specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
it introduced a check after the call to file system's get pages method
that assumes that the get pages method does not change the array of pages
that is passed to it. In the case of vnode_pager_generic_getpages(),
this assumption has been incorrect. The contents of the array of pages
may be shifted by vnode_pager_generic_getpages(). Likely, the problem
has been hidden by vnode_pager_haspage() limiting the set of pages that
are passed to vnode_pager_generic_getpages() such that a shift never
occurs.
The fix implemented herein is to adjust the pointer to the array of pages
rather than shifting the pages within the array.
MFC after: 3 weeks
Fix suggested by: tegge
an error returned by VOP_BMAP() and a hole in the file.
Change the callers to vnode_pager_addr() such that they return
VM_PAGER_ERROR when VOP_BMAP fails instead of a zero-filled page.
Reviewed by: tegge
MFC after: 3 weeks
size aligned requiring heavy usage of vm_page_alloc_contig
This change makes vm_page_alloc_contig SMP safe
Approved by: scottl (acting as backup for mentor rwatson)
vnode_pager_generic_getpages(): (1) that VOP_BMAP() is unsupported by the
underlying file system and (2) an error in performing the VOP_BMAP().
Previously, vnode_pager_generic_getpages() assumed that all errors were
of the first type. If, in fact, the error was of the second type, the
likely outcome was for the process to become permanently blocked on a busy
page.
MFC after: 3 weeks
Reviewed by: tegge
inlined and a procedure call is made in the rare case, i.e., when it is
necessary to sleep. In this case, inlining the test actually makes the
kernel smaller.
page queues-synchronized flag. Reduce the scope of the page queues lock in
vm_fault() accordingly.
Move vm_fault()'s call to vm_object_set_writeable_dirty() outside of the
scope of the page queues lock. Reviewed by: tegge
Additionally, eliminate an unnecessary dereference in computing the
argument that is passed to vm_object_set_writeable_dirty().
synchronized by the lock on the object containing the page.
Transition PG_WANTED and PG_SWAPINPROG to use the new field,
eliminating the need for holding the page queues lock when setting
or clearing these flags. Rename PG_WANTED and PG_SWAPINPROG to
VPO_WANTED and VPO_SWAPINPROG, respectively.
Eliminate the assertion that the page queues lock is held in
vm_page_io_finish().
Eliminate the acquisition and release of the page queues lock
around calls to vm_page_io_finish() in kern_sendfile() and
vfs_unbusy_pages().
Originally, I had adopted sparc64's name, pmap_clear_write(), for the
function that is now pmap_remove_write(). However, this function is more
like pmap_remove_all() than like pmap_clear_modify() or
pmap_clear_reference(), hence, the name change.
The higher-level rationale behind this change is described in
src/sys/amd64/amd64/pmap.c revision 1.567. The short version is that I'm
trying to clean up and fix our support for execute access.
Reviewed by: marcel@ (ia64)
system's machine-dependent and machine-independent layers. Once
pmap_clear_write() is implemented on all of our supported
architectures, I intend to replace all calls to pmap_page_protect() by
calls to pmap_clear_write(). Why? Both the use and implementation of
pmap_page_protect() in our virtual memory system has subtle errors,
specifically, the management of execute permission is broken on some
architectures. The "prot" argument to pmap_page_protect() should
behave differently from the "prot" argument to other pmap functions.
Instead of meaning, "give the specified access rights to all of the
physical page's mappings," it means "don't take away the specified
access rights from all of the physical page's mappings, but do take
away the ones that aren't specified." However, owing to our i386
legacy, i.e., no support for no-execute rights, all but one invocation
of pmap_page_protect() specifies VM_PROT_READ only, when the intent
is, in fact, to remove only write permission. Consequently, a
faithful implementation of pmap_page_protect(), e.g., ia64, would
remove execute permission as well as write permission. On the other
hand, some architectures that support execute permission have
basically ignored whether or not VM_PROT_EXECUTE is passed to
pmap_page_protect(), e.g., amd64 and sparc64. This change represents
the first step in replacing pmap_page_protect() by the less subtle
pmap_clear_write() that is already implemented on amd64, i386, and
sparc64.
Discussed with: grehan@ and marcel@
pointer: When vm_object_deallocate() sleeps because of a non-zero
paging in progress count on either object or object's shadow,
vm_object_deallocate() must ensure that object is still the shadow's
backing object when it reawakens. In fact, object may have been
deallocated while vm_object_deallocate() slept. If so, reacquiring
the lock on object can lead to a deadlock.
Submitted by: ups@
MFC after: 3 weeks
libmemstat(3) is used by vmstat (and friends) to produce more accurate
and more detailed statistics information in a machine-readable way,
and vmstat continues to provide the same text-based front-end.
This change should not be MFC'd.
vm_page_startup(). As a result, we now only lookup the tunable once
instead of looking it up once for every physical page of memory in the
system. This cuts out about a 1 second or so delay in boot on x86
systems. The delay is much larger and more noticable on sun4v apparently.
Reported by: kmacy
MFC after: 1 week
There is a race with the current locking scheme and removing
it should have no measurable performance impact.
This fixes page faults leading to panics in pmap_enter_quick_locked()
on amd64/i386.
