GELI is used on a SSD or inside virtual machine, so that guest can tell
host that it is no longer using some of the storage.
Enabling BIO_DELETE passthru comes with a small security consequence - an
attacker can tell how much space is being really used on encrypted device and
has less data no analyse then. This is why the -T option can be given to the
init subcommand to turn off this behaviour and -t/T options for the configure
subcommand can be used to adjust this setting later.
PR: 198863
Submitted by: Matthew D. Fuller fullermd at over-yonder dot net
This commit also includes a fix from Fabian Keil freebsd-listen at
fabiankeil.de for 'configure' on onetime providers which is not strictly
related, but is entangled in the same code, so would cause conflicts if
separated out.
so we cannot access it anymore. Setting an error later lead to memory
corruption.
Assert that crypto_dispatch() was successful. It can fail only if we pass a
bogus crypto request, which is a bug in the program, not a runtime condition.
PR: 199705
Submitted by: luke.tw
Reviewed by: emaste
MFC after: 3 days
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
variable (if any) provided in the boot environment. Unset it from
the kernel environment after doing this, so that the passphrase is
no longer present in kernel memory once we enter userland.
This will make it possible to provide a GELI passphrase via the boot
loader; FreeBSD's loader does not yet do this, but GRUB (and PCBSD)
will have support for this soon.
Tested by: kmoore
in order to improve user-friendliness when a system has multiple disks
encrypted using the same passphrase.
When examining a new GELI provider, the most recently used passphrase
will be attempted before prompting for a passphrase; and whenever a
passphrase is entered, it is cached for later reference. When the root
disk is mounted, the cached passphrase is zeroed (triggered by the
"mountroot" event), in order to minimize the possibility of leakage
of passphrases. (After root is mounted, the "taste and prompt for
passphrases on the console" code path is disabled, so there is no
potential for a passphrase to be stored after the zeroing takes place.)
This behaviour can be disabled by setting kern.geom.eli.boot_passcache=0.
Reviewed by: pjd, dteske, allanjude
MFC after: 7 days
driver when it hits a mbuf/iov buffer, it mallocs and copies the data
for processing.. This improves perf by ~8-10% on my machine...
I have thoughts of fixing AES-NI so that it can better handle segmented
buffers, which should help improve IPSEC performance, but that is for
the future...
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
k_ipad.
Note that the two consumers in geli(4) are not affected by this
issue because the way the code is constructed and as such, we
believe there is no security impact with or without this change
with geli(4)'s usage.
Reported by: Serge van den Boom <serge vdboom.org>
Reviewed by: pjd
MFC after: 2 weeks
Without this change, in the worst but unlikely case scenario, certain
administrative operations, including change of configuration, set or
delete key from a GEOM ELI provider, may leave potentially sensitive
information in buffer allocated from kernel memory.
We believe that it is not possible to actively exploit these issues, nor
does it impact the security of normal usage of GEOM ELI providers when
these operations are not performed after system boot.
Security: possible sensitive information disclosure
Submitted by: Clement Lecigne <clecigne google com>
MFC after: 3 days
always wait for provider close. Old algorithm was reported to cause NULL
dereference panic on attempt to close provider after softc destruction.
If not global workaroung in GEOM, that could even cause destruction with
requests still in flight.
If GELI provider was created on FreeBSD HEAD r238116 or later (but before this
change), it is using very weak keys and the data is not protected.
The bug was introduced on 4th July 2012.
One can verify if its provider was created with weak keys by running:
# geli dump <provider> | grep version
If the version is 7 and the system didn't include this fix when provider was
initialized, then the data has to be backed up, underlying provider overwritten
with random data, system upgraded and provider recreated.
Reported by: Fabian Keil <fk@fabiankeil.de>
Tested by: Fabian Keil <fk@fabiankeil.de>
Discussed with: so
MFC after: 3 days
Before this change the IV-Key was used to generate encryption keys,
which was incorrect, but safe - for the XTS mode this key was unused
anyway and for CBC mode it was used differently to generate IV
vectors, so there is no risk that IV vector collides with encryption
key somehow.
