1. Add global varible _libkse_debug, debugger uses the varible to identify
libpthread. when the varible is written to non-zero by debugger, libpthread
will take some special action at context switch time, it will check
TMDF_DOTRUNUSER flags, if a thread has the flags set by debugger, it won't
be scheduled, when a thread leaves KSE critical region, thread checks
the flag, if it was set, the thread relinquish CPU.
2. Add pq_first_debug to select a thread allowd to run by debugger.
3. Some names prefixed with _thr are renamed to _thread prefix.
which is allowed to run by debugger.
idea is that we perform multibyte->wide character conversion while parsing
and compiling, then convert byte sequences to wide characters when they're
needed for comparison and stepping through the string during execution.
As with tr(1), the main complication is to efficiently represent sets of
characters in bracket expressions. The old bitmap representation is replaced
by a bitmap for the first 256 characters combined with a vector of individual
wide characters, a vector of character ranges (for [A-Z] etc.), and a vector
of character classes (for [[:alpha:]] etc.).
One other point of interest is that although the Boyer-Moore algorithm had
to be disabled in the general multibyte case, it is still enabled for UTF-8
because of its self-synchronizing nature. This greatly speeds up matching
by reducing the number of multibyte conversions that need to be done.
consequently the exponent is only 11 bits. Testing whether the
exponent equals 32767 in that case only effects to compiler warnings
and thus build breakage.
isnormal() the hard way, rather than relying on fpclassify(). This is
a lose in the sense that we need a total of 12 functions, but it is
necessary for binary compatibility because we have never bumped libm's
major version number. In particular, isinf(), isnan(), and isnanf()
were BSD libc functions before they were C99 macros, so we can't
reimplement them in terms of fpclassify() without adding a dependency
on libc.so.5. I have tried to arrange things so that programs that
could be compiled in FreeBSD 4.X will generate the same external
references when compiled in 5.X. At the same time, the new macros
should remain C99-compliant.
The isinf() and isnan() functions remain in libc for historical
reasons; however, I have moved the functions that implement the macros
isfinite() and isnormal() to libm where they belong. Moreover,
half a dozen MD versions of isinf() and isnan() have been replaced
with MI versions that work equally well.
Prodded by: kris
builtins are available: HUGE_VAL, HUGE_VALF, HUGE_VALL, INFINITY,
and NAN. These macros now expand to floating-point constant
expressions rather than external references, as required by C99.
Other compilers will retain the historical behavior. Note that
it is not possible say, e.g.
#define HUGE_VAL 1.0e9999
because the above may result in diagnostics at translation time
and spurious exceptions at runtime. Hence the need for compiler
support for these features.
Also use builtins to implement the macros isgreater(),
isgreaterequal(), isless(), islessequal(), islessgreater(),
and isunordered() when such builtins are available.
Although the old macros are correct, the builtin versions
are much faster, and they avoid double-expansion problems.
class. This is necessary in order to implement tr(1) efficiently in
multibyte locales, since the brute force method of finding all characters
in a class is infeasible with a 32-bit (or wider) wchar_t.
code. <whew!> This version handles all of the following edge cases:
* Restoring explicit dirs with 000 permissions (star fails this test)
* Restore of implicit or explicit dirs when umask=777
(gtar and star both fail this test)
* Restoring dir paths containing "." and ".." components
This version initially creates all dirs with permission 700 (ignoring
umask), then does a post-extract "fixup" pass to set the correct
permissions (which may or may not depend on umask, depending on the
restore flags and whether it's an explicit or implicit dir).
Permissions are restored depth-first so that permissions within
non-writable dirs can be correctly restored. (The depth-sorting does
correctly account for dirs with ".." components.)
under the RETURN VALUES section so it is consistent with others.
Cleanup the return value text for getenv(3) a little while I am here.
PR: docs/58033
MFC after: 3 days
{ip,udp,tcp} header and return a void * pointing to the payload (i.e. the
first byte past the end of the header and any required padding). Use them
consistently throughout libalias to a) reduce code duplication, b) improve
code legibility, c) get rid of a bunch of alignment warnings.
a short pointer. The previous implementation seems to be in a gray zone
of the C standard, and GCC generates incorrect code for it at -O2 or
higher on some platforms.
These trivial implementations are about 25 times slower than
rint{,f}() on x86 due to the FP environment save/restore.
They should eventually be redone in terms of fegetround() and
bit fiddling.
named link, foo_link or link_foo to lnk, foo_lnk or lnk_foo, fixing
signed / unsigned comparisons, and shoving unused function arguments
under the carpet.
I was hoping WARNS?=6 might reveal more serious problems, and perhaps
the source of the -O2 breakage, but found no smoking gun.
pointer to the corresponding struct thread to the thread ID (lwpid_t)
assigned to that thread. The primary reason for this change is that
libthr now internally uses the same ID as the debugger and the kernel
when referencing to a kernel thread. This allows us to implement the
support for debugging without additional translations and/or mappings.
To preserve the ABI, the 1:1 threading syscalls, including the umtx
locking API have not been changed to work on a lwpid_t. Instead the
1:1 threading syscalls operate on long and the umtx locking API has
not been changed except for the contested bit. Previously this was
the least significant bit. Now it's the most significant bit. Since
the contested bit should not be tested by userland, this change is
not expected to be visible. Just to be sure, UMTX_CONTESTED has been
removed from <sys/umtx.h>.
Reviewed by: mtm@
ABI preservation tested on: i386, ia64
applied to their permissions. Just calculate the
default dir mode once and use it consistently, rather than
trying to remember to calculate it everywhere it's needed.
