commit 81edd3e834
Author: Peng <peng.hse@xtaotech.com>
Date: Wed Jun 8 15:22:07 2016 +0800
Fix PANIC: metaslab_free_dva(): bad DVA X:Y:Z
The following scenario can result in garbage in the dn_spill field.
The db->db_blkptr must be set to NULL when DNODE_FLAG_SPILL_BLKPTR
is clear to ensure the dn_spill field is cleared.
Current txg = A.
* A new spill buffer is created. Its dbuf is initialized with
db_blkptr = NULL and it's dirtied.
Current txg = B.
* The spill buffer is modified. It's marked as dirty in this txg.
* Additional changes make the spill buffer unnecessary because the
xattr fits into the bonus buffer, so it's removed. The dbuf is
undirtied in this txg, but it's still referenced and cannot be
destroyed.
Current txg = C.
* Starts syncing of txg A
* dbuf_sync_leaf() is called for the spill buffer. Since db_blkptr
is NULL, dbuf_check_blkptr() is called.
* The dbuf starts being written and it reaches the ready state
(not done yet).
* A new change makes the spill buffer necessary again.
sa_build_layouts() ends up calling dbuf_find() to locate the
dbuf. It finds the old dbuf because it has not been destroyed yet
(it will be destroyed when the previous write is done and there
are no more references). The old dbuf has db_blkptr != NULL.
* txg A write is complete and the dbuf released. However it's still
referenced, so it's not destroyed.
Current txg = D.
* Starts syncing of txg B
* dbuf_sync_leaf() is called for the bonus buffer. Its contents are
directly copied into the dnode, overwriting the blkptr area because,
in txg B, the bonus buffer was big enough to hold the entire xattr.
* At this point, the db_blkptr of the spill buffer used in txg C
gets corrupted.
Signed-off-by: Peng <peng.hse@xtaotech.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3937
NB: disabled pending the addition of KSTAT_TYPE_RAW support to the
SPL
commit e0b0ca983d
Author: Brian Behlendorf <behlendorf1@llnl.gov>
Date: Wed Oct 2 17:11:19 2013 -0700
Add visibility in to cached dbufs
Currently there is no mechanism to inspect which dbufs are being
cached by the system. There are some coarse counters in arcstats
by they only give a rough idea of what's being cached. This patch
aims to improve the current situation by adding a new dbufs kstat.
When read this new kstat will walk all cached dbufs linked in to
the dbuf_hash. For each dbuf it will dump detailed information
about the buffer. It will also dump additional information about
the referenced arc buffer and its related dnode. This provides a
more complete view in to exactly what is being cached.
With this generic infrastructure in place utilities can be written
to post-process the data to understand exactly how the caching is
working. For example, the data could be processed to show a list
of all cached dnodes and how much space they're consuming. Or a
similar list could be generated based on dnode type. Many other
ways to interpret the data exist based on what kinds of questions
you're trying to answer.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
commit 50c957f702
Author: Ned Bass <bass6@llnl.gov>
Date: Wed Mar 16 18:25:34 2016 -0700
Implement large_dnode pool feature
Justification
-------------
This feature adds support for variable length dnodes. Our motivation is
to eliminate the overhead associated with using spill blocks. Spill
blocks are used to store system attribute data (i.e. file metadata) that
does not fit in the dnode's bonus buffer. By allowing a larger bonus
buffer area the use of a spill block can be avoided. Spill blocks
potentially incur an additional read I/O for every dnode in a dnode
block. As a worst case example, reading 32 dnodes from a 16k dnode block
and all of the spill blocks could issue 33 separate reads. Now suppose
those dnodes have size 1024 and therefore don't need spill blocks. Then
the worst case number of blocks read is reduced to from 33 to two--one
per dnode block. In practice spill blocks may tend to be co-located on
disk with the dnode blocks so the reduction in I/O would not be this
drastic. In a badly fragmented pool, however, the improvement could be
significant.
ZFS-on-Linux systems that make heavy use of extended attributes would
benefit from this feature. In particular, ZFS-on-Linux supports the
xattr=sa dataset property which allows file extended attribute data
to be stored in the dnode bonus buffer as an alternative to the
traditional directory-based format. Workloads such as SELinux and the
Lustre distributed filesystem often store enough xattr data to force
spill bocks when xattr=sa is in effect. Large dnodes may therefore
provide a performance benefit to such systems.
Other use cases that may benefit from this feature include files with
large ACLs and symbolic links with long target names. Furthermore,
this feature may be desirable on other platforms in case future
applications or features are developed that could make use of a
larger bonus buffer area.
Implementation
--------------
The size of a dnode may be a multiple of 512 bytes up to the size of
a dnode block (currently 16384 bytes). A dn_extra_slots field was
added to the current on-disk dnode_phys_t structure to describe the
size of the physical dnode on disk. The 8 bits for this field were
taken from the zero filled dn_pad2 field. The field represents how
many "extra" dnode_phys_t slots a dnode consumes in its dnode block.
This convention results in a value of 0 for 512 byte dnodes which
preserves on-disk format compatibility with older software.
Similarly, the in-memory dnode_t structure has a new dn_num_slots field
to represent the total number of dnode_phys_t slots consumed on disk.
Thus dn->dn_num_slots is 1 greater than the corresponding
dnp->dn_extra_slots. This difference in convention was adopted
because, unlike on-disk structures, backward compatibility is not a
concern for in-memory objects, so we used a more natural way to
represent size for a dnode_t.
