Commit Graph

1143 Commits

Author SHA1 Message Date
Gvozden Neskovic
1bf3bf0e29 Fix handling of errors nvlist in zfs_ioc_recv_new()
zfs_ioc_recv_impl() is changed to always allocate the 'errors'
nvlist, its callers are responsible for freeing it.

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4829
2016-07-13 10:20:08 -07:00
Peng
81edd3e834 Fix PANIC: metaslab_free_dva(): bad DVA X:Y:Z
The following scenario can result in garbage in the dn_spill field.
The db->db_blkptr must be set to NULL when DNODE_FLAG_SPILL_BLKPTR
is clear to ensure the dn_spill field is cleared.

Current txg = A.
* A new spill buffer is created. Its dbuf is initialized with
  db_blkptr = NULL and it's dirtied.

Current txg = B.
* The spill buffer is modified. It's marked as dirty in this txg.
* Additional changes make the spill buffer unnecessary because the
  xattr fits into the bonus buffer, so it's removed. The dbuf is
  undirtied in this txg, but it's still referenced and cannot be
  destroyed.

Current txg = C.
* Starts syncing of txg A
* dbuf_sync_leaf() is called for the spill buffer. Since db_blkptr
  is NULL, dbuf_check_blkptr() is called.
* The dbuf starts being written and it reaches the ready state
  (not done yet).
* A new change makes the spill buffer necessary again.
  sa_build_layouts() ends up calling dbuf_find() to locate the
  dbuf.  It finds the old dbuf because it has not been destroyed yet
  (it will be destroyed when the previous write is done and there
  are no more references). The old dbuf has db_blkptr != NULL.
* txg A write is complete and the dbuf released. However it's still
  referenced, so it's not destroyed.

Current txg = D.
* Starts syncing of txg B
* dbuf_sync_leaf() is called for the bonus buffer. Its contents are
  directly copied into the dnode, overwriting the blkptr area because,
  in txg B, the bonus buffer was big enough to hold the entire xattr.
* At this point, the db_blkptr of the spill buffer used in txg C
  gets corrupted.

Signed-off-by: Peng <peng.hse@xtaotech.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3937
2016-07-12 16:47:44 -07:00
Chunwei Chen
31b6111fd9 Kill zp->z_xattr_parent to prevent pinning
zp->z_xattr_parent will pin the parent. This will cause huge issue
when unlink a file with xattr. Because the unlinked file is pinned, it
will never get purged immediately. And because of that, the xattr
stuff will never be marked as unlinked. So the whole unlinked stuff
will stay there until shrink cache or umount.

This change partially reverts e89260a.  This is safe because only the
zp->z_xattr_parent optimization is removed, zpl_xattr_security_init()
is still called from the zpl outside the inode lock.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Issue #4359
Issue #3508
Issue #4413
Issue #4827
2016-07-12 14:18:10 -07:00
Chunwei Chen
ddae16a9cf xattr dir doesn't get purged during iput
We need to set inode->i_nlink to zero so iput will purge it. Without this, it
will get purged during shrink cache or umount, which would likely result in
deadlock due to zfs_zget waiting forever on its children which are in the
dispose_list of the same thread.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Issue #4359
Issue #3508
Issue #4413
Issue #4827
2016-07-12 14:04:30 -07:00
Chunwei Chen
6c2530647c fh_to_dentry should return ESTALE when generation mismatch
When generation mismatch, it usually means the file pointed by the file handle
was deleted. We should return ESTALE to indicate this. We return ENOENT in
zfs_vget since zpl_fh_to_dentry will convert it to ESTALE.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4828
2016-07-12 13:34:15 -07:00
Chunwei Chen
bffb68a2b8 Fix Large kmem_alloc in vdev_metaslab_init
This allocation can go way over 1MB, so we should use vmem_alloc
instead of kmem_alloc.

  Large kmem_alloc(1430784, 0x1000), please file an issue...
  Call Trace:
   [<ffffffffa0324aff>] ? spl_kmem_zalloc+0xef/0x160 [spl]
   [<ffffffffa17d0c8d>] ? vdev_metaslab_init+0x9d/0x1f0 [zfs]
   [<ffffffffa17d46d0>] ? vdev_load+0xc0/0xd0 [zfs]
   [<ffffffffa17d4643>] ? vdev_load+0x33/0xd0 [zfs]
   [<ffffffffa17c0004>] ? spa_load+0xfc4/0x1b60 [zfs]
   [<ffffffffa17c1838>] ? spa_tryimport+0x98/0x430 [zfs]
   [<ffffffffa17f28b1>] ? zfs_ioc_pool_tryimport+0x41/0x80 [zfs]
   [<ffffffffa17f5669>] ? zfsdev_ioctl+0x4a9/0x4e0 [zfs]
   [<ffffffff811bacdf>] ? do_vfs_ioctl+0x2cf/0x4b0
   [<ffffffff811baf41>] ? SyS_ioctl+0x81/0xa0

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4752
2016-07-12 13:34:15 -07:00
Chunwei Chen
7938c2aca7 Don't allow accessing XATTR via export handle
Allow accessing XATTR through export handle is a very bad idea. It
would allow user to write whatever they want in fields where they
otherwise could not.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4828
2016-07-12 13:34:14 -07:00
Chunwei Chen
061460dfe2 Fix get_zfs_sb race with concurrent umount
Certain ioctl operations will call get_zfs_sb, which will holds an active
count on sb without checking whether it's active or not. This will result
in use-after-free. We fix this by using atomic_inc_not_zero to make sure
we got an active sb.