Reviewed by: alc,jhb,peter,ps
Found mapped cache page. Specifically, if cnt.v_free_count dips below
cnt.v_free_reserved after p_start has been set to a non-NULL value,
then vm_map_pmap_enter() would break out of the loop and incorrectly
call pmap_enter_object() for the remaining address range. To correct
this error, this revision truncates the address range so that
pmap_enter_object() will not map any cache pages.
In collaboration with: tegge@
Reported by: kris@
These pages are allocated from the direct map, and were not previous
tracked. This included the vm_page_array and the early UMA bootstrap
pages.
Reviewed by: peter
vmspace_exitfree() and vmspace_free() which could result in the same
vmspace being freed twice.
Factor out part of exit1() into new function vmspace_exit(). Attach
to vmspace0 to allow old vmspace to be freed earlier.
Add new function, vmspace_acquire_ref(), for obtaining a vmspace
reference for a vmspace belonging to another process. Avoid changing
vmspace refcount from 0 to 1 since that could also lead to the same
vmspace being freed twice.
Change vmtotal() and swapout_procs() to use vmspace_acquire_ref().
Reviewed by: alc
report this as an allocation failure for the item type. The failure
will be separately recorded with the bucket type. This my eliminate
high mbuf allocation failure counts under some circumstances, which
can be alarming in appearance, but not actually a problem in
practice.
MFC after: 2 weeks
Reported by: ps, Peter J. Blok <pblok at bsd4all dot org>,
OxY <oxy at field dot hu>,
Gabor MICSKO <gmicskoa at szintezis dot hu>
via the debug.minidump sysctl and tunable.
Traditional dumps store all physical memory. This was once a good thing
when machines had a maximum of 64M of ram and 1GB of kvm. These days,
machines often have many gigabytes of ram and a smaller amount of kvm.
libkvm+kgdb don't have a way to access physical ram that is not mapped
into kvm at the time of the crash dump, so the extra ram being dumped
is mostly wasted.
Minidumps invert the process. Instead of dumping physical memory in
in order to guarantee that all of kvm's backing is dumped, minidumps
instead dump only memory that is actively mapped into kvm.
amd64 has a direct map region that things like UMA use. Obviously we
cannot dump all of the direct map region because that is effectively
an old style all-physical-memory dump. Instead, introduce a bitmap
and two helper routines (dump_add_page(pa) and dump_drop_page(pa)) that
allow certain critical direct map pages to be included in the dump.
uma_machdep.c's allocator is the intended consumer.
Dumps are a custom format. At the very beginning of the file is a header,
then a copy of the message buffer, then the bitmap of pages present in
the dump, then the final level of the kvm page table trees (2MB mappings
are expanded into a 4K page mappings), then the sparse physical pages
according to the bitmap. libkvm can now conveniently access the kvm
page table entries.
Booting my test 8GB machine, forcing it into ddb and forcing a dump
leads to a 48MB minidump. While this is a best case, I expect minidumps
to be in the 100MB-500MB range. Obviously, never larger than physical
memory of course.
minidumps are on by default. It would want be necessary to turn them off
if it was necessary to debug corrupt kernel page table management as that
would mess up minidumps as well.
Both minidumps and regular dumps are supported on the same machine.
if the specified priority is zero. This avoids a race where the calling
thread could read a snapshot of it's current priority, then a different
thread could change the first thread's priority, then the original thread
would call sched_prio() inside msleep() undoing the change made by the
second thread. I used a priority of zero as no thread that calls msleep()
or tsleep() should be specifying a priority of zero anyway.
The various places that passed 'curthread->td_priority' or some variant
as the priority now pass 0.
Kernel changes:
Inform hwpmc of executable objects brought into the system by
kldload() and mmap(), and of their removal by kldunload() and
munmap(). A helper function linker_hwpmc_list_objects() has been
added to "sys/kern/kern_linker.c" and is used by hwpmc to retrieve
the list of currently loaded kernel modules.
The unused `MAPPINGCHANGE' event has been deprecated in favour
of separate `MAP_IN' and `MAP_OUT' events; this change reduces
space wastage in the log.
Bump the hwpmc's ABI version to "2.0.00". Teach hwpmc(4) to
handle the map change callbacks.
Change the default per-cpu sample buffer size to hold
32 samples (up from 16).
Increment __FreeBSD_version.
libpmc(3) changes:
Update libpmc(3) to deal with the new events in the log file; bring
the pmclog(3) manual page in sync with the code.
pmcstat(8) changes:
Introduce new options to pmcstat(8): "-r" (root fs path), "-M"
(mapfile name), "-q"/"-v" (verbosity control). Option "-k" now
takes a kernel directory as its argument but will also work with
the older invocation syntax.
Rework string handling in pmcstat(8) to use an opaque type for
interned strings. Clean up ELF parsing code and add support for
tracking dynamic object mappings reported by a v2.0.00 hwpmc(4).
Report statistics at the end of a log conversion run depending
on the requested verbosity level.
Reviewed by: jhb, dds (kernel parts of an earlier patch)
Tested by: gallatin (earlier patch)
be called without any vnode locks held. Remove calls to vn_start_write() and
vn_finished_write() in vnode_pager_putpages() and add these calls before the
vnode lock is obtained to most of the callers that don't already have them.
object that requires Giant in vm_object_deallocate(). This is somewhat
hairy in that if we can't obtain Giant directly, we have to drop the
object lock, then lock Giant, then relock the object lock and verify that
we still need Giant. If we don't (because the object changed to OBJT_DEAD
for example), then we drop Giant before continuing.
