running in user mode, stack_save_td() returns EBUSY.
Reviewed by: kib
Reported by: mjg, pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23355
The device list hasn't aged well. All these devices are over a decade old. umass
supports thunb drives almost universally, and the list is too long to try to
list here.
Remove some obsolete advice as well. This isn't the place to talk about how to
create FAT filesystems, nor now to mount them. The only advice that's still
useful is the rescanning of a multi-slot flash adapater.
MFC After: 3 days
This should fix linker errors when building with clang+lld.
After this change the lib32 compat libraries are now buildt with
-mhard-float instead of -msoft-float
Reviewed By: brooks, jhb
Differential Revision: https://reviews.freebsd.org/D23229
ng_nat implements NAT for IPv4 traffic only. When connected to an
ng_ether node it erroneously handled IPv6 packets as well.
This change is not sufficient: ng_nat does not do any validation of IP
packets in this mode, even though they have not yet passed through
ip_input().
PR: 243096
Reported by: Robert James Hernandez <rob@sarcasticadmin.com>
Reviewed by: julian
Differential Revision: https://reviews.freebsd.org/D23080
Intel Speed Shift is Intel's technology to control frequency in hardware,
with hints from software.
Let's get a working version of this in the tree and we can refine it from
here.
Submitted by: bwidawsk, scottph
Reviewed by: bcr (manpages), myself
Discussed with: jhb, kib (earlier versions)
With feedback from: Greg V, gallatin, freebsdnewbie AT freenet.de
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18028
/etc/termcap is a symlink to /usr/share/misc/termcap, which is in the
runtime package. Tag the symlink with the same package so that it is
handled correctly on pkgbase-installed/updated systems.
Sponsored by: The FreeBSD Foundation
and will slowly transition from /usr/local/man to it. To reflect this remove
the documentation of the manpages being an exception in the layout of /usr/local
Reported by: Dan Nelson <dnelson_1901@yahoo.com> (via IRC)
MFC after: 3 days
x86 needs bootstrap GNU as for assembling a few files, and powerpc needs
GNU ld.bfd for linking 32-bit objects. All other targets either fully
use in-tree Clang and lld, or rely on external toolchain.
Sponsored by: The FreeBSD Foundation
dma(8) depends on OpenSSL unconditionally.
Reported by: Michael Dexter's Build Options Survey run
MFC after: 1 weeks
Sponsored by: The FreeBSD Foundation
Filemon will add the ability to ignore the cookie if the installed file is
missing. Without filemon that's not possible though so if the cookie is present
an the command unchanged then the install wouldn't run.
Sponsored by: DellEMC
MFC after: 2 weeks
Most of the gpio controller cannot configure or get the configuration
of the pin muxing as it's usually handled in the pinctrl driver.
But they can know what is the pinmuxing driver either because they are
child of it or via the gpio-range property.
Add some new methods to fdt_pinctrl that a pin controller can implement.
Some methods are :
fdt_pinctrl_is_gpio: Use to know if the pin in the gpio mode
fdt_pinctrl_set_flags: Set the flags of the pin (pullup/pulldown etc ...)
fdt_pinctrl_get_flags: Get the flags of the pin (pullup/pulldown etc ...)
The defaults method returns EOPNOTSUPP.
Reviewed by: ian, bcr (manpages)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23093
Profiling library archives are part of the development environment; they
don't need to be in separate -profile packages.
(In fact we can probably just eliminate the _p.a archives assuming that
profiling will be done using hwpmc etc., but that is a change for later.)
Discussed with: bapt, manu
Sponsored by: The FreeBSD Foundation
'install' target is invoked.
While here, bump the sample output version name, and explicitly
add the 'obj' target to avoid polluting the src checkout.
Submitted by: Trond Endrestol
PR: 243287 (related)
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (netgate.com)
This enables virtio modules on PowerPC* target.
On PowerPC64, drivers are also kernel builtin.
QEMU currently needs to be patched to in order to work on LE hosts due to known
issue affecting pre-1.0 (legacy) virtio drivers.
The patch was submitted to QEMU mail list by @afscoelho_gmail.com, available at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg01496.html
Submitted by: Alfredo Dal'Ava Junior <alfredo.junior@eldorado.org.br>
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D22833
arichardson has an actual fix for the same issue that this was working
around; given that we don't build with llvm today, go ahead and revert the
workaround in advance.
This provides a specific pointer for users of tap(4) to understand why their
interfaces are losing their addresses, and specifically how to workaround
this if they need different behavior.
This manpage received a .Dd bump earlier today in r35688, so no bump occurs
this time.
Submitted by: sigsys@gmail.com (via IRC)
Explicitly setting WITHOUT_KERBEROS implies WITHOUT_KERBEROS_SUPPORT,
but previously other cases that forced KERBEROS off (such as
WITHOUT_CRYPT) did not also set KERBEROS_SUPPORT off. Because the
_SUPPORT dependent options (KERBEROS/KERBEROS_SUPPORT) are processed
before other dependencies (CRYPT/KERBEROS) it's not easy to make this
happen automatically. Instead just explicitly set KERBEROS_SUPPORT
off where we set KERBEROS off.
Reported by: Michael Dexter's Build Option Survey run
Step 5 (Update Mentor and Mentee Information) from Commiters guide.
I also alphababetize mentees from tcberner.
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D23125
hard use floating point hardware, pass registers to functions in
floating point registers.
softfp use floating point hardware, but pass registers to functions
in integer registers.
soft do floating point calcuations without using floating point
hardware. Pass arguments in integer registers.
FreeBSD 11 and newer assumes hard. 10 and earlier assumed softfp. We have no
real support, at the moment, for soft. It's untested, though, if softfp still
works.
Add a note here since this is a whack-a-doodle combination relative to all other
platforms.
softfp is likely to go away in the future because it was retained for people
using FreeBSD 10 + armv6 needing to transition more slowly from softfp -> hard
than the project. It likely is no longer needed, and may be getting in the
way of people needing 'soft' support.
It's not immediately clear by what mechanism loader(8) will be loading the
preloaded file. Specifically name-drop loader.conf(5) with a pointer to the
module loading section and a description of what the 'name' should look
like, because that certainly isn't clear from the loader.conf(5) standpoint.
The default loader.conf already has a pointer to md(4) where it appears and
the reference to loader.conf in the new version of this manpage should make
it more clear that this is where one should look for information.