The default size for newly created dnodes is determined by the value of
a new "dnodesize" dataset property. By default the property is set to
"legacy" which is compatible with older software. Setting the property
to "auto" will allow the filesystem to choose the most suitable dnode
size. Currently this just sets the default dnode size to 1k, but future
code improvements could dynamically choose a size based on observed
workload patterns. Dnodes of varying sizes can coexist within the same
dataset and even within the same dnode block. For example, to enable
automatically-sized dnodes, run
# zfs set dnodesize=auto tank/fish
The user can also specify literal values for the dnodesize property.
These are currently limited to powers of two from 1k to 16k. The
power-of-2 limitation is only for simplicity of the user interface.
Internally the implementation can handle any multiple of 512 up to 16k,
and consumers of the DMU API can specify any legal dnode value.
The size of a new dnode is determined at object allocation time and
stored as a new field in the znode in-memory structure. New DMU
interfaces are added to allow the consumer to specify the dnode size
that a newly allocated object should use. Existing interfaces are
unchanged to avoid having to update every call site and to preserve
compatibility with external consumers such as Lustre. The new
interfaces names are given below. The versions of these functions that
don't take a dnodesize parameter now just call the _dnsize() versions
with a dnodesize of 0, which means use the legacy dnode size.
New DMU interfaces:
dmu_object_alloc_dnsize()
dmu_object_claim_dnsize()
dmu_object_reclaim_dnsize()
New ZAP interfaces:
zap_create_dnsize()
zap_create_norm_dnsize()
zap_create_flags_dnsize()
zap_create_claim_norm_dnsize()
zap_create_link_dnsize()
The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The
spa_maxdnodesize() function should be used to determine the maximum
bonus length for a pool.
These are a few noteworthy changes to key functions:
* The prototype for dnode_hold_impl() now takes a "slots" parameter.
When the DNODE_MUST_BE_FREE flag is set, this parameter is used to
ensure the hole at the specified object offset is large enough to
hold the dnode being created. The slots parameter is also used
to ensure a dnode does not span multiple dnode blocks. In both of
these cases, if a failure occurs, ENOSPC is returned. Keep in mind,
these failure cases are only possible when using DNODE_MUST_BE_FREE.
If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0.
dnode_hold_impl() will check if the requested dnode is already
consumed as an extra dnode slot by an large dnode, in which case
it returns ENOENT.
* The function dmu_object_alloc() advances to the next dnode block
if dnode_hold_impl() returns an error for a requested object.
This is because the beginning of the next dnode block is the only
location it can safely assume to either be a hole or a valid
starting point for a dnode.
* dnode_next_offset_level() and other functions that iterate
through dnode blocks may no longer use a simple array indexing
scheme. These now use the current dnode's dn_num_slots field to
advance to the next dnode in the block. This is to ensure we
properly skip the current dnode's bonus area and don't interpret it
as a valid dnode.
zdb
---
The zdb command was updated to display a dnode's size under the
"dnsize" column when the object is dumped.
For ZIL create log records, zdb will now display the slot count for
the object.
ztest
-----
Ztest chooses a random dnodesize for every newly created object. The
random distribution is more heavily weighted toward small dnodes to
better simulate real-world datasets.
Unused bonus buffer space is filled with non-zero values computed from
the object number, dataset id, offset, and generation number. This
helps ensure that the dnode traversal code properly skips the interior
regions of large dnodes, and that these interior regions are not
overwritten by data belonging to other dnodes. A new test visits each
object in a dataset. It verifies that the actual dnode size matches what
was stored in the ztest block tag when it was created. It also verifies
that the unused bonus buffer space is filled with the expected data
patterns.
ZFS Test Suite
--------------
Added six new large dnode-specific tests, and integrated the dnodesize
property into existing tests for zfs allow and send/recv.
Send/Receive
------------
ZFS send streams for datasets containing large dnodes cannot be received
on pools that don't support the large_dnode feature. A send stream with
large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be
unrecognized by an incompatible receiving pool so that the zfs receive
will fail gracefully.
While not implemented here, it may be possible to generate a
backward-compatible send stream from a dataset containing large
dnodes. The implementation may be tricky, however, because the send
object record for a large dnode would need to be resized to a 512
byte dnode, possibly kicking in a spill block in the process. This
means we would need to construct a new SA layout and possibly
register it in the SA layout object. The SA layout is normally just
sent as an ordinary object record. But if we are constructing new
layouts while generating the send stream we'd have to build the SA
layout object dynamically and send it at the end of the stream.
For sending and receiving between pools that do support large dnodes,
the drr_object send record type is extended with a new field to store
the dnode slot count. This field was repurposed from unused padding
in the structure.
ZIL Replay
----------
The dnode slot count is stored in the uppermost 8 bits of the lr_foid
field. The bits were unused as the object id is currently capped at
48 bits.
Resizing Dnodes
---------------
It should be possible to resize a dnode when it is dirtied if the
current dnodesize dataset property differs from the dnode's size, but
this functionality is not currently implemented. Clearly a dnode can
only grow if there are sufficient contiguous unused slots in the
dnode block, but it should always be possible to shrink a dnode.
Growing dnodes may be useful to reduce fragmentation in a pool with
many spill blocks in use. Shrinking dnodes may be useful to allow
sending a dataset to a pool that doesn't support the large_dnode
feature.