Reviewed by: alc
Tested by: kris
and it has not plenty of free pages it tries to free pages in the cache queue.
Unfortunately freeing a cached page requires the locking of the object that
owns the page. However in the context of allocating pages we may not be able
to lock the object and thus can only TRY to lock the object. If the locking try
fails the cache page can not be freed and is activated to move it out of the way
so that we may try to free other cache pages.
If all pages in the cache belong to objects that are currently locked the
cache queue can be emptied without freeing a single page. This scenario caused
two problems:
1) vm_page_alloc always failed allocation when it tried freeing pages from
the cache queue and failed to do so. However if there are more than
cnt.v_interrupt_free_min pages on the free list it should return pages
when requested with priority VM_ALLOC_SYSTEM. Failure to do so can cause
resource exhaustion deadlocks.
2) Threads than need to allocate pages spend a lot of time cleaning up the
page queue without really getting anything done while the pagedaemon
needs to work overtime to refill the cache.
This change fixes the first problem. (1)
Reviewed by: tegge@
lock also protects this flag so it is not necessary.
- Don't rely on v_mount to detect whether or not we've been recycled, use
the more appropriate VI_DOOMED instead.
Sponsored by: Isilon Systems, Inc.
MFC After: 1 week
The former type, size_t, was causing truncation to 32 bits on i386,
which immediately led to undersizing of VM objects backed by
files >4GB. In particular, sendfile(2) was broken for such files.
PR: kern/92243
MFC after: 5 days
It detects both: buffer underflows and buffer overflows bugs at runtime
(on free(9) and realloc(9)) and prints backtraces from where memory was
allocated and from where it was freed.
Tested by: kris
of physical RAM instead of the bottom was a sound idea, but the implementation
left a lot to be desired. Scans would spend considerable time looking at
pages that are above of the address range given by the caller, and multiple
calls (like what happens in busdma) would spend more time on top of that
rescanning the same pages over and over.
Solve this, at least for now, with two simple optimizations. The first is
to not bother scanning high ordered pages that are outside of the provided
address range. Second is to cache the page index from the last successful
operation so that subsequent scans don't have to restart from the top. This
is conditional on the numpages argument being the same or greater between
calls.
MFC After: 2 weeks
The difference between WITNESS_CHECK() and WITNESS_WARN() is that
WITNESS_CHECK() should be used in the places that the return value of
witness_warn() is checked, whereas WITNESS_WARN() should be used in places
where the return value is ignored. Specifically, in a kernel without
WITNESS enabled, WITNESS_WARN() evaluates to an empty string where as
WITNESS_CHECK evaluates to 0. I also updated the one place that was
checking the return value of WITNESS_WARN() to use WITNESS_CHECK.
they are. They should be NULL at this point, except if we're coming from
swapdev_strategy().
It should only affect the case where we're swapping directly on a file over
NFS.
the resident page count matches the object size. We know it fully backs
its parent in this case.
Reviewed by: acl, tegge
Sponsored by: Isilon Systems, Inc.
statement. Specifically, a break statement that previously broke out of
the enclosing switch was not changed. Consequently, the enclosing loop
terminated prematurely.
This could result in "vm_page_insert: page already inserted" panics.
Submitted by: tegge
- provide an interface (macros) to the page coloring part of the VM system,
this allows to try different coloring algorithms without the need to
touch every file [1]
- make the page queue tuning values readable: sysctl vm.stats.pagequeue
- autotuning of the page coloring values based upon the cache size instead
of options in the kernel config (disabling of the page coloring as a
kernel option is still possible)
MD changes:
- detection of the cache size: only IA32 and AMD64 (untested) contains
cache size detection code, every other arch just comes with a dummy
function (this results in the use of default values like it was the
case without the autotuning of the page coloring)
- print some more info on Intel CPU's (like we do on AMD and Transmeta
CPU's)
Note to AMD owners (IA32 and AMD64): please run "sysctl vm.stats.pagequeue"
and report if the cache* values are zero (= bug in the cache detection code)
or not.
Based upon work by: Chad David <davidc@acns.ab.ca> [1]
Reviewed by: alc, arch (in 2004)
Discussed with: alc, Chad David, arch (in 2004)
- Provide tunable vm.memguard.desc, so one can specify memory type without
changing the code and recompiling the kernel.
- Allow to use memguard for kernel modules by providing sysctl
vm.memguard.desc, which can be changed to short description of memory
type before module is loaded.
- Move as much memguard code as possible to memguard.c.
- Add sysctl node vm.memguard. and move memguard-specific sysctl there.
- Add malloc_desc2type() function for finding memory type based on its
short description (ks_shortdesc field).
- Memory type can be changed (via vm.memguard.desc sysctl) only if it
doesn't exist (will be loaded later) or when no memory is allocated yet.
If there is allocated memory for the given memory type, return EBUSY.
