sched_throw() can no longer take a NULL thread, APs enter through
sched_ap_entry() instead. This completely removes branching in the
common case and cleans up both paths. No functional change intended.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D32829
schedinit_ap() sets up an AP for a later call to sched_throw(NULL).
Currently, ULE sets up some pcpu bits and fixes the idlethread lock with
a call to sched_throw(NULL); this results in a window where curthread is
setup in platforms' init_secondary(), but it has the wrong td_lock.
Typical platform AP startup procedure looks something like:
- Setup curthread
- ... other stuff, including cpu_initclocks_ap()
- Signal smp_started
- sched_throw(NULL) to enter the scheduler
cpu_initclocks_ap() may have callouts to process (e.g., nvme) and
attempt to sched_add() for this AP, but this attempt fails because
of the noted violated assumption leading to locking heartburn in
sched_setpreempt().
Interrupts are still disabled until cpu_throw() so we're not really at
risk of being preempted -- just let the scheduler in on it a little
earlier as part of setting up curthread.
Reviewed by: alfredo, kib, markj
Triage help from: andrew, markj
Smoke-tested by: alfredo (ppc), kevans (arm64, x86), mhorne (arm)
Differential Revision: https://reviews.freebsd.org/D32797
Remove page zeroing code from consumers and stop specifying
VM_ALLOC_NOOBJ. In a few places, also convert an allocation loop to
simply use VM_ALLOC_WAITOK.
Similarly, convert vm_page_alloc_domain() callers.
Note that callers are now responsible for assigning the pindex.
Reviewed by: alc, hselasky, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31986
The implementation of the progress bar is simple, but duplicated for
most minidump implementations. Extract the common bits to kern_dump.c.
Ensure that the bar is reset with each subsequent dump; this was only
done on some platforms previously.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31885
The function is identical in each minidump implementation, so move it to
vm_phys.c. The only slight exception is powerpc where the function was
public, for use in moea64_scan_pmap().
Reviewed by: kib, markj, imp (earlier version)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31884
Move the common kernel function signatures from machine/reg.h to a new
sys/reg.h. This is in preperation for adding PT_GETREGSET to ptrace(2).
Reviewed by: imp, markj
Sponsored by: DARPA, AFRL (original work)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19830
ovbcopy is unused since 9f45b2da8f ("Define ovbcopy() as a macro
which expands to the equivalent bcopy() call")
bcopy is left in place because it is used by assembly primitives
Sponsored by: Rubicon Communications, LLC ("Netgate")
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
which is the place to put MD asserts about allocated pages.
On amd64, verify that allocated page does not belong to the kernel
(text, data) or early allocated pages.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
This reapplies 3a522ba1bc with a fix for
the static assertion failure on i386.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
amd64 and 32-bit ARM already had assertions to this effect. Add them to
other pmaps.
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31171
The syscall number is stored in the same register as the syscall return
on amd64 (and possibly other architectures) and so it is impossible to
recover in the signal handler after the call has returned. This small
tweak delivers it in the `si_value` field of the signal, which is
sufficient to catch capability violations and emulate them with a call
to a more-privileged process in the signal handler.
Approved by: markj (mentor)
Reviewed by: kib, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D29185
Use sysentvec hooks to only call umtx_thread_exit/umtx_exec, which handle
robust mutexes, for native FreeBSD ABI. Similarly, there is no sense
in calling sigfastblock_clear() for non-native ABIs.
Requested by: dchagin
Reviewed by: dchagin, markj (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D30987
This adds `sv_elf_core_osabi`, `sv_elf_core_abi_vendor`,
and `sv_elf_core_prepare_notes` fields to `struct sysentvec`,
and modifies imgact_elf.c to make use of them instead
of hardcoding FreeBSD-specific values. It also updates all
of the ABI definitions to preserve current behaviour.
This makes it possible to implement non-native ELF coredump
support without unnecessary code duplication. It will be used
for Linux coredumps.
Reviewed By: kib
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D30921
armv6 and armv7 systems already were 1000Hz. The other armv5 were a
mix of 100 and 1000. This changes them to 1000. Should there be
issues, we can add options HZ=100 to the systems that have bad
performance at the drop of a hat.
mips is a lot more complicated. But most of the systems are already
1000HZ. The hardware exceptions are all fast enough to run at
1000Hz. MALTA is our primary emulator, and history has shown emulators
tend to like 100Hz better, so run those systems at 100Hz. As with arm,
any system that shows a huge performance regression can reverted to
100Hz easily.