Feature Reference Counting
--------------------------
The reference count for the large_dnode pool feature tracks the
number of datasets that have ever contained a dnode of size larger
than 512 bytes. The first time a large dnode is created in a dataset
the dataset is converted to an extensible dataset. This is a one-way
operation and the only way to decrement the feature count is to
destroy the dataset, even if the dataset no longer contains any large
dnodes. The complexity of reference counting on a per-dnode basis was
too high, so we chose to track it on a per-dataset basis similarly to
the large_block feature.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3542
Taken from:
ommit f604673836
Author: Brian Behlendorf <behlendorf1@llnl.gov>
Date: Sat May 30 09:57:53 2015 -0500
Make arc_prune() asynchronous
As described in the comment above arc_adapt_thread() it is critical
that the arc_adapt_thread() function never sleep while holding a hash
lock. This behavior was possible in the Linux implementation because
the arc_prune() logic was implemented to be synchronous. Under
illumos the analogous dnlc_reduce_cache() function is asynchronous.
To address this the arc_do_user_prune() function is has been reworked
in to two new functions as follows:
* arc_prune_async() is an asynchronous implementation which dispatches
the prune callback to be run by the system taskq. This makes it
suitable to use in the context of the arc_adapt_thread().
* arc_prune() is a synchronous implementation which depends on the
arc_prune_async() implementation but blocks until the outstanding
callbacks complete. This is used in arc_kmem_reap_now() where it
is safe, and expected, that memory will be freed.
This patch additionally adds the zfs_arc_meta_strategy module option
while allows the meta reclaim strategy to be configured. It defaults
to a balanced strategy which has been proved to work well under Linux
but the illumos meta-only strategy can be enabled.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In addition import most recent arc_prune_async implementation as dependency
commit 25458cbef9
Author: Tim Chase <tim@chase2k.com>
Date: Wed Jul 13 07:42:40 2016 -0500
Limit the amount of dnode metadata in the ARC
Metadata-intensive workloads can cause the ARC to become permanently
filled with dnode_t objects as they're pinned by the VFS layer.
Subsequent data-intensive workloads may only benefit from about
25% of the potential ARC (arc_c_max - arc_meta_limit).
In order to help track metadata usage more precisely, the other_size
metadata arcstat has replaced with dbuf_size, dnode_size and bonus_size.
The new zfs_arc_dnode_limit tunable, which defaults to 10% of
zfs_arc_meta_limit, defines the minimum number of bytes which is desirable
to be consumed by dnodes. Attempts to evict non-metadata will trigger
async prune tasks if the space used by dnodes exceeds this limit.
The new zfs_arc_dnode_reduce_percent tunable specifies the amount by
which the excess dnode space is attempted to be pruned as a percentage of
the amount by which zfs_arc_dnode_limit is being exceeded. By default,
it tries to unpin 10% of the dnodes.
The problem of dnode metadata pinning was observed with the following
testing procedure (in this example, zfs_arc_max is set to 4GiB):
- Create a large number of small files until arc_meta_used exceeds
arc_meta_limit (3GiB with default tuning) and arc_prune
starts increasing.
- Create a 3GiB file with dd. Observe arc_mata_used. It will still
be around 3GiB.
- Repeatedly read the 3GiB file and observe arc_meta_limit as before.
It will continue to stay around 3GiB.
With this modification, space for the 3GiB file is gradually made
available as subsequent demands on the ARC are made. The previous behavior
can be restored by setting zfs_arc_dnode_limit to the same value as the
zfs_arc_meta_limit.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4345
Issue #4512
Issue #4773Closes#4858
commit 417104bdd3
Author: Ned Bass <bass6@llnl.gov>
Date: Thu Feb 26 12:24:11 2015 -0800
Use cached feature info in spa_add_feature_stats()
Avoid issuing I/O to the pool when retrieving feature flags information.
Trying to read the ZAPs from disk means that zpool clear would hang if
the pool is suspended and recovery would require a reboot. To keep the
feature stats resident in memory, we hang a cached nvlist off of the
spa. It is built up from disk the first time spa_add_feature_stats() is
called, and refreshed thereafter using the cached feature reference
counts. spa_add_feature_stats() gets called at pool import time so we
can be sure the cached nvlist will be available if the pool is later
suspended.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3082
MFV:
commit ee36c709c3
Author: Gvozden Neskovic <neskovic@gmail.com>
Date: Sat Aug 27 20:12:53 2016 +0200
perf: 2.75x faster ddt_entry_compare()
First 256bits of ddt_key_t is a block checksum, which are expected
to be close to random data. Hence, on average, comparison only needs to
look at first few bytes of the keys. To reduce number of conditional
jump instructions, the result is computed as: sign(memcmp(k1, k2)).
Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} ,
which is computed efficiently. Synthetic performance evaluation of
original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R)
CPU E5-2660 v3:
old 6.85789 s
new 2.49089 s
perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare()
Compute the result directly instead of using conditionals
perf: zfs_range_compare()
Speedup between 1.1x - 2.5x, depending on compiler version and
optimization level.
perf: spa_error_entry_compare()
`bcmp()` is not suitable for comparator use. Use `memcmp()` instead.
perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare()
perf: 2.8x faster zil_bp_compare()
perf: 2.8x faster mze_compare()
perf: faster dbuf_compare()
perf: faster compares in spa_misc
perf: 2.8x faster layout_hash_compare()
perf: 2.8x faster space_reftree_compare()
perf: libzfs: faster avl tree comparators
perf: guid_compare()
perf: dsl_deadlist_compare()
perf: perm_set_compare()
perf: 2x faster range_tree_seg_compare()
perf: faster unique_compare()
perf: faster vdev_cache _compare()
perf: faster vdev_uberblock_compare()
perf: faster fuid _compare()
perf: faster zfs_znode_hold_compare()
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Richard Elling <richard.elling@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5033
When doing a read from disk, ZFS creates 3 ZIO's: a zio_null(), the
logical zio_read(), and then a physical zio. Currently, each of these
results in a separate taskq_dispatch(zio_execute).
