size != 512 that are configured without a label. The bug should only
have effected swap-backed VN mounts without a label.
Add several major features to VN. In the kernel we add a swap
pre-reservation capability, which can be used to guarentee seek
consistency for swap-backed VN nodes. This also incidently allows
a swap-backed VN filesystem to be recovered after a crash in some
cases (if the same swap blocks happen to be reserved).
We also add a number of new options to vnconfig which do the work
of pre-zeroing or creating/truncating/extending a file which greatly
simplifies using VN in a file-backed configuration.
Add FreeBSD CVS label to sys/sys/vnioctl.h, as well as a new ioctl
flag for the swap pre-reservation feature.
Reviewed by: Alan Cox <alc@cs.rice.edu>, David Greenman <dg@root.com>
ip_tos == IPTOS_LOWDELAY now get precidence over urgent
packets with ip_tos != IPTOS_LOWDELAY and non-urgent packets
with ip_tos == IPTOS_LOWDELAY.
Enhance the ``set urgent'' syntax to allow for urgent UDP
packets as well as urgent TCP packets.
o If a prompt is executing the command, only display the warning to
that prompt
o If a prompt is executing a ``load'' command, display the warning
to all prompts *and* syslog
o Otherwise, display the warning to all prompts *and* syslog.
the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation
XPressNet. Datasheet is available from www.davicom8.com.
The DM910x chips are still more tulip clones. The API is reproduced
pretty faithfully, unfortunately the performance is pretty bad. The
transmitter seems to have a lot of problems DMAing multi-fragment
packets. The only way to make it work reliably is to coalesce transmitted
packets into a single contiguous buffer. The Linux driver (written by
Davicom) actually does something similar to this. I can't recomment this
NIC as anything more than a "connectivity solution."
This driver uses newbus and miibus and is supported on both i386
and alpha platforms.
SiS 900 and SiS 7016 PCI fast ethernet chipsets. Full manuals for the
SiS chips can be found at www.sis.com.tw.
This is a fairly simple chipset. The receiver uses a 128-bit multicast
hash table and single perfect entry for the station address. Transmit and
receive DMA and FIFO thresholds are easily tuneable. Documentation is
pretty decent and performance is not bad, even on my crufty 486. This
driver uses newbus and miibus and is supported on both the i386 and
alpha architectures.
(LCP/CCP/IPCP), one for urgent IP traffic and one for
everything else.
o Add the ``set urgent'' command for adjusting the list of
urgent port numbers. The default urgent ports are 21, 22,
23, 513, 514, 543 and 544 (Ports 80 and 81 have been
removed from the default priority list).
o Increase the buffered packet threshold from 20 to 30.
o Report the number of packets in the IP output queue and the
list of urgent ports under ``show ipcp''.
Supply RAD_NAS_IDENTIFIER if we have a `hostname` and
RAD_IP_ADDRESS if that hostname resolves.
Supply RAD_NAS_PORT using the ttyslot() of the tty that
we're authenticating on if it's a tty device.
Partially submitted by: Andriy I Pilipenko <bamby@marka.net.ua>
PR: 12225
I backed-out the changes in -current and didn't touch stable at all (I
thought I had my patch order reversed, not what actually happened).
AIEEE! I can't even blame the crack for this one since I broke my
crack pipe a few weeks ago. I think sleep deprivation gets the blame
for this one.
Medal for noticing this one goes to: Jim Bloom <bloom@acm.org>
bringing in DHCP support. The only thing I left out were Poul-Henning's
newfs changes since I'm not sure if he's brought the rest of that support
into -stable yet. If it turns out that this is the case, I'll MFC those
changes too.
going to remove ppp from the installation options in 5 days if ppp is
still broken, however, as it hasn't worked at installation time
for several weeks now and it's only causing people to fill my mailbox
with questions.
in NMEA mode (without date).
Trimble OEM Ace-II receiver. Low cost PCB with single
voltage input, external active antenna and two serial
ports with either NMEA and ITAPs output. Programmable
to be tuned for 'time' accuracy in fixed station config.
Author of tool notified.
Submitted by: Dirk van Gulik <dirk.vangulik@jrc.it>
in source input if the -f flag is used, and modify Makefile.yp to only
use -f for the passwd, master.passwd and group maps. These should be
the only ones for which the + and - characters have special meaning
that make it important for us to avoid letting them into any of the map
databases. In some cases (namely the automounter maps) we have to allow
at least the - character through in order to create the map properly.
