None of lstat(2), fstat(2), fstatat(2) were tracked either.
The other filemon implementations also do not track stat(2), nor
does bmake utilize it. The act of opening a file for read should
be enough to decide that a file is a dependency. There could be
rare cases where just having a file would cause a dependency but it
is unlikely.
MFC after: 2 weeks
Also noted by: sjg
Sponsored by: EMC / Isilon Storage Division
- proc.p_filemon is added which is protected by PROC_LOCK. This improves
performance and avoids double-fork issues, taking allproc_lock
while in syscalls, and walking the process tree in syscalls. A
particular proc.p_filemon can only be changed to NULL or another
filemon, or the filemon inherited, while the filemon->lock is held.
- Filemon are reference counted. On the last reference the log will be closed.
- When closing the devfs file handle, the filemon will be detached from all
processes and inheritance prevented.
- Disallow attaching to a process already being traced since filemon is
typically intended to be used on children only. This is allowed for
curproc as bmake relies on this behavior for rare cases when combining
.MAKE with .META.
- Detach any previously tracked process on ioctl(FILEMON_SET_PID).
- Handle error from devfs_set_cdevpriv() in filemon_open().
- The global filemon lock and lists are removed.
- A free list is no longer kept. Previously this list was
forever-expanding and never garbage cleaned.
- No longer loses track of double-forks. If the process holding the filemon
handle closes it will close the log rather than wait on a daemonized process,
but it will log all activity until it closes its handle. The filemon
will be removed from the process and not inherited.
- A separate process count is kept only as an optimization for
forced detachment to avoid taking allproc_lock and walking the entire
process tree.
- struct filemon access is protected by sx(9) filemon->lock as it was before.
- Add more comments and KASSERTS.
MFC after: 2 weeks
Reviewed by: kib, mjg, markj (all on previous versions)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5520
Submitted by: Ju Sun <junsu microsoft com>
Reviewed by: Dexuan Cui <decui microsoft com>, sephe
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5651
This write came from Linux commit b4ae3f22d238 which has been implicated
in Sandy Bridge power consumption issues (albeit under different
conditions on Linux). Disabling it restores normal power consumption on
my Sandy Bridge laptop (Thinkpad X220).
PR: 207889
Reviewed by: cem, dumbbell
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5665
a DRIVER_MODULE() referencing mmc_driver has a MODULE_DEPEND() on mmc. This
is because the kernel linker only searches for symbols in dependent modules,
so loading sdhci_pci (and other bus-flavors of sdhci) would fail when mmc
was not compiled into the kernel (even if you hand-loaded mmc first).
(Thanks to jilles@ for providing the vital clue about the kernel linker.)
ahci.c had one signed long, which was passed into rman, rather than u_long.
After the switch of rman_res_t from size u_long to size uintmax_t, the sign
extension caused ranges to get messed up, and ahcich* to not attach.
There may be more signed longs used in this way, which will be fixed as they're
reported.
Reported by: pho
There's some upcoming work to add new chipset support here and I'd
like to only add 802.11n support to one driver, instead of both
urtwn and rtwn.
There's also missing support for things like 802.11n, some powersave
work, bluetooth integration/coexistence, etc, and also newer parts
(like 8192EU, maybe some 11ac parts, not sure yet.)
So, this is hopefully the first step in a longer set of steps to unify
rtwn/urtwn and extend it with more interesting chipset and functionality
support.
Reviewed by: kevlo
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
Figure out if the chip is counting PAUSE frames in the "normal" stats
and take them out if it is. This fixes a bug in the tx stats because
the default hardware behavior is different for Tx and Rx but the driver
was treating both the same way. The result was that OPACKETS, OBYTES,
and OMCASTS were under-reported (if tx_pause > 0) before this change.
Note that the mac_stats sysctl still gives you the raw value of these
statistics straight from the device registers.
Prevent ixgbe outputting "Invalid advertised speed" warning on boot with
no customisations by moving test from sysctl handler to set handler.
PR: 208022
MFC after: 3 days
Sponsored by: Multiplay
support frameworks (i.e. clk/regulators/tsensors/fuses...).
It provides simple unified consumers interface for manipulations with
phy (USB/SATA/PCIe) resources.
support frameworks(i.e. clk/reset/phy/tsensors/fuses...).
The framework is still far from perfect and probably doesn't have stable
interface yet, but we want to start testing it on more real boards and
different architectures.
This makes sure the default context of each ring is cleaned up with the
ring itself and fixes a memory leak.
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Fri May 3 16:29:08 2013 +0300
drm/i915: unreference default context on module unload
Before module unload is called, gpu_idle() will switch
to default context. This will increment ref count of base
object as the default context is 'running' on module unload
time. Unreference the drm object so that when context
is freed, base object is freed as well.
v2: added comment to explain the refcounts (Ben Widawsky)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Obtained from: Linux
defined:
sys/dev/cxgbe/t4_main.c:7474: warning: 'sysctl_tp_tick' defined but not used
sys/dev/cxgbe/t4_main.c:7505: warning: 'sysctl_tp_dack_timer' defined but not used
sys/dev/cxgbe/t4_main.c:7519: warning: 'sysctl_tp_timer' defined but not used
This just adds a bunch of #ifdef TCP_OFFLOAD in the right places.
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D5620
This fixes several memory leaks. Apparently, this problem exists in
Linux 3.8 but the code changed in Linux 3.9 so it may be fixed upstream
already. Still, this is something we need to pay attention to.
... when __wait_seqno() is interrupted by a signal. In this case,
__wait_seqno() returns -ERESTARTSYS. Like we already do in drm_ioctl(),
we need to convert this error to a common code such as -EINTR, so the
page fault handler is restarted.
Reported by: Frederic Chardon <chardon.frederic@gmail.com>
Tested by: Frederic Chardon <chardon.frederic@gmail.com>
The i915 video driver doesn't depend on agp(4) anymore for Sandybridge
and later GPUs. Therefore, there is no need to attach agp(4) to those
devices.
While here, fix `agp_i965_res_spec` to include the aperture base for
GEN4 and GEN5.
Reviewed by: kib
Approved by: kib
Differential Revision: https://reviews.freebsd.org/D5586
This fixes the following error:
kernel: error: [drm:pid1167:drm_release] *ERROR* Device busy: 2
Because of that, drm_lastclose() was not called, leading to a few memory
leaks once the driver was unloaded.
MFC after: 1 week