Reported by: swills
Reviewed by: swills, manpages (bcr)
With revision by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D22844
- Garbage collect UMA_ZONE_PAGEABLE & UMA_ZONE_STATIC.
- Move flag VTOSLAB from public to private.
- Introduce public NOTPAGE flag and make HASH private.
- Introduce public NOTOUCH flag and make OFFPAGE private.
- Update man page.
The net effect of this should be to make the contract with clients more
clear. Clients should choose constraints, UMA will figure out how to
implement them. This also breaks the confusing double meaning of
OFFPAGE.
Reviewed by: jeff, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23016
Only sparc64 did not enable LLVM_LIBUNWIND. After r356513 LLVM_LIBUNWIND
should at least build on sparc64. The old DWARF unwinder will be removed
along with GCC 4.2.1 in the near future, so switch sparc64 to use LLVM's
unwinder in advance of the removal. Someone with access to the obsolete
sparc64 hardware supported by FreeBSD will have to test, and investigate
any failures. I will gladly help, but I don't have any suitable hardware
myself.
PR: 233405
bsd.cpu.mk is included by bsd.init.mk before bsd.linker.mk, so it
was always setting the flag since LINKER_FEATURES wasn't defined.
Reported by: mhorne
Reviewed by: imp, mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23076
- Enable clang and lld as system toolchains.
- Don't use external GCC for universe by default.
- Re-enable riscv64sf since it builds fine with clang + lld.
Reviewed by: emaste, mhorne
Relnotes: yes
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23089
This allows cheapest DRAM-less NVMe SSDs to use some of host RAM (about
1MB per 1GB on the devices I have) for its metadata cache, significantly
improving random I/O performance. Device reports minimal and preferable
size of the buffer. The code limits it to 1% of physical RAM by default.
If the buffer can not be allocated or below minimal size, the device will
just have to work without it.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
This re-enables building the googletest suite by default on mips and instead
specifically doesn't build fusefs tests for mips+clang builds. clang will
easily spent >= 1.5 hours compiling a single file due to a bug in
optimization (see LLVM PR 43263), so turn these off for now while that's
hashed out.
GCC builds are unaffected and build the fusefs tests as-is. Clang builds
only happen by early adopters attempting to hash out the remaining issues.
The comment has been updated to reflect its new position and use less strong
wording about imposing on people.
Discussed with: ngie, asomers
Reviewed by: ngie
Extend r356379 to include 32-bit mips and sparc64. Using a decade-old
binutils linker with a contemporary compiler (either Clang or GCC) is
a combination unlikely to be used by anyone else, and it's not going
to be a good use of our time investigating and addressing any issues
that arise. Expect that all architectures newly migrated to external
GCC will also use external binutils.
After GCC was disabled by default in r356367, mips and sparc64 started
relying external GCC. However, the in-tree Binutils ld 2.17.50 is not
compatible with GCC for some mips64 targets, so turn off
BINUTILS_BOOTSTRAP and rely on external binutils (linker) as well.
For libssp.so, rebuild stack_protector.c with FORTIFY_SOURCE stubs that just
abort built into it.
For libssp_nonshared.a, steal stack_protector_compat.c from
^/lib/libc/secure and massage it to maintain that __stack_chk_fail_local
is a hidden symbol.
libssp is now built unconditionally regardless of {WITH,WITHOUT}_SSP in the
build environment, and the gcclibs version has been disconnected from the
build in favor of this one.
PR: 242950 (exp-run)
Reviewed by: kib, emaste, pfg, Oliver Pinter (earlier version)
Also discussed with: kan
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22943
Use "mipsel" instead of "mips" as the 32-bit MACHINE_ARCH when
building lib32 for little-endian 64-bit MIPS targets. This fixes an
error where some objects were compiled as LE and others compiled as BE
causing a link error for rtld32.
Reviewed by: emaste
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23028
More MACHINE_CPUARCH/MACHINE_ARCH cases enable these options than
disable them, and several of them have work in progress to switch over.
Thus, invert the sense of the test and list cases not using LLD as the
exceptions.
There were a few special cases for arm v5, such as disabling LLDB due to
the lack of 64-bit atomic operations. Now that arm has been retired (as
of r356263) we can simplify the options logic somewhat.
An i2c bus can be divided into segments which can be selectively connected
and disconnected from the main bus. This is usually done to enable using
multiple slave devices having the same address, by isolating the devices
onto separate bus segments, only one of which is connected to the main bus
at once.
There are several types of i2c bus muxes, which break down into two general
categories...
- Muxes which are themselves i2c slaves. These devices respond to i2c
commands on their upstream bus, and based on those commands, connect
various downstream buses to the upstream. In newbus terms, they are both
a child of an iicbus and the parent of one or more iicbus instances.
- Muxes which are not i2c devices themselves. Such devices are part of the
i2c bus electrically, but in newbus terms their parent is some other
bus. The association with the upstream bus must be established by
separate metadata (such as FDT data).
In both cases, the mux driver has one or more iicbus child instances
representing the downstream buses. The mux driver implements the iicbus_if
interface, as if it were an iichb host bridge/i2c controller driver. It
services the IO requests sent to it by forwarding them to the iicbus
instance representing the upstream bus, after electrically connecting the
upstream bus to the downstream bus that hosts the i2c slave device which
made the IO request.
The net effect is automatic mux switching which is transparent to slaves on
the downstream buses. They just do i2c IO they way they normally do, and the
bus is electrically connected for the duration of the IO and then idled when
it is complete.
The existing iicbus_if callback() method is enhanced so that the parameter
passed to it can be a struct which contains a device_t for the requesting
bus and slave devices. This change is done by adding a flag that indicates
the extra values are present, and making the flags field the first field of
a new args struct. If the flag is set, the iichb or mux driver can recast
the pointer-to-flags into a pointer-to-struct and access the extra
fields. Thus abi compatibility with older drivers is retained (but a mux
cannot exist on the bus with the older iicbus driver in use.)
A new set of core support routines exists in iicbus.c. This code will help
implement mux drivers for any type of mux hardware by supplying all the
boilerplate code that forwards IO requests upstream. It also has code for
parsing metadata and instantiating the child iicbus instances based on it.
