It does not work with ng_ubt(4) and require special driver and firmware.
Obtained from: Marcel Holtmann < marcel at holtmann dot org >
Submitted by: Rainer Goellner < rainer at jabbe dot de >
MFC after: 3 days
there are at least two versions of the adapter. Version 1 (product ID 0x2200)
of the adapter does not work with ng_ubt(4) and require special driver and
firmware. Version 2 (product ID 0x3800) seems to work just fine, except it
does not have bDeviceClass, bDeviceSubClass and bDeviceProtocol set to required
(by specification) values. This change forces ng_ubt(4) to attach to the
version 2 adapter.
Obtained from: Marcel Holtmann <marcel at holtmann dot org>
Submitted by: Rainer Goellner <rainer at jabbe dot de>
Provide a backwards compatible way to have the extra macro by defining
PCCARD_API_LEVEL 5 before including pccarddevs for driver writers that
want/need to have the same driver on 5 and 6 with pccard attachments.
Approved by: re (dwhite)
protocol. RFCOMM is a SOCK_STREAM protocol not SOCK_SEQPACKET. This was a
serious bug caused by cut-and-paste. I'm surprised it did not bite me before.
Dunce hat goes to me.
MFC after: 3 days
EA bit is set in hdr->length (16-bit length). This currently has no effect
on the rest of the code. It just fixes the debug message.
MFC After: 3 weeks
a socket from a regular socket to a listening socket able to accept new
connections. As part of this state transition, solisten() calls into the
protocol to update protocol-layer state. There were several bugs in this
implementation that could result in a race wherein a TCP SYN received
in the interval between the protocol state transition and the shortly
following socket layer transition would result in a panic in the TCP code,
as the socket would be in the TCPS_LISTEN state, but the socket would not
have the SO_ACCEPTCONN flag set.
This change does the following:
- Pushes the socket state transition from the socket layer solisten() to
to socket "library" routines called from the protocol. This permits
the socket routines to be called while holding the protocol mutexes,
preventing a race exposing the incomplete socket state transition to TCP
after the TCP state transition has completed. The check for a socket
layer state transition is performed by solisten_proto_check(), and the
actual transition is performed by solisten_proto().
- Holds the socket lock for the duration of the socket state test and set,
and over the protocol layer state transition, which is now possible as
the socket lock is acquired by the protocol layer, rather than vice
versa. This prevents additional state related races in the socket
layer.
This permits the dual transition of socket layer and protocol layer state
to occur while holding locks for both layers, making the two changes
atomic with respect to one another. Similar changes are likely require
elsewhere in the socket/protocol code.
Reported by: Peter Holm <peter@holm.cc>
Review and fixes from: emax, Antoine Brodin <antoine.brodin@laposte.net>
Philosophical head nod: gnn
This is just a workaround for a know problem with Motorola E1000
phone. Something is wrong with the configuration of L2CAP/RFCOMM
channel. Even though we set L2CAP MTU to 132 bytes (default RFCOMM
MTU 127 + 5 bytes RFCOMM frame header) and the phone accepts it,
the phone still sends oversized L2CAP packets. It appears that the
phone wants to use bigger (667 bytes) RFCOMM frames, but it does
not segment them according to the configured L2CAP MTU. The 667
bytes RFCOMM frame size corresponds to the default L2CAP MTU of
672 bytes (667 + 5 bytes RFCOMM frame header).
This problem only appears if connection was initiated from the
phone. I'm not sure who is at fault here, so for now just put
workaround in place. Quick look at the spec did not reveal any
anwser.
Tested by: Jes < jjess at freebsd dot polarhome dot com >
MFC after: 3 days
call net_add_domain(). Calling this function too early (or late) breaks
assertations about the global domains list.
Actually it should be forbidden to call net_add_domain() outside of
SI_SUB_PROTO_DOMAIN completely as there are many places where we traverse
the domains list unprotected, but for now we allow late calls (mostly to
support netgraph). In order to really fix this we have to lock the domains
list in all places or find another way to ensure that we can safely walk the
list while another thread might be adding a new domain.
