There are some explicit comparisions of refcount_release(9) result
with 0/1, which are fine.
Reviewed by: markj, mjg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21014
Update login(1), its manual pages, similar utilities, and motd.5 to refer to
the new location.
Suggested by: delphij@ (re: r349256)
Reviewed by: bcr (manpages), delphij
Differential Revision: https://reviews.freebsd.org/D20721
Allow ABI to be over ridden to allow (with other changes) programs to be
built targeting ABIs other than the default. This is used in CheriBSD.
Reviewed by: imp
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21001
We don't split the other man pages in their own package so do the same for runtime.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20962
This reworks my last commit in r301285 to more closely match what was in
r241298 (but reverted in r294878).
This is addressing "missing .meta file" rebuilds but also ensuring that
files are always generated when needed in each case.
Note that this is not a complete rework of the problem areas identified
in r301285 as most are "good enough" right now as the new pattern
is too verbose. It's only worth making this current change where headers
may be generated in the INCS list; where missing .meta file rebuilds are
spotted.
--- Technical details follow ---
Several attempts to deal with this problem of multi-output targets, with and
without META MODE, were explained in r241298, r294878, and r301285.
The general problem is with multi-output targets such as:
foo.c foo.h:
touch foo.c foo.h
foo.c foo.h:
touch foo.c
touch foo.h
foo.c foo.h: foo.in
./generator ${.ALLSRC}
This pattern is problematic in jobs mode as both files end up being
built concurrently and leads to races. With META MODE it is worse
as both targets end up rebuilding if they lack a .meta file. So the
generator is force built twice even though it is only needed once.
There are also problems in that 'make foo.h' may be ran before 'make foo.c';
The order of make generating the targets is not guaranteed.
An older attempted workaround to this (discussed in r294878) was:
foo.h: foo.c
foo.c: foo.in
./generator ${.ALLSRC}
This appears fine except that if foo.h is missing and foo.c exists then
foo.h will never be regenerated. This pattern is close to the solution
in this commit though:
foo.h: foo.c .NOMETA
.if !exists(foo.h)
foo.c: .PHONY .META
.endif
foo.c: foo.in
./generator ${.ALLSRC}
There's 2 differences here:
1. foo.h will never expect to have a .meta file since the foo.c target
will generate both and own the .meta file.
2. If foo.h does not exist then it needs to force foo.c to be rebuilt
with .PHONY. That normally disables META MODE though so .META is
given to tell bmake we do really expect a .meta file.
This pattern cannot work with implicit suffix rules since the .c and .h files
may be generated at different times (buildincludes vs depend/all).
Sponsored by: Dell EMC
MFC after: 2 weeks
The nvme drive dumps only the most relevant details about a command when it
fails. However, there are times this is not sufficient (such as debugging weird
issues for a new drive with a vendor). Setting hw.nvme.verbose_cmd_dump=1
in loader.conf will enable more complete debugging information about each
command that fails.
Reviewed by: rpokala
Sponsored by: Netflix
Differential Version: https://reviews.freebsd.org/D20988
zone.tab is deprecated. Install zone1970.tab alongside it, and use it
for tzsetup(8). This is also useful for other applications that need
the modern better maintained file.
Reviewed by: philip
Approved by: allanjude (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20646
with various laptops using hdaa(4) sound devices. We don't seem to know
the "correct" configurations for these devices and the defaults are far
superiour, e.g. they work if you don't nuke the default configs.
PR: 200526
Differential Revision: https://reviews.freebsd.org/D17772
Add format capability to core file names to include signal
that generated the core. This can help various validation workflows
where all cores should not be considered equally (SIGQUIT is often
intentional and not an error unlike SIGSEGV or SIGBUS)
Submitted by: David Leimbach (leimy2k@gmail.com)
Reviewed by: markj
MFC after: 1 week
Relnotes: sysctl kern.corefile can now include the signal number
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20970
Casueword(9) on ll/sc architectures must be prepared for userspace
constantly modifying the same cache line as containing the CAS word,
and not loop infinitely. Otherwise, rogue userspace livelocks the
kernel.