P1                                          P2
---                                         ---
deactivate_locked_super(): s_active = 0
                                            zfs_sb_hold()
                                            ->get_zfs_sb(): s_active = 1
->zpl_kill_sb()
-->zpl_put_super()
--->zfs_umount()
---->zfs_sb_free(zsb)
                                            zfs_sb_rele(zsb)

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-07-12 13:34:14 -07:00
Gvozden Neskovic
590c9a0994 Allow building with CFLAGS="-O0"
If compiled with -O0, gcc doesn't do any stack frame coalescing
and -Wframe-larger-than=1024 is triggered in debug mode.
Starting with gcc 4.8, new opt level -Og is introduced for debugging, which
does not trigger this warning.

Fix bench zio size, using SPA_OLD_MAXBLOCKSHIFT

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4799
2016-07-11 16:53:02 -07:00
Paul Dagnelie
d1d19c7854 OpenZFS 6876 - Stack corruption after importing a pool with a too-long name
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Calling dsl_dataset_name on a dataset with a 256 byte buffer is asking
for trouble. We should check every dataset on import, using a 1024 byte
buffer and checking each time to see if the dataset's new name is longer
than 256 bytes.

OpenZFS-issue: https://www.illumos.org/issues/6876
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ca8674e
2016-06-28 13:47:04 -07:00
Igor Kozhukhov
eca7b76001 OpenZFS 6314 - buffer overflow in dsl_dataset_name
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6314
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d6160ee
2016-06-28 13:47:03 -07:00
Brian Behlendorf
43e52eddb1 Implement zfs_ioc_recv_new() for OpenZFS 2605
Adds ZFS_IOC_RECV_NEW for resumable streams and preserves the legacy
ZFS_IOC_RECV user/kernel interface.  The new interface supports all
stream options but is currently only used for resumable streams.
This way updated user space utilities will interoperate with older
kernel modules.

ZFS_IOC_RECV_NEW is modeled after the existing ZFS_IOC_SEND_NEW
handler.  Non-Linux OpenZFS platforms have opted to change the
legacy interface in an incompatible fashion instead of adding a
new ioctl.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-06-28 13:47:03 -07:00
Dan McDonald
8c62a0d0f3 OpenZFS 6562 - Refquota on receive doesn't account for overage
Authored by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6562
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5f7a8e6
2016-06-28 13:47:03 -07:00
Dan McDonald
671c93546c OpenZFS 4986 - receiving replication stream fails if any snapshot exceeds refquota
Authored by: Dan McDonald <danmcd@omniti.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/4986
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5878fad
2016-06-28 13:47:03 -07:00
Eli Rosenthal
f8866f8ae3 OpenZFS 6738 - zfs send stream padding needs documentation
Authored by: Eli Rosenthal <eli.rosenthal@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6738
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c20404ff
2016-06-28 13:47:03 -07:00
Andrew Stormont
b607405fea OpenZFS 6536 - zfs send: want a way to disable setting of DRR_FLAG_FREERECORDS
Authored by: Andrew Stormont <astormont@racktopsystems.com>
Reviewed by: Anil Vijarnia <avijarnia@racktopsystems.com>
Reviewed by: Kim Shrier <kshrier@racktopsystems.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6536
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/880094b
2016-06-28 13:47:03 -07:00
Paul Dagnelie
e6d3a843d6 OpenZFS 6393 - zfs receive a full send as a clone
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6394
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/68ecb2e
2016-06-28 13:47:03 -07:00
Matthew Ahrens
47dfff3b86 OpenZFS 2605, 6980, 6902
2605 want to resume interrupted zfs send
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/2605
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12

6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6980
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f

Porting notes:
- All rsend and snapshop tests enabled and updated for Linux.
- Fix misuse of input argument in traverse_visitbp().
- Fix ISO C90 warnings and errors.
- Fix gcc 'missing braces around initializer' in
  'struct send_thread_arg to_arg =' warning.
- Replace 4 argument fletcher_4_native() with 3 argument version,
  this change was made in OpenZFS 4185 which has not been ported.
- Part of the sections for 'zfs receive' and 'zfs send' was
  rewritten and reordered to approximate upstream.
- Fix mktree xattr creation, 'user.' prefix required.
- Minor fixes to newly enabled test cases
- Long holds for volumes allowed during receive for minor registration.
2016-06-28 13:47:02 -07:00
Ned Bass
50c957f702 Implement large_dnode pool feature
Justification
-------------

This feature adds support for variable length dnodes. Our motivation is
to eliminate the overhead associated with using spill blocks.  Spill
blocks are used to store system attribute data (i.e. file metadata) that
does not fit in the dnode's bonus buffer. By allowing a larger bonus
buffer area the use of a spill block can be avoided.  Spill blocks
potentially incur an additional read I/O for every dnode in a dnode
block. As a worst case example, reading 32 dnodes from a 16k dnode block
and all of the spill blocks could issue 33 separate reads. Now suppose
those dnodes have size 1024 and therefore don't need spill blocks.  Then
the worst case number of blocks read is reduced to from 33 to two--one
per dnode block. In practice spill blocks may tend to be co-located on
disk with the dnode blocks so the reduction in I/O would not be this
drastic. In a badly fragmented pool, however, the improvement could be
significant.

ZFS-on-Linux systems that make heavy use of extended attributes would
benefit from this feature. In particular, ZFS-on-Linux supports the
xattr=sa dataset property which allows file extended attribute data
to be stored in the dnode bonus buffer as an alternative to the
traditional directory-based format. Workloads such as SELinux and the
Lustre distributed filesystem often store enough xattr data to force
spill bocks when xattr=sa is in effect. Large dnodes may therefore
provide a performance benefit to such systems.

