cur_console is NULL when copy_font() is first called from scinit(). This
is apparently harmless when scinit() is called early from sccninit() -
page 0 is apparently mapped r/w then, and 0->status contains suitable
garbage. However, when there is a serial console, scinit() is first
called from scattach() when the page tables are completely initialized,
so the NULL pointer causes a panic.
Submitted by: bruce
called early for console i/o. The timer is usually in BIOS mode
if it isn't explicitly initialized. Then it counts twice as fast
and has a max count of 65535 instead of 11932. The larger count
tended to cause infinite loops for delays of > 20 us. Such delays
are rare. For syscons and kbdio, DELAY() is only called early
enough to matter for ddb input after booting with -d, and the delay
is too small to matter (and too small to be correct) except in the
PC98 case. For pcvt, DELAY() is not used for small delays (pcvt
uses its own broken routine instead of the standard broken one),
but some versions call DELAY() with a large arg when they unnecessarily
initialize the keyboard for doing console output. The problem is
more serious for pcvt because there is always some early console
output.
Guard against the i8254 timer being partially or incorrectly
initialized. This would have prevented the endless loop.
Should be in 2.2.
on it.
makesyscalls.sh:
This parsed $Id$. Fixed(?) to parse $FreeBSD$. The output is wrong when
the id is not expanded in the source file.
syscalls.master:
Fixed declaration of sigsuspend(). There are still some bogons and
spam involving sigset_t.
Use `struct foo *' instead of the equivalent `foo_t *' for some nfs and
lfs syscalls so that <sys/sysproto.h> doesn't depend on <sys/mount.h>.
variable `kern.maxvnodes' which gives much better control over vnode
allocation than EXTRAVNODES (except in -current between 1995/10/28 and
1996/11/12, kern.maxvnodes was read-only and thus useless).
I have no idea if this works since I don't have one of the cards to test.
I also don't know what the LINT and GENERIC entries should look like,
so I just made up some values for now and left them commented out.
Someone who knows the factory settings for a Pro/10, please contact me!
Submitted-By: Javier Martín Rueda <jmrueda@diatel.upm.es>
when allocating memory for network buffers at interrupt time. This is due
to inadequate checking for the new mcl_map. Fixed by merging mb_map and
mcl_map into a single mb_map.
Reviewed by: wollman
rev.1.10 two years ago. Children continued to run at splhigh()
after returning from vm_fork(). This mainly affected kernel
processes and init. For ordinary processes, interrupts are normally
unmasked a few instructions later after fork() returns (it may be
important for syscall() not to reschedule the child processes).
Kernel processes had workarounds for the problem. Init manages to
start because some routines "know" that it is safe to go to sleep
despite their caller starting them at a high ipl. Then its ipl
gets fixed on its first normal return from a syscall.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
previous hackery involving struct in_ifaddr and arpcom. Get rid of the
abominable multi_kludge. Update all network interfaces to use the
new machanism. Distressingly few Ethernet drivers program the multicast
filter properly (assuming the hardware has one, which it usually does).
compile again. The code to protect users from combining the dedicated
PCCARD drivers and the generic code is a warning if the above option
is included in the config file.
Demanded by: bde
(helptext from Philippe Regnauld)
- Make introfunc() work with serial terminals.
(submitted by Jean-Marc Zucconi)
- Eliminate excessive statusline redraw during screen updates.
(requested by Peter Wemm)
- Some trivial output formatting dinks.
Assuming that the intr_mask[] was updated by changing the maskptrs (the
existing update_intr_masks() function will not work) this code was
written so the PCIC controller insertion/removal events will not
interrupt the card IRQ handler events.
Some possible scenarios:
+ Card is removed during IRQ handler:
- PCIC card handler is allowed to interrupt
- card removal event is called, removing the driver and data structures
* card interrupt handler continues w/out driver, data structures, and hardware
OR (the code just committed)
* card IRQ handler has no hardware to read/write to, but has code and
data to run on (XXX- Assume it completes and doesn't spin forever)
- PCIC card handler unloads the card driver
The current situation at least leaves the card interrupt handlers the
drivers and data structures to work with although the hardware can't be
guaranteed.
Reviewed by: bde
- Turn off BTB (Branch Target Buffer) because the BTB makes system
unstable on some machines. The BTB feature can be enabled if
"options BTB_EN" is added in kernel a configuration file.
- Change comment.
- Reorder `orb XX,%al's.
- Reset NMI F/F (mask NMI) before setting registers, and set it after
setting them. Normally, this change has no effect.
multicast group memberships. This is not actually operative
at the moment (a lot of other code still needs to be changed), but
this seemed like a useful reference point to check in so that
others (i.e. Bill Fenner) have fair warning of where we are going.
> <sys/param.h> doesn't include <sys/time.h>
>
> I removed the NAPM check since it's wasteful to check twice. apmprobe()
> checks the unit number, and that's the right check.
Submitted by: bde
swapgeneric.c hasn't had anything to do with swapping for some time.
It just makes the -a boot option actually work, and breaks the static
configuration of rootdev and dumpdev. It should be reorganized to
only support -a.
etc..), plus add a better display suspend function.