Two new hardware mux drivers are added. The ltc430x driver supports the
LTC4305/4306 mux chips which are controlled via i2c commands. The
iic_gpiomux driver supports any mux hardware which is controlled by
manipulating the state of one or more gpio pins. Test Plan
Tested locally using a variety of mux'd bus configurations involving both
ltc4305 and a homebrew gpio-controlled mux. Tested configurations included
cascaded muxes (unlikely in the real world, but useful to prove that 'it all
just works' in terms of the automatic switching and upstream forwarding of
IO requests).
- Drop mention of _LP64. FreeBSD's source generally uses __LP64__
instead of _LP64, and the relevant macros are better covered in the
"Predefined Macros" section.
- Fix a noun/verb disagreement.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22975
- Add missing .Pp after the end of some lists so that there is a blank
line before the subsequent paragraph.
- Use a more typical '-tag' bullet list of the make variable descriptions
at the end. This adds separation between bullets and is the formatting
typically used in manpages for this sort of list.
We use the BSDL devicetree compiler as long as we have a C++11 compiler.
dtc is not needed as a build tool on the platforms that are still using
GCC 4.2.1 (and it is being disabled very soon, anyhow).
Discussed with: imp, kevans
PowerPC switched to LLVM_LIBUNWIND along with the switch to Clang/LLVM
in r356111. This leaves only 32-bit Arm and sparc64 not using LLVM's
unwinder, so switch the sense to opt-out.
I elected to list the individual arm MACHINE_ARCHs so future changes
are more clear if LLVM_LIBUNWIND is enabled for one or two but not all
32-bit Arm targets (see PR 233664).
After PowerPC switched in r356111, the list of targets using LLVM as the
default toolchain is much longer than those not using it. Switch the
sense of the test to exclude those not using LLVM.
Targets not using LLVM is currently mips, riscv5, and sparc64; work is
in progress to migrate the first two to LLVM.
r355588 Fix WITHOUT_CLANG build
r355646 Revert r354348
r355943 add LDNS build knob dependency on OPENSSL
r356111 Use LLVM as default toolchain for all PowerPC targets
To be used when like rmlocks, except when sleeping for readers needs to be
allowed. See the manpage for more information.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D22823
This enables LLVM as the default compiler for powerpc, powerpc64, and
powerpcspe, as well as LLD as the default linker for powerpc64.
LLD is not yet ready for prime time for powerpc and powerpcspe, but work is
continuing on it.
Submitted by: alfredo.junior_eldorado.org.br
Relnotes: YES
Differential Revision: https://reviews.freebsd.org/D20378
srandom(9) is meaningless on SMP systems or any system with, say,
interrupts. One could never rely on random(9) to produce a reproducible
sequence of outputs on the basis of a specific srandom() seed because the
global state was shared by all kernel contexts. As such, removing it is
literally indistinguishable to random(9) consumers (as compared with
retaining it).
Mark random(9) as deprecated and slated for quick removal. This is not to
say we intend to remove all fast, non-cryptographic PRNG(s) in the kernel.
It/they just won't be random(9), as it exists today, in either name or
implementation.
Before random(9) is removed, a replacement will be provided and in-tree
consumers will be converted.
Note that despite the name, the random(9) interface does not bear any
resemblance to random(3). Instead, it is the same crummy 1988 Park-Miller
LCG used in libc rand(3).
_sleep(9), wakeup(9), sleepqueue(9), et al do not dereference or modify the
channel pointers provided in any way; they are merely used as intptrs into a
dictionary structure to match waiters with wakers. Correctly annotate this
such that _sleep() and wakeup() may be used on const pointers without
invoking ugly patterns like __DECONST(). Plumb const through all of the
underlying sleepqueue bits.
No functional change.
Reviewed by: rlibby
Discussed with: kib, markj
Differential Revision: https://reviews.freebsd.org/D22914
Summary:
This patch is to support ongoing work for replacing "GCC/BFD" by "CLANG/LLD" on
target PowerPC64 [1], by proposing a way to specify and/or locate a secondary
ld.bfd linker.
This is necessary as LLD currently doesn't support PowerPC 32 bits, so we keep
using BFD for the 32 bit stuff on PowePC64(LIB32 compatibility and
STAND/slof/loader.)
- creates LD_BFD variable pointing to ld.bfd
- use LD_BFD as linker for LIB32/compat
- Default behavior for other platforms aren't changed.
[1] https://wiki.freebsd.org/powerpc/llvm-elfv2
Submitted by: alfredo.junior_eldorado.org.br
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20261
off the stack, initialized to default values, and then filled in with
driver-specific values, all without having to worry about the numerous
other fields in the tag. The resulting template is then passed into
busdma and the normal opaque tag object created. See the man page for
details on how to initialize a template.
Templates do not support tag filters. Filters have been broken for many
years, and only existed for an ancient make/model of hardware that had a
quirky DMA engine. Instead of breaking the ABI/API and changing the
arugment signature of bus_dma_tag_create() to remove the filter arguments,
templates allow us to ignore them, and also significantly reduce the
complexity of creating and managing tags.
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D22906
- Don't allow an unprivileged user to set the stride. [1]
- Only set the stride under the softc lock.
- Rename the internal fields to accurately reflect their use. Keep
ro_bkt to avoid changing the user API.
- Simplify the implementation. The port index is just sc_seq / stride.
- Document rr_limit in ifconfig.8.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com> [1]
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22857
Disable the warning for WARNS <= 3. This is lame, but it's what we
already do for the clang build.
Reviewed by: dim
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22889
This uses the new layout of the upstream repository, which was recently
migrated to GitHub, and converted into a "monorepo". That is, most of
the earlier separate sub-projects with their own branches and tags were
consolidated into one top-level directory, and are now branched and
tagged together.
Updating the vendor area to match this layout is next.
libmagic only depend on mkmagic if not DIRDEPS_BUILD
libpmc fix -I for libpmcstat
local.dirdeps.mk be even more careful about adding gnu/lib/csu to DIRDEPS
Reviewed by: bdrewery
Differential Revision: https://reviews.freebsd.org/D22872
There are probably bits that are still wrong, but this fixes some
things at least:
- Add named arguments to the functions in crypto(9).
- Add missing algorithms.
- Don't mention arguments that don't exist in crypto_register.
- Add CIOGSESSION2.
- Remove CIOCNFSESSION.
- Clarify some stale language that assumed an fd had only one sesson.
- Note that you have to use CRIOGET and add a note in BUGS lamenting
that one has to use CRIOGET.
- Various other cleanups.
Reviewed by: cem (earlier version)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D22784
than "/compat/linux". Useful when you have several compat directories
with different Linux versions and you don't want to clash with files
installed by linux-c7 packages.