Other use cases that may benefit from this feature include files with
large ACLs and symbolic links with long target names. Furthermore,
this feature may be desirable on other platforms in case future
applications or features are developed that could make use of a
larger bonus buffer area.

Implementation
--------------

The size of a dnode may be a multiple of 512 bytes up to the size of
a dnode block (currently 16384 bytes). A dn_extra_slots field was
added to the current on-disk dnode_phys_t structure to describe the
size of the physical dnode on disk. The 8 bits for this field were
taken from the zero filled dn_pad2 field. The field represents how
many "extra" dnode_phys_t slots a dnode consumes in its dnode block.
This convention results in a value of 0 for 512 byte dnodes which
preserves on-disk format compatibility with older software.

Similarly, the in-memory dnode_t structure has a new dn_num_slots field
to represent the total number of dnode_phys_t slots consumed on disk.
Thus dn->dn_num_slots is 1 greater than the corresponding
dnp->dn_extra_slots. This difference in convention was adopted
because, unlike on-disk structures, backward compatibility is not a
concern for in-memory objects, so we used a more natural way to
represent size for a dnode_t.

The default size for newly created dnodes is determined by the value of
a new "dnodesize" dataset property. By default the property is set to
"legacy" which is compatible with older software. Setting the property
to "auto" will allow the filesystem to choose the most suitable dnode
size. Currently this just sets the default dnode size to 1k, but future
code improvements could dynamically choose a size based on observed
workload patterns. Dnodes of varying sizes can coexist within the same
dataset and even within the same dnode block. For example, to enable
automatically-sized dnodes, run

 # zfs set dnodesize=auto tank/fish

The user can also specify literal values for the dnodesize property.
These are currently limited to powers of two from 1k to 16k. The
power-of-2 limitation is only for simplicity of the user interface.
Internally the implementation can handle any multiple of 512 up to 16k,
and consumers of the DMU API can specify any legal dnode value.

The size of a new dnode is determined at object allocation time and
stored as a new field in the znode in-memory structure. New DMU
interfaces are added to allow the consumer to specify the dnode size
that a newly allocated object should use. Existing interfaces are
unchanged to avoid having to update every call site and to preserve
compatibility with external consumers such as Lustre. The new
interfaces names are given below. The versions of these functions that
don't take a dnodesize parameter now just call the _dnsize() versions
with a dnodesize of 0, which means use the legacy dnode size.

New DMU interfaces:
  dmu_object_alloc_dnsize()
  dmu_object_claim_dnsize()
  dmu_object_reclaim_dnsize()

New ZAP interfaces:
  zap_create_dnsize()
  zap_create_norm_dnsize()
  zap_create_flags_dnsize()
  zap_create_claim_norm_dnsize()
  zap_create_link_dnsize()

The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The
spa_maxdnodesize() function should be used to determine the maximum
bonus length for a pool.

These are a few noteworthy changes to key functions:

* The prototype for dnode_hold_impl() now takes a "slots" parameter.
  When the DNODE_MUST_BE_FREE flag is set, this parameter is used to
  ensure the hole at the specified object offset is large enough to
  hold the dnode being created. The slots parameter is also used
  to ensure a dnode does not span multiple dnode blocks. In both of
  these cases, if a failure occurs, ENOSPC is returned. Keep in mind,
  these failure cases are only possible when using DNODE_MUST_BE_FREE.

  If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0.
  dnode_hold_impl() will check if the requested dnode is already
  consumed as an extra dnode slot by an large dnode, in which case
  it returns ENOENT.

* The function dmu_object_alloc() advances to the next dnode block
  if dnode_hold_impl() returns an error for a requested object.
  This is because the beginning of the next dnode block is the only
  location it can safely assume to either be a hole or a valid
  starting point for a dnode.

* dnode_next_offset_level() and other functions that iterate
  through dnode blocks may no longer use a simple array indexing
  scheme. These now use the current dnode's dn_num_slots field to
  advance to the next dnode in the block. This is to ensure we
  properly skip the current dnode's bonus area and don't interpret it
  as a valid dnode.

zdb
---
The zdb command was updated to display a dnode's size under the
"dnsize" column when the object is dumped.

For ZIL create log records, zdb will now display the slot count for
the object.

ztest
-----
Ztest chooses a random dnodesize for every newly created object. The
random distribution is more heavily weighted toward small dnodes to
better simulate real-world datasets.

Unused bonus buffer space is filled with non-zero values computed from
the object number, dataset id, offset, and generation number.  This
helps ensure that the dnode traversal code properly skips the interior
regions of large dnodes, and that these interior regions are not
overwritten by data belonging to other dnodes. A new test visits each
object in a dataset. It verifies that the actual dnode size matches what
was stored in the ztest block tag when it was created. It also verifies
that the unused bonus buffer space is filled with the expected data
patterns.

ZFS Test Suite
--------------
Added six new large dnode-specific tests, and integrated the dnodesize
property into existing tests for zfs allow and send/recv.

Send/Receive
------------
ZFS send streams for datasets containing large dnodes cannot be received
on pools that don't support the large_dnode feature. A send stream with
large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be
unrecognized by an incompatible receiving pool so that the zfs receive
will fail gracefully.

While not implemented here, it may be possible to generate a
backward-compatible send stream from a dataset containing large
dnodes. The implementation may be tricky, however, because the send
object record for a large dnode would need to be resized to a 512
byte dnode, possibly kicking in a spill block in the process. This
means we would need to construct a new SA layout and possibly
register it in the SA layout object. The SA layout is normally just
sent as an ordinary object record. But if we are constructing new
layouts while generating the send stream we'd have to build the SA
layout object dynamically and send it at the end of the stream.