On high-read-iops workloads, this causes a significant performance
impact. By processing all 3 ZIO's in a single taskq entry, we reduce the
overhead on taskq locking and context switching. We accomplish this by
allowing zio_done() to return a "next zio to execute" to zio_execute().
This results in a ~12% performance increase for random reads, from
96,000 iops to 108,000 iops (with recordsize=8k, on SSD's).
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
External-issue: DLPX-59292
Closes#7736zfsonlinux/zfs@62840030a7
9580 Add a hash-table on top of nvlist to speed-up operations
illumos/illumos-gate@2ec7644aab
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
illumos/illumos-gate@843c2111b1
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@48dd5e630c
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9ca527c3d3
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9465 ARC check for 'anon_size > arc_c/2' can stall the system
illumos/illumos-gate@abe1fd01ce
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Don Brady <don.brady@delphix.com>
The zfs_dbuf_evict_key TSD (thread-specific data) is not necessary - we can
instead pass a flag down in a few places to prevent recursive dbuf eviction.
Making this change has 3 benefits:
1. The code semantics are easier to understand.
2. On Linux, performance is improved, because creating/removing TSD values
(by setting to NULL vs non-NULL) is expensive, and we do it very often.
3. According to Nexenta, the current semantics can cause a deadlock when
concurrently calling dmu_objset_evict_dbufs() (which is rare today, but they
are working on a "parallel unmount" change that triggers this more easily)
illumos/illumos-gate@c2919acbea
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
indirect vdevs that have been historically expanded
illumos/illumos-gate@11f6a9680e
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
illumos/illumos-gate@99a19144e8
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9438 Holes can lose birth time info if a block has a mix of birth times
Ultimately, the problem here is that when you truncate and write a file in
the same transaction group, the dbuf for the indirect block will be zeroed
out to deal with the truncation, and then written for the write. During
this process, we will lose hole birth time information for any holes in the
range. In the case where a dnode is being freed, we need to determine
whether the block should be converted to a higher-level hole in the zio
pipeline, and if so do it when the dnode is being synced out.
illumos/illumos-gate@738e2a3ce3
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@dec267e7ea
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9424 ztest failure: "unprotected error in call to Lua API (Invalid value type 'f
unction' for key 'error')"
illumos/illumos-gate@fe3ba4d122
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
In the most fragmented real-world cases, this reduces memory used by the
mapping from ~1GB to ~50MB of RAM per 1TB of storage removed. Less
fragmented cases will typically also see around 50-100MB of RAM per 1TB
of storage.
illumos/illumos-gate@cfd63e1b1b
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
Datasets that are deeply nested (~100 levels) are impractical. We just put
a limit of 50 levels to newly created datasets. Existing datasets should
work without a problem.
illumos/illumos-gate@5ac95da7d6
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Continues what was started in 7801 add more by-dnode routines by fully
converting zvols to avoid unnecessary dnode_hold() calls. This saves a
small amount of CPU time and slightly improves latencies of operations
on zvols.
illumos/illumos-gate@8dfe5547fb
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Rick McNeal <rick.mcneal@nexenta.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Richard Yao <richard.yao@prophetstor.com>
All objects after the last written or freed object are not supposed to
exist after receiving the stream. We should free them accordingly, as if
a freeobjects record for them had been included in the stream.
zfsonlinux/zfs@48fbb9ddbfillumos/illumos-gate@7864b8192b
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
9464 txg_kick() fails to see that we are quiescing, forcing transactions
to their next stages without leaving them accumulate changes
Ideally we would like txg_kick() to get triggered only when we are sure
that we are not syncing AND not quiescing any txg. This way we can kick
an open TXG to the quiescing state when we are sure that there is nothing
going on and we would benefit from the different states running
concurrently.
illumos/illumos-gate@fa41d87de9
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
Updates to indirect blocks of spacemaps can contribute significantly to
write inflation. Therefore we want to reduce the indirect block size of
spacemaps from 128K to 16K.
illumos/illumos-gate@221813c13b
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Albert Lee <trisk@forkgnu.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9426 metaslab size can exceed offset addressable by spacemap
metaslab size can exceed offset addressable by spacemap. The vdev can
address up to 2^63 * SPA_MAXBLOCKSIZE (512). A metaslab can address up to
2^47 * 2^vdev_ashift. Therefore we may need to increase the number of
metaslabs so that the maximum metaslab size is capped at the amount that
can be addressed by the spacemap. This should happen in
vdev_metaslab_set_size().
illumos/illumos-gate@b4bf0cf045
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Don Brady <don.brady@delphix.com>
9328 zap code can take advantage of c99
9329 panic in zap_leaf_lookup() due to concurrent zapification
illumos/illumos-gate@bf26014c55
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9403 assertion failed in arc_buf_destroy() when concurrently reading block with checksum error
This assertion (VERIFY) failure was reported when reading a block. Turns out
the problem is that if we get an i/o error (ECKSUM in this case), and there
are multiple concurrent ARC reads of the same block (from different clones),
then the ARC will put multiple buf's on the same ANON hdr, which isn't
supposed to happen, and then causes a panic when we try to arc_buf_destroy()
the buf.
illumos/illumos-gate@fa98e487a9
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Matthew Ahrens <mahrens@delphix.com>
9421 zdb should detect and print out the number of "leaked" objects
9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue
illumos/illumos-gate@20b5dafb42
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
9102 zfs should be able to initialize storage devices
The first access to a disk block can incur a performance penalty on some
platforms (e.g. AWS's EBS, VMware VMDKs). Therefore it is recommended that
volumes be "thick provisioned", where supported by the platform (VMware).