Reviewed by: bcr (manpages)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22574
Document the common practices around copyrights with "all rights reserved" in
them as new copyright notices get added.
It's an open question qhether to point people at the fact that since the Berne
convention was ratified, All rights reserved is largely obsolete.
https://en.wikipedia.org/wiki/All_rights_reserved#Obsolescence has the
details. The committer's guide will be revised shortly, and it's likely that's a
better place for this discussion. If not, I'll add a blurb here.
Reviewed by: jhb@, brooks@
Differential Review: https://reviews.freebsd.org/D22800
Contractions cause problems for translators, so s/aren't/are not/ in the one
place this slipped through.
While here, noticed I commited with the date I did the work, not today's
date. Fix that too.
Noticed by: bjk@
Delay the attachment of children, when requested, until after interrutps are
running. This is often needed to allow children to run transactions on i2c or
spi busses. It's a common enough idiom that it will be useful to have its own
wrapper.
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D21465
s/BIT_NAND/BIT_ANDNOT/, and for CPU and DOMAINSET too. The actual
implementation is "and not" (or "but not"), i.e. A but not B.
Fortunately this does appear to be what all existing callers want.
Don't supply a NAND (not (A and B)) operation at this time.
Discussed with: jeff
Reviewed by: cem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22791
The env space consumed by exporting all libc's .meta files
left little room for command line,
so unexport when done.
Update dirdeps.mk to latest and add
dirdeps-targets.mk to simplify/update targets/Makefile
Makefile changes to go with Makefile.depend changes in D22494
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22495
r355436 moved mitigation sysctls to machdep.mitigations but did not
rationalize the sense of the invidual knobs. Clarify that the old
names remain the canonical way to set these mitigations.
Backwards compatibility will be maintained for the original names
(e.g. hw.ibrs_disable), but not from the interim names
(e.g. machdep.mitigations.ibrs.disable).
Sponsored by: The FreeBSD Foundation
This typedef is the same as timeout_t except that it is in the callout
namespace and header.
Use this typedef in various places of the callout implementation that
were either using the raw type or timeout_t.
While here, add <sys/callout.h> to the manpage.
Reviewed by: kib, imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22751
A number of entries of the form "de.kbd.from-cp850" existed in vt's
INDEX.keymaps, added in r270114, but these files do not exist.
I removed them in r355585 but accidentally re-added them in r355592.
Remove them yet again.
PR: 235564, 235853
MFC after: 1 week
Also sort some entries into the correct location, correct MacBook
capitalization, etc.
PR: 235853
MFC after: 1 week
Submitted by: scootergrisen gmail com
These were the only values in the range from 0 to 0x1f that were defined
as hex values, all other occurances have been converted before.
MFC after: 1 week
This decouples MK_LLVM_TARGET_ALL from MK_CLANG. It is fine if
LLVM_TARGET_* are set even if MK_CLANG is disabled. It never
made sense to depend MK_LLVM_TARGET_* to MK_CLANG (which I did
in r335706).
PR: 240507
Reported by: kevans, swills
MFC after: 2 weeks
A number of entries of the form "de.kbd.from-cp850" existed in vt's
INDEX.keymaps, added in r270114, but these files do not exist.
PR: 235564
Submitted by: scootergrisen gmail com
MFC after: 1 week
The datasheets for these chips claim the maximum is 921,600, but testing
shows these two higher rates also work (but no rates above 921,600 other
than these two work; these represent dividing the base buad clock by 3 and 2
respectively).
The current vnode layout is not smp-friendly by having frequently read data
avoidably sharing cachelines with very frequently modified fields. In
particular v_iflag inspected for VI_DOOMED can be found in the same line with
v_usecount. Instead make it available in the same cacheline as the v_op, v_data
and v_type which all get read all the time.
v_type is avoidably 4 bytes while the necessary data will easily fit in 1.
Shrinking it frees up 3 bytes, 2 of which get used here to introduce a new
flag field with a new value: VIRF_DOOMED.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D22715
When the linker doesn't have this feature, add -mno-relax to CFLAGS
on RISC-V.
Define the feature for ld.bfd, but not lld. If lld gains relaxation
support in a newer version, we can enable it for those versions of lld
in bsd.linker.mk.
Reviewed by: mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22659
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
This makes it possible to retrieve per-connection statistical
information such as the receive window size, RTT, or goodput,
using a newly added TCP_STATS getsockopt(3) option, and extract
them using the stats_voistat_fetch(3) API.
See the net/tcprtt port for an example consumer of this API.
Compared to the existing TCP_INFO system, the main differences
are that this mechanism is easy to extend without breaking ABI,
and provides statistical information instead of raw "snapshots"
of values at a given point in time. stats(3) is more generic
and can be used in both userland and the kernel.
Reviewed by: thj
Tested by: thj
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20655
FDT bindings document for gpio-i2c devices.
Using the gpio_pin_* functions to acquire/release/manipulate gpio pins
removes the constraint that both gpio pins must belong to the same gpio
controller/bank, and that the gpioiic instance must be a child of gpiobus.
Removing those constraints allows the driver to be fully compatible with
the modern dts bindings for a gpio bitbanged i2c bus.
For hinted attachment, the two gpio pins still must be on the same gpiobus,
and the device instance must be a child of that bus. This preserves
compatibility for existing installations that have use gpioiic(4) with hints.
It was introduced by r290122, but no documentation was provided.
This is taken from https://reviews.freebsd.org/D21798, since it
is not related to the feature added there.
Submitted by: Richard Scheffenegger
MFC after: 1 week
Generally, it's preferred that an application fork/setsid if it doesn't want
to keep its controlling TTY, but it could be that a debugger is trying to
steal it instead -- so it would hook in, drop the controlling TTY, then do
some magic to set things up again. In this case, TIOCNOTTY is quite handy
and still respected by at least OpenBSD, NetBSD, and Linux as far as I can
tell.
I've dropped the note about obsoletion, as I intend to support TIOCNOTTY as
long as it doesn't impose a major burden.
Reviewed by: bcr (manpages), kib
Differential Revision: https://reviews.freebsd.org/D22572
r341812 enabled only arm target support in LLVM on arm and armv6,
because ld.bfd 2.17.50 lacked support for range extensions required for
linking such large binaries/libraries. r341812 indicated that the
workaround should be removed once the userland can be linked by lld.
r354289 switched armv6 to use lld by default, so remove the workaround
on armv6. The workaround remains in place for arm (v5), and will
presumably be removed when arm is retired.
