a number of cores, this allows for a sparse set of CPUs. Implement support
for sparse core masks on Octeon.
XXX jeff@ suggests that all_cpus should include cores that are offline or
running other applications/OSes, so the platform API should be further
extended to allow us to set all_cpus to include all cores that are
physically-present as opposed to only those that are running FreeBSD.
Submitted by: Bhanu Prakash (with modifications)
Reviewed by: jchandra
Glanced at by: kib, jeff, jhb
KASSERT()s and eliminate the rest.
Replace excessive printf()s and a panic() in bufdone_finish() with a
KASSERT() in vm_page_io_finish().
Reviewed by: kib
Resort the CURVNET_SET* macros in the non-VNET_DEBUG case to match
the call order of the VNET_DEBUG case.
Add the VNET_ASSERT() to the non-VNET_DEBUG case as well so that
INVARIANTS will still catch problems.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
MFC after: 2 weeks
Make VNET_ASSERT() available with either VNET_DEBUG or INVARIANTS.
Change the syntax to match KASSERT() to allow more flexible panic
messages rather than having a printf with hardcoded arguments
before panic.
Adjust the few assertions we have to the new format (and enhance
the output).
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
MFC after: 2 weeks
attached, activate the page after the successful read, and free the page
if read was unsuccessfull.
Freshly allocated page is not on any queue yet, and not activating (or
deactivating) the page leaves it on no queue, excluding the page from
pagedaemon scans and making the memory disappeared until the vnode
reclaimed.
Reviewed by: avg
MFC after: 1 week
- this also includes virtualization support on these devices
Correct some vlan issues we were seeing in test, jumbo frames on vlans
did not work correctly, this was all due to confused logic around HW
filters, the new code should now work for all uses.
Important fix: when mbuf resources are depeleted, it was possible to
completely empty the RX ring, and then the RX engine would stall
forever. This is fixed by a flag being set whenever the refresh code
fails due to an mbuf shortage, also the local timer now makes sure
that all queues get an interrupt when it runs, the interrupt code
will then always call rxeof, and in that routine the first thing done
is now to check the refresh flag and call refresh_mbufs. This has been
verified to fix this type 'hang'. Similar code will follow in the other
drivers.
Finally, sync up shared code for the I350 support.
Thanks to everyone that has been reporting issues, and helping in the
debug/test process!!
to construct the full pathname. It starts to search at the default
mountpoint which is /dev/shm. If this fails it runs through fstab
and searches for shmfs and tmpfs. Whatever it finds will be
statfs()'ed to be checked for Linux' fs magic for shmfs (0x01021994).
Ideally our tmpfs should deliver this fs magic to Linux processes, but
as our tmpfs is considered to be an experimental feature we can not
assume that there is always a tmpfs available.
To make shared memory work in the Linuxulator, force the fs type of
/dev/shm (which can be a symlink) to match what Linux expects. The user
is responsible (info has to be added to the linux base ports and the docs)
to setup a suitable link for /dev/shm.
Noticed by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
Submitted by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
MFC after: 1 month
attributes for preloaded modules/images. In particular, MODINFO_ADDR has
the added complexity of not always being relocated properly. Rather than
kluging this in the various components that are affected, we handle it
in a centralized place (preload_fetch_addr()). To that end, expose a new
variable, preload_addr_relocate, that MD initialization code can set and
that turns the address attribute into a valid kernel VA.
Architectures that need the relocation: arm & powerpc (at least).
Components that can utilize this: acpi(4), md(4), fb(4), pci(4), ZFS, geli.
Sponsored by: Juniper Networks
Drivers which rely on net80211 to create the beacon need to call
ieee80211_beacon_update() on iv_update_beacon() calls. This is required
that certain bits, e.g. TIM, get updated. A call to ieee80211_beacon_alloc()
is not enough because it does not care about flags which can only change
during runtime. By design a beacon is supposed to be allocated only once
while moving into RUN state.
To handle all possible calls to iv_update_beacon() the run_updateslot()
function has been revived and run_updateprot() has been added.
run_updateslot() handles slot time changes and run_updateprot() changes
to protection, both can change while nodes associate/leave.
Submitted by: Alexander Zagrebin <alex at zagrebin.ru>,
PseudoCylon <moonlightakkiy atyahoo.ca>
MFC after: 3 weeks
There's still a lot of random issues to sort out with the radio side of
things and AMPDU RX handling (and completely missing AMPDU TX handling!)
but if people wish to give this a go and assist in debugging the
issues, they can define ATH_DO_11N to enable it.