Thick provisioning is time consuming and often is ignored. If the thick
provision step is omitted, customers will see suboptimal performance until
we have written to all parts of the LUN. ZFS should be able to initialize
any unused storage to remove any first-write penalty that exists.
illumos/illumos-gate@094e47e980
Reviewed by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
illumos/illummos-gate@df477c0afa
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
This project's goal is to make read-heavy channel programs and zfs(1m)
administrative commands faster by caching all the metadata that they will
need in the dbuf layer. This will prevent the data from being evicted, so
that any future call to i.e. zfs get all won't have to go to disk (very
much).
illumos/illumos-gate@adb52d9262
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least,
metaslab_condense() should call zfs_dbgmsg because it's important and rare
enough to always log. It's possible that the message in zio_dva_allocate()
would be too high-frequency for zfs_dbgmsg.
illumos/illumos-gate@21f7c81cc1
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Currently vdev_label_sync and vdev_uberblock_sync take a zio_t and assume
that its io_private is a pointer to the good_writes count. They should
instead accept this argument explicitly.
illumos/illumos-gate@a3b5583021
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Mirrors are supposed to provide redundancy in the face of whole-disk failure
and silent damage (e.g. some data on disk is not right, but ZFS hasn't
detected the whole device as being broken). However, the current device
removal implementation bypasses some of the mirror's redundancy.
illumos/illumos-gate@3a4b1be953
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
On high-end systems running async sequential write workloads, especially
NUMA systems with flash or NVMe storage, one significant performance
bottleneck is selecting a metaslab to do allocations from. This process
can be parallelized, providing significant performance increases for
these workloads.
illumos/illumos-gate@f78cdc34af
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Paul Dagnelie <pcd@delphix.com>
The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
device removal, zpool checkpoint) we've started imposing limits in the
vdevs that can be used with them based on the maximum addressable offset
(currently 64PB for a top-level vdev).
The new remains backwards compatible with the old one. The introduced
two-word entry format, besides extending the limits imposed by the single-entry
layout, also includes a vdev field and some extra padding after its prefix.
The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps.
One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and
we wanted to fit the vdev field in the space map. In addition that gives us
some extra bits in dva_t.
illumos/illumos-gate@17f11284b4
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
illumos/illumos-gate@b6bf6e1540
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
(r334844). Most of the changes involve moving some code around to
reduce conflicts with future merges. One of the missing changes
included a notification on scrub cancellation.
Approved by: mav
Sponsored by: iXsystems Inc
quatactl(2) mechanism. (Read-only at this point, however.)
In particular, this is to allow rpc.rquotad query quotas
for NFS mounts, allowing users to see their quotas on the
hosts using the datasets.
The changes specifically:
* Add new RPC entry points for querying quotas.
* Changes the library routines to allow non-UFS quotas.
* Changes rquotad to check for quotas on mounted filesystems,
rather than being limited to entries in /etc/fstab
* Lastly, adds a VFS entry-point for ZFS to query quotas.
Note that this makes one unavoidable behavioural change: if quotas
are enabled, then they can be queried, as opposed to the current
method of checking for quotas being specified in fstab. (With
ZFS, if there are user or group quotas, they're used, always.)
Reviewed by: delphij, mav
Approved by: mav
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D15886
d4a72f2386
During scans (scrubs or resilvers), it sorts the blocks in each transaction
group by block offset; the result can be a significant improvement. (On my
test system just now, which I put some effort to introduce fragmentation into
the pool since I set it up yesterday, a scrub went from 1h2m to 33.5m with the
changes.) I've seen similar rations on production systems.
Approved by: Alexander Motin
Obtained from: ZFS On Linux
Relnotes: Yes (improved scrub performance, with tunables)
Differential Revision: https://reviews.freebsd.org/D15562
When we're at our vnode limit, getnewvnode will call into the vnode LRU
cache to free up vnodes. If the vnode we try to recycle is a ZFS vnode we
end up, eventually, in zfs_rmnode. If the ZFS vnode we're recycling
represents something with extended attributes, zfs_rmnode will call
zfs_zget which will attempt to allocate another vnode. If the next vnode we
try to recycle is also a ZFS vnode representing something with extended
attributes we can recurse further. This ends up being unbounded and can end
up overflowing the stack.
In order to avoid this, restructure zfs_rmnode to simply add the extended
attribute directory's object ID to the unlinked set, thus not requiring the
allocation of a vnode. We then schedule a task that calls zfs_unlinked_drain
which will do the work of properly marking the vnodes for unlinking.
zfs_unlinked_drain is also called on mount so these will be cleaned up
there.