Sponsored by: The FreeBSD Foundation
In r353734 the use of the page caches was limited to systems with a
relatively large amount of RAM per CPU. This was to mitigate some
issues reported with the system not able to keep up with memory pressure
in cases where it had been able to do so prior to the addition of the
direct free pool cache. This change re-enables those caches.
The change modifies uma_zone_set_maxcache(), which was introduced
specifically for the page cache zones. Rather than using it to limit
only the full bucket cache, have it also set uz_count_max to provide an
upper bound on the per-CPU cache size that is consistent with the number
of items requested. Remove its return value since it has no use.
Enable the page cache zones unconditionally, and limit them to 0.1% of
the domain's pages. The limit can be overridden by the
vm.pgcache_zone_max tunable as before.
Change the item size parameter passed to uma_zcache_create() to the
correct size, and stop setting UMA_ZONE_MAXBUCKET. This allows the page
cache buckets to be adaptively sized, like the rest of UMA's caches.
This also causes the initial bucket size to be small, so only systems
which benefit from large caches will get them.
Reviewed by: gallatin, jeff
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22393
Add bit_ffs_area_at and bit_ffc_area_at functions for searching a bit
string for a sequence of contiguous set or unset bits of at least the
specified size.
The bit_ffc_area function will be used by the Intel ice driver for
implementing resource assignment logic using a bitstring to represent
whether or not a given index has been assigned or is currently free.
The bit_ffs_area, bit_ffc_area_at and bit_ffs_area_at functions are
implemented for completeness.
I'd like to add further test cases for the new functions, but I'm not
really sure how to add them easily. The new functions depend on specific
sequences of bits being set, while the bitstring tests appear to run for
varying bit sizes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: asomers@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22400
This Makefile sets KERN_OPTS. This permits kernel module Makefiles to
use KERN_OPTS to control the value of variables such as SRCS that are
used by bsd.kmod.mk for KERN_OPTS values that honor WITH/WITHOUT
options for standalone builds.
Each boot, regenerate /var/run/os-release based on the currently running
system. Create a /etc/os-release symlink pointing to this file (so that this
doesn't create a new reason /etc can not be mounted read-only).
This is compatible with what other systems do and is what the sysutil/os-release
port attempted to do, but in an incomplete way. Linux, Solaris and DragonFly all
implement this natively as well. The complete standard can be found at
https://www.freedesktop.org/software/systemd/man/os-release.html
Moving this to the base solves both the non-standard location problem with the
port, as well as the lack of update of this file on system update.
Bump __FreeBSD_version to 1300060
PR: 238953
Differential Revision: https://reviews.freebsd.org/D22271
Mount the UEFI ESP on /boot/efi. No current system uses this by default, but
there are many ad-hoc schemes that do this in /efi or /esp or /uefi and adding a
new directory at the top-level would have a much higher likelihood of
collision. Document this in /etc/mtree/BSD.root.mtree and create EFIDIR and
related variables in bsd.own.mk.
Differential Revision: https://reviews.freebsd.org/D21344
Support for NO_CTF, NO_DEBUG_FILES, NO_INSTALLLIB, NO_MAN, NO_PROFILE,
and NO_WARNS as deprecated in 2014 with a warning added for each one
found. Turn these into error in preperation for removal of compatability
support before FreeBSD 13.
Reviewed by: imp
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22448
r354289 armv6: Switch to LLD by default
r354290 Take arm.arm (armv5) out of universe
r354348 armv6, armv7: Switch to llvm-libunwind by default
r354660 Enable the RISC-V LLVM backend by default.
as well as lib32 changes
Sponsored by: The FreeBSD Foundation
As of FreeBSD 10.1 the autofs(5) is available for automounting, and the
amd man page has indicated that the in-tree copy of amd is obsolete.
Disable it by default for now, with the expectation that it will be
removed before FreeBSD 13.0.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22460
FreeBSDlua ("flua") is a FreeBSD-private lua, flavored with whatever
extensions we need for base system operations. We currently support a subset
of lfs and lposix that are used in the rewrite of makesyscall.sh into lua,
added in r354786.
flua is intentionally written such that one can install standard lua and
some set of lua modules from ports and achieve the same effect.
linit_flua is a copy of linit.c from contrib/lua with lfs and lposix added
in. This is similar to what we do in stand/. linit.c has been renamed to
make it clear that this has flua-specific bits.
luaconf has been slightly obfuscated to make extensions more difficult. Part
of the problem is that flua is already hard enough to use as a bootstrap
tool because it's not in PATH- attempting to do extension loading would
require a special bootstrap version of flua with paths changed to protect
the innocent.
src.lua.mk has been added to make it easy for in-tree stuff to find flua,
whether it's bootstrap-flua or relying on PATH frobbing by Makefile.inc1.
Reviewed by: brooks, emaste (both earlier version), imp
Differential Revision: https://reviews.freebsd.org/D21893
This driver was largely rewritten in 2015 (svn r235911) but the man page was
never updated to match.
Reviewed by: trasz
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D22339
After r354748-354750 all uses of the IP6_EXTHDR_CHECK() and
IP6_EXTHDR_GET() macros are gone from the kernel. IP6_EXTHDR_GET0()
was unused. Remove the macros and update the documentation.
Sponsored by: Netflix
In order to allow software with multiple (different) options
for lex and yacc add extra per-file options to the calls.
This is especially useful when one .l file needs -Pprefix.
Reviewed by: imp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22337
We need to ensure that installdirs-FOO runs before installfiles-FOO since
otherwise the directory may not exist when we attempt to install the target.
This was randomly causing failures in our Jenkins instance when installing
drti.o in cddl/lib/drti.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D22382
By using '__' instead of '.' as the separator we can also support systems
that use dash as /bin/sh (it's the default shell on Ubuntu/Debian). Dash
will unset any environment variables that use a non alphanumeric+undedscore
character and therefore submakes will fail to import the COMPILER_*
variables if we use '.' as the separator.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D22381
This driver allows to usage of the paravirt SCSI controller
in VMware products like ESXi. The pvscsi driver provides a
substantial performance improvement in block devices versus
the emulated mpt and mps SCSI/SAS controllers.
Error handling in this driver has not been extensively tested
yet.