For sending and receiving between pools that do support large dnodes,
the drr_object send record type is extended with a new field to store
the dnode slot count. This field was repurposed from unused padding
in the structure.

ZIL Replay
----------
The dnode slot count is stored in the uppermost 8 bits of the lr_foid
field. The bits were unused as the object id is currently capped at
48 bits.

Resizing Dnodes
---------------
It should be possible to resize a dnode when it is dirtied if the
current dnodesize dataset property differs from the dnode's size, but
this functionality is not currently implemented. Clearly a dnode can
only grow if there are sufficient contiguous unused slots in the
dnode block, but it should always be possible to shrink a dnode.
Growing dnodes may be useful to reduce fragmentation in a pool with
many spill blocks in use. Shrinking dnodes may be useful to allow
sending a dataset to a pool that doesn't support the large_dnode
feature.

Feature Reference Counting
--------------------------
The reference count for the large_dnode pool feature tracks the
number of datasets that have ever contained a dnode of size larger
than 512 bytes. The first time a large dnode is created in a dataset
the dataset is converted to an extensible dataset. This is a one-way
operation and the only way to decrement the feature count is to
destroy the dataset, even if the dataset no longer contains any large
dnodes. The complexity of reference counting on a per-dnode basis was
too high, so we chose to track it on a per-dataset basis similarly to
the large_block feature.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3542
2016-06-24 13:13:21 -07:00
Ned Bass
68cbd56e18 Backfill metadnode more intelligently
Only attempt to backfill lower metadnode object numbers if at least
4096 objects have been freed since the last rescan, and at most once
per transaction group. This avoids a pathology in dmu_object_alloc()
that caused O(N^2) behavior for create-heavy workloads and
substantially improves object creation rates.  As summarized by
@mahrens in #4636:

"Normally, the object allocator simply checks to see if the next
object is available. The slow calls happened when dmu_object_alloc()
checks to see if it can backfill lower object numbers. This happens
every time we move on to a new L1 indirect block (i.e. every 32 *
128 = 4096 objects).  When re-checking lower object numbers, we use
the on-disk fill count (blkptr_t:blk_fill) to quickly skip over
indirect blocks that don’t have enough free dnodes (defined as an L2
with at least 393,216 of 524,288 dnodes free). Therefore, we may
find that a block of dnodes has a low (or zero) fill count, and yet
we can’t allocate any of its dnodes, because they've been allocated
in memory but not yet written to disk. In this case we have to hold
each of the dnodes and then notice that it has been allocated in
memory.

The end result is that allocating N objects in the same TXG can
require CPU usage proportional to N^2."

Add a tunable dmu_rescan_dnode_threshold to define the number of
objects that must be freed before a rescan is performed. Don't bother
to export this as a module option because testing doesn't show a
compelling reason to change it. The vast majority of the performance
gain comes from limit the rescan to at most once per TXG.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-06-24 13:13:12 -07:00
smh
d14fa5dba1 FreeBSD rS271776 - Persist vdev_resilver_txg changes
Persist vdev_resilver_txg changes to avoid panic caused by validation
vs a vdev_resilver_txg value from a previous resilver.

Authored-by: smh <smh@FreeBSD.org>
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/5154
FreeBSD-issue: https://reviews.freebsd.org/rS271776
FreeBSD-commit: https://github.com/freebsd/freebsd/commit/c3c60bf
Closes #4790
2016-06-24 13:02:42 -07:00
Nav Ravindranath
784d15c14c OpenZFS 6878 - Add scrub completion info to "zpool history"
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Authored by: Nav Ravindranath <nav@delphix.com>
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6878
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1825bc5
Closes #4787
2016-06-24 13:01:31 -07:00
Paul Dagnelie
bc77ba73fe OpenZFS 6513 - partially filled holes lose birth time
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>a
Ported by: Boris Protopopov <bprotopopov@actifio.com>
Signed-off-by: Boris Protopopov <bprotopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6513
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8df0bcf0

If a ZFS object contains a hole at level one, and then a data block is
created at level 0 underneath that l1 block, l0 holes will be created.
However, these l0 holes do not have the birth time property set; as a
result, incremental sends will not send those holes.

Fix is to modify the dbuf_read code to fill in birth time data.
2016-06-21 10:55:13 -07:00
Chunwei Chen
100a91aa3e Fix NFS credential
The commit f74b821 caused a regression where creating file through NFS will
always create a file owned by root. This is because the patch enables the KSID
code in zfs_acl_ids_create, which it would use euid and egid of the current
process. However, on Linux, we should use fsuid and fsgid for file operations,
which is the original behaviour. So we revert this part of code.

The patch also enables secpolicy_vnode_*, since they are also used in file
operations, we change them to use fsuid and fsgid.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4772
Closes #4758
2016-06-21 09:58:37 -07:00
Gvozden Neskovic
ab9f4b0b82 SIMD implementation of vdev_raidz generate and reconstruct routines
This is a new implementation of RAIDZ1/2/3 routines using x86_64
scalar, SSE, and AVX2 instruction sets. Included are 3 parity
generation routines (P, PQ, and PQR) and 7 reconstruction routines,
for all RAIDZ level. On module load, a quick benchmark of supported
routines will select the fastest for each operation and they will
be used at runtime. Original implementation is still present and
can be selected via module parameter.