Reviewed by: avg, mav
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15342
Even though there do appear to be more artificial frames, with 12, stack
traces no longer list at all. Revert until a better, more stable value can
be determined.
The 64-bit atomics defined for i386 are currently only available in
the kernel space.
Found by: cy@
MFC after: 1 week
Sponsored by: Mellanox Technologies
While at it add missing _acq_ and _rel_ variants for 64-bit atomic
operations under i386.
Reviewed by: kib @
MFC after: 1 week
Sponsored by: Mellanox Technologies
It turns out that sendfile_swapin() has an optimization where it may
insert pointers to bogus_page into the page array that it passes to
VOP_GETPAGES. That happens to work with buffer cache, because it
extensively uses bogus_page internally, so it has the necessary checks.
However, ZFS did not expect bogus_page as VOP_GETPAGES(9) does not
document such a (ab)use of bogus_page.
So, this commit adds checks and handling of bogus_page.
I expect that use of bogus_page with VOP_GETPAGES will get documented
sooner rather than later.
Reported by: Andrew Reilly <areilly@bigpond.net.au>, delphij
Tested by: Andrew Reilly <areilly@bigpond.net.au>
Requested by: many
MFC after: 1 week
Creating a pool with a temporary name fails when we also specify custom
dataset properties: this is because we mistakenly call
zfs_set_prop_nvlist() on the "real" pool name which, as expected,
cannot be found because the SPA is present in the namespace with the
temporary name.
Fix this by specifying the correct pool name when setting the dataset
properties.
Author: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Obtained from: ZFS on Linux, zfsonlinux/zfs@4ceb8dd6fd
MFC after: 1 week
unwind_frame() may be instrumented by FBT, leading to recursion into
dtrace_probe(). Manually inline unwind_frame() as we do with stack
unwinding code for other architectures.
Submitted by: Domagoj Stolfa
Reviewed by: manu
MFC after: 1 week
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D15359
- Add macros to allow preinitialization of cap_rights_t.
- Convert most commonly used code paths to use preinitialized cap_rights_t.
A 3.6% speedup in fstat was measured with this change.
Reported by: mjg
Reviewed by: oshogbo
Approved by: sbruno
MFC after: 1 month
by doing most of the work in a new function prison_add_vfs in kern_jail.c
Now a jail-enabled filesystem need only mark itself with VFCF_JAIL, and
the rest is taken care of. This includes adding a jail parameter like
allow.mount.foofs, and a sysctl like security.jail.mount_foofs_allowed.
Both of these used to be a static list of known filesystems, with
predefined permission bits.
Reviewed by: kib
Differential Revision: D14681
While here predict false.
Note the code is wrong (regardless of this change). Dereference of the
pointer can race with module unload. A fix would set the probe to a
nop stub instead of NULL.
Each malloc/free was testing dtrace_malloc_enabled and forcing
extra reads from the malloc type struct to see if perhaps a
dtmalloc probe was on.
Treat it like lockstat and sdt: have a global bolean.
When the compressed ARC feature was added in commit d3c2ae1
the method of reference counting in the ARC was modified. As
part of this accounting change the arc_buf_add_ref() function
was removed entirely.
This would have be fine but the arc_buf_add_ref() function
served a second undocumented purpose of updating the ARC access
information when taking a hold on a dbuf. Without this logic
in place a cached dbuf would not migrate its associated
arc_buf_hdr_t to the MFU list. This would negatively impact
the ARC hit rate, particularly on systems with a small ARC.
This change reinstates the missing call to arc_access() from
dbuf_hold() by implementing a new arc_buf_access() function.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The change adds -t <name> option to zpool create and -t option to zpool
import in its form with an old name and a new name. This allows to
import (or create) a pool under a name that's different from its real,
permanent name without affecting that name. This is useful when working
with VM images or images of other physical systems if they happen to
have a ZFS pool with the same name as the host system.
The changes come from ZoL with some small tweaks.
The porting has been done by julian.
The change is being submitted to OpenZFS:
https://github.com/openzfs/openzfs/pull/600
Submitted by: julian
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: Panzura (porting)
Differential Revision: https://reviews.freebsd.org/D14972
Page daemon output is now regulated by a PID controller with a setpoint
of v_free_target. Moreover, the page daemon now wakes up regularly
rather than waiting for a wakeup from another thread. This means that
the free page count is unlikely to drop below the old
zfs_arc_free_target value, and as a result the ARC was not readily
freeing pages under memory pressure. Address the immediate problem by
updating zfs_arc_free_target to match the page daemon's new behaviour.
Reported and tested by: truckman
Discussed with: jeff
X-MFC with: r329882
Differential Revision: https://reviews.freebsd.org/D14994
This helps catch cases where an instrumented function is called while
in probe context.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
MFC after: 2 weeks
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D14863
Device removal code does not set spa_indirect_vdevs_loaded for pools
that never experienced device removal. At least one visual consequence
of it is completely blocked speculative prefetcher. This patch sets
the variable in such situations.
9280 Assertion failure while running removal_with_ganging test with 4K devices
illumos/illumos-gate@243952c7ee
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matt Ahrens <Matt.Ahrens@delphix.com>
9188 increase size of dbuf cache to reduce indirect block decompression
illumos/illumos-gate@268bbb2a2f
With compressed ARC (6950) we use up to 25% of our CPU to decompress indirect
blocks, under a workload of random cached reads. To reduce this decompression
cost, we would like to increase the size of the dbuf cache so that more
indirect blocks can be stored uncompressed.