This was going to be committed well in advance of the 13 branch, but
it was delayed and forgotten til now.
Discussed on: #bsdmips ages ago
Sponsored by: Netflix
Many of these typedefs are the same across all architectures or can
be set based on an architecture-independent compiler-provided macro
(e.g. __SIZEOF_SIZE_T__). These macros have been available since GCC 4.6
and Clang sometime before 3.0 (godbolt.org does not have any older clang
versions installed).
I originally considered using the compiler-provided `__FOO_TYPE__` directly.
However, in order to do so we have to check that those match the previous
typedef exactly (not just that they have the same size) since any change
would be an ABI break. For example, changing `long` to `long long` results
in different C++ name mangling. Additionally, Clang and GCC disagree on
the underlying type for some of (u)int*_fast_t types, so this change
only moves the definitions that are identical across all architectures
and does not touch those types.
This de-deduplication will allow us to have a smaller diff downstream in
CheriBSD: we only have to only change the (u)intptr_t definition in
sys/_types.h in CheriBSD instead of having to change machine/_types.h for
all CHERI-enabled architectures (currently RISC-V, AArch64 and MIPS).
Reviewed By: imp, kib
Differential Revision: https://reviews.freebsd.org/D29895
Add the line that's in other foo_machdep.c file where the CPU model is
reported.
This was part of github pull request 459, but in a different way. The
rest of that pull request was either committed or not relevant. I did it
in a more correct way.
Submitted by: Priit Trees
Sponsored by: Netflix
Small patch to set "hw.model" by SoC ChipCommon ID. On BCM4718 it will be BCM4716, because 4716 is core for 4716,4717 & 4718.
Tested on Netgear WNR3500L (BCM4718) and Asus RT-N53 (BCM5357).
Reviewed by: landonf, yamori813@yahoo.co.jp
Sponsored by: Postgres Professional
Differential revision: https://reviews.freebsd.org/D12737
This is intended for use in KTLS transmit where each TLS record is
described by a single mbuf that is itself queued in the socket buffer.
Using the existing CRYPTO_BUF_MBUF would result in
bus_dmamap_load_crp() walking additional mbufs in the socket buffer
that are not relevant, but generating a S/G list that potentially
exceeds the limit of the tag (while also wasting CPU cycles).
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30136
I've seen this fail from time to time and just hang during reset.
Instead of it just hanging, just poke it again. I've not seen it
fail in hundreds of test resets now.
Tested:
* AR9344 AP/STA configuration
While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
There haven't been any non-obscure drivers that supported this
functionality and it has been impossible to test to ensure that it
still works. The only known consumer of this interface was the engine
in OpenSSL < 1.1. Modern OpenSSL versions do not include support for
this interface as it was not well-documented.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29736
This is intended to be used with memory mapped IO, e.g. from
bus_space_map with no flags, or pmap_mapdev.
Use this new memory type in the map request configured by
resource_init_map_request, and in pciconf.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29692
--Eliminate a big ifdef that encompassed all currently-supported
architectures except mips and powerpc32. This applied to the case
in which we've allocated a superpage but the pager-populated range
is insufficient for a superpage mapping. For platforms that don't
support superpages the check should be inexpensive as we shouldn't
get a superpage in the first place. Make the normal-page fallback
logic identical for all platforms and provide a simple implementation
of pmap_ps_enabled() for MIPS and Book-E/AIM32 powerpc.
--Apply the logic for handling pmap_enter() failure if a superpage
mapping can't be supported due to additional protection policy.
Use KERN_PROTECTION_FAILURE instead of KERN_FAILURE for this case,
and note Intel PKU on amd64 as the first example of such protection
policy.
Reviewed by: kib, markj, bdragon
Differential Revision: https://reviews.freebsd.org/D29439
The remote protocol allows for implementations to report more specific
reasons for the break in execution back to the client [1]. This is
entirely optional, so it is only implemented for amd64, arm64, and i386
at the moment.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
Differential Revision: https://reviews.freebsd.org/D29174
Use the new kdb variants. Print more specific error messages.