This closes PR #8699.
PCI fast ethernet controller. Currently, the only card I know that uses
this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the
only cards I have are samples sent to me by D-Link.)
This driver is the first to make use of the miibus code once I'm sure
it all works together nicely, I'll start converting the other drivers.
The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design
only with its own register layout. Support is provided for ifmedia,
hardware multicast filtering, bridging and promiscuous mode.
should be used from now on for anything security but not auth-related.
Included are updates for all relevant manpages and also to /etc files,
creating a new /var/log/security. Nothing in the system logs to
/var/log/security yet as of the time of this commit.
Reviewed by: rgrimes, imp, chris
that ppp stays in the foreground.
o Add the -quiet switch to quieten ppps startup
o Add the -nat flag and discourage the use of the -alias flag. Both do
the same thing.
o Correct some nat usage strings.
o Change the internal ``alias'' command to ``nat''.
Remove src/contrib/bind/bin/nslookup/commands.c as it is generated by lex
from commands.l.
Submitted by: lpc/cdcontrol patches originally by msmith.
Reviewed by: msmith (in theory)
in a previous FreeBSD version. That never happened. Document that
it is due to be replaced, but leave it open-ended as to when.
Also do some mdoc cleanup.
PR: docs/13148
PR: docs/13144
Submitted by: Lee Cremeans <lcremeans@erols.com>
Alex M. Zelkim <phantom@cris.net>
Discussed with: jkh
- Sort xrefs.
- FreeBSD.ORG -> FreeBSD.org
- Be consistent with section names as outlined in mdoc(7).
- Other misc mdoc cleanup.
PR: doc/13144
Submitted by: Alexey M. Zelkin <phantom@cris.net>
Savings Time on cron(8). If we ever introduce some work-around code for
handling jobs scheduled for a time that "doesn't happen" due to DST,
the section should be renamed to IMPLEMENTATION NOTES.
PR: 10947
Reported by: Scott Drassinower <scottd@cloud9.net>
Submitted by: Seth Bromberger <seth@freebie.dp.ny.frb.org>
Reviewed by: mpp
0.81.1 of the i4b code - namely support of the I4B_VR_REQ
ioctl via the i4brbchX device.
Ppp controls the phone number, but idle timers and
SYNC/RAW decisions are still made by isdnd (in isdnd.rc).
This involves a new datalink state machine phase. The
``wait for carrier'' phase happens after dialing but
before logging in. The whole dial state should really
be abstracted so that each device type can deal with it
in its own way (thinking about PPPoE) - but that'll have
to wait.
The ``set cd'' symantics remain the same for tty devices,
but we now delay until we either get CD or timeout waiting
(at which time we drop the link if we require CD).
For i4b devices we always insist on carrier.
Thanks to hm@ for his help, and especially for pointing out
that I *don't* need to re-implement isdnd (that was a huge
waste of time !) :-]
o If we're using RADIUS and the RADIUS mtu is less than our
peers mru/mrru, reduce our mtu to this value for NetBSD too.
o Make struct throughput's sample period dynamic and tweak the ppp
version number to reflect the extra stuff being passed through
the local domain socket as a result (MP mode).
o Measure the current throughput based on the number of samples actually
taken rather than on the full sample period.
o Keep the throughput statisics persistent while being passed to
another ppp invocation through the local domain socket.
o When showing throughput statistics after the timer has stopped, use
the stopped time for overall calculations, not the current time.
Also show the stopped time and how long the current throughput has
been sampled for.
o Use time() consistently in throughput.c
o Tighten up the ``show bundle'' output.
o Introduce the ``set bandwidth'' command.
o Rewrite the ``set autoload'' command. It now takes three arguments
and works based on a rolling bundle throughput average compared against
the theoretical bundle bandwidth over a given period (read: it's now
functional).
o Document debug level keyword
o Implement debug level:
o For most of the diagnostic messages, change them from #ifdef DEBUG
to if (debuglevel > 0).
o Add a couple more diagnostic messages that weren't present before
o Fix a couple of excessively long lines.