Patch contains:
- specialized gen/rec routines for all RAIDZ levels,
- new scalar raidz implementation (unrolled),
- two x86_64 SIMD implementations (SSE and AVX2 instructions sets),
- fastest routines selected on module load (benchmark).
- cmd/raidz_test - verify and benchmark all implementations
- added raidz_test to the ZFS Test Suite

New zfs module parameters:
- zfs_vdev_raidz_impl (str): selects the implementation to use. On
  module load, the parameter will only accept first 3 options, and
  the other implementations can be set once module is finished
  loading. Possible values for this option are:
    "fastest" - use the fastest math available
    "original" - use the original raidz code
    "scalar" - new scalar impl
    "sse" - new SSE impl if available
    "avx2" - new AVX2 impl if available

See contents of `/sys/module/zfs/parameters/zfs_vdev_raidz_impl` to
get the list of supported values. If an implementation is not supported
on the system, it will not be shown. Currently selected option is
enclosed in `[]`.

Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4328
2016-06-21 09:27:26 -07:00
Tim Chase
09fb30e5e9 Linux 4.6 compat: Fall back to d_prune_aliases() if necessary
As of 4.6, the icache and dcache LRUs are memcg aware insofar as the
kernel's per-superblock shrinker is concerned.  The effect is that dcache
or icache entries added by a task in a non-root memcg won't be scanned
by the shrinker in the context of the root (or NULL) memcg.  This defeats
the attempts by zfs_sb_prune() to unpin buffers and can allow metadata to
grow uncontrollably.  This patch reverts to the d_prune_aliaes() method
in case the kernel's per-superblock shrinker is not able to free anything.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes: #4726
2016-06-17 13:33:49 -07:00
Brian Behlendorf
f74b821a66 Add zfs allow and zfs unallow support
ZFS allows for specific permissions to be delegated to normal users
with the `zfs allow` and `zfs unallow` commands.  In addition, non-
privileged users should be able to run all of the following commands:

  * zpool [list | iostat | status | get]
  * zfs [list | get]

Historically this functionality was not available on Linux.  In order
to add it the secpolicy_* functions needed to be implemented and mapped
to the equivalent Linux capability.  Only then could the permissions on
the `/dev/zfs` be relaxed and the internal ZFS permission checks used.

Even with this change some limitations remain.  Under Linux only the
root user is allowed to modify the namespace (unless it's a private
namespace).  This means the mount, mountpoint, canmount, unmount,
and remount delegations cannot be supported with the existing code.  It
may be possible to add this functionality in the future.

This functionality was validated with the cli_user and delegation test
cases from the ZFS Test Suite.  These tests exhaustively verify each
of the supported permissions which can be delegated and ensures only
an authorized user can perform it.

Two minor bug fixes were required for test-running.py.  First, the
Timer() object cannot be safely created in a `try:` block when there
is an unconditional `finally` block which references it.  Second,
when running as a normal user also check for scripts using the
both the .ksh and .sh suffixes.

Finally, existing users who are simulating delegations by setting
group permissions on the /dev/zfs device should revert that
customization when updating to a version with this change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #362 
Closes #434 
Closes #4100
Closes #4394 
Closes #4410 
Closes #4487
2016-06-07 09:16:52 -07:00
Chunwei Chen
6a79672530 Fix memleak in vdev_config_generate_stats
fnvlist_add_nvlist will copy the contents of nvx, so we need to
free it here.

unreferenced object 0xffff8800a6934e80 (size 64):
  comm "zpool", pid 3398, jiffies 4295007406 (age 214.180s)
  hex dump (first 32 bytes):
    60 06 c2 73 00 88 ff ff 00 7c 8c 73 00 88 ff ff  `..s.....|.s....
    00 00 00 00 00 00 00 00 40 b0 70 c0 ff ff ff ff  ........@.p.....
  backtrace:
    [<ffffffff81810c4e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811fac7d>] __kmalloc_node+0x17d/0x310
    [<ffffffffc065528c>] spl_kmem_alloc_impl+0xac/0x180 [spl]
    [<ffffffffc0657379>] spl_vmem_alloc+0x19/0x20 [spl]
    [<ffffffffc07056cf>] nv_alloc_sleep_spl+0x1f/0x30 [znvpair]
    [<ffffffffc07006b7>] nvlist_xalloc.part.13+0x27/0xc0 [znvpair]
    [<ffffffffc07007ad>] nvlist_alloc+0x3d/0x40 [znvpair]
    [<ffffffffc0703abc>] fnvlist_alloc+0x2c/0x80 [znvpair]
    [<ffffffffc07b1783>] vdev_config_generate_stats+0x83/0x370 [zfs]
    [<ffffffffc07b1f53>] vdev_config_generate+0x4e3/0x650 [zfs]
    [<ffffffffc07996db>] spa_config_generate+0x20b/0x4b0 [zfs]
    [<ffffffffc0794f64>] spa_tryimport+0xc4/0x430 [zfs]
    [<ffffffffc07d11d8>] zfs_ioc_pool_tryimport+0x68/0x110 [zfs]
    [<ffffffffc07d4fc6>] zfsdev_ioctl+0x646/0x7a0 [zfs]
    [<ffffffff81232e31>] do_vfs_ioctl+0xa1/0x5b0
    [<ffffffff812333b9>] SyS_ioctl+0x79/0x90

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4707
Issue #4708
2016-05-31 16:05:21 -07:00
Chunwei Chen
06ee0031a6 Fix memleak in zpl_parse_options
strsep() will advance tmp_mntopts, and will change it to NULL on last
iteration.  This will cause strfree(tmp_mntopts) to not free anything.

