Commit Graph

3793 Commits

Author SHA1 Message Date
Sam Leffler
11484af448 correct bus-isicty of D-Link cards
Submitted by:	Stefan =?iso-8859-1?Q?E=DFer?= <se@freebsd.org>
2003-06-28 17:59:37 +00:00
Hidetoshi Shimokawa
dc17e7c1cc Add reference to CAM. 2003-06-28 15:43:27 +00:00
Sean Kelly
dbfaa8c5d3 Add documentation for watchdogd_enable setting.
Approved by:	jeff (mentor)
2003-06-28 04:57:38 +00:00
Sam Leffler
087f17b85e typo
Submitted by:	Peter Wemm <peter@wemm.org>
2003-06-26 23:48:56 +00:00
Sean Kelly
370c3cb57c - Add a software watchdog facility.
This commit has two pieces. One half is the watchdog kernel code which lives
primarily in hardclock() in sys/kern/kern_clock.c. The other half is a userland
daemon which, when run, will keep the watchdog from firing while the userland
is intact and functioning.

Approved by:	jeff (mentor)
2003-06-26 09:50:52 +00:00
Hartmut Brandt
bae1fbdc9f 'options atm' should actually read 'device atm'.
Pointed out by: Craig Rodrigues
2003-06-25 16:04:19 +00:00
Hartmut Brandt
87b1aa8cb8 This is the man page for the netgraph ATM node. 2003-06-25 13:21:55 +00:00
Maxime Henrion
095ee947fb Backout part of my previous commit dealing with bus_dmasync_op_t
documentation since people think it was better the way it was before.

Requested by:	gibbs (some time ago)
2003-06-25 13:15:51 +00:00
Sam Leffler
7c3015e371 attach Atheros manual pages to the build 2003-06-23 20:54:39 +00:00
Sam Leffler
b7ae140904 manual page for the Atheros Hardware Access Layer module 2003-06-23 20:53:44 +00:00
Sam Leffler
cf8faa800c ath driver manual page 2003-06-23 20:34:28 +00:00
Ruslan Ermilov
b81d803e0f MASTER_SITE_OVERRIDE can list several sites. 2003-06-23 20:01:58 +00:00
Hartmut Brandt
fb24f088ae This is a driver for Fore PCA200E cards that uses busdma and works on
little endian and big endian and with 32 and 64 bit pointers. It already
has the hooks to be used for HARP, NATM and ngATM.
2003-06-23 14:46:12 +00:00
John-Mark Gurney
07e3ed79cd add verbage on various failure cases to match the /dev/pci interface. 2003-06-23 02:13:23 +00:00
Mike Silbersack
04a7874315 Update the description of the Netgear MA401 to say Prism-II/2.5;
my 401 is a 2.5, so presumably many of them are.

MFC after:	3 days
2003-06-20 04:27:55 +00:00
Hiten Pandya
32c4d090ab Add MLINK for busdma(9) to bus_dma(9).
This resolves confusion for at least 10 people.

Suggested by:	Bruce M. Simpson <bms@spc.org>
Approved by:	des (mentor)
2003-06-17 19:50:59 +00:00
Hartmut Brandt
1ebb6f8748 Reference the hatm(4) driver man page. 2003-06-17 16:15:47 +00:00
Hartmut Brandt
104d36fc36 The man page for the Fore/Marconi HE155/622 driver. 2003-06-17 16:14:31 +00:00
Frank Durda IV
9211e402f5 Re-introduction of the matcd Compact Disc drive driver documentation.
The matcd.4 man page has been upgraded to reflect current 5.1.x
functionality, and efforts were made to match the style and layout found
in similar-single purpose block drivers man pages found in the 5.1 tree
man4 area while not losing useful information.  However, the documentation
folks should still take a look, since the man pages used as guides were
somewhat inconsistent on a variety of points.