Submitted by: vbhakta@vmware.com
Relnotes: yes
Sponsored by: VMware, Panzura
Differential Revision: D18613
Disable the use of executable 2M page mappings in EPT-format page
tables on affected CPUs. For bhyve virtual machines, this effectively
disables all use of superpage mappings on affected CPUs. The
vm.pmap.allow_2m_x_ept sysctl can be set to override the default and
enable mappings on affected CPUs.
Alternate approaches have been suggested, but at present we do not
believe the complexity is warranted for typical bhyve's use cases.
Reviewed by: alc, emaste, markj, scottl
Security: CVE-2018-12207
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21884
Don't depend on CPUTYPE to define powerpcspe CFLAGS, they should be set
unconditionally. This reduces duplication. Also, set some CFLAGS as
gcc-only, because clang's SPE support always uses the SPE ABI, it's not an
optional feature.
Previously ntb_transport(4) required at least 6 scratchpad registers,
plus 2 more for each additional memory window. That is too much for some
configurations, where several drivers have to share resources of the same
NTB hardware. This patch introduces new compact version of the protocol,
requiring only 3 scratchpad registers, plus one more for each additional
memory window. The optimization is based on fact that neither of version,
number of windows or number of queue pairs really need more then one byte
each, and window sizes of 4GB are not very useful now. The new protocol
is activated automatically when the configuration is low on scratchpad
registers, or it can be activated explicitly with loader tunable.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Address Lookup Table (A-LUT) being enabled allows to specify separate
translation for each 1/128th or 1/256th of the BAR2. Previously it was
used only to limit effective window size by blocking access through some
of A-LUT elements. This change allows A-LUT elements to also point
different memory locations, providing to upper layers several (up to 128)
independent memory windows. A-LUT hardware allows even more flexible
configurations than this, but NTB KPI have no way to manage that now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
We will soon remove the BSD_CRTBEGIN option (and will use the new CRT
files always) as part of the GCC 4.2.1 removal. Right now BSD_CRTBEGIN
works everywhere but sparc64; add a reference to the PR in case anyone
stumbles across this and is looking for more information.
The man page incorrectly described the use of the"len" argument, which
is updated to the number of bytes copied and not reduced by the number
of bytes copied.
This is a content change.
Add some diagnostic output.
This works around the fact that buildworld calls cleandir in libexec
with the wrong MACHINE_ARCH (i386 on amd64) when the OBJ directory is empty.
Reported by: bdragon, jkim
Thanks to bapt, bz, cem, woodsb02, Neel Chauhan and Salvador Martínez
Mármol for helping test the initial 9000-series support.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Changes relative to r354449:
Correct detection of the compiler type when bsd.compat.mk is used
outside Makefile.libcompat. Previously it always matched the clang
case.
Set LDFLAGS including the linker emulation for mips where -m32 seems to
be insufficent.
Reviewed by: imp, kib (origional version in r354449)
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
GCC 4.2.1 is being removed before FreeBSD 13, as are some other
components required by FreeBSD/sparc64. Contemporary GCC does not build
and there is currently no indication that anyone is going to address
these issues.
PR: 228919, 233405, 236839, 239851
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Reviewed by: imp, kib
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
Postings were sent to -arch@ on 2019/09/13 and 2019/10/01, proposing and
confirming a removal of these scripts on 2019/10/31, due to significant work
needed to bring this into the modern world and nobody having done this work
in the past couple of years. No objections or proposed work was raised in
response to these postings. The tinyware may see a resurrection into a
separate repo for archival purposes if any users of it show interest in
doing so.
MFC after: never
The valectl(4) program is used to manage vale(4) switches.
Add it to the system commands so that it can be used right away.
This program was previously called vale-ctl, and stored in
tools/tools/netmap
Reviewed by: hrs, bcr, lwhsu, kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22146
Replace explicit TARGET_* variables with COMPAT_* versions defined based
on where the file is being included.
Also, require that bsd.compat.mk be included directly. It's not going to
be widely used so always loading it in bsd.prog.mk doesn't make sense.
Instead users can include it directly.
Reviewed by: imp, bdrewery (prior revision)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22059
The source part of the review will be addressed in a different way.
Reviewed by: emaste, brooks
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21492
Summary:
Historically, we have built toolchain components such as cc, ld, etc as
statically linked executables. One of the reasons being that you could
sometimes save yourself from botched upgrades, by e.g. recompiling a
"known good" libc and reinstalling it.
In this day and age, we have boot environments, virtual machine
snapshots, cloud backups, and other much more reliable methods to
restore systems to working order. So I think the time is ripe to flip
this default, and link the toolchain components dynamically, just like
almost all other executables on FreeBSD.
Maybe at some point they can even become PIE executables by default! :)
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22061
Notices appear both in picobsd(8) (near the top for easy notice) and are
also printed to stderr on every invocation of picobsd for visibility.
The tentative date for removal is October 31st, as no volunteers have
stepped forward at all from postings to -arch@ at least.
No objection from: -arch@
MFC after: 3 days
The change is for the example in textdump.4 and the default ddb.conf.
First of all, doadump now requires an argument and it won't do a
textdump if the argument is not 'true'.
And 'textdump dump' is more idiomatic anyway.
For what it's worth, ddb 'dump' command seems to always request a vmcore
dump even if a textdump was requested earlier, e.g., by 'textdump set'.
Finally, ddb 'call' command is not documented.
MFC after: 2 weeks
NetGDB(4) is a component of a system using a panic-time network stack to
remotely debug crashed FreeBSD kernels over the network, instead of
traditional serial interfaces.
There are three pieces in the complete NetGDB system.
First, a dedicated proxy server must be running to accept connections from
both NetGDB and gdb(1), and pass bidirectional traffic between the two
protocols.
Second, the NetGDB client is activated much like ordinary 'gdb' and
similarly to 'netdump' in ddb(4) after a panic. Like other debugnet(4)
clients (netdump(4)), the network interface on the route to the proxy server
must be online and support debugnet(4).
Finally, the remote (k)gdb(1) uses 'target remote <proxy>:<port>' (like any
other TCP remote) to connect to the proxy server.
The NetGDB v1 protocol speaks the literal GDB remote serial protocol, and
uses a 1:1 relationship between GDB packets and sequences of debugnet
packets (fragmented by MTU). There is no encryption utilized to keep
debugging sessions private, so this is only appropriate for local
segments or trusted networks.
