While here only compile both of them if WITH_ISCSI is set (this is the default).
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30755
Sponsored by: Diablotin Systems
And move all the nfs related commands there.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30754
Sponsored by: Diablotin Systems
It can still be enabled as usual in /etc/periodic.conf
PR: 256253
Reported by: delphij
Submitted by: Miroslav Lachman <000.fbsd@quip.cz>
MFC after: 2 weeks
Old certctl commands still work for compatability, but are deprecated.
Approved by: secteam (gordon)
Differential Revision: https://reviews.freebsd.org/D30807
The "config" line in config files has been obsolete since FreeBSD 4.x
when we moved to having the boot loader pass in the root device. Remove
it.
MFC After: 1 week
Sponsored by: Netflix
When we introduced libpfctl in bnsmpd this was done incorrectly, and a
GETRULE call was replaced by pfctl_add_rule().
Change it to pfctl_get_rule().
Reviewed by: donner
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
Apparently some large-file systems out there, such as my powerpc64le
Linux box, define daddr_t as a 32-bit type, which is sad and stymies
cross-building disk images. Cast daddr_t to off_t before doing
arithmetic that overflows.
Reviewed by: arichardson, jrtc27, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27458
Since 2d82b47 syslogd can't be built with `WITHOUT_INET` or
`WITHOUT_INET6` build variables set, because `iovlist_truncate` is not
defined but used.
This change wraps the problematic `iovlist_truncate` call within ifdef
directive. It's compiled out in this situation...
Pull Request: https://github.com/freebsd/freebsd-src/pull/475
Reviewed by: imp@ (commit message slightly tweaked)
Register a resize callback with the blockif interface. When the
callback fires, update the size of the disk and notify the guest via a
configuration change interrupt.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30506
This allows device models to assert VirtIO interrupts for reasons
other than publishing changes to a VirtIO ring such as configuration
changes.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30505
Allow clients of blockif to register a resize callback handler. When
a callback is registered, register an EVFILT_VNODE kevent watching the
backing store for a change in the file's attributes. If the size has
changed when the kevent fires, invoke the clients' callback.
Currently resize detection is limited to backing stores that support
EVFILT_VNODE kevents such as regular files.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30504
This allows registering an event to watch for changes to a file's
attributes. This is a bit imperfect as it would be nice to have a way
to determine if an fd can use EVFILT_VNODE successfully. mevent's
current structure does not permit that and a failure to register a
single kevent impacts several other kevents.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30503
Change mevent_add*() to synchronously add the new kevent. This
permits reporting event registration failures to the caller and avoids
failing the registration of other, unrelated events queued up in the
same batch.
Reviewed by: grehan, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D30502
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30680
Reviewed by: imp (earlier version), emaste (earlier version)
Sponsored by: Diablotin Systems
This will be used to inject keyboard/mouse input events into a guest.
The command line syntax is:
-s <slot>,virtio-input,/dev/input/eventX
Reviewed by: jhb (bhyve), grehan
Obtained from: Corvin Köhne <C.Koehne@beckhoff.com>
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D30020
This check was too aggressive: it is fine if SizeOfHeaders is exactly
equal to the size of the DOS stub + PE header + section table. Despite
being wrong this code typically worked for most EFI binaries because
SizeOfHeaders is rounded up to a multiple of FileAlignment, which is
often large (e.g., 512 bytes for the FreeBSD loader) so most binaries
made it through.
Reviewed by: imp@
Sponsored by: Netflix
Pull Request: https://github.com/freebsd/freebsd-src/pull/445
Incorrectly linked built-in wpa functions resulted in overwriting
sm->ctx->set_rekey_offload with garbage. It was initialized correctly
however it changed after wpa_supplicant became a daemon.
No SIGBUS violations reported by dhw@ were experienced during testing
of the original commit by msyelf or philip@.
Reported by: dhw
Tested by: dhw
MFC after: 2 months
X-MFC with: 25ecdc7d52770caf1c9b44b5ec11f468f6b636f3
The default is to create a zroot that consumes the whole disk because if
used with geli(8) this makes sense.
Without geli(8), I like to keep my data pool separate from my system
pool.
This is different than ZFSBOOT_BOOT_POOL_SIZE which is named bootpool.
Reviewed by: allenjude
Pull Request: https://github.com/freebsd/freebsd-src/pull/53
Differential Revision: https://reviews.freebsd.org/D30588
Also improve temporary file usage in 200.accounting, add an xref to
zstd(1) to newsyslog.conf.5, and clarify in periodic.conf that
"daily accounting" means process accounting and "monthly accounting"
is login accounting.