Approved by:	markm(mentor)
2003-06-17 04:28:12 +00:00
Hartmut Brandt
eeb23684ec Reference the new natmip(4) man page. 2003-06-16 15:51:55 +00:00
Yaroslav Tykhiy
5d96084f89 Name a function argument "mbuf", not "buf", if it is
a pointer to struct mbuf for clarity and consistency.
2003-06-15 14:47:12 +00:00
Yaroslav Tykhiy
da72b9983c Add missing descriptions of macros M_ALIGN and MH_ALIGN.
Remove a reference to the defunct macro M_COPY_PKTHDR;
document the new functions m_dup_pkthdr() and m_move_pkthdr(),
and the macro variant of the latter, M_MOVE_PKTHDR().
2003-06-15 14:40:03 +00:00
Yaroslav Tykhiy
7b2fd1831f Add more markup to the mbuf(9) manpage. This includes:
- tagging plaintext "mbuf", "mbuf cluster", and "mbuf chain"
  with .Vt (variable type) since all of them are ways of managing
  data, i.e., they can be seen as data types;

- using .Vt/.Va instead of .Li (literal) where appropriate;

- tagging plaintext words that actually refer to function arguments
  with .Fa.

Suggested by:	ru
2003-06-15 14:14:11 +00:00
Yaroslav Tykhiy
be82a0bc5a Use .Va, not .Fa, to refer to structure members.
mdoc(7) contains an ambiguous statement on the issue,
but our mdoc(7) police's opinion is solid.

Suggested by:	ru
2003-06-15 12:42:41 +00:00
Mike Makonnen
da02c8c47e Catch up man page with reality in rc.d/named.
Pointed out by:	Simon L. Nielsen <simon@nitro.dk>
2003-06-14 22:43:40 +00:00
Tom Rhodes
1cbb9689ed Remove the old xref to kerberos(1), and replace it with an xref to
kerberos(8).  According to markm, the kerberos(8) manual page is
installed if NO_KERBEROS is set.

PR:	30443
2003-06-14 13:23:49 +00:00
Maxime Henrion
b9b855dd65 - Document the fact that you can specify several DMA operations to
bus_dmamap_sync() by OR'ing them together.
- Don't document what BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE and
  BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE is supposed to do when
  passed to bus_dmamap_sync().  There are other possible combinations
  and the reader just needs to know what the individual flags do and
  that he can combine different DMA operations.
- Use .An when listing authors.

Reviewed by:	hmp
2003-06-13 20:07:49 +00:00
Hartmut Brandt
27dcc304bf Factor out the description of how to configure a CLIP into its own
man page. This will be more scaleable as more driver man pages hit
the tree. Add also a description on how to do this configuration
in the rc.conf script.
2003-06-13 12:33:33 +00:00
Hartmut Brandt
9f03490f0e Remove the documentation of the raw AAL0 access which has been removed.
This raw cell stuff not used in the tree and a doubt that it is used
anywhere else. It was also very Midway specific.
2003-06-13 12:27:41 +00:00
Hartmut Brandt
1ba46a03b7 Make the midway driver use the new ATM phy driver. This allows one to
toggle several media options (sonet/sdh, for example) with ifconfig and
to see the carrier state in ifconfig's output. It gives also read/write
access (given the right privilegs) to the S/Uni registers to user space
programs.
2003-06-13 12:08:09 +00:00
Hiten Pandya
97a30ee292 Remove paragraph which describes how we might switch our packet queueing
discipline to Random Early Detection (RED) in the future.  The same para
incorrectly spelt ``Random Early Detection'' as ``Random Early Drop''.

While I am there, nuke IF_ENQ_DROP from the list of functions.  More
work will be done on this, since some of the functions like
if_enq_drop() and if_queue_drop() were replaced with one function
called if_handoff() that does the job of enqueing the packet and
updating interface statistics as necessary.

Reviewed by:		wollman
Approved by:		des (mentor)
MFC after:		1 day
2003-06-12 21:33:00 +00:00
Hartmut Brandt
591f4054cb This is a driver for the physical layer chips used in ATM interfaces.
It currently supports the PMC Sierra Lite, Ultra and 622 chips and
the IDT 77105. The driver handles media options and state in a consistent
manner for ATM drivers. The next commit to the midway driver will make
it use utopia.
2003-06-12 14:28:32 +00:00
Hartmut Brandt
33f73ee488 Document the fact that one is allowed to sleep while holding an sx lock.
Discussed with: jhb@
2003-06-12 09:06:25 +00:00
Hartmut Brandt
eb74baf398 Rename the section 'locking considerations' into 'context'.
Change the wording in this section to get rid of references to mutexes
and talk about sleeping instead.

Discussed with: jhb@, ru@
2003-06-12 09:03:15 +00:00
Thomas Moestl
cc264d0083 - Add manpages for the gem and hme ethernet drivers. These were obtained
from NetBSD, and changed slightly to account for FreeBSD specifics.
- Hook them up to the build.
- Add them to the list of miibus-using drivers in miibus(4).
2003-06-10 18:53:15 +00:00
Sheldon Hearn
7c2c06f2cd Add cross-references to pci(4) and pciconf(8). 2003-06-10 09:20:04 +00:00
Hiten Pandya
33659d9aad Hook up pci(9) manual page to the build.
Approved by:	des (mentor)
2003-06-09 17:33:25 +00:00
Hiten Pandya
aac0aafa05 Bring in a manual page documenting some important functions of the
PCI bus interface.  I have made some modifications to this manual
page, so it looks a bit different from the original version that
was posted to me.

Submitted by:		Bruce M. Simpson <bms@spc.org>
Reviewed by:		imp, mdodd (early copy)
Approved by:		des (mentor)

MFC after:		3 days
2003-06-09 17:32:41 +00:00
Peter Pentchev
f4c311e6ff Remove duplicate 'of the'.
PR:		53073
Submitted by:	Priit Piipuu <priit.piipuu@mail.ee>
MFC after:	2 weeks
2003-06-09 09:19:21 +00:00
Ruslan Ermilov
93303bace1 Document the NOLIBPTHREAD and NOLIBTHR knobs. 2003-06-08 23:48:02 +00:00
Ceri Davies
8d760375f2 Apply a couple of grammatical improvements.
MFC after:	2 days
2003-06-08 19:49:37 +00:00
Philippe Charnier
c42ce50d6a The .Xr utility 2003-06-08 13:35:40 +00:00
Philippe Charnier
f06471d44a Use .Ic instead of .Xr for internal commands 2003-06-08 13:33:50 +00:00
Philippe Charnier
55241cdbe7 Remove reference to deprecated xtend(8) 2003-06-08 13:31:38 +00:00
Philippe Charnier
c2d6966a95 Add or correct section number in .Xr 2003-06-08 13:27:57 +00:00
Mike Makonnen
d679c13014 The dhcp_program and dhcp_flags variables have to be renamed to
take advantage of the rc.subr(8) glue. They are renamed dhclient_program
and dhclient_flags.
	o Rename them in rc.conf(5)
	o Rename them in /etc/defaults/rc.conf
	o Add the deprecated variables to /etc/rc.subr
	o Isolate the use  of the 'command' variable to the
	  NetBSD specific parts in /etc/rc.d/dhclient.
	o Now that dhcp_flags has also been renamed it will
	  be applied properly by rc.subr(8) glue code.

Reported by:	John Nielsen <john@jnielsen.net>
2003-06-07 10:31:17 +00:00
Ruslan Ermilov
7ad3fab81e Fixed cross references to pccbb(4), fixed spelling of "device cbb",
and linked the pccbb(4) manpage to cbb(4).

Reviewed by:	imp
2003-06-05 21:12:55 +00:00
Robert Watson
1792c88d10 Document VOP_LISTEXTATTR(9).
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-06-05 14:20:48 +00:00
Robert Watson
fa414127fb ENOATTR is now used for error returns indicating an undefined
extended attribute.

EINVAL can also reflect an invalid namespace for either a get
or set operation on EAs.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-06-05 13:42:37 +00:00
Robert Watson
e652f5ba74 Document the BUG (feature) that you can pass in an empty name to
VOP_GETEXTATTR() to retrieve the attribute name list on some file
systems, and note that this will be replaced with its own VOP
in due course.

Pointed out by:	Dominic Giampaolo <dbg@apple.com>
2003-06-04 04:03:58 +00:00