Submitted by: John Reimer <john.reimer AT emc.com> (earlier version)
Discussed some with: emaste, markj
Relnotes: sure
Differential Revision: https://reviews.freebsd.org/D21568
Loosen requirements for connecting to debugnet-type servers. Only require a
destination address; the rest can theoretically be inferred from the routing
table.
Relax corresponding constraints in netdump(4) and move ifp validation to
debugnet connection time.
Submitted by: John Reimer <john.reimer AT emc.com> (earlier version)
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D21482
Add a 'X -s <server> -c <client> [-g <gateway>] -i <interface>' subroutine
to the generic debugnet code. The imagined use is both netdump, shown here,
and NetGDB (vaporware). It uses the ddb(4) lexer, with some new extensions,
to parse out IPv4 addresses.
'Netdump' uses the generic debugnet routine to load a configuration and
start a dump, without any netdump configuration prior to panic.
Loosely derived from work by: John Reimer <john.reimer AT emc.com>
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D21460
This allows to remove a bunch of low level code.
Also, superio(4) provides safer interaction with other drivers
that work with Super I/O configuration registers.
Tested only on PCengines APU2:
superio0: <Nuvoton NCT5104D/NCT6102D/NCT6106D (rev. B+)> at port 0x2e-0x2f on isa0
wbwd0: <Nuvoton NCT6102 (0xc4/0x53) Watchdog Timer> at WDT ldn 0x08 on superio0
The watchdog output is incorrectly wired on that system and the watchdog
does not really do it its job, but the pulse can be seen with a signal
analyzer.
Reviewed by: delphij, bcr (man page)
MFC after: 19 days
Differential Revision: https://reviews.freebsd.org/D21979
Linkage is controlled by two make knobs:
WANT_COMPAT - Prefer to link against the compat ABI.
NEED_COMPAT - Link against the compat ABI or fail to build.
Supported values are "32", "soft", and "any". The latter meaning pick
the first[0] supported compat ABI.
This can be used to provide test binaries for compat ABIs or to link
ABI-specific programs.
[0] We currently support only one compat ABI at a time, but this may
change in the future and some code in this commit is structured to ease
that change.
Reviewed by: bdrewery, jhb
Obtained from: CheriBSD (in concept)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22023
This will allow us to link against internal libraries when building
programs for the system's LIBCOMPAT ABI.
Reviewed by: bdrewery
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
This is the first step if refactoring the definitions to allow programs
to be selectively linked against libcompat libraries.
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
This adds basic documentation on what the superio driver is and how
other drivers can interact with it. I decided to also document
superio's ivar accessors.
Reviewed by: bcr, brueffer (both manual contents only)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21958
Add /i option for machine-parseable CSV output. This allows ready copy/
pasting into more sophisticated tooling outside of DDB.
Add total zone size ("Memory Use") as a new column for UMA.
For both, sort the displayed list on size (print the largest zones/types
first). This is handy for quickly diagnosing "where has my memory gone?" at
a high level.
Submitted by: Emily Pettigrew <Emily.Pettigrew AT isilon.com> (earlier version)
Sponsored by: Dell EMC Isilon
membar_producer is supposed to be a store-store barrier.
Also, in the code that FreeBSD has ported from illumos membar_producer
is used only with regular stores to regular memory (with respect to
caching).
We do not have an MI primitive for the store-store barrier, so
atomic_thread_fence_rel is the closest we have as it provides
(load | store) -> store barrier.
Previously, membar_producer was an empty function call on all 32-bit
arm-s, 32-bit powerpc, riscv and all mips variants. I think that it was
inadequate.
On other platforms, such as amd64, arm64, i386, powerpc64, sparc64,
membar_producer was implemented using stronger primitives than required
for a store-store barrier with respect to regular memory access.
For example, it used sfence on amd64 and lock-ed nop in i386 (despite TSO).
On powerpc64 we now use recommended lwsync instead of eieio.
On sparc64 FreeBSD uses TSO mode.
On arm64/aarch64 we now use dmb sy instead of dmb ish. Not sure if this
is an improvement, actually.
After this change we can drop opensolaris_atomic.S for aarch64, amd64,
powerpc64 and sparc64 as all required atomic operations have either
direct or light-weight mapping to FreeBSD native atomic operations.
Discussed with: kib
MFC after: 4 weeks
starting at the max. domain, and then work down. Then existing FreeBSD
drivers will attach. Interrupt routing from the VMD MSI-X to the NVME
drive is not well known, so any interrupt is sent to all children that
register.
VROC used Intel meta data so graid(8) works with it. However, graid(8)
supports RAID 0,1,10 for read and write. I have some early code to
support writes with RAID 5. Note that RAID 5 can have life issues
with SSDs since it can cause write amplification from updating the parity
data.
Hot plug support needs a change to skip the following check to work:
if (pcib_request_feature(dev, PCI_FEATURE_HP) != 0) {
in sys/dev/pci/pci_pci.c.
Looked at by: imp, rpokala, bcr
Differential Revision: https://reviews.freebsd.org/D21383
The new sysctl was not added to the siftr.4 man page at the time.
This updates the man page, and removes one left over trailing whitespace.
Submitted by: Richard Scheffenegger
Reviewed by: bcr@
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21619
This provides a framework to define a template describing
a set of "variables of interest" and the intended way for
the framework to maintain them (for example the maximum, sum,
t-digest, or a combination thereof). Afterwards the user
code feeds in the raw data, and the framework maintains
these variables inside a user-provided, opaque stats blobs.
The framework also provides a way to selectively extract the
stats from the blobs. The stats(3) framework can be used in
both userspace and the kernel.
See the stats(3) manual page for details.
This will be used by the upcoming TCP statistics gathering code,
https://reviews.freebsd.org/D20655.
The stats(3) framework is disabled by default for now, except
in the NOTES kernel (for QA); it is expected to be enabled
in amd64 GENERIC after a cool down period.
Reviewed by: sef (earlier version)
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20477
Diff partially stolen from CheriBSD; these bits need -Wl,-z,notext in order
to build in an LLVM world. They are needed for all flavors/sizes of MIPS.
This will eventually get fixed in LLVM, but it's unclear when.
Reported by: arichardson, emaste
Differential Revision: https://reviews.freebsd.org/D21696
At least some of the characters in E000-F8FF range are used by Powerline
fonts, and having no attributes for these ranges in UnicodeData.txt
other than "Other, Private Use" it should be safe to mark all of them as
printable. Some actually were before r340491, so this fixes the
regression introduced there as well.
