- use 1ULL to avoid shift truncations
- recompute the sum of weight dynamically to provide better fairness
- fix an erroneous constant in the computation of the slot
- preserve timestamp correctness when the old timestamp is stale.
We don't use the direction of the fragments for anything. The frc_direction
field is assigned, but never read.
Just remove it.
Differential Revision: https://reviews.freebsd.org/D2773
Approved by: philip (mentor)
When we try to look up a pf_fragment with pf_find_fragment() we compare (see
pf_frag_compare()) addresses (and family), id but also protocol. We failed to
save the protocol to the pf_fragment in pf_fragcache(), resulting in failing
reassembly.
Differential Revision: https://reviews.freebsd.org/D2772
Fix a panic when handling fragmented ip4 packets with 'drop-ovl' set.
In that scenario we take a different branch in pf_normalize_ip(), taking us to
pf_fragcache() (rather than pf_reassemble()). In pf_fragcache() we create a
pf_fragment, but do not set the address family. This leads to a panic when we
try to insert that into pf_frag_tree because pf_addr_cmp(), which is used to
compare the pf_fragments doesn't know what to do if the address family is not
set.
Simply ensure that the address family is set correctly (always AF_INET in this
path).
PR: 200330
Differential Revision: https://reviews.freebsd.org/D2769
Approved by: philip (mentor), gnn (mentor)
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
even if there was non-zero number of restarts, we would unref/clear
all value references and start ipfw_link_table_values() once again
with (mostly) cleared "tei" buffer.
Additionally, ptei->ptv stores only to-be-added values, not existing ones.
This is a forgotten piece of previous value refconting implementation,
and now it is simply incorrect.
Currently we have tables identified by their names in userland
with internal kernel-assigned indices. This works the following way:
When userland wishes to communicate with kernel to add or change rule(s),
it makes indexed sorted array of table names
(internally ipfw_obj_ntlv entries), and refer to indices in that
array in rule manipulation.
Prior to committing new rule to the ruleset kernel
a) finds all referenced tables, bump their refcounts and change
values inside the opcodes to be real kernel indices
b) auto-creates all referenced but not existing tables and then
do a) for them.
Kernel does almost the same when exporting rules to userland:
prepares array of used tables in all rules in range, and
prepends it before the actual ruleset retaining actual in-kernel
indexes for that.
There is also special translation layer for legacy clients which is
able to provide 'real' indices for table names (basically doing atoi()).
While it is arguable that every subsystem really needs names instead of
numbers, there are several things that should be noted:
1) every non-singleton subsystem needs to store its runtime state
somewhere inside ipfw chain (and be able to get it fast)
2) we can't assume object numbers provided by humans will be dense.
Existing nat implementation (O(n) access and LIST inside chain) is a
good example.
Hence the following:
* Convert table-centric rewrite code to be more generic, callback-based
* Move most of the code from ip_fw_table.c to ip_fw_sockopt.c
* Provide abstract API to permit subsystems convert their objects
between userland string identifier and in-kernel index.
(See struct opcode_obj_rewrite) for more details
* Create another per-chain index (in next commit) shared among all subsystems
* Convert current NAT44 implementation to use new API, O(1) lookups,
shared index and names instead of numbers (in next commit).
Sponsored by: Yandex LLC
discontinued by its initial authors. In FreeBSD the code was already
slightly edited during the pf(4) SMP project. It is about to be edited
more in the projects/ifnet. Moving out of contrib also allows to remove
several hacks to the make glue.
Reviewed by: net@
If the direction is not PF_OUT we can never be forwarding. Some input packets
have rcvif != ifp (looped back packets), which lead us to ip6_forward() inbound
packets, causing panics.
Equally, we need to ensure that packets were really received and not locally
generated before trying to ip6_forward() them.
Differential Revision: https://reviews.freebsd.org/D2286
Approved by: gnn(mentor)
set past this point in the code. The packet should be dropped and
not massaged as it is here.
Differential Revision: https://reviews.freebsd.org/D2266
Submitted by: eri
Sponsored by: Rubicon Communications (Netgate)
In cases where we scrub (fragment reassemble) on both input and output
we risk ending up in infinite loops when forwarding packets.