unreferenced object 0xffff8800883976c0 (size 64):
  comm "mount.zfs", pid 3361, jiffies 4294931877 (age 1482.408s)
  hex dump (first 32 bytes):
    72 77 00 73 74 72 69 63 74 61 74 69 6d 65 00 7a  rw.strictatime.z
    66 73 75 74 69 6c 00 6d 6e 74 70 6f 69 6e 74 3d  fsutil.mntpoint=
  backtrace:
    [<ffffffff81810c4e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811f9cac>] __kmalloc+0x16c/0x250
    [<ffffffffc065ce9b>] strdup+0x3b/0x60 [spl]
    [<ffffffffc080fad6>] zpl_parse_options+0x56/0x300 [zfs]
    [<ffffffffc080fe46>] zpl_mount+0x36/0x80 [zfs]
    [<ffffffff81222dc8>] mount_fs+0x38/0x160
    [<ffffffff81240097>] vfs_kern_mount+0x67/0x110
    [<ffffffff812428e0>] do_mount+0x250/0xe20
    [<ffffffff812437d5>] SyS_mount+0x95/0xe0
    [<ffffffff8181aff6>] entry_SYSCALL_64_fastpath+0x1e/0xa8
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4706
Issue #4708
2016-05-31 16:04:26 -07:00
Chunwei Chen
540c392793 Fix out-of-bound access in zfs_fillpage
The original code will do an out-of-bound access on pl[] during last
iteration.

 ==================================================================
 BUG: KASAN: stack-out-of-bounds in zfs_getpage+0x14c/0x2d0 [zfs]
 Read of size 8 by task tmpfile/7850
 page:ffffea00017c6dc0 count:0 mapcount:0 mapping:          (null) index:0x0
 flags: 0xffff8000000000()
 page dumped because: kasan: bad access detected
 CPU: 3 PID: 7850 Comm: tmpfile Tainted: G           OE   4.6.0+ #3
  ffff88005f1b7678 0000000006dbe035 ffff88005f1b7508 ffffffff81635618
  ffff88005f1b7678 ffff88005f1b75a0 ffff88005f1b7590 ffffffff81313ee8
  ffffea0001ae8dd0 ffff88005f1b7670 0000000000000246 0000000041b58ab3
 Call Trace:
  [<ffffffff81635618>] dump_stack+0x63/0x8b
  [<ffffffff81313ee8>] kasan_report_error+0x528/0x560
  [<ffffffff81278f20>] ? filemap_map_pages+0x5f0/0x5f0
  [<ffffffff813144b8>] kasan_report+0x58/0x60
  [<ffffffffc12250dc>] ? zfs_getpage+0x14c/0x2d0 [zfs]
  [<ffffffff81312e4e>] __asan_load8+0x5e/0x70
  [<ffffffffc12250dc>] zfs_getpage+0x14c/0x2d0 [zfs]
  [<ffffffffc1252131>] zpl_readpage+0xd1/0x180 [zfs]

  [<ffffffff81353c3a>] SyS_execve+0x3a/0x50
  [<ffffffff810058ef>] do_syscall_64+0xef/0x180
  [<ffffffff81d0ee25>] entry_SYSCALL64_slow_path+0x25/0x25
 Memory state around the buggy address:
  ffff88005f1b7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff88005f1b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 >ffff88005f1b7600: 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 f4
                                                                 ^
  ffff88005f1b7680: f4 f4 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
  ffff88005f1b7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ==================================================================

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4705
Issue #4708
2016-05-31 16:01:27 -07:00
GeLiXin
b7faa7aabd Fix self-healing IO prior to dsl_pool_init() completion
Async writes triggered by a self-healing IO may be issued before the
pool finishes the process of initialization.  This results in a NULL
dereference of `spa->spa_dsl_pool` in vdev_queue_max_async_writes().

George Wilson recommended addressing this issue by initializing the
passed `dsl_pool_t **` prior to dmu_objset_open_impl().  Since the
caller is passing the `spa->spa_dsl_pool` this has the effect of
ensuring it's initialized.

However, since this depends on the caller knowing they must pass
the `spa->spa_dsl_pool` an additional NULL check was added to
vdev_queue_max_async_writes().  This guards against any future
restructuring of the code which might result in dsl_pool_init()
being called differently.

Signed-off-by: GeLiXin <47034221@qq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4652
2016-05-27 14:11:25 -07:00
Tony Hutter
26ef0cc7db OpenZFS 6531 - Provide mechanism to artificially limit disk performance
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6531
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/97e8130

Porting notes:
- Added new IO delay tracepoints, and moved common ZIO tracepoint macros
  to a new trace_common.h file.
- Used zio_delay_taskq() in place of OpenZFS's timeout_generic() function.
- Updated zinject man page
- Updated zpool_scrub test files
2016-05-26 10:11:51 -07:00
Tony Hutter
7e945072d1 Add request size histograms (-r) to zpool iostat, minor man page fix
Add -r option to "zpool iostat" to print request size histograms for the leaf
ZIOs. This includes histograms of individual ZIOs ("ind") and aggregate ZIOs
("agg"). These stats can be useful for seeing how well the ZFS IO aggregator
is working.