To fix the issue, change casueword(9) interface to return new value 1
indicating that either comparision or store failed, instead of relying
on the oldval == *oldvalp comparison. The primitive no longer retries
the operation if it failed spuriously. Modify callers of
casueword(9), all in kern_umtx.c, to handle retries, and react to
stops and requests to terminate between retries.
On x86, despite cmpxchg should not return spurious failures, we can
take advantage of the new interface and just return PSL.ZF.
Reviewed by: andrew (arm64, previous version), markj
Tested by: pho
Reported by: https://xenbits.xen.org/xsa/advisory-295.txt
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D20772
The hold_count and wire_count fields of struct vm_page are separate
reference counters with similar semantics. The remaining essential
differences are that holds are not counted as a reference with respect
to LRU, and holds have an implicit free-on-last unhold semantic whereas
vm_page_unwire() callers must explicitly determine whether to free the
page once the last reference to the page is released.
This change removes the KPIs which directly manipulate hold_count.
Functions such as vm_fault_quick_hold_pages() now return wired pages
instead. Since r328977 the overhead of maintaining LRU for wired pages
is lower, and in many cases vm_fault_quick_hold_pages() callers would
swap holds for wirings on the returned pages anyway, so with this change
we remove a number of page lock acquisitions.
No functional change is intended. __FreeBSD_version is bumped.
Reviewed by: alc, kib
Discussed with: jeff
Discussed with: jhb, np (cxgbe)
Tested by: pho (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19247
Change to use registers instead of register, as it is customary to use
plural when talking about PCI registers.
This was missed in r349150.
MFC after: 3 days
Submitted by: Ka Ho Ng <khng300 at gmail.com>
Reviewed by: mckusick
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20695
Unmapped mbufs allow sendfile to carry multiple pages of data in a
single mbuf, without mapping those pages. It is a requirement for
Netflix's in-kernel TLS, and provides a 5-10% CPU savings on heavy web
serving workloads when used by sendfile, due to effectively
compressing socket buffers by an order of magnitude, and hence
reducing cache misses.
For this new external mbuf buffer type (EXT_PGS), the ext_buf pointer
now points to a struct mbuf_ext_pgs structure instead of a data
buffer. This structure contains an array of physical addresses (this
reduces cache misses compared to an earlier version that stored an
array of vm_page_t pointers). It also stores additional fields needed
for in-kernel TLS such as the TLS header and trailer data that are
currently unused. To more easily detect these mbufs, the M_NOMAP flag
is set in m_flags in addition to M_EXT.
Various functions like m_copydata() have been updated to safely access
packet contents (using uiomove_fromphys()), to make things like BPF
safe.
NIC drivers advertise support for unmapped mbufs on transmit via a new
IFCAP_NOMAP capability. This capability can be toggled via the new
'nomap' and '-nomap' ifconfig(8) commands. For NIC drivers that only
transmit packet contents via DMA and use bus_dma, adding the
capability to if_capabilities and if_capenable should be all that is
required.
If a NIC does not support unmapped mbufs, they are converted to a
chain of mapped mbufs (using sf_bufs to provide the mapping) in
ip_output or ip6_output. If an unmapped mbuf requires software
checksums, it is also converted to a chain of mapped mbufs before
computing the checksum.
Submitted by: gallatin (earlier version)
Reviewed by: gallatin, hselasky, rrs
Discussed with: ae, kp (firewalls)
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20616
This change was originally in D20378. Making it in a new diff since it's a
bugfix.
Submitted by: alfredo.junior_eldorado.org.br
Reviewed by: emaste, luporl
Differential Revision: https://reviews.freebsd.org/D20756
The epoch_drain_callbacks() function is used to drain all pending
callbacks which have been invoked by prior epoch_call() function calls
on the same epoch. This function is useful when there are shared
memory structure(s) referred to by the epoch callback(s) which are not
refcounted and are rarely freed. The typical place for calling this
function is right before freeing or invalidating the shared
resource(s) used by the epoch callback(s). This function can sleep and
is not optimized for performance.