PR: 253868
Reviewed by: allanjude
Approved by: blackend (mentor)
Differential Revision: https://reviews.freebsd.org/D29267
The pciconf command fails to emit newlines when particular ecap field
values are seen. Fix them up. This has been seen on several systems at
$JOB. The documentation for PCI capabilities says that capability
type 0 should not be used once the spec for PCI capabilities was
published, but that seems more wishful-thinking than reality. pciconf
also chooses not to print fields related to field values that are
zero, but it seems several of these fields are zero on actual
hardware.
Reviewed by: vangyzen, imp, Bret Ketchum (Bret.Ketchum@dell.com)
Sponsored by: Dell EMC Isilon
Submitted by: Robert Herndon (Robert.Herndon@dell.com)
Differential Revision: https://reviews.freebsd.org/D30441
This is a follow-up to 5fa29797910346fc0c54829bd979856e83b9b7ea .
PR: 256311
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29867
The current WPA build assumes a flat namespace. However the latest sources
from w1.fi now have a duplicate config.c, in two separate subdirectories.
The flat namespace will overwrite config.o with the output from the most
recently modified config.c, of which there are two of them.
This commit resolves this problem by building each component in
wpa's src subdirectory tree into its own .a archive, just as the w1.fi
upstream build as used by the port does. The advantages of this approach
are:
1. Duplicate source file names, i.e. config.c in the wpa_supplicant
direcory and another config.c in src/utils in the next wpa
will result in both compiles writing to the same .o file.
2. This restructure simplifies maintanence. A develper needs only to add
new files as identified by git status in the vendor branch to the
appropriate Makefile within the usr.sbin/wpa tree. This also reduces
time required to prepare a new import and should reduce error.
3. The new wpa build structure more closely represents the build as
performed by the upstream tarball.
This is in preparation for the next wpa update from w1.fi.
Reviewed by: philip
Tested by: philip
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D30372
There is a single consumer, the pmc utility, that clearly has knowledge
of which counters it is expecting. Remove this function and have it
use common counter aliases instead.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30528
Check if the pmu utils are supported rather than carrying a
machine-dependent #ifdef.
Reviewed by: gnn, ray, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30526
- Allow firmware downloading for hw_variant #8;
- Enter manufacturer mode for setting of event mask;
- Handle multi-event response on HCI commands for 7260;
This allows to remove kludge with skipping of 0xfc2f opcode.
- Disable patch and exit manufacturer mode on downloading failure;
- Use default firmware if correct firmware file is not found;
Reviewed by: Philippe Michaud-Boudreault <pitwuu_AT_gmail_DOT_com>
MFC after: 1 week
Tested by: arrowd
Differential revision: https://reviews.freebsd.org/D30543
The bsdinstall script target did not have the infrastructure to fetch
distfiles from a remote server the way the interactive installer does
on e.g. bootonly media. Solve this by factoring out the parts of the
installer that deal with fetching missing distributions into a new
install stage called 'fetchmissingdists', which is called by both the
interactive and scripted installer frontends.
In the course of these changes, cleaned up a few other issues with
the fetching of missing distribution files and added a warning if
fetching the MANIFEST file, which is used to verify the integrity of
the distribution files. We should at some point add cryptographic
signatures to MANIFEST so that it can be fetched safely if not present
on the install media (which it is for bootonly media).
Initial patch by: Vinícius Zavam
PR: 255659, 250928
Reviewed by: dteske
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D27121
Move initialization of the mutex/condition variables required by the
save/restore feature to their own function.
The unix domain socket that facilitates communication between bhyvectl
and bhyve doesn't rely on these variables in order to be functional.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D30281
When starting, ntpd calls setrlimit(2) to limit maximum size of its
stack. The stack limit chosen by ntpd is 200K, so when stack gap
is enabled, the stack gap is larger than this limit, which results
in ntpd crashing.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: cy, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D29553
kldxref(8) is the only tool that can dump FreeBSD kernel module
metadata, with the -d option. But the command line requirements for that
are inconvenient, since parser requires that argv[1] is a directory
containing whole set of modules to generate xref file.
For -d, allow argv[0] to be a regular file, now it is possible to do e.g.
$ kldxref -d /boot/kernel/ufs.ko
to see only ufs.ko metadata.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30368
While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
The HAVE_ZFS macro was dropped from the Makefile during the OpenZFS
merge, bring it back.
While here, drop unused WARNS setting.
PR: 255616
Reported by: Michael Büker <freebsd@michael-bueker.de>
Submitted by: Michael Büker <freebsd@michael-bueker.de>
Fixes: 9e5787d2284e187abb5b654d924394a65772e004
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30221