Reviewed by: hosokawa-san
o Start to implement the stopgap kludge for -current's pccard code by passing
the length of the i/o range. If DEV_DESC_HAS_SIZE is defined, we'll set
the size. This is done as an ifdef so that I can generate patches
against the kernel more easily.
o Add preliminary support for tweaking sleep times, but leave it
disabled until a good range of values can be established.
Didn't fix: logmsg problem noted by Nate.
compatibility. : is still the documented non-ambiguous approach. The
algorithm used will correctly parse david.obrien.staff as strrchar() is
used, and in my mind more people would use a ``.'' in the username than
the group name.
Convinced by argument and patch by: sheldonh (with slight changes by me)
negate the sense of rules.
o Remove the redundant (and undocumented) ``host'' and ``port''
words (README.changes updated).
o Don't permit (and ignore) garbage instead of the protocol.
Mostly submitted by: Peter Jeremy <jeremyp@gsmx07.alcatel.com.au>
callback option, and the server sends us CBCP_NONUM, proceed directly
to the network phase rather than insisting on our configured CBCP
option.
Mostly submitted by: kkphang <phang@dgate.po.my>
Originally submitted by: Wayne Self <wself@cdrom.com>
Allow a ppp startup option in rc.conf.
Adjust sysinstall so that it appends to the end of ppp.conf
and uses the generated profile to start ppp in auto mode on
boot.
Submitted by: Josef L. Karthauser <joe@uk.FreeBSD.org>
flamage between our beloved messrs Hearn and Feldman. Further commits go
through me. I urge the contestants to direct their energies at cleaning
up main() in inetd.c, which has over time become a crawling horror.
I've taken time to write up comments for the ident code tonight,
so there should no longer be any confusion about the purpouse of
whatever is in there. Wow, me commenting code... who'd have thought
that would happen?
Reviewed by: DES
Got rid of an extra variable or two, while making corrections to
problems (that would probably not be a problem anyway, and worked.)
Partially Obtained from: David Malone <dwmalone@maths.tcd.ie>
ethernet controllers based on the AIC-6915 "Starfire" controller chip.
There are single port, dual port and quad port cards, plus one 100baseFX
card. All are 64-bit PCI devices, except one single port model.
The Starfire would be a very nice chip were it not for the fact that
receive buffers have to be longword aligned. This requires buffer
copying in order to achieve proper payload alignment on the alpha.
Payload alignment is enforced on both the alpha and x86 platforms.
The Starfire has several different DMA descriptor formats and transfer
mechanisms. This driver uses frame descriptors for transmission which
can address up to 14 packet fragments, and a single fragment descriptor
for receive. It also uses the producer/consumer model and completion
queues for both transmit and receive. The transmit ring has 128
descriptors and the receive ring has 256.
This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus
so that it can be compiled as a loadable kernel module. Support for BPF
and hardware multicast filtering is included.
* Bring memory allocation failure handling in line with that of
the rest of the code.
* Nestle block curlies between case statements correctly.
I've left the in-block declarations alone, since style(9) says we should
conform to the existing style within the code, and inetd already does
this. I've left the asprintf()'s in there because that's how Brian wants
it.
tables, copy them correctly back into our mbuf rather giving a
bzero'd count to memcpy() and ending up with a 0 byte fragment.
The old code resulted in a 0 byte write to the tun device which
tickled a bug that resulted in a panic :-(
example of their usage in the sample config. Merge the two examples
for the green internal auth service.
This commit failed the first time around because Brian beat me to the
punch on inetd.8 . I like my descriptions better and I'm pretty sure
Brian won't mind.
used! I don't declare every variable at the top of a function because
that wastes stack space. I've clarified the error a bit (for if asprintf()
filas.)
Allocate free I/O window with given size to card.
(example)
# IBM PCMCIA Ethernet I/II
card "IBM Corp." "Ethernet"
config 0x1 "ed0" ?
iosize 32
ether 0xff0
(it's currently only useful for externalizing hacks for broken CIS cards,
but it will play an important role with "function" directive I'm planninng
to merge)
Reviewed by: freebsd-mobile list
Obtained from: PAO3's "cardio" directive
1. Cleanups of ident_stream. "Evil" stdio is less used.
2. The BSD Copyright was added to the top of builtins.c.
3. As suggested, a timeout is now implemented in the ident
service. It defaults to 10 seconds. If enough people want
it, I'll make it configurable.
Suggested by: msmith