Differential Revision: https://reviews.freebsd.org/D20109
MFC after: 1 week
Sponsored by: Mellanox Technologies
"pin_list" allows to specify child pins as a list of pin numbers.
Existing hint "pins" serves the same purpose but with a 32-bit wide bit
mask. One problem with that is that a controller can have more than 32
pins. One example is amdgpio. Also, a list of numbers is a little bit
more human friendly than a matching bit mask. As a side note, it seems
that in FDT pins are typically specified by their numbers as well.
This commit also adds accessors for instance variables (IVARs) that
define the child pins. My primary goal is to allow a child to be
configured programmatically rather than via hints (assuming that FDT is
not supported on a platform). Also, while a child should not care about
specific pin numbers that are allocated to it, it could be interested in
how many were actually assigned to it.
While there, I removed "flags" instance variable. It was unused.
Reviewed by: mizhka
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20459
"at" keyword is documented in device.hints(5) for all buses, but it does
hurt to add another reference to it.
"pins" keyword is specific to gpiobus.
At least these two hints should be configured for any gpiobus device on
a hints based system.
MFC after: 10 days
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Summary:
Toolchain follow-up to r349350. LLVM patches will be submitted upstream for
9.0 as well.
The bsd.cpu.mk change is required because GNU ld assumes BSS-PLT if it
cannot determine for certain that it needs Secure-PLT, and some binaries do
not compile in such a way to make it know to use Secure-PLT.
Reviewed By: nwhitehorn, bdragon, pfg
Differential Revision: https://reviews.freebsd.org/D20598
Summary:
Adds a list of valid CPUTYPE flags for arm and arm64 architectures
List taken from share/mk/bsd.cpu.mk
Submitted by: Daniel Engberg
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D20315
'-E' appears on the swapon command line, or if "trimonce" appears as
an fstab option.
Discussed at: BSDCAN
Tested by: markj
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision:https://reviews.freebsd.org/D20599
Sort methods alphabetically. Wrap long lines. Start sentences on a new
line. Remove contractions (not because it's a good idea, just to silence
igor). Add some explanation of the units for the period and duty arguments
and the convention for channel numbers.
interfaces were unified into pwmbus(9), and the PWMBUS_CHANNEL_MAX method
was renamed PWMBUS_CHANNEL_COUNT. The pwmbus_attach_bus() function just
went away completely. Also, fix a few typos such as s/is/if/.
As reported in review D20709 by brooks calling vm_map_protect to set a
new max_protection value downgrades existing mappings if necessary (as
opposed to returning an error).
Reported by: brooks
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
It's implied by the man page's RETURN VALUES section, but be explicit in
the description that vm_map_protect can not set new protection bits that
are already in each entry's max_protection.
Reviewed by: brooks
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20709
wakeup_one() and underlying sleepq_signal() spend additional time trying
to be fair, waking thread with highest priority, sleeping longest time.
But in case of taskqueue there are many absolutely identical threads, and
any fairness between them is quite pointless. It makes even worse, since
round-robin wakeups not only make previous CPU affinity in scheduler quite
useless, but also hide from user chance to see CPU bottlenecks, when
sequential workload with one request at a time looks evenly distributed
between multiple threads.
This change adds new SLEEPQ_UNFAIR flag to sleepq_signal(), making it wakeup
thread that went to sleep last, but no longer in context switch (to avoid
immediate spinning on the thread lock). On top of that new wakeup_any()
function is added, equivalent to wakeup_one(), but setting the flag.
On top of that taskqueue(9) is switchied to wakeup_any() to wakeup its
threads.
As result, on 72-core Xeon v4 machine sequential ZFS write to 12 ZVOLs
with 16KB block size spend 34% less time in wakeup_any() and descendants
then it was spending in wakeup_one(), and total write throughput increased
by ~10% with the same as before CPU usage.
Reviewed by: markj, mmacy
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D20669