- Implement two ways of memory types comparsion and make safer/slower the
default.
ephemeral mappings that are used as the source for three copy
operations from kernel space to user space. There are two reasons for
making this change: (1) Under heavy load exec_map can fill up causing
vm_map_find() to fail. When it fails, the nascent process is aborted
(SIGABRT). Whereas, this reimplementation using sf_buf_alloc()
sleeps. (2) Although it is possible to sleep on vm_map_find()'s
failure until address space becomes available (see kmem_alloc_wait()),
using sf_buf_alloc() is faster. Furthermore, the reimplementation
uses a CPU private mapping, avoiding a TLB shootdown on
multiprocessors.
Problem uncovered by: kris@
Reviewed by: tegge@
MFC after: 3 weeks
reclamation synchronously from get_pv_entry() instead of
asynchronously as part of the page daemon. Additionally, limit the
reclamation to inactive pages unless allocation from the PV entry zone
or reclamation from the inactive queue fails. Previously, reclamation
destroyed mappings to both inactive and active pages. get_pv_entry()
still, however, wakes up the page daemon when reclamation occurs. The
reason being that the page daemon may move some pages from the active
queue to the inactive queue, making some new pages available to future
reclamations.
Print the "reclaiming PV entries" message at most once per minute, but
don't stop printing it after the fifth time. This way, we do not give
the impression that the problem has gone away.
Reviewed by: tegge
by the zero-copy sockets method, and written to before the transmission
completes, we need to destroy all of the existing mappings to the page,
not just the one that we fault on. Otherwise, the mappings will no longer
be to the same page and changes made through one of the mappings will not
be visible through the others.
Observed by: tegge
If a copy-on-write fault occurs on the page, the new copy should inherit
a part of the original page's wire count.
Submitted by: tegge
MFC after: 1 week
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
vm_object_backing_scan() was not written to handle. Specifically, a wired
page within a backing object that is shadowed by a page within the shadow
object. Handle this state by removing the wired page from the backing
object. The wired page will be freed by socow_iodone().
Stop masking errors: If a page is being freed by vm_object_backing_scan(),
assert that it is no longer mapped rather than quietly destroying any
mappings.
Tested by: Harald Schmalzbauer
Before this change a copy operation with cp(1) would not update the
file access times.
According to the POSIX mmap(2) documentation: the st_atime field
of the mapped file may be marked for update at any time between the
mmap() call and the corresponding munmap() call. The initial read
or write reference to a mapped region shall cause the file's st_atime
field to be marked for update if it has not already been marked for
update.
I'm not sure this is the right thing to do, but at least I don't panic
anymore when swapping on a NFS file without using md(4).
X-MFC after: proper review
UMA boot pages.
Disable recursion on the general UMA lock now that startup_alloc() no
longer uses it.
Eliminate the variable uma_boot_free. It serves no purpose.
Note: This change eliminates a lock-order reversal between a system
map mutex and the UMA lock. See
http://sources.zabbadoz.net/freebsd/lor.html#109 for details.
MFC after: 3 days
vm_pager_init() is run before required nswbuf variable has been set
to correct value. This caused system to run with single pbuf available
for vnode_pager. Handle both cluster_pbuf_freecnt and vnode_pbuf_freecnt
variable in the same way.
Reported by: ade
Obtained from: alc
MFC after: 2 days
due to the vm object being locked.
When a process writes large amounts of data to a file, the vm object associated
with that file can contain most of the physical pages on the machine. If the
process is preempted while holding the lock on the vm object, pagedaemon would
be able to move very few pages from PQ_INACTIVE to PQ_CACHE or from PQ_ACTIVE
to PQ_INACTIVE, resulting in unlimited cleaning of dirty pages belonging to
other vm objects.
Temporarily unlock the page queues lock while locking vm objects to avoid lock
order violation. Detect and handle relevant page queue changes.
This change depends on both the lock portion of struct vm_object and normal
struct vm_page being type stable.
Reviewed by: alc
as opt_vmpage.h will not be available to user space library builds. A
similar existing check is present for KLD_MODULE for similar reasons.
MFC after: 3 days
monitoring API, which might or might not be the same as the internal
maximum (currently none).
Export flag information on UMA zones -- in particular, whether or
not this is a secondary zone, and so the keg free count should be
considered in that light.
MFC after: 1 day
make the b_iodone callback responsible for setting it if it is needed.
Previously, it was set unconditionally by bufdone() without holding
whichever lock is shared by the b_iodone callback and the corresponding
top-half function. Consequently, in a race, the top-half function could
conclude that operation was done before the b_iodone callback finished.
See, for example, aio_physwakeup() and aio_fphysio().
Note: I don't believe that the other, more widely-used b_iodone callbacks
are affected.
Discussed with: jeff
Reviewed by: phk
MFC after: 2 weeks
- Add a new uma_zfree_internal() flag, ZFREE_STATFREE, which causes it to
to update the zone's uz_frees statistic. Previously, the statistic was
updated unconditionally.
- Use the flag in situations where a "real" free occurs: i.e., one where
the caller is freeing an allocated item, to be differentiated from
situations where uma_zfree_internal() is used to tear down the item
during slab teardown in order to invoke its fini() method. Also use
the flag when UMA is freeing its internal objects.
- When exchanging a bucket with the zone from the per-CPU cache when
freeing an item, flush cache statistics back to the zone (since the
zone lock and critical section are both held) to match the allocation
case.