Fragmented packets come in and get collected until we can defragment. At
that point the defragmented packet is handed back to the ip stack (at
the pfil point in ip6_input(). Normal processing continues.
Eventually we figure out that the packet has to be forwarded and we end
up at the pfil hook in ip6_forward(). After doing the inspection on the
defragmented packet we see that the packet has been defragmented and
because we're forwarding we have to refragment it.
In pf_refragment6() we split the packet up again and then ip6_forward()
the individual fragments. Those fragments hit the pfil hook on the way
out, so they're collected until we can reconstruct the full packet, at
which point we're right back where we left off and things continue until
we run out of stack.
Break that loop by marking the fragments generated by pf_refragment6()
as M_SKIP_FIREWALL. There's no point in processing those packets in the
firewall anyway. We've already filtered on the full packet.
Differential Revision: https://reviews.freebsd.org/D2197
Reviewed by: glebius, gnn
Approved by: gnn (mentor)
where we want to create a new IP datagram.
o Add support for RFC6864, which allows to set IP ID for atomic IP
datagrams to any value, to improve performance. The behaviour is
controlled by net.inet.ip.rfc6864 sysctl knob, which is enabled by
default.
o In case if we generate IP ID, use counter(9) to improve performance.
o Gather all code related to IP ID into ip_id.c.
Differential Revision: https://reviews.freebsd.org/D2177
Reviewed by: adrian, cy, rpaulo
Tested by: Emeric POUPON <emeric.poupon stormshield.eu>
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Relnotes: yes
On Ethernet packets have a minimal length, so very short packets get padding
appended to them. This padding is not stripped off in ip6_input() (due to
support for IPv6 Jumbograms, RFC2675).
That means PF needs to be careful when reassembling fragmented packets to not
include the padding in the reassembled packet.
While here also remove the 'Magic from ip_input.' bits. Splitting up and
re-joining an mbuf chain here doesn't make any sense.
Differential Revision: https://reviews.freebsd.org/D2189
Approved by: gnn (mentor)
When forwarding fragmented IPv6 packets and filtering with PF we
reassemble and refragment. That means we generate new fragment headers
and a new fragment ID.
We already save the fragment IDs so we can do the reassembly so it's
straightforward to apply the incoming fragment ID on the refragmented
packets.
Differential Revision: https://reviews.freebsd.org/D2188
Approved by: gnn (mentor)
to obtain IPv4 next hop address in tablearg case.
Add `fwd tablearg' support for IPv6. ipfw(8) uses INADDR_ANY as next hop
address in O_FORWARD_IP opcode for specifying tablearg case. For IPv6 we
still use this opcode, but when packet identified as IPv6 packet, we
obtain next hop address from dedicated field nh6 in struct table_value.
Replace hopstore field in struct ip_fw_args with anonymous union and add
hopstore6 field. Use this field to copy tablearg value for IPv6.
Replace spare1 field in struct table_value with zoneid. Use it to keep
scope zone id for link-local IPv6 addresses. Since spare1 was used
internally, replace spare0 array with two variables spare0 and spare1.
Use getaddrinfo(3)/getnameinfo(3) functions for parsing and formatting
IPv6 addresses in table_value. Use zoneid field in struct table_value
to store sin6_scope_id value.
Since the kernel still uses embedded scope zone id to represent
link-local addresses, convert next_hop6 address into this form before
return from pfil processing. This also fixes in6_localip() check
for link-local addresses.
Differential Revision: https://reviews.freebsd.org/D2015
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
size as they arrived in. This allows the sender to determine the optimal
fragment size by Path MTU Discovery.
Roughly based on the OpenBSD work by Alexander Bluhm.
Submitted by: Kristof Provost
Differential Revision: D1767
That partially fixes IPv6 fragment handling. Thanks to Kristof for
working on that.
Submitted by: Kristof Provost
Tested by: peter
Differential Revision: D1765
very questionable, since it makes vimages more dependent on each other. But
the reason for the backout is that it screwed up shutting down the pf purge
threads, and now kernel immedially panics on pf module unload. Although module
unloading isn't an advertised feature of pf, it is very important for
development process.
I'd like to not backout r276746, since in general it is good. But since it
has introduced numerous build breakages, that later were addressed in
r276841, r276756, r276747, I need to back it out as well. Better replay it
in clean fashion from scratch.
