This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
Update the manpage to reflect this change.
- Always set the current position to the first null-byte when opening in append
mode. This makes the implementation compatible with glibc's. Update the test
suite.
Reported by: pho
Approved by: cognet
option. Convert all other uses to MK_CTF=no. Set MK_CTF=no rather than
the indirect WITHOUT_CDDL in filemon regression. It is expected that
NO_CTF will be removed in FreeBSD 12 entirely.
An execute-only fd (opened with O_EXEC) allows neither read() nor write()
and is therefore incompatible with all stdio modes. Therefore, the [EINVAL]
error applies.
Also adjust the similar check in freopen() with a NULL path, even though
this checks an fd which is already from a FILE.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
Interestingly, the pkill tool lives in bin, not usr.bin. Haven't bothered
to check if this is because the tool moved or because the tests were
originally added in the wrong place.
Note that these tests are for fmake, not bmake, and thus they are not
installed nor run when bmake is selected (the default). Yes, I have
wasted a *ton* of time on moving tests for no real reason other than
ensuring they are not left behind.
But maybe, just maybe, it was not work in vain: the majority of these
tests also work with bmake and the few that don't may point at broken
stuff. For example, the tests for the "archive" feature do not work
with bmake, but bmake's manpage and source tree seem to imply that they
should. So... to be investigated later; need to poke sjg@.
I'm starting with the easy cases. The leftovers need to be looked at a
bit more closely.
Note that this change _does_ modify the code of the old tests. This is
required in order to allow the code to locate the data files in the
source directory instead of the current directory, because Kyua
automatically changes the latter to a temporary directory.
Also note that at least one test is known to be broken here. Actually,
the test is not really broken: it's marked as a TODO but unfortunately
Kyua's TAP parser currently does not understand that. Will have to be
fixed separately.
This change was originally going to only migrate the usr.sbin tests but, as
it turns out, the usr.sbin/sa/ tests require files from usr.bin/lastcomm/
so it's better to just also migrate the latter at the same time. The other
usr.bin tests will be moved separately.
To make these tests work within the test suite, some of them have required
changes to prevent modifying the source directory and instead just rely on
the current directory for file manipulation.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
This function is not public and brooks (initial committer adding the code)
suggests the deletion of the tests (which I don't know if they work)
instead of changing the visibility of the function.
Just replace the simple calls to the library with ad-hoc code. We should
later rewrite these with the ATF libraries anyway, which are part of the
base system.
Tests that cannot be run because a precondition is not met should be
marked as skipped, not failed. Do this for the tests in mdconfig that
first check if the caller user is root.
Small divergences in the output padding made some sa tests fail. Just
trim all whitespace from the outputs and the golden files so comparisons
are less fragile and the tests pass again.
Because bmake is the default make being built, many of the tests here
fail due to differences between the two. Just skip the tests for now
when using fmake.
This fixes a pgrep test that assumed that PID 2 was named g_event. This
does not seem to be the case any longer (and I don't know if it ever was
in all possible setups).
Change this test to use the idle loop instead and determine its expected
PID using ps without assuming any specific ID.
First, change the driver to run the installed yacc instead of the one from
/usr/obj (which might not be there), just as we (intend to) do with all
other tests.
Second, regenerate the expected output files from scratch. Based on visual
inspection, the differences seem OK. But this highlights that the tests in
here are too fragile and, possibly, useless: we should be testing the
behavior of the generated program, not the literal output. Something to be
addressed later.
were a little broken and not automatable, with unix_seqpacket_test.
It's coverage is a superset of the old tests and it uses ATF. It
includes test cases for bugs kern/185813 and kern/185812.
PR: kern/185812
PR: kern/185813
Sponsored by: Spectra Logic
MFC after: 2 weeks
- Compile the tests with .t suffix, so prove can use them directly.
- The CHECKX() macro should increment ntest just like the CHECK() macro.
- For consistency remove # from the pwd.t output.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
This change is a proof of concept on how to easily integrate existing
tests from the tools/regression/ hierarchy into the /usr/tests/ test
suite and on how to adapt them to the new layout for src.
To achieve these goals, this change:
- Moves tests from tools/regression/bin/<tool>/ to bin/<tool>/tests/.
- Renames the previous regress.sh files to legacy_test.sh.
- Adds Makefiles to build and install the tests and all their supporting
data files into /usr/tests/bin/.
- Plugs the legacy_test test programs into the test suite using the new
TAP backend for Kyua (appearing in 0.8) so that the code of the test
programs does not have to change.
- Registers the new directories in the BSD.test.dist mtree file.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
Although <&0 does nothing, it is a redirection affecting standard input and
should therefore disable the </dev/null redirection implicit in a background
command.
This call should be a sufficiently close approximation of what happens
when a filesystem is unmounted and remounted. To be more specific, it
should test that the data that was in the page cache is the same data
that ends up on a stable storage or in a filesystem's internal cache,
if any.
This will catch the cases where a page with modified data is marked as
a clean page for whatever reason.
While there, make logging of the special events (open+close before
plus invalidation now) more generic and slightly better than the previous
hack.
MFC after: 10 days
This option should be useful for testing if a filesystem uses the
unified buffer / page cache.
Or, if filesystem's emulation of the unified cache works as expected.
This should be the case for e.g. ZFS.
MFC after: 1 week
- Fix ALWAYS_INSTALL to take precedence over the FreeBSD ID checks.
In particular, always install a file where the only change was
the FreeBSD ID even if -F is specified.
- Fix the -F option in the case that the only upstream change is a
change in the FreeBSD ID and the local file is removed.
- Add tests for these two cases.
passed to mergemaster. In this mode, only changes to /etc/master.passwd
and /etc/group are merged to /etc. In addition, it uses a temporary
tree to stage these changes rather than overwriting the existing
'current' and 'previous' trees so that a full update can be run after
a normal installworld has completed.
MFC after: 2 weeks