- Changed the Copyright's to reflect the new 'jp.FreeBSD.org' email
address.
Submitted by: nate & HOSOKAWA, Tatsumi <hosokawa@jp.FreeBSD.org>
NCR driver dies when "xmcd" accesses the CD-ROM drive
Restrict cacheing of INQUIRY results to LUN 0.
Thanks to Dave Huang <khym@bga.com> for reporting the problem
and suggesting a fix, though I chose a slightly different one.
- the operands for bt, bts, arpl and `enter' were reversed.
- btr was reported as bts (with the correct operand order).
- cmpxchg was misplaced. It was misplaced differently in the
comments. It is misplaced differently again in the i486 manual.
I put it where the i586 manual and gas say it is.
- fucompp was misplaced.
- the rr table for(s) some versions of fstp, fcom and fcomp was non-null.
This caused some invalid opcodes to be reported as "" instead of as
"<bad instruction>".
- the word and long versions of the fi* instructions were reversed.
- aaa and daa were reversed.
Fixed bugs involving unusual operand sizes:
- 32-bit registers weren't always forced for bswap or for moves to and
from special registers.
- the operand sizes weren't reported for [l]call or [l]jmp.
- displacements weren't truncated mod 2^16 when the operand size was
16-bit.
- too-large displacements and offsets were fetched, and too-large
offsets were reported, when the operand size was 16-bit.
- sign extended immediate bytes were extended too far when the operand
size was 16-bit.
Fixed bugs involving usual operand sizes:
- 8-bit source registers weren't forced for mov[sz]b[wl].
- 16-bit source registers weren't forced for mov[sz]w[wl].
- immediate bytes were sometimes reported as sign extended even for
byte operations. Same for immediate words in word operations.
- the immediate byte was not reported as sign extended for `push'.
Finished Pentium support:
- cpuid, cmpxchg8b and rsm were missing.
Finished i287 support:
- fneni, fndisi and fsetpm were missing. These are harmless nops on
later FPUs.
Improvements:
- report invalid opcodes 0xd6 and 0xf1 using .byte. They are special
in not causing invalid operand exceptions when executed.
- report the immediate byte for unusual aam and aad instuctions.
Immediate bytes other than 0x0a always worked and are documented to
work on Pentiums.
wdparams from short into u_short. If wdp_cylinders is short, it
overflows and cause serious sign extension bug when large IDE HDD is
used. These members are only used for initialization of u_long
variables in both 3.0-current and RELENG_2_2 branch.
I believe this should be in 2.2.
Reviewed by: Bruce Evans <bde@zeta.org.au>
address+0x1000) into 0xdc000 (BIOS ROM base address).
(2) Add sample line for Logitec LHA-20x SCSI card.
(3) Change I/O port address of ed8 (C-NET(98) card) from 0x00d0 into
0x03d0 (vendor default).
Submitted by: Michio "Karl" Jibo <karl@marcer.nagaokaut.ac.jp>
This code was sent to me by Bruce Evans, and seems to fix some
possible kernel panic in case of an execution error. It did not
cause any problems on my system, but I did never observe the
problem this patch is supposed to fix, anyway.
This patch is a NOP, unless the kernel is built with "options
USER_LDT", and doesn't affect the GENERIC kernel for this reason.
I want to have it in 2.2: it fixes a bug ...
Submitted by: bde
anymore with the "full" collapse fix that we added about 1yr ago!!! The
code has been removed by optioning it out for now, so we can put it back
in ASAP if any problems are found.
and objects. Previously, "fancy" memory management techniques
such as that used by the M3 RTS would have the tendancy of chopping
up processes allocated memory into lots of little objects. Alan
has come up with some improvements to migtigate the sitution to
the point where even the M3 RTS only has one object for bss and
it's managed memory (when running CVSUP.) (There are still cases where the
situation isn't improved when the system pages -- but this is much much
better for the vast majority of cases.) The system will now be able
to much more effectively merge map entries.
Submitted by: Alan Cox <alc@cs.rice.edu>
if you do:
% cd /nfsdir
% mkdir -p foo/foo
% mv foo/foo .
nfs_sillyrename() self-destructs if you try to sillyrename a directory,
however nfs_rename() can be coerced into doing just that by the above
sequence of commands. To avoid this, nfs_rename() now checks that
v_type of the 'destination' vnode != VDIR before attempting the
sillyrename. The server correctly handles this particular situation
by returning ENOTEMPTY on the rename() attempt.
I asked if this was the correct fix for this on -hackers but nobody
ever answered.
This is a 2.2 candidate.
taken from the voxware-3.5 distribution. Also some changes to the SB
and MPU IRQs to reflect more common/default settings.
Submitted-By: Brian Campbell <brianc@netrover.com>
at device attach time, instead of allocating and freeing buffers as
necessary. But he or she forgot to remove the line that invalidated
the buffer when the device is closed. Therefore, after using the
device for the first time, the buffer was incorrectly invalidated and
that caused a page fault on the second, and subsequent uses.
Closes PR # kern/2319: Using Genius GS-4500 scanner...
Submitted by: jmrueda@diatel.upm.es (Javier Martmn Rueda)