MFC after: 3 days
per-CPU cache statistics. UMA sizes the cache array based on the
number of CPUs at boot (mp_maxid + 1), and iterating based on MAXCPU
could read off the end of the array (into the next zone).
Reported by: yongari
MFC after: 1 week
it covers the following of the uc_alloc/freebucket cache pointers.
Originally, I felt that the race wasn't helped by holding the mutex,
hence a comment in the code and not holding it across the cache access.
However, it does improve consistency, as while it doesn't prevent
bucket exchange, it does prevent bucket pointer invalidation. So a
race in gathering cache free space statistics still can occur, but not
one that follows an invalid bucket pointer, if the mutex is held.
Submitted by: yongari
MFC after: 1 week
fs.first_object->flags & OBJ_NEEDGIANT test that was missed in an earlier
revision. This fixes mutex assertion failures in the debug.mpsafevm=0
case.
Reported by: ps
MFC after: 3 days
statistics via a binary structure stream:
- Add structure 'uma_stream_header', which defines a stream version,
definition of MAXCPUs used in the stream, and the number of zone
records in the stream.
- Add structure 'uma_type_header', which defines the name, alignment,
size, resource allocation limits, current pages allocated, preferred
bucket size, and central zone + keg statistics.
- Add structure 'uma_percpu_stat', which, for each per-CPU cache,
includes the number of allocations and frees, as well as the number
of free items in the cache.
- When the sysctl is queried, return a stream header, followed by a
series of type descriptions, each consisting of a type header
followed by a series of MAXCPUs uma_percpu_stat structures holding
per-CPU allocation information. Typical values of MAXCPU will be
1 (UP compiled kernel) and 16 (SMP compiled kernel).
This query mechanism allows user space monitoring tools to extract
memory allocation statistics in a machine-readable form, and to do so
at a per-CPU granularity, allowing monitoring of allocation patterns
across CPUs in order to better understand the distribution of work and
memory flow over multiple CPUs.
While here, also export the number of UMA zones as a sysctl
vm.uma_count, in order to assist in sizing user swpace buffers to
receive the stream.
A follow-up commit of libmemstat(3), a library to monitor kernel memory
allocation, will occur in the next few days. This change directly
supports converting netstat(1)'s "-mb" mode to using UMA-sourced stats
rather than separately maintained mbuf allocator statistics.
MFC after: 1 week
zone whenever it was moving buckets between the zone and the cache,
or when coalescing statistics across the CPU. Remove flushing of
statistics to the zone when coalescing statistics as part of sysctl,
as we won't be running on the right CPU to write to the cache
statistics.
Add a missed gathering of statistics: when uma_zalloc_internal()
does a special case allocation of a single item, make sure to update
the zone statistics to represent this. Previously this case wasn't
accounted for in user-visible statistics.
MFC after: 1 week
many regions checked again and again despite knowing the pages
contained were not usable and only satisfied the alignment constraints
This case was compounded, especially for large allocations, by the
practice of looping from the top of memory so as to keep out of the
important low-memory regions. While the old contigmalloc(9) has the
same problem, it is not as noticeable due to looping from the low
memory to high.
This degenerate case is fixed, as well as reversing the sense of the
rest of the loops within it, to provide a tremendous speed increase.
This makes the best case O(n * VM overhead) much more likely than the
worst case O(4 * VM overhead). For comparison, the worst case for old
contigmalloc would be O(5 * VM overhead) in addition to its strategy
of turning used memory into free being highly pessimal.
Also, fix a bug that in practice most likely couldn't have been triggered,
int the new contigmalloc(9): it walked backwards from the end of memory
without accounting for how many pages it needed. Potentially, nonexistant
pages could have been mapped. This hasn't occurred because the kernel
generally requests as its first contigmalloc(9) a single page.
Reported by: Nicolas Dehaine <nicko@stbernard.com>, wes
MFC After: 1 month
More testing by: Nicolas Dehaine <nicko@stbernard.com>, wes
vm_page's machine-dependent fields. Use this function in
vm_pageq_add_new_page() so that the vm_page's machine-dependent and
machine-independent fields are initialized at the same time.
Remove code from pmap_init() for initializing the vm_page's
machine-dependent fields.
Remove stale comments from pmap_init().
Eliminate the Boolean variable pmap_initialized from the alpha, amd64,
i386, and ia64 pmap implementations. Its use is no longer required
because of the above changes and earlier changes that result in physical
memory that is being mapped at initialization time being mapped without
pv entries.
Tested by: cognet, kensmith, marcel
underlying vnode requires Giant.
- In vm_fault only acquire Giant if the underlying object has NEEDSGIANT
set.
- In vm_object_shadow inherit the NEEDSGIANT flag from the backing object.
mutexes, which offers lower overhead on both UP and SMP. When allocating
from or freeing to the per-cpu cache, without INVARIANTS enabled, we now
no longer perform any mutex operations, which offers a 1%-3% performance
improvement in a variety of micro-benchmarks. We rely on critical
sections to prevent (a) preemption resulting in reentrant access to UMA on
a single CPU, and (b) migration of the thread during access. In the event
we need to go back to the zone for a new bucket, we release the critical
section to acquire the global zone mutex, and must re-acquire the critical
section and re-evaluate which cache we are accessing in case migration has
occured, or circumstances have changed in the current cache.