$ zpool iostat -r
mypool        sync_read    sync_write    async_read    async_write      scrub
req_size      ind    agg    ind    agg    ind    agg    ind    agg    ind    agg
----------  -----  -----  -----  -----  -----  -----  -----  -----  -----  -----
512             0      0      0      0      0      0    530      0      0      0
1K              0      0    260      0      0      0    116    246      0      0
2K              0      0      0      0      0      0      0    431      0      0
4K              0      0      0      0      0      0      3    107      0      0
8K             15      0     35      0      0      0      0      6      0      0
16K             0      0      0      0      0      0      0     39      0      0
32K             0      0      0      0      0      0      0      0      0      0
64K            20      0     40      0      0      0      0      0      0      0
128K            0      0     20      0      0      0      0      0      0      0
256K            0      0      0      0      0      0      0      0      0      0
512K            0      0      0      0      0      0      0      0      0      0
1M              0      0      0      0      0      0      0      0      0      0
2M              0      0      0      0      0      0      0      0      0      0
4M              0      0      0      0      0      0    155     19      0      0
8M              0      0      0      0      0      0      0    811      0      0
16M             0      0      0      0      0      0      0     68      0      0
--------------------------------------------------------------------------------

Also rename the stray "-G" in the man page to be "-w" for latency histograms.

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #4659
2016-05-25 15:49:35 -07:00
Chunwei Chen
4442f60d8e Fix arc_prune_task use-after-free
arc_prune_task uses a refcount to protect arc_prune_t, but it doesn't prevent
the underlying zsb from disappearing if there's a concurrent umount. We fix
this by force the caller of arc_remove_prune_callback to wait for
arc_prune_taskq to finish.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4687
Closes #4690
2016-05-25 14:11:53 -07:00
Chunwei Chen
cbecb4fb22 Skip ctldir znode in zfs_rezget to fix snapdir issues
Skip ctldir in zfs_rezget, otherwise they will always get invalidated. This
will cause funny behaviour for the mounted snapdirs. Especially for
Linux >= 3.18, d_invalidate will detach the mountpoint and prevent anyone
automount it again as long as someone is still using the detached mount.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4514
Closes #4661
Closes #4672
2016-05-23 11:06:56 -07:00
Chunwei Chen
9baaa7deae Linux 4.7 compat: use iterate_shared for concurrent readdir
Register iterate_shared if it exists so the kernel will used shared
lock and allowing concurrent readdir.

Also, use shared lock when doing llseek with SEEK_DATA or SEEK_HOLE
to allow concurrent seeking.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4664
Closes #4665
2016-05-20 11:09:16 -07:00
Chunwei Chen
68e8f59afb Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4665
2016-05-20 11:08:55 -07:00
Nikolay Borisov
278f223668 Kill znode->z_gen field
This field is a duplicate of the inode->i_generation, so just
kill it.

Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4538
Closes #4654
2016-05-19 13:06:14 -07:00
Brian Behlendorf
ada8258141 Revert "zhack: Add 'feature disable' command"
This reverts commit 8302528617 and
ebecfcd699 which broke the build.
While these patches do apply cleanly and passed previous test
runs they need to be updated to account for the changes made in
commit 241b541574.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3878
2016-05-17 11:52:07 -07:00
Marcel Huber
2587cd8f93 Fixes subtle bug in zio_handle_io_delay()
Fixed bug introduced in commit #c35b1882.  Hinted by gcc:

zio_inject.c: In function ‘zio_handle_io_delay’:
zio_inject.c:382:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
   if (handler->zi_record.zi_freq != 0 &&
      ^~
      zio_inject.c:384:4: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
          continue;
	      ^~~~~~~~

Signed-off-by: Marcel Huber <marcelhuberfoo@gmail.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4632
2016-05-17 11:03:11 -07:00
Brian Behlendorf
8302528617 zhack: Add 'feature disable' command
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3878
2016-05-17 11:00:21 -07:00
Chunwei Chen
d88895a069 Remove dummy znode from zvol_state
struct zvol_state contains a dummy znode, which is around 1KB on x64,
only for zfs_range_lock. But in reality, other than z_range_lock and
z_range_avl, zfs_range_lock only need znode on regular file, which
means we add 1KB on a structure and gain nothing.

In this patch, we remove the dummy znode for zvol_state. In order to
do that, we also need to refactor zfs_range_lock a bit. We move
z_range_lock and z_range_avl pair out of znode_t to form zfs_rlock_t.
This new struct replaces znode_t as the main handle inside the range
lock functions.

We also add pointers to z_size, z_blksz, and z_max_blksz so range lock
code doesn't depend on znode_t.  This allows non-ZPL consumers like
Lustre to use the range locks with their equivalent znode_t structure.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4510
2016-05-17 10:29:02 -07:00
Chunwei Chen
a9bb2b6827 Use cv_timedwait_sig_hires in arc_reclaim_thread
The was originally using interruptible cv_timedwait_sig, but was changed
to uninterruptible cv_timedwait_hires in ae6d0c6. Use _sig_hires instead
to allow interruptible sleep.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4633
Closes #4634
2016-05-12 14:56:47 -07:00
Dan McDonald
8adb798aa5 OpenZFS 6093 - zfsctl_shares_lookup
6093 zfsctl_shares_lookup should only VN_RELE() on zfs_zget() success

Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6093
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0f92170
Closes #4630

This function was always implemented slightly differently under Linux
and therefore never suffered from this issue.  The patch has been
updated and applied as cleanup in order to minimize differences with
the upstream OpenZFS code.
2016-05-12 13:39:06 -07:00
Brian Behlendorf
c15706490e Revert "Kill znode->z_gen field"
This reverts commit 4cd77889b6.  The
i_generation field in the inode is 32-bit and the SA code expects
64-bit fixed values.  Revert this optimization for now until
this is cleanly addressed.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4538
2016-05-12 13:36:22 -07:00
Tony Hutter
193a37cb24 Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues
Update the zfs module to collect statistics on average latencies, queue sizes,
and keep an internal histogram of all IO latencies.  Along with this, update
"zpool iostat" with some new options to print out the stats:

-l: Include average IO latencies stats:

 total_wait     disk_wait    syncq_wait    asyncq_wait  scrub
 read  write   read  write   read  write   read  write   wait
-----  -----  -----  -----  -----  -----  -----  -----  -----
    -   41ms      -    2ms      -   46ms      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -      -      -      -      -      -      -      -      -
    -   49ms      -    2ms      -   47ms      -      -      -
    -      -      -      -      -      -      -      -      -
    -    2ms      -    1ms      -      -      -    1ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  2ms    1ms    2ms  412us   26us   25us      -    5ms      -
    -    1ms      -  413us      -   25us      -    5ms      -
    -    1ms      -  460us      -   29us      -    5ms      -
196us    1ms  196us  370us    7us   23us      -    5ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----

-w: Print out latency histograms:

sdb           total           disk         sync_queue      async_queue
latency    read   write    read   write    read   write    read   write   scrub
-------  ------  ------  ------  ------  ------  ------  ------  ------  ------
1ns           0       0       0       0       0       0       0       0       0
...
33us          0       0       0       0       0       0       0       0       0
66us          0       0     107    2486       2     788      12      12       0
131us         2     797     359    4499      10     558     184     184       6
262us        22     801     264    1563      10     286     287     287      24
524us        87     575      71   52086      15    1063     136     136      92
1ms         152    1190       5   41292       4    1693     252     252     141
2ms         245    2018       0   50007       0    2322     371     371     220
4ms         189    7455      22  162957       0    3912    6726    6726     199
8ms         108    9461       0  102320       0    5775    2526    2526      86
17ms         23   11287       0   37142       0    8043    1813    1813      19
34ms          0   14725       0   24015       0   11732    3071    3071       0
67ms          0   23597       0    7914       0   18113    5025    5025       0
134ms         0   33798       0     254       0   25755    7326    7326       0
268ms         0   51780       0      12       0   41593   10002   10002       0
537ms         0   77808       0       0       0   64255   13120   13120       0
1s            0  105281       0       0       0   83805   20841   20841       0
2s            0   88248       0       0       0   73772   14006   14006       0
4s            0   47266       0       0       0   29783   17176   17176       0
9s            0   10460       0       0       0    4130    6295    6295       0
17s           0       0       0       0       0       0       0       0       0
34s           0       0       0       0       0       0       0       0       0
69s           0       0       0       0       0       0       0       0       0
137s          0       0       0       0       0       0       0       0       0
-------------------------------------------------------------------------------

-h: Help

-H: Scripted mode. Do not display headers, and separate fields by a single
    tab instead of arbitrary space.

-q: Include current number of entries in sync & async read/write queues,
    and scrub queue:

 syncq_read    syncq_write   asyncq_read  asyncq_write   scrubq_read
 pend  activ   pend  activ   pend  activ   pend  activ   pend  activ
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0    227    394      0     19      0      0      0      0
    0      0    227    394      0     19      0      0      0      0
    0      0    108     98      0     19      0      0      0      0
    0      0     19     98      0      0      0      0      0      0
    0      0     78     98      0      0      0      0      0      0
    0      0     19     88      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----

-p: Display numbers in parseable (exact) values.

Also, update iostat syntax to allow the user to specify specific vdevs
to show statistics for.  The three options for choosing pools/vdevs are:

Display a list of pools:
    zpool iostat ... [pool ...]

Display a list of vdevs from a specific pool:
    zpool iostat ... [pool vdev ...]

Display a list of vdevs from any pools:
    zpool iostat ... [vdev ...]

Lastly, allow zpool command "interval" value to be floating point:
    zpool iostat -v 0.5

Signed-off-by: Tony Hutter <hutter2@llnl.gov
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4433
2016-05-12 12:36:32 -07:00
Nikolay Borisov
04bc461062 Reduce stack usage of dmu_recv_stream function
The receive_writer_arg and receive_arg structures become large
when ZFS is compiled with debugging enabled. This results in
gcc throwing an error about excessive stack usage:

  module/zfs/dmu_send.c: In function ‘dmu_recv_stream’:
  module/zfs/dmu_send.c:2502:1: error: the frame size of 1256 bytes is
  larger than 1024 bytes [-Werror=frame-larger-than=]

Fix this by allocating those functions on the heap, rather than
on the stack.

With patch:    dmu_send.c:2350:1:dmu_recv_stream 240 static
Without patch: dmu_send.c:2350:1:dmu_recv_stream 1336 static

Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4620
2016-05-11 12:14:24 -07:00
Chunwei Chen
32c8c946ea OpenZFS 6842 - Fix empty xattr dir causing lockup
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Denys Rtveliashvili <denys@rtveliashvili.name>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

An initial version of this patch was applied in commit 29572cc and
subsequently refined upstream.  Since the implementations do not
conflict with each other both are left applied for now.

OpenZFS-issue: https://www.illumos.org/issues/6842
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/02525cd
Closes #4615
2016-05-10 10:38:21 -07:00
Brian Behlendorf
33cf67cd9a Wrap vdev_count_verify_zaps() with ZFS_DEBUG
Commit e0ab3ab introduced two blocks of code which are only needed
when debugging is enabled.  These blocks should be wrapped with
ZFS_DEBUG for clarity and to prevent unused variable warnings in
a production build.

Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4515
2016-05-06 18:14:03 -07:00
David Quigley
ae6d0c601e OpenZFS 6672 - arc_reclaim_thread() should use gethrtime()
6672 arc_reclaim_thread() should use gethrtime() instead of ddi_get_lbolt()

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: David Quigley <dpquigl@davequigley.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6672
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/571be5c
Closes #4600
2016-05-06 09:35:52 -07:00