Spotted by: se
Reviewed by: julian, glebius
PR: kern/73321 (partly)
field created for line disciplne drivers private use. Also add NET_NEEDS_GIANT
warning. For whatever reason ng_tty(4) was fixed but ng_h4(4) was not :(
(sorele()/sotryfree()):
- This permits the caller to acquire the accept mutex before the socket
mutex, avoiding sofree() having to drop the socket mutex and re-order,
which could lead to races permitting more than one thread to enter
sofree() after a socket is ready to be free'd.
- This also covers clearing of the so_pcb weak socket reference from
the protocol to the socket, preventing races in clearing and
evaluation of the reference such that sofree() might be called more
than once on the same socket.
This appears to close a race I was able to easily trigger by repeatedly
opening and resetting TCP connections to a host, in which the
tcp_close() code called as a result of the RST raced with the close()
of the accepted socket in the user process resulting in simultaneous
attempts to de-allocate the same socket. The new locking increases
the overhead for operations that may potentially free the socket, so we
will want to revise the synchronization strategy here as we normalize
the reference counting model for sockets. The use of the accept mutex
in freeing of sockets that are not listen sockets is primarily
motivated by the potential need to remove the socket from the
incomplete connection queue on its parent (listen) socket, so cleaning
up the reference model here may allow us to substantially weaken the
synchronization requirements.
RELENG_5_3 candidate.
MFC after: 3 days
Reviewed by: dwhite
Discussed with: gnn, dwhite, green
Reported by: Marc UBM Bocklet <ubm at u-boot-man dot de>
Reported by: Vlad <marchenko at gmail dot com>
The original idea was to use it for firmware upgrading and similar
operations. In real life almost all Bluetooth USB devices do not
need firmware download. If device does require firmware download
then ugen(4) (or specialized driver like ubtbcmfw(8)) should be
used instead.
MFC after: 3 days
requires a recompile of netgraph users.
Also change the size of a field in the bluetooth code
that was waiting for the next change that needed recompiles so
it could piggyback its way in.
Submitted by: jdp, maksim
MFC after: 2 days
we have to revert to TTYDISC which we know will successfully open
rather than try the previous ldisc which might also fail to open.
Do not let ldisc implementations muck about with ->t_line, and remove
code which checks for reopens, it should never happen.
Move ldisc->l_hotchar to tty->t_hotchar and have ldisc implementation
initialize it in their open routines. Reset to zero when we enter
TTYDISC. ("no" should really be -1 since zero could be a valid
hotchar for certain old european mainframe protocols.)
- Lock down low hanging fruit use of sb_flags with socket buffer
lock.
- Lock down low hanging fruit use of so_state with socket lock.
- Lock down low hanging fruit use of so_options.
- Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with
socket buffer lock.
- Annotate situations in which we unlock the socket lock and then
grab the receive socket buffer lock, which are currently actually
the same lock. Depending on how we want to play our cards, we
may want to coallesce these lock uses to reduce overhead.
- Convert a if()->panic() into a KASSERT relating to so_state in
soaccept().
- Remove a number of splnet()/splx() references.
More complex merging of socket and socket buffer locking to
follow.
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
flags relating to several aspects of socket functionality. This change
breaks out several bits relating to send and receive operation into a
new per-socket buffer field, sb_state, in order to facilitate locking.
This is required because, in order to provide more granular locking of
sockets, different state fields have different locking properties. The
following fields are moved to sb_state:
SS_CANTRCVMORE (so_state)
SS_CANTSENDMORE (so_state)
SS_RCVATMARK (so_state)
Rename respectively to:
SBS_CANTRCVMORE (so_rcv.sb_state)
SBS_CANTSENDMORE (so_snd.sb_state)
SBS_RCVATMARK (so_rcv.sb_state)
This facilitates locking by isolating fields to be located with other
identically locked fields, and permits greater granularity in socket
locking by avoiding storing fields with different locking semantics in
the same short (avoiding locking conflicts). In the future, we may
wish to coallesce sb_state and sb_flags; for the time being I leave
them separate and there is no additional memory overhead due to the
packing/alignment of shorts in the socket buffer structure.
reference count:
- Assert SOCK_LOCK(so) macros that directly manipulate so_count:
soref(), sorele().
