the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
$ ipfw -n add 1 allow layer2 not mac-type ip
00001 allow ip from any to any layer2 not not mac-type 0x0800
PR: bin/115372
Submitted by: Andrey V. Elsukov
Approved by: re (hrs)
MFC after: 3 weeks
providers with limited physical storage and add physical storage as
needed.
Submitted by: Ivan Voras
Sponsored by: Google Summer of Code 2006
Approved by: re (kensmith)
This allows to use numbers in human-readable form in many geom(8)
utilities. Such a simple change and makes live so much nicer.
Some examples:
gstripe label -s 16k
gmirror label -s 4k
gnop create -o 1g -s 128m -S 2k
gjournal label -s 2g
geli label -i 128k -s 4k
Approved by: re (kensmith)
declaring the return value used by the routines in preen.c as a pointer
type, instead of "int", which was causing the pointer to be truncated.
Tested by: marck
Approved by: re (bmah)
will automatically issue the 16 byte verison of read capacity if the device
in question is larger than 2TB.
There are also a number of output options here (last block, number of
blocks, human readable) that should meet most needs, and also aid in
scripting.
Approved by: re (bmah)
MFC after: 1 week
pack a set number correctly.
Submitted by: oleg
o Plug a memory leak.
Submitted by: oleg and Andrey V. Elsukov
Approved by: re (kensmith)
MFC after: 1 week
detailed status on each of the backing subdisks. This allows userland
to see which subdisks are online, failed, missing, or a hot spare.
MFC after: 1 week
Approved by: re (bmah)
Reviewed by: sos
read-only, so we can't simply exit right after calling gjournal_check(),
instead we need to ask about super block reload.
Submitted by: Niki Denev <niki@totalterror.net>
PR: misc/113889
Approved by: re (kensmith)
Also rename the related functions in a similar way.
There are no functional changes.
For a packet coming in with IPsec tunnel mode, the default is
to only call into the firewall with the "outer" IP header and
payload.
With this option turned on, in addition to the "outer" parts,
the "inner" IP header and payload are passed to the
firewall too when going through ip_input() the second time.
The option was never only related to a gif(4) tunnel within
an IPsec tunnel and thus the name was very misleading.
Discussed at: BSDCan 2007
Best new name suggested by: rwatson
Reviewed by: rwatson
Approved by: re (bmah)
communicate with another private port.
All unicast/broadcast/multicast layer2 traffic is blocked so it works much the
same way as using firewall rules but scales better and is generally easier as
firewall packages usually do not allow ARP blocking.
An example usage would be having a number of customers on separate vlans
bridged with a server network. All the vlans are marked private, they can all
communicate with the server network unhindered, but can not exchange any
traffic whatsoever with each other.
Approved by: re (rwatson)
included man pages on how to use it. This code is still somewhat experimental
but has been successfully tested on a number of targets. Many thanks to
Danny for contributing this.
Approved by: re
NET_NEEDS_GIANT, which will shortly be removed. This is done in a
away that it may be easily reattached to the build before 7.1 if
appropriate locking is added. Specifics:
- Don't install netatm include files
- Disconnect netatm command line management tools
- Don't build libatm
- Don't include ATM parts in rescue or sysinstall
- Don't install sample configuration files and documents
- Don't build kernel support as a module or in NOTES
- Don't build netgraph wrapper nodes for netatm
This removes the last remaining consumer of NET_NEEDS_GIANT.
Reviewed by: harti
Discussed with: bz, bms
Approved by: re (kensmith)
This was needed during the IPSEC->FAST_IPSEC->IPSEC transition
period to not break the build after picking up netipsec header
files. Now that the FAST_IPSEC kernel option is gone and the
default is IPSEC again those defines are superfluous.
Approved by: re (rwatson)
- to show a specific set: ipfw set 3 show
- to delete rules from the set: ipfw set 9 delete 100 200 300
- to flush the set: ipfw set 4 flush
- to reset rules counters in the set: ipfw set 1 zero
PR: kern/113388
Submitted by: Andrey V. Elsukov
Approved by: re (kensmith)
MFC after: 6 weeks
removed, which will cause problems on architectures where
longs are longer than ints, for instance,
"mknod foo c 0 0xffff00ff"
would fail in such cases.
Use a proper cast instead.
Prompted by: bde
bridged, previously legitimate traffic was not passed as the bridge could not
tell that it was on a different Ethernet segment.
All non-tagged traffic is treated as vlan1 as per IEEE 802.1Q-2003
previous commit:
Remove IPX over IP tunneling support, which allows IPX routing over IP
tunnels, and was not MPSAFE. The code can be easily restored in the
event that someone with an IPX over IP tunnel configuration can work
with me to test patches.
This removes one of five remaining consumers of NET_NEEDS_GIANT.
Approved by: re (kensmith)
Spotted by: Artem Naluzhny <tutat nhamon dot com dot ua>
It only provides inet_aton(), which is already provided by the libc. This
causes multiple symbol definitions when linking statically.
Reviewed by: darrenr
a warning, return 1 instead of 0 to indicate that we didn't print
anything, so that top-level callers don't print a spurious newline.
This is mainly to fix output formatting when stderr is redirected. It
also helps in some cases when stderr is interleaved with stdout,
depending on the details of the interleaving (this program has the
usual null explicit support for syncing stderr with stdout).
Return 1 instead of -1 after printing the "malloc failed" warning, since
the return value is boolean.
o revised channel handling support; ifconfig now queries the kernel to
find the list of available channels and handles channel promotion;
channel attributes can be specified as part of the channel; e.g. 36:a
for channel 36 in 11a (as opposed to turbo A or HT A)
o use channel list to map between freq and IEEE channel #; this eliminates
all knowledge of how the mapping is done and fixes handling of cases
where channels overlap in the IEEE channel # space but are distinct in
the frequency+attributes space (e.g. PSB)
o add new knobs: bgscan, ff (Atheors fast frames), dturbo (Atheros
Dynamic Turbo mode), bgscanidle, bgscanintvl, scanvalid, roam:rssi11a,
roam:rssi11b, roam:rssi11g, roam:rate11a, roam:rate11b, roam:rate11g
(roaming parameters), burst, doth (forthcoming 11h support)
o print contents of WME, ATH, WPA, RSN, information elements with -v option
o print signal strength in dBm
o print noise floor in dBm
o add list txpow to print tx power caps/channel
o change default channel display in status to be more informative
value into a variable of the right type and then printing it via
an intmax_t. This makes avoids some duplication and makes it easy
to add a new integer format Q for printing things of type CTLTYPE_QUAD.
correct place on large sector disks. The boot signature should be at
offset 0x1fe in the BPB; newfs_msdos currently stores it 2 bytes from
the end of the sector.
Taken from: NetBSD