If we are caching entire large files of recordsize=8K, the indirect blocks
use 1/64th as much memory as the data blocks (assuming they have the same
compression ratio). We suggest making the dbuf cache be 1/32nd of all memory,
so that in this scenario we should be able to keep all the indirect blocks
decompressed in the dbuf cache. (We want it to be more than the 1/64th that
the indirect blocks would use because we need to cache other stuff in the
dbuf cache as well.)
In real world workloads, this won't help as dramatically as the example
above, but we think it's still worth it because the risk of decreasing
performance is low. The potential negative performance impact is that we
will be slightly reducing the size of the ARC (by ~3%).
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Sanjay Nadkarni <sanjay.nadkarni@nexenta.com>
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: George Wilson <george.wilson@delphix.com>
9321 arc_loan_compressed_buf() can increment arc_loaned_bytes by the wrong value
illumos/illumos-gate@9be12bd737
arc_loan_compressed_buf() increments arc_loaned_bytes by psize unconditionally
In the case of zfs_compressed_arc_enabled=0, when the buf is returned via
arc_return_buf(), if ARC_BUF_COMPRESSED(buf) is false, then arc_loaned_bytes
is decremented by lsize, not psize.
Switch to using arc_buf_size(buf), instead of psize, which will return
psize or lsize, depending on the result of ARC_BUF_COMPRESSED(buf).
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Allan Jude <allanjude@freebsd.org>
9235 rename zpool_rewind_policy_t to zpool_load_policy_t
illumos/illumos-gate@5dafeea3eb
We want to be able to pass various settings during import/open of a pool,
which are not only related to rewind. Instead of adding a new policy and
duplicate a bunch of code, we should just rename rewind_policy to a more
generic term like load_policy.
For instance, we'd like to set spa->spa_import_flags from the nvlist,
rather from a flags parameter passed to spa_import as in some cases we want
those flags not only for the import case, but also for the open case. One
such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb) which would
allow zfs to open a pool when logs are missing.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
9191 dump vdev tree to zfs_dbgmsg when spa load fails due to missing log devices
illumos/illumos-gate@ccef24b493
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
9187 racing condition between vdev label and spa_last_synced_txg in vdev_validate
illumos/illumos-gate@d1de72cfa2
ztest failed with uncorrectable IO error despite having the fix for #7163.
Both sides of the mirror have CANT_OPEN_BAD_LABEL, which also distinguishes
it from that issue.
Definitely seems like a racing condition between the vdev_validate and spa_sync:
1. Thread A (spa_sync): vdev label is updated to latest txg
2. Thread B (vdev_validate): vdev label's txg is compared to spa_last_synced_txg and is ahead.
3. Thread A (spa_sync): spa_last_synced_txg is updated to latest txg.
Solution: do not check txg in vdev_validate unless config lock is held.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@8671400134
The idea of Storage Pool Checkpoint (aka zpool checkpoint) deals with
exactly that. It can be thought of as a “pool-wide snapshot” (or a
variation of extreme rewind that doesn’t corrupt your data). It remembers
the entire state of the pool at the point that it was taken and the user
can revert back to it later or discard it. Its generic use case is an
administrator that is about to perform a set of destructive actions to ZFS
as part of a critical procedure. She takes a checkpoint of the pool before
performing the actions, then rewinds back to it if one of them fails or puts
the pool into an unexpected state. Otherwise, she discards it. With the
assumption that no one else is making modifications to ZFS, she basically
wraps all these actions into a “high-level transaction”.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
It's not sufficient nor required to use the vnode interlock when
checking if we are going to drop the last use count as the code in
vputx() uses refcount (atomic) operations for both checking and
decrementing the use code. Apply the same method to vn_rele_async().
While here, remove vn_rele_inactive(), a wrapper around vrele() that
didn't add any value.
Also, the change required making vfs_refcount_release_if_not_last()
public. I've made vfs_refcount_acquire_if_not_zero() public as well.
They are in sys/refcount.h now. While making the move I've dropped the
vfs_ prefix.
Reviewed by: mjg
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D14869
These have been supplanted by the MI signal information codes in
<sys/signal.h> since 7.0. The FPE_*_TRAP ones were deprecated even
earlier in 1999.
PR: 226579 (exp-run)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14637
vdev_dbgmsg_print_tree printed vdev_id of uint64_t type with %u format
specifier. That caused subsequent parameters to be incorrectly read
from the stack and lead to a crash when a wrong value was interpreted as
a string pointer.
This should be upstreamed.
Reported by: pho
MFC after: 3 days
illumos/illumos-gate@edc8ef7d92
Reviewed by: C Fraire <cfraire@me.com>
Reviewed by: Andy Fiddaman <omnios@citrus-it.co.uk>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Author: Toomas Soome <tsoome@me.com>
In pursuit of improving performance on multi-core systems, we should
implements fanned out counters and use them to improve the performance of
some of the arc statistics. These stats are updated extremely frequently,
and can consume a significant amount of CPU time.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
illumos/illumos-gate@5f5913bb835f5913bb83https://www.illumos.org/issues/9164
This issue has been reported by Alan Somers as
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=225877
dmu_objset_refresh_ownership() first disowns a dataset (and releases
it) and then owns it again. There is an assert that the new dataset
object is the same as the old dataset object. When running ZFS Test
Suite on FreeBSD we see this panic from zpool_upgrade_007_pos test:
panic: solaris assert: newds == os->os_dsl_dataset (0xfffff80045f4c000
== 0xfffff80021ab4800)
I see that the old dataset has dsl_dataset_evict_async() pending in
ds_dbu.dbu_tqent and its ds_dbuf is NULL.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <avg@FreeBSD.org>
PR: 225877
Reported by: asomers
MFC after: 1 week
Update the ZFS TRIM code to ensure it respects VTOC8 partition headers as
documented by the ZFS On-Disk Specification section 1.3
Before this a zpool create on a VTOC8 partitioned device would overwrite the
partition metadata.
Reported by: marius
Reviewed by: marius agv
MFC after: 1 week
Sponsored by: Multiplay
illumos/illumos-gate@e9bacc6d1ae9bacc6d1ahttps://www.illumos.org/issues/8984
Consider a directory configured as:
drwx-ws---+ 2 henson cpp 3 Jan 23 12:35 dropbox/
user:henson:rwxpdDaARWcC--:f-i----:allow
owner@:--------------:f-i----:allow
group@:--------------:f-i----:allow
everyone@:--------------:f-i----:allow
owner@:rwxpdDaARWcC--:-di----:allow
group:cpp:-wx-----------:-------:allow
owner@:rwxpdDaARWcC--:-------:allow
A new file created in this directory ends up looking like:
rw-r--r-+ 1 astudent cpp 0 Jan 23 12:39 testfile
user:henson:rw-pdDaARWcC--:------I:allow
owner@:--------------:------I:allow
group@:--------------:------I:allow
everyone@:--------------:------I:allow
owner@:rw-p--aARWcCos:-------:allow
group@:r-----a-R-c--s:-------:allow
everyone@:r-----a-R-c--s:-------:allow
with extraneous group@ and everyone@ entries allowing read access that
shouldn't exist.
Per Albert Lee on the zfs mailing list:
"aclinherit=passthrough/passthrough-x should still
ignore the requested mode when an inheritable ACE for owner@ group@,
or everyone@ is present in the parent directory.
It appears there was an oversight in my fix for
https://www.illumos.org/issues/6764 which made calling zfs_acl_chmod
from zfs_acl_inherit unconditional. I think the parent ACL check for
aclinherit=passthrough needs to be reintroduced in zfs_acl_inherit."
We have a large number of faculty who use dropbox directories like the example
to have students submit projects. All of these directories are now allowing
Reviewed by: Sam Zaydel <szaydel@racktopsystems.com>
Reviewed by: Paul B. Henson <henson@acm.org>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Dominik Hassler <hadfl@omniosce.org>
PR: 216886
MFC after: 2 weeks
Those operations, zfsctl_snapdir_readdir and zfsctl_snapdir_getattr,
access the filesystem's objset and it can be unstable during operations
like receive and rollback.
MFC after: 2 weeks
It gets called by dmu_buf_init_user, which is inline but not static. So it
needs global linkage itself.
Reported by: GCC-6
MFC after: 17 days
X-MFC-With: 329722
This change is designed to account for yet another difference between
illumos and FreeBSD VFS. In FreeBSD a filesystem driver is supposed to
clean up mnt_data in its VFS_UNMOUNT method because it's the last call
into the driver before a struct mount object is destroyed. The VFS
drains all references to the object before destroying it, but for the
driver it's already as good as gone.
In contrast, illumos VFS provides another method, VFS_FREEVFS, that is
called when all references are drained. So, the driver can keep its
data after VFS_UNMOUNT and clean it up in VFS_FREEVFS after all
references are gone. This is what ZFS does on illumos.
So there a reference to a filesystem is sufficient to guarantee that the
ZFS specific data, aka zfsvfs_t, stays around (even if the filesystem
gets unmounted). In FreeBSD we need to vfs_busy the filesystem to get
the same guarantee. vfs_ref guarantees only that the struct mount is
kept.
The following rules should be observed in getzfsvfs / getzfsvfs_impl on
FreeBSD:
- if we need access to zfsvfs_t then we must use vfs_busy
- if only we need to access struct mount (aka vfs_t), then vfs_ref is
enough
- when illumos code actually needs only the vfs_t, they still can pass
the zfsvfs_t and get the vfs_t from it; that can work in FreeBSD if
the filesystem is busied, but when it's just referenced then we have
to pass the vfs_t explicitly
- we cannot call vfs_busy while holding a dataset because that creates a
LOR with dp_config_rwlock
As a result:
- getzfsvfs_impl now only references the filesystem, same as in illumos,
but unlike illumos it has to return the vfs_t
- the consumers are updated to account for the change
- getzfsvfs busies the filesystem (and drops the reference from
getzfsvfs_impl)
Also, zfs_unmount_snap() now gets a busied a filesystem, references it
and then unbusies it essentially reverting actions done in getzfsvfs.
This is needed because the code may perform some checks that require the
zfsvfs_t. So, those are done before the unbusying.
MFC after: 2 weeks
vrele() acquires the vnode lock only if the hold count drops to zero.
In other scenarios it needs only the interlock. So,
zfsctl_snapdir_lookup() can race with vfs_mount_destroy() -> vrele()
such that the lookup adds a new reference and then vrele() drops the
mountpoint's reference and only then we check the reference count.
It would be just one in this case.
In fact, the assert should have been removed in r323483 when the code
learned how to deal with the uncovered vnode.
PR: 225795
MFC after: 4 days
X-MFC with: r329556