Bump version number and keep compatibility for older versions.
MFC after: 2 weeks
start only one worker thread. For software crypto it will start by default
N worker threads where N is the number of available CPUs.
This is not optimal if hardware crypto is AES-NI, which uses CPU for AES
calculations.
Change that to always start one worker thread for every available CPU.
Number of worker threads per GELI provider can be easly reduced with
kern.geom.eli.threads sysctl/tunable and even for software crypto it
should be reduced when using more providers.
While here, when number of threads exceeds number of CPUs avilable don't
reduce this number, assume the user knows what he is doing.
Reported by: Yuri Karaban <dev@dev97.com>
MFC after: 3 days
with older FreeBSD versions:
- Add -V option to 'geli init' to specify version number. If no -V is given
the most recent version is used.
- If -V is given don't allow to use features not supported by this version.
- Print version in 'geli list' output.
- Update manual page and add table describing which GELI version is
supported by which FreeBSD version, so one can use it when preparing GELI
device for older FreeBSD version.
Inspired by: Garrett Cooper <yanegomi@gmail.com>
MFC after: 3 days
was not updated to pass CRD_F_KEY_EXPLICIT flag to opencrypto. This resulted in
always using first key.
We need to support providers created with this bug, so set special
G_ELI_FLAG_FIRST_KEY flag for GELI provider in integrity mode with version
smaller than 6 and pass the CRD_F_KEY_EXPLICIT flag to opencrypto only if
G_ELI_FLAG_FIRST_KEY doesn't exist.
Reported by: Anton Yuzhaninov <citrin@citrin.ru>
MFC after: 1 week
cpuset_t objects.
That is going to offer the underlying support for a simple bump of
MAXCPU and then support for number of cpus > 32 (as it is today).
Right now, cpumask_t is an int, 32 bits on all our supported architecture.
cpumask_t on the other side is implemented as an array of longs, and
easilly extendible by definition.
The architectures touched by this commit are the following:
- amd64
- i386
- pc98
- arm
- ia64
- XEN
while the others are still missing.
Userland is believed to be fully converted with the changes contained
here.
Some technical notes:
- This commit may be considered an ABI nop for all the architectures
different from amd64 and ia64 (and sparc64 in the future)
- per-cpu members, which are now converted to cpuset_t, needs to be
accessed avoiding migration, because the size of cpuset_t should be
considered unknown
- size of cpuset_t objects is different from kernel and userland (this is
primirally done in order to leave some more space in userland to cope
with KBI extensions). If you need to access kernel cpuset_t from the
userland please refer to example in this patch on how to do that
correctly (kgdb may be a good source, for example).
- Support for other architectures is going to be added soon
- Only MAXCPU for amd64 is bumped now
The patch has been tested by sbruno and Nicholas Esborn on opteron
4 x 12 pack CPUs. More testing on big SMP is expected to came soon.
pluknet tested the patch with his 8-ways on both amd64 and i386.
Tested by: pluknet, sbruno, gianni, Nicholas Esborn
Reviewed by: jeff, jhb, sbruno
bytes. Remove bogus assertion and while here remove another too obvious
assertion.
Reported by: Fabian Keil <freebsd-listen@fabiankeil.de>
MFC after: 2 weeks
allocate all of them at attach time. This allows to avoid moving
keys around in the most-recently-used queue and needs no mutex
synchronization nor refcounting.
MFC after: 2 weeks
create reasonably large cache for the keys that is filled when
needed. The previous version was problematic for very large providers
(hundreds of terabytes or serval petabytes). Every terabyte of data
needs around 256kB for keys. Make the default cache limit big enough
to fit all the keys needed for 4TB providers, which will eat at most
1MB of memory.
MFC after: 2 weeks
bio_children > 1, g_destroy_bio() is never called and the bio
leaks. Fix this by calling g_destroy_bio() earlier, before the check.
Submitted by: Victor Balada Diaz <victor@bsdes.net> (initial version)
Approved by: pjd (mentor)
MFC after: 1 week
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: silence on geom@ during 2 weeks
X-MFC after: to be determined in last commit with code from this project