* Rename some variables/functions/etc to try to make things clearer.
* Add separate flags to control fflag/acl restore
* Collect metadata restore into a single function for clarity
* Propagate errors in metadata restore back out to the client
* Fix some places where errors were being returned when they
shouldn't and vice-versa
* Modes are now always restored; ARCHIVE_EXTRACT_PERM just controls
whether or not umask is obeyed.
* Restore suid/sgid bits only if user/group matches archive
* Cache the last stat results to try to reduce the number of stat calls
archive_entry.
Update the Makefile MLINKS and manpage to bring it up-to-date with
the current status of archive_entry. At least the manpage actually
lists all of the functions now, even if it doesn't really yet explain
them all.
Mostly, these were being used correctly even though a lot of
variables and function names were mis-named.
In the process, I found and fixed a couple of latent bugs and
added a guard against adding an archive to itself.
a/././b/../b/../c/./../d/e/f now work correctly. And yes, a/b and a/c
both get created in this example; if you want, you can create an
entire dir heirarchy from a tar archive with only one entry.
More tweaks to umask support: umasks are now obeyed for all objects,
not just directories; the umask used is now the one in effect at the
corresponding call to archive_read_extract(), so clients that want to
tinker with umask during extract should get the expected behavior.
a fork, make sure that the current thread isn't detached and freed. As
a consequence the thread should be inserted into the head of the
active list only once (in the beginning).
umask in effect when the archive is closed
* Correct a typo that broke implicit dir creation for non-directories.
Thanks to: Garret A Wollman for pointing out my umask oversight
read_extract_dir (which creates directories in the archive). This
brings a number of advantages:
* FINALLY fix the problems creating dirs ending in "/." <sigh>
* Missing parent dirs now get created securely, just like explicit dirs.
(Created 0700 initially, then edited to 0755 at end of extraction.)
* Eliminate some duplicate code and some weird special cases.
While I'm cleaning, inline the regular-file creation code as well.
This change also pointed out one API deficiency: the
archive_read_data_into_XXX functions were originally defined to return
the total bytes read. This is, of course, ambiguous when dealing with
non-contiguous files. Change it to just return a status value.
with ``__'' to avoid polluting the namespace. This doesn't change the
documented rune interface at all, but breaks applications that accessed
_RuneLocale directly.
These routines are specified in C99 for the sake of
architectures where an int isn't big enough to represent
the full range of floating-point exponents. However,
even the 128-bit long double format has an exponent smaller
than 15 bits, so for all practical purposes, scalbln() and
scalblnf() are aliases for scalbn() and scalbnf(), respectively.
ki_childutime, and ki_emul. Also uses the timeradd() macro to correct
the calculation of ki_childtime. That will correct the value returned
when ki_childtime.tv_usec > 1,000,000.
This also implements a new KERN_PROC_GID option for kvm_getprocs().
It also implements the KERN_PROC_RGID and KERN_PROC_SESSION options
which were added to sys/kern/kern_proc.c revision 1.203.
PR: bin/65803 (a very tiny piece of the PR)
Submitted by: Cyrille Lefevre
kicking and screaming into the 1980's. This change converts most of
the markup from man(7) to mdoc(7) format, and I believe it removes or
updates everything that was flat out wrong. However, much work is
still needed to sanitize the markup, improve coverage, and reduce
overlap with other manpages. Some of the sections would better belong
in a philosophy_of_w_kahan.3 manpage, but they are informative and
remain at least as reminders of topics to cover.
Reviewed by: doc@, trhodes@
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
file already exists on disk.
Pointed out by: www/resin3 port (whose distfile contains the same file
twice with different permissions and relies on the permissions associated
with the second instance)
Thanks again to: Kris Kennaway
This is a corresponding change to bin/67994. I'll soon commit
bin/67994 into 4-STABLE. Actually, 5-CURRENT's getaddrinfo()
doesn't have the problem mentiond in bin/67994. However, it is
good to be in sync variable name with 4-STABLE and KAME.
PR: bin/67994
Submitted by: JINMEI Tatuya <jinmei@ocean.jinmei.org>
* Restore directories with 0700 permissions initially,
then use the fixup pass to correct the permissions
* Trim trailing "/" and "/." in mkdirpath()
Suggested by: Garrett Wollman
sigsuspend, thread shouldn't wait, in old code, it may be
ignored.
When a signal handler is invoked in sigsuspend, thread gets
two different signal masks, one is in thread structure,
sigprocmask() can retrieve it, another is in ucontext
which is a third parameter of signal handler, the former is
the result of sigsuspend mask ORed with sigaction's sa_mask
and current signal, the later is the mask in thread structure
before sigsuspend is called. After signal handler is called,
the mask in ucontext should be copied into thread structure,
and becomes CURRENT signal mask, then sigsuspend returns to
user code.
Reviewed by: deischen
Tested by: Sean McNeil <sean@mcneil.com>
on all inputs of the form x.75, where x is an even integer and
log2(x) = 21. A similar problem occurred when rounding upward.
The bug involves the following snippet copied from rint():
i>>=1;
if((i0&i)!=0) i0 = (i0&(~i))|((0x100000)>>j0);
The constant 0x100000 should be 0x200000. Apparently this case was
never tested.
It turns out that the bit manipulation is completely superfluous
anyway, so remove it. (It tries to simulate 90% of the rounding
process that the FPU does anyway.) Also, the special case of +-0 is
handled twice (in different ways), so remove the second instance.
Throw in some related simplifications from bde:
- Work around a bug where gcc fails to clip to float precision by
declaring two float variables as volatