flag to use a time other than modtime (-c, -u, or -U), the output would
actually be sorted by the specified time rather than size. This does
alter the behavior in the case where both -S and -t are specified. Now,
-S is always preferred. Previously, -t was preferred if one of -c, -u, or
-U was specified, and -S was preferred otherwise. Perhaps -S and -t should
override each other (last one specified wins).
files is too much and hard to follow. Instead, make the -I option
just mean "do not automatically set -A for root". That is, if -A
is explicitly set, -I is ignored. Also, document -I in usage().
(The ls.c diff is better viewed relative to rev. 1.80.)
No objection: mux
Silence from: mnag
MFC after: 3 days
sort(1). This functionality is provided by the -S option now, and it
is useful even though a similar effect is achievable with sort(1),
since the latter doesn't work in combination with -h. This option is
also present in NetBSD, OpenBSD, and GNU fileutils, so there's clearly
a demand for it.
Noticed by: asmodai
have this option with identical semantics (sorting large files first).
-r can be used to reverse the sort if that is desired.
PR: 81625
Submitted by: Kostas Blekos <mplekos@physics.upatras.gr>, keramida
regardless whether the output is to a terminal or not. As this is
consistent with the SUSPv2 specification (even though we do not
otherwise fully implement SUSPv2's ls(1) options), document this as it
is now, rather than trying to change the behaviour itself.
PR: docs/76072
Submitted by: Sebastian Rey <Sebastian.rey@gmx.net>
MFC after: 1 week
the [acm]time are the same. I was going to use Scott's patch, but I
couldn't get the style quite right, so I used a patch of my own.
Submitted by: Scott Mitchell <scott+freebsd at fishballoon.org>
MFC after: 3 weeks
have no entries to print (either due to an empty directory or an
error). This makes the -l and -s options more consistent, like
Solaris and (Debian) Linux. To make this happen, tweak two
optimizations on the second call to display():
- Don't skip display() altogether, even if list == NULL.
- Don't skip the call to the printfn in display() if we
need to print the total.
PR: 45723
LC_CTYPE setting) when determining which characters are printable.
This is an often-requested feature.
Use wcwidth() to determine the number of column positions a character
takes up, although there are still a few places left where we assume
1 byte = 1 column position, e.g. line-wrapping when handling the -m option.
The error handling here is somewhat more complicated than usual: we do
our best to show what we can of a filename in the presence of conversion
errors, instead of simply aborting.
will print them (i.e., number of successful calls to acl_get_entry()
exceeds 3). This makes O(1) what was O(num_TYPE_ACCESS_ACLs).
This is a slightly modified version of submitter's patch.
PR: bin/65042
Submitted by: Christian S.J. Peron <maneo@bsdpro.com>
1. Sizes in the range 1000 -- 1023 units require four characters width
for the integer; increase the field width to accomodate this.
2. Sizes in the range 9.95 -- 10 units were being displayed as "10.0"
units; adjust the logic to fix this, and now that we've got an extra
character of field width, print fractional units if the size is less
than 99.95 units.
3. Don't display sub-byte precision.
This should mean that the following sizes are displayed:
0B .. 1023B
1.0U .. 9.9U
10.0U .. 99.9U
100U .. 1023U
for values of U in "KMGTPE".
PR: bin/63547
Pointy hat to: cperciva
Approved by: rwatson (mentor)
from log[10](largest file size), but when outputting in human-friendly
format the width is always at most 4. (eg. "123K", " 12K", "1.2K".)
PR: bin/59320
Approved by: rwatson (mentor)
determine whether a symlink has an ACL. Instead, assume that symbolic
links don't have ACLs and don't bother checking. Avoids spurious
ENOENT warnings when listing directories containing broken symlinks
on filesystems with ACLs enabled.
Pointed out by: rwatson, bde
do the wrong thing when the symlink doesn't have a target, by
considering !f_label in the construction of ch_options.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
listings if the file has an extended ACL (more than the required 3 entries).
This is what Solaris and IRIX do, and what the withdrawn POSIX.2c standard
required.
Reviewed by: rwatson (an earlier version of the patch)
object to retrieve label information on, rather than directly
consuming the fts-provided paths (none of which are quite right).
This is based on the similar readlink() code, and may contain
the same bugs.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
than the LOMAC-specific interfaces for listing MAC labels. This permits
ls to view MAC labels in a manner similar to getfmac, when ls is used
with the -l argument. Next generation LOMAC will use the MAC Framework
so should "just" work with this and other policies. Not the prettiest
code in the world, but then, neither is ls(1).
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
appropriate. Before this, a 2.9 GB file was misleadingly reported as
"2G". This mostly brings unit_adjust() in line with what is in du(1).
Reviewed by: jmallett
Approved by: nik
hack, thereby allowing future extensions to the structure (e.g., for extended
attributes) without rebreaking the ABI. FTSENT now contains a pointer to the
parent stream, which fts_compar() can then take advantage of, avoiding the
undefined behavior previously warned about. As a consequence of this change,
the prototype of the comparison function passed to fts_open() has changed
to reflect the required amount of constness for its use. All callers in the
tree are updated to use the correct prototype.
Comparison functions can now make use of the new parent pointer to access
the new stream-specific private data pointer, which is intended to assist
creation of reentrant library routines which use fts(3) internally.
Not objected to in spirit by: -arch
(I skipped those in contrib/, gnu/ and crypto/)
While I was at it, fixed a lot more found by ispell that I
could identify with certainty to be errors. All of these
were in comments or text, not in actual code.
Suggested by: bde
MFC after: 3 days
-m List files across the page, separated by commas.
-p Print a slash after directory names
-x Same as -C but sort across the columns rather than down
Submitted by: Kyle Martin <mkm@ieee.org>
Install sys/<arch>/include/pc/*.h to /usr/include/machine/pc/.
PR: docs/29534
Install sys/netatm/*/*.h to /usr/include/netatm/*/.
Don't install compatibility symlinks for <machine/soundcard.h>
and <machine/joystick.h>. Three years is enough to be aware of
the change, and these weren't visible in the SHARED=symlinks
case.
Back out include/Makefile,v 1.160 that was a null change anyway
due to the bug in the path, and we now don't want to install
these headers because they would otherwise be invisible in the
SHARED=symlinks case.
Don't install IPFILTER headers. Userland utilities fetch them
directly, and they were not visible in the SHARED=symlinks case.
Resurrect SHARED=symlinks in Makefile.inc1.
PR: bin/28002
Prodded by: bde
MFC after: 2 weeks
o Old-style K&R declarations have been converted to new C89 style
o register has been removed
o prototype for main() has been removed (gcc3 makes it an error)
o int main(int argc, char *argv[]) is the preferred main definition.
o Attempt to not break style(9) conformance for declarations more than
they already are.
Fixed setting of WARNS in rev.1.16. Options should normally be set using
using "?=", not using "=", so that the setting is easy to override on the
command line, and setting WARNS to 0 should not be an exception.
file sizes to be displayed with unit suffixes; Byte, Kilobyte,
Megabyte, Gigabyte, Terabyte and Petabyte in order to reduce the
number of digits to three or less.
Submitted by: nik
are now defined using the characters a-h and A-H for the bold
variants. The old way using 0-7 for the colours still works, but
prints a message asking the user to switch.
PR: bin/27374
flag has been depricated, although it still works with a warning
message, and replaced with an environment variable CLICOLOR (command
line interface colour). This could be used by other tools that
want to be able to control colour output.
In addition if the environment variable CLICOLOR_FORCE is defined
colour sequences are output irrespective of whether the output is
directed to a terminal (as long as TERM references a colour capable
terminal of course ;)
PR: bin/20291 and bin/20483
terminal emulator.
As pointed out by jhb, a more scalable solution would be preferable
when multiple applications in the base system begin linking against
libh.
Submitted by: Doug Barton <DougB@gorean.org>
the long -l output format with the last commit. Fix it
by replacing the "%b %e" strftime format with "%Ef".
Make a note in the manual page that the LANG environment
variable affects the running of ls.
Reviewed by: ache
representation of time and date") won't change in time. Instead
of hard coding the locations of the time elements and hoping that
they don't move use strftime to generate the desired formats in
the first place.
PR: bin/7826
Don't use curses functions, use tputs instead
Add ^C reaction - reset colors
Optimization - don't turn off colors after EACH file printed.
Fix wrong ctype macro arg type in LSCOLORS parsing
this is extremely inefficient, instead write them all down at the
beginning.
The correct sequence to switch colours off is to first use 'op' if
it exists, otherwise use 'oc'. If neither of these exist then we
shouldn't be doing colour with this terminal.
Reviewed by: ache
to manage the ANSI colour sequences. Colour support is disabled
unless the TERM environment variable references a valid termcap.
* Allow optional compilation of the colour support in the Makefile,
defaulting to yes. This allows us to switch it off for fixit
floppies and other mediums where space is an issue and the extra
bloat of statically linking with ncurses isn't acceptable.
* Display a warning if colour is requested with '-G' but support
for it isn't compiled in.
It is not switched on by default and must be enabled with the -G
flag. When using ls -G the output behaviour is modified with ANSI
colour sequences wrapped around filenames to help distinguish file
types. (Colours can be redefined in the LSCOLORS environment
variable as described in the manual page.)
Colour support is silently disabled (if switched on) if stdout
isn't a tty.
Based on: asami's colorls port.
PR: bin/18900 && ports/18616.