Reviewed by: jhb, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29156
This basically mirrors what already exists in ddb, but provides a
slightly improved interface. It allows the caller to specify the
watchpoint access type, and returns more specific error codes to
differentiate failure cases.
This will be used to support hardware watchpoints in gdb(4).
Stubs are provided for architectures lacking hardware watchpoint logic
(mips, powerpc, riscv), while other architectures are added individually
in follow-up commits.
Reviewed by: jhb, kib, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29155
This change serves two purposes.
First, we take advantage of the compiler provided endian definitions to
eliminate some long-standing duplication between the different versions
of this header. __BYTE_ORDER__ has been defined since GCC 4.6, so there
is no need to rely on platform defaults or e.g. __MIPSEB__ to determine
endianness. A new common sub-header is added, but there should be no
changes to the visibility of these definitions.
Second, this eliminates the hand-rolled __bswapNN() routines, again in
favor of the compiler builtins. This was done already for x86 in
e6ff6154d2. The benefit here is that we no longer have to maintain our
own implementations on each arch, and can instead rely on the compiler
to emit appropriate instructions or libcalls, as available. This should
result in equivalent or better code generation. Notably 32-bit arm will
start using the `rev` instruction for these routines, which is available
on armv6+.
PR: 236920
Reviewed by: arichardson, imp
Tested by: bdragon (BE powerpc)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29012
e4b8deb222 removed the last in-tree uses of PCPU_INC(). Its
potential benefit is also practically nonexistent. Non-x86
platforms already implement it as PCPU_ADD(..., 1), and according
to [0] there are no recent x86 processors for which the 'inc'
instruction provides a performance benefit over the equivalent
memory-operand form of the 'add' instruction. The only remaining
benefit of 'inc' is smaller instruction size, which in this case
is inconsequential given the limited number of per-CPU data consumers.
[0]: https://www.agner.org/optimize/instruction_tables.pdf
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29308
This is the only in-tree driver for the asymmetric crypto support in
OCF that is already marked deprecated for 14.
MFC after: 3 days
Sponsored by: Chelsio Communications
Some changes back in ye olde times somewhere has changed the default
block size the flash device exposes. So, the default geom redboot
FIS probing (to find the partition table structure in flash!)
is no longer finding it.
So, force it to probe at the last 64k of flash regardless of the
underlying flash block size.
Tested:
* Ubiquiti Routerstation pro, boots -HEAD MIPS
This macro returns true if a provided virtual address is contained
in the kernel's clean submap.
In CHERI kernels, the buffer cache and transient I/O map are allocated
as separate regions. Abstracting this check reduces the diff relative
to FreeBSD. It is perhaps slightly more readable as well.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D28710
Commit 248f0ca converted intrcnt and intrnames from u_long[]
and char[] to u_long* and char* respectively, but for non-INTRNG mips
these symbols were defined in .S file as a pre-allocated static arrays,
so the problem wasn't cought at compile time. Conversion from an array
to a pointer requires pointer initialization and it wasn't done
for MIPS, so whatever happenned to be in the begginning of intcnt[]
array was used as a pointer value.
Move intrcnt/intrnames to C code and allocate them dynamically
although with a fixed size at the moment.
Reviewed by: emaste
PR: 253051
Differential Revision: https://reviews.freebsd.org/D28424
MFC after: 1 day
Use a machdep.nirq tunable intead of compile-time constant NIRQ
as a value for maximum number of interrupts. It allows keep a system
footprint small by default with an option to increase the limit
for large systems like server-grade ARM64
Reviewd by: mhorne
Differential Revision: https://reviews.freebsd.org/D27844
Submitted by: Klara, Inc.
Sponsored by: Ampere Computing
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
Upon exit from the debugger, checking the return code of kdb_trap()
allows one to retry the fatal page fault. This matches what is done on
all other architectures.
Reviewed by: jhb (earlier version)
Differential Revision: https://reviews.freebsd.org/D27535
These aligned the address but then always used the least significant
bits of the value in memory, which is the wrong half 50% of the time for
16-bit atomics and the wrong quarter 75% of the time for 8-bit atomics.
These bugs were all present in r178172, the commit that added the mips
port, and have remained for its entire existence to date.
Reviewed by: jhb (mentor)
Approved by: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D27343