PR: 240911
Reviewed by: bapt
Tested by: Daniel Ponte <amigan@gmail.com>
Differential Revision: https://reviews.freebsd.org/D21850
This change allows to specify a watchdog(9) timeout for a system
shutdown. The timeout is activated when the watchdogd daemon is
stopped. The idea is to a prevent any indefinite hang during late
stages of the shutdown. The feature is implemented in rc.d/watchdogd,
it builds upon watchdogd -x option.
Note that the shutdown timeout is not actiavted when the watchdogd
service is individually stopped by an operator. It is also not
activated for the 'shutdown' to the single-user mode. In those cases it
is assumed that the operator knows what they are doing and they have
means to recover the system should it hang.
Significant subchanges and implementation details:
- the argument to rc.shutdown, completely unused before, is assigned to
rc_shutdown variable that can be inspected by rc scripts
- init(8) passes "single" or "reboot" as the argument, this is not
changed
- the argument is not mandatory and if it is not set then rc_shutdown is
set to "unspecified"
- however, the default jail management scripts and jail configuration
examples have been updated to pass "jail" to rc.shutdown, just in case
- the new timeout can be set via watchdogd_shutdown_timeout rc option
- for consistency, the regular timeout can now be set via
watchdogd_timeout rc option
- watchdogd_shutdown_timeout and watchdogd_timeout override timeout
specifications in watchdogd_flags
- existing configurations, where the new rc options are not set, should
keep working as before
I am not particularly wed to any of the implementation specifics.
I am open to changing or removing any of them as long as the provided
functionality is the same (or very close) to the proposed one.
For example, I think it can be implemented without using watchdogd -x,
by means of watchdog(1) alone. In that case there would be a small
window between stopping watchdogd and running watchdog, but I think that
that is acceptable.
Reviewed by: bcr (man page changes)
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21221
can handle. Instead using an array on node private data, use per-hook
private data.
- Use NG_NODE_FOREACH_HOOK() to traverse through hooks instead of array.
PR: 240787
Submitted by: Lutz Donnerhacke <lutz donnerhacke.de>
Differential Revision: https://reviews.freebsd.org/D21803
GCC uses "dynamic" TLS models when -fpic or -fPIC is explicitly
specified on the command line (which is only true for shared libraries).
It uses "static" (or "exec") TLS models otherwise. In particular, GCC
does _not_ use dynamic TLS models when PIC is implicitly enabled (which
it is on MIPS), only if a PIC flag is explicitly provided.
llvm uses "dynamic" TLS models if PIC is enabled either via a PIC flag
or if it is implicily enabled (as on MIPS64). This means that llvm on
MIPS64 always uses "dynamic" TLS models. However, dynamic TLS models
do not work for static binaries and libraries as the __tls_get_addr
function they invoke is only defined in rtld.
Written by: jhb
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D21699
in mlx5core. The EEPROM information is not only a property of the
mlx5en(4) driver.
Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies
This setup will add the trusted certificates from the Mozilla NSS bundle
to base.
This commit includes:
- CAROOT option to opt out of installation of certs
- mtree amendments for final destinations
- infrastructure to fetch/update certs, along with instructions
A follow-up commit will add a certctl(8) utility to give the user control
over trust specifics. Another follow-up commit will actually commit the
initial result of updatecerts.
This work was done primarily by allanjude@, with minor contributions by
myself.
No objection from: secteam
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16856
STAGE_DIR.${${_${group}DIR_${file}}:C,[/*],_,g} was getting
${STAGE_OBJTOP}BINDIR rather than
${STAGE_OBJTOP}${BINDIR} when FILESDIR=BINDIR
Reviewed by: stevek
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21858
picobsd/tinyware has had this compact HTTPD server for a long time, and some
people do use it. Move it out into usr.sbin well in advance of any action
being taken on picobsd.
This has been gated behind an HTTPD option defaulted to *off*, primarily for
two reasons:
1.) This code likely needs a good audit, as it's been living off in picobsd
land for a long time, and
2.) We don't currently ship an httpd and this may not be a welcome surprise.
Reviewed by: eugen
Differential Revision: https://reviews.freebsd.org/D21724
and reinserting it back with an updated key.
This is one of dependencies for the upcoming stats(3) code.
Reviewed by: cem
Obtained from: Netflix
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D21786
Summary: When powerpc64 switches to LLVM, use this patch to enable
OpenMP as well. OpenMP on PPC is only for 64-bits, so don't make a
32-bit libomp. A change to openmp files is necesssary (under review on
https://reviews.llvm.org/D67190), because it determines ELF format
version based on endianness, which is incorrect.
Reviewed by: alfredo.junior_eldorado.org.br, #manpages
Differential Revision: https://reviews.freebsd.org/D21532
chflags -R on it, otherwise the command will error out. (Note that
adding -f to the chflags invocation does not help, unlike with rm.)
MFC after: 3 days
Parts of the fusefs tests trigger a bug in current versions of llvm: IR
representation of some routine for the MIPS targets is a function with a
large number of arguments. This then leads the compiler on an hour+ long
goose chase, which is OK if you build the current tree but less-so if you're
trying external toolchain or doing a universe build involving mips when it
eventually gets switched over to LLVM.
Better, accurate details can be found in LLVM PR43263.
has become very trigger-happy with libc++ 9.0.0.
It does not help that gcc's implementation of this warning is even more
trigger-happy, in the sense that it already warns on the declaration
itself, not when you are using it. This is very annoying with our use
of -Wsystem-headers. That should really be disabled for gcc.
- Remove a dead variable from the amd64 pmap_extract_and_hold().
- Fix grammar in the vm_page_wire man page.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
- Remove a dead variable from the amd64 pmap_extract_and_hold().
- Fix grammar in the vm_page_wire man page.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
to the traditional tree(3) RB trees, but using an array (preallocated,
linear chunk of memory) to store the tree.
This avoids allocation overhead, improves memory locality,
and makes it trivially easy to share/transfer/copy the entire tree
without the need for marshalling. The downside is that the size
is fixed at initialization time; there is no mechanism to resize
it.
This is one of the dependencies for the new stats(3) framework
(https://reviews.freebsd.org/D20477).
Reviewed by: bcr (man pages), markj
Discussed with: cem
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Obtained from: Netflix
Differential Revision: https://reviews.freebsd.org/D20324