Per-CPU cache statistics are now gathered lock-free by the sysctl, which
can result in small races in statistics reporting for caches.
Reviewed by: bmilekic, jeff (somewhat)
Tested by: rwatson, kris, gnn, scottl, mike at sentex dot net, others
the number of entries in exec_map (maximum number of simultaneous execs
that can be handled by the kernel). The default value of 16 is
insufficient on heavily loaded machines (particularly SMP machines), and
if it is exceeded then executing further processes will generate a SIGABRT.
This is a workaround until a better solution can be implemented.
Reviewed by: alc
MFC after: 3 days
of physical addresses. The pages containing these physical addresses will
not be added to the free list and thus will effectively be ignored by the
VM system. This is mostly useful for the case when one knows of specific
physical addresses that have bit errors (such as from a memtest run) so
that one can blacklist the bad pages while waiting for the new sticks of
RAM to arrive. The physical addresses of any ignored pages are listed in
the message buffer as well.
MAP_SHARED so that the entry point gets executed un-conditionally.
This may be useful for security policies which want to perform access
control checks around run-time linking.
-add the mmap(2) flags argument to the check_vnode_mmap entry point
so that we can make access control decisions based on the type of
mapped object.
-update any dependent API around this parameter addition such as
function prototype modifications, entry point parameter additions
and the inclusion of sys/mman.h header file.
-Change the MLS, BIBA and LOMAC security policies so that subject
domination routines are not executed unless the type of mapping is
shared. This is done to maintain compatibility between the old
vm_mmap_vnode(9) and these policies.
Reviewed by: rwatson
MFC after: 1 month
down. If we have dirty pages, the putpages routine will need to know
what the vnode's object is so that it may write out dirty pages.
Pointy hat: phk
Found by: obrien
the type of object represented by the handle argument.
- Allow vm_mmap() to map device memory via cdev objects in addition to
vnodes and anonymous memory. Note that mmaping a cdev directly does not
currently perform any MAC checks like mapping a vnode does.
- Unbreak the DRM getbufs ioctl by having it call vm_mmap() directly on the
cdev the ioctl is acting on rather than trying to find a suitable vnode
to map from.
Reviewed by: alc, arch@
queues lock in vm_object_backing_scan(). Updates to the page's PG_BUSY
flag and busy field are synchronized by the containing object's lock.
Testing the page's hold_count and wire_count in vm_object_backing_scan()'s
OBSC_COLLAPSE_NOWAIT case is unnecessary. There is no reason why the held
or wired pages cannot be migrated to the shadow object.
Reviewed by: tegge
is inserted.
- In vm_page_remove() drop the backing vnode when the last page
is removed.
- Don't check the vnode to see if it must be reclaimed on every
call to vm_page_free_toq() as we only check it now when it is
actually required. This saves us two lock operations per call.
Sponsored by: Isilon Systems, Inc.
patch from kan@).
Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on
close. This is not yet a generally safe function, but for this very
specific use it is safe. This solves the problem with buffers not
being flushed by unmount or after failed mount attempts.
statement from some files, so re-add it for the moment, until the
related legalese is sorted out. This change affects:
sys/kern/kern_mbuf.c
sys/vm/memguard.c
sys/vm/memguard.h
sys/vm/uma.h
sys/vm/uma_core.c
sys/vm/uma_dbg.c
sys/vm/uma_dbg.h
sys/vm/uma_int.h
UMA_ZONE_REFCNT and UMA_ZONE_MALLOC zones, as the page(s) undoubtedly
came from kmem_map for those two. Previously it would set it back
to NULL for UMA_ZONE_REFCNT zones and although this was probably not
fatal, it added MORE code for no reason.
an unused pageq queue reference in the page structure to stash a pointer
to the MemGuard FIFO. Using the page->object field caused problems
because when vm_map_protect() was called the second time to set
VM_PROT_DEFAULT back onto a set of pages in memguard_map, the protection
in the VM would be changed but the PMAP code would lazily not restore
the PG_RW bit on the underlying pages right away (see pmap_protect()).
So when a page fault finally occured and the VM noticed the faulting
address corresponds to a page that _does_ have write access now, it
would then call into PMAP to set back PG_RW (i386 case being discussed
here). However, before it got to do that, an assertion on the object
lock not being owned would get triggered, as the object of the faulting
page would need to be locked but was overloaded by MemGuard. This is
precisely why MemGuard cannot overload page->object.
Submitted by: Alan Cox (alc@)
a little bit of complexity but performance requirements lacking (this is
a debugging allocator after all), it's really not too bad (still
only 317 lines).
Also add an additional check to help catch really weird 3-threads-involved
races: make memguard_free() write to the first page handed back, always,
before it does anything else.
Note that there is still a problem in VM+PMAP (specifically with
vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly
and this change stands on its own.
the name Sande^H^H^H^H^Hvnode_create_vobject().
Make the new function take a size argument which removes the need for
a VOP_STAT() or a very pessimistic guess for disks.
Call that new function from vop_stdcreatevobject().
Make vnode_pager_alloc() private now that its only user came home.
- Use VFS_LOCK_GIANT() rather than directly acquiring giant in places
where giant is only held because vfs requires it.
Sponsored By: Isilon Systems, Inc.
designed to help detect tamper-after-free scenarios, a problem more
and more common and likely with multithreaded kernels where race
conditions are more prevalent.