- Assert SOCK_LOCK(so) in macros/functions that rely on the state of
so_count: sofree(), sotryfree().
- Acquire SOCK_LOCK(so) before calling these functions or macros in
various contexts in the stack, both at the socket and protocol
layers.
- In some cases, perform soisdisconnected() before sotryfree(), as
this could result in frobbing of a non-present socket if
sotryfree() actually frees the socket.
- Note that sofree()/sotryfree() will release the socket lock even if
they don't free the socket.
Submitted by: sam
Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS
global mutex, accept_mtx, which serializes access to the following
fields across all sockets:
so_qlen so_incqlen so_qstate
so_comp so_incomp so_list
so_head
While providing only coarse granularity, this approach avoids lock
order issues between sockets by avoiding ownership of the fields
by a specific socket and its per-socket mutexes.
While here, rewrite soclose(), sofree(), soaccept(), and
sonewconn() to add assertions, close additional races and address
lock order concerns. In particular:
- Reorganize the optimistic concurrency behavior in accept1() to
always allocate a file descriptor with falloc() so that if we do
find a socket, we don't have to encounter the "Oh, there wasn't
a socket" race that can occur if falloc() sleeps in the current
code, which broke inbound accept() ordering, not to mention
requiring backing out socket state changes in a way that raced
with the protocol level. We may want to add a lockless read of
the queue state if polling of empty queues proves to be important
to optimize.
- In accept1(), soref() the socket while holding the accept lock
so that the socket cannot be free'd in a race with the protocol
layer. Likewise in netgraph equivilents of the accept1() code.
- In sonewconn(), loop waiting for the queue to be small enough to
insert our new socket once we've committed to inserting it, or
races can occur that cause the incomplete socket queue to
overfill. In the previously implementation, it was sufficient
to simply tested once since calling soabort() didn't release
synchronization permitting another thread to insert a socket as
we discard a previous one.
- In soclose()/sofree()/et al, it is the responsibility of the
caller to remove a socket from the incomplete connection queue
before calling soabort(), which prevents soabort() from having
to walk into the accept socket to release the socket from its
queue, and avoids races when releasing the accept mutex to enter
soabort(), permitting soabort() to avoid lock ordering issues
with the caller.
- Generally cluster accept queue related operations together
throughout these functions in order to facilitate locking.
Annotate new locking in socketvar.h.
the socket is on an accept queue of a listen socket. This change
renames the flags to SQ_COMP and SQ_INCOMP, and moves them to a new
state field on the socket, so_qstate, as the locking for these flags
is substantially different for the locking on the remainder of the
flags in so_state.
state. Apparently it happens when both devices try to disconnect RFCOMM
multiplexor channel at the same time.
The scenario is as follows:
- local device initiates RFCOMM connection to the remote device. This
creates both RFCOMM multiplexor channel and data channel;
- remote device terminates RFCOMM data channel (inactivity timeout);
- local device acknowledges RFCOMM data channel termination. Because
there is no more active data channels and local device has initiated
connection it terminates RFCOMM multiplexor channel;
- remote device does not acknowledges RFCOMM multiplexor channel
termination. Instead it sends its own request to terminate RFCOMM
multiplexor channel. Even though local device acknowledges RFCOMM
multiplexor channel termination the remote device still keeps
L2CAP connection open.
Because of hanging RFCOMM multiplexor channel subsequent RFCOMM
connections between local and remote devices will fail.
Reported by: Johann Hugo <jhugo@icomtek.csir.co.za>
functions in kern_socket.c.
Rename the "canwait" field to "mflags" and pass M_WAITOK and M_NOWAIT
in from the caller context rather than "1" or "0".
Correct mflags pass into mac_init_socket() from previous commit to not
include M_ZERO.
Submitted by: sam
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
Free approx 86 major numbers with a mostly automatically generated patch.
A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
problem here still to be solved: the sockaddr_hci has still a 16 byte
field for the node name. The code currently does not correctly use the
length field in the sockaddr to handle the address length, so
node names get truncated to 15 characters when put into a sockaddr_hci.