I'm just re-iterating - this is here to allow people to assist in
further 11n development; it is not any indication that the 11n support
is complete and functional.
Important notes:
* This doesn't support 1-stream cards yet - (eg AR9285) - the various bits
that negotiate TX/RX MCS don't know not to try >1 stream TX or negotiate
1-stream RX; so don't enable 11n unless you've first taught the rate
control module and the net80211 stack to negotiate 1-stream stuff;
* The only rate control module minimally 11n aware is ath_rate_sample;
* ath_rate_sample doesn't know about HT/40; so airtime will be incorrectly
calculated;
* The AR9160 and AR9280 radio code is unreliable at the higher MCS rates for
some reason; this will definitely impact 11n performance;
* AMPDU-TX isn't yet implemented;
* AMPDU-RX may be a bit buggy still and will definitely suffer from the
radio unreliability mentioned above (ie, don't expect 150/300mbit
RX just yet.)
SU+J is not included as a FEATURE macro:
- it was not in the tree during the GSoC
- I do not see an option to en-/disable it in NOTES
Two minor changes where made during the review compared to what was developed
during GSoC 2010.
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: kib
X-MFC after: to be determined in last commit with code from this project
The correct bit to set is 0x1 in the high MAC address byte, not 0x80.
The hardware isn't programmed with that bit (which is the multicast
adress bit.)
The linux ath9k keycache code uses that bit in the MAC as a "this is
a multicast key!" and doesn't set the AR_KEYTABLE_VALID bit.
This tells the hardware the MAC isn't to be used for unicast destination
matching but it can be used for multicast bssid traffic.
This fixes some encryption problems in station mode.
PR: kern/154598
- use device_printf() instead of printf() to give more accurate warnings.
- use memcpy() instead of bcopy().
- add missing #if's for non-FreeBSD compilation.
Approved by: thompsa (mentor)
error address on a decoding error to unlatch it and to allow
us to print a better diagnostics message. This also has the
side effect of clearing the condition, which prevents an
interrupt storm.
Revert back to the previous method of doing it for where a node can be
identified and it's an 11n node.
I'll have to do some further research into exactly what is being messed up
with the sequence number matching and I'll then revisit this.
This doesn't yet take into account HT40 packet durations as the node info
(needed to know if it's a HT20 or HT40 node) isn't available everywhere
it needs to be.
free i-nodes or blocks to handle a race where another thread might have
allocated the last i-node or block while we were waiting for the buffer.
Tested by: dougb
putting descriptors (not buffers) across a 4k page boundary can cause issues.
I've not seen it in production myself but it apparently can cause problems.
So, in preparation for addressing this workaround, (re)-expose the particular
HAL capability bit which marks whether the chipset has support for cross-4k-
boundary transactions or not.
A subsequent commit will modify the descriptor allocation to avoid allocating
descriptor entries that straddle a 4k page boundary.
a hard hang due to an interrupt storm or stuck interrupt pin. We
return the next IRQ that is larger than the last one returned and
in doing so give all interrupts a fair chance of being handled.
Consequently, we're able to break into the kernel debugger in such
an event.
masked-off by the firmware.
o In DELAY(). Make sure we have an inner-loop body that the compiler
cannot eliminate. While timing does not have to be perfect, the
loops must be there to have at least some notion of delay.
Obtained from: Juniper Networks
misnamed since it was introduced and should not be globally exposed
with this name. The equivalent functionality is now available using
kern_yield(curthread->td_user_pri). The function remains
undocumented.
Bump __FreeBSD_version.
- entirely eliminate some calls to uio_yeild() as being unnecessary,
such as in a sysctl handler.
- move should_yield() and maybe_yield() to kern_synch.c and move the
prototypes from sys/uio.h to sys/proc.h
- add a slightly more generic kern_yield() that can replace the
functionality of uio_yield().
- replace source uses of uio_yield() with the functional equivalent,
or in some cases do not change the thread priority when switching.
- fix a logic inversion bug in vlrureclaim(), pointed out by bde@.
- instead of using the per-cpu last switched ticks, use a per thread
variable for should_yield(). With PREEMPTION, the only reasonable
use of this is to determine if a lock has been held a long time and
relinquish it. Without PREEMPTION, this is essentially the same as
the per-cpu variable.