Currently MemGuard can only take over malloc()/realloc()/free() for
particular (a) malloc type(s) and the code brought in with this
change manually instruments it to take over M_SUBPROC allocations
as an example. If you are planning to use it, for now you must:
1) Put "options DEBUG_MEMGUARD" in your kernel config.
2) Edit src/sys/kern/kern_malloc.c manually, look for
"XXX CHANGEME" and replace the M_SUBPROC comparison with
the appropriate malloc type (this might require additional
but small/simple code modification if, say, the malloc type
is declared out of scope).
3) Build and install your kernel. Tune vm.memguard_divisor
boot-time tunable which is used to scale how much of kmem_map
you want to allott for MemGuard's use. The default is 10,
so kmem_size/10.
ToDo:
1) Bring in a memguard(9) man page.
2) Better instrumentation (e.g., boot-time) of MemGuard taking
over malloc types.
3) Teach UMA about MemGuard to allow MemGuard to override zone
allocations too.
4) Improve MemGuard if necessary.
This work is partly based on some old patches from Ian Dowse.
and BBO is BO's backing object. Now, suppose that O and BO are being
collapsed. Furthermore, suppose that BO has been marked dead
(OBJ_DEAD) by vm_object_backing_scan() and that either
vm_object_backing_scan() has been forced to sleep due to encountering
a busy page or vm_object_collapse() has been forced to sleep due to
memory allocation in the swap pager. If vm_object_deallocate() is
then called on BBO and BO is BBO's only shadow object,
vm_object_deallocate() will collapse BO and BBO. In doing so, it adds
a necessary temporary reference to BO. If this collapse also sleeps
and the prior collapse resumes first, the temporary reference will
cause vm_object_collapse to panic with the message "backing_object %p
was somehow re-referenced during collapse!"
Resolve this race by changing vm_object_deallocate() such that it
doesn't collapse BO and BBO if BO is marked dead. Once O and BO are
collapsed, vm_object_collapse() will attempt to collapse O and BBO.
So, vm_object_deallocate() on BBO need do nothing.
Reported by: Peter Holm on 20050107
URL: http://www.holm.cc/stress/log/cons102.html
In collaboration with: tegge@
Candidate for RELENG_4 and RELENG_5
MFC after: 2 weeks
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:
The credentials for syncing a file (ability to write to the
file) should be checked at the system call level.
Credentials for syncing one or more filesystems ("none")
should be checked at the system call level as well.
If the filesystem implementation needs a particular credential
to carry out the syncing it would logically have to the
cached mount credential, or a credential cached along with
any delayed write data.
Discussed with: rwatson
recursion from the VM is handled (and the calling code that allocates
buckets knows how to deal with it), we do not want to prevent allocation
from the slab header zones (slabzone and slabrefzone) if uk_recurse is
not zero for them. The reason is that it could lead to NULL being
returned for the slab header allocations even in the M_WAITOK
case, and the caller can't handle that (this is also explained in a
comment with this commit).
The problem analysis is documented in our mailing lists:
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=153445+0+archive/2004/freebsd-current/20041231.freebsd-current
(see entire thread for proper context).
Crash dump data provided by: Peter Holm <peter@holm.cc>
queue and (possibly) unlocking the containing object from
vm_page_alloc() to vm_page_select_cache(). Recent optimizations to
vm_map_pmap_enter() (see vm_map.c revisions 1.362 and 1.363) and
pmap_enter_quick() have resulted in panic()s because vm_page_alloc()
mistakenly unlocked objects that had not been locked by
vm_page_select_cache().
Reported by: Peter Holm and Kris Kennaway
queue to the free queue. With this change, if a page from the cache
queue belongs to a locked object, it is simply skipped over rather
than moved to the inactive queue.
flag and busy field with the global page queues lock to synchronizing their
access with the containing object's lock. Specifically, acquire the
containing object's lock before reading the page's PG_BUSY flag and busy
field in vm_fault().
Reviewed by: tegge@
on entry and it assumes the responsibility for releasing the page queues
lock if it must sleep.
Remove a bogus comment from pmap_enter_quick().
Using the first change, modify vm_map_pmap_enter() so that the page queues
lock is acquired and released once, rather than each time that a page
is mapped.
In such cases, the busying of the page and the unlocking of the
containing object by vm_map_pmap_enter() and vm_fault_prefault() is
unnecessary overhead. To eliminate this overhead, this change
modifies pmap_enter_quick() so that it expects the object to be locked
on entry and it assumes the responsibility for busying the page and
unlocking the object if it must sleep. Note: alpha, amd64, i386 and
ia64 are the only implementations optimized by this change; arm,
powerpc, and sparc64 still conservatively busy the page and unlock the
object within every pmap_enter_quick() call.
Additionally, this change is the first case where we synchronize
access to the page's PG_BUSY flag and busy field using the containing
object's lock rather than the global page queues lock. (Modifications
to the page's PG_BUSY flag and busy field have asserted both locks for
several weeks, enabling an incremental transition.)
revision 1.55, the address parameter to vnode_pager_addr() was changed
from an unsigned 32-bit quantity to a signed 64-bit quantity. However,
an out-of-range check on the address was not updated. Consequently,
memory-mapped I/O on files greater than 2GB could cause a kernel panic.
Since the address is now a signed 64-bit quantity, the problem resolution
is simply to remove a cast.
Reviewed by: bde@ and tegge@
PR: 73010
MFC after: 1 week
to implement the sanity check should have been changed when we converted
the implementation of vm_pindex_t from 32 to 64 bits. (Thus, RELENG_4 is
not affected.) The consequence of this error would be a legimate write to
an extremely large file being treated as an errant attempt to write meta-
data.
Discussed with: tegge@
Historically, our contigmalloc1() and contigmalloc2() assumes
that a page in PQ_CACHE can be unconditionally reused by busying
and freeing it. Unfortunatelly, when object happens to be not
NULL, the code will set m->object to NULL and disregard the fact
that the page is actually in the VM page bucket, resulting in
page bucket hash table corruption and finally, a filesystem
corruption, or a 'page not in hash' panic.
This commit has borrowed the idea taken from DragonFlyBSD's fix
to the VM fix by Matthew Dillon[1]. This version of patch will
do the following checks:
- When scanning pages in PQ_CACHE, check hold_count and
skip over pages that are held temporarily.
- For pages in PQ_CACHE and selected as candidate of being
freed, check if it is busy at that time.
Note: It seems that this is might be unrelated to kern/72539.
Obtained from: DragonFlyBSD, sys/vm/vm_contig.c,v 1.11 and 1.12 [1]
Reminded by: Matt Dillon
Reworked by: alc
MFC After: 1 week
instead of a vnode for it.
The vnode_pager does not and should not have any interest in what
the filesystem uses for backend.
(vfs_cluster doesn't use the backing store argument.)
includes the latter, but also declares variables which are defined
in kern/subr_param.c).
Change som VM parameters from quad_t to unsigned long. They refer to
quantities (size limits for text, heap and stack segments) which must
necessarily be smaller than the size of the address space, so long is
adequate on all platforms.
MFC after: 1 week
number of entries into bucket_zone_lookup(), which helps make more
clear the logic of consumers of bucket zones.
Annotate the behavior of bucket_init() with a comment indicating
how the various data structures, including the bucket lookup tables,
are initialized.
swapoff: failed to locate %d swap blocks
The race occurred because putpages() can block between the time it
allocates swap space and the time it updates the swap metadata to
associate that space with a vm_object, so swapoff() would complain
about the temporary inconsistency. I hoped to fix this by making
swp_pager_getswapspace() and swp_pager_meta_build() a single atomic
operation, but that proved to be inconvenient. With this change,
swapoff() simply doesn't attempt to be so clever about detecting when
all the pageout activity to the target device should have drained.
because this call is only needed to wake threads that slept when they
discovered a dead object connected to a vnode. To eliminate unnecessary
calls to wakeup() by vnode_pager_dealloc(), introduce a new flag,
OBJ_DISCONNECTWNT.
Reviewed by: tegge@
thread is created rather than adjusting the priority in the main
function. (kthread_create() should probably take the initial priority
as an argument.)
- Only yield the CPU in the !PREEMPTION case if there are any other
runnable threads. Yielding when there isn't anything else better to do
just wastes time in pointless context switches (albeit while the system
is idle.)
In order to avoid livelock, swapoff() skips over objects with a
nonzero pip count and makes another pass if necessary. Since it is
impossible to know which objects we care about, it would choose an
arbitrary object with a nonzero pip count and wait for it before
making another pass, the theory being that this object would finish
paging about as quickly as the ones we care about. Unfortunately,
we may have slept since we acquired a reference to this object.
Hack around this problem by tsleep()ing on the pointer anyway, but
timeout after a fixed interval. More elegant solutions are possible,
but the ones I considered unnecessarily complicate this rare case.
Also, kill some nits that seem to have crept into the swapoff() code
in the last 75 revisions or so:
- Don't pass both sp and sp->sw_used to swap_pager_swapoff(), since
the latter can be derived from the former.
- Replace swp_pager_find_dev() with something simpler. There's no
need to iterate over the entire list of swap devices just to determine
if a given block is assigned to the one we're interested in.
- Expand the scope of the swhash_mtx in a couple of places so that it
isn't released and reacquired once for every hash bucket.
- Don't drop the swhash_mtx while holding a reference to an object.
We need to lock the object first. Unfortunately, doing so would
violate the established lock order, so use VM_OBJECT_TRYLOCK() and
try again on a subsequent pass if the object is already locked.
- Refactor swp_pager_force_pagein() and swap_pager_swapoff() a bit.
need for most calls to vm_page_busy(). Specifically, most calls to
vm_page_busy() occur immediately prior to a call to vm_page_remove().
In such cases, the containing vm object is locked across both calls.
Consequently, the setting of the vm page's PG_BUSY flag is not even
visible to other threads that are following the synchronization
protocol.
This change (1) eliminates the calls to vm_page_busy() that
immediately precede a call to vm_page_remove() or functions, such as
vm_page_free() and vm_page_rename(), that call it and (2) relaxes the
requirement in vm_page_remove() that the vm page's PG_BUSY flag is
set. Now, the vm page's PG_BUSY flag is set only when the vm object
lock is released while the vm page is still in transition. Typically,
this is when it is undergoing I/O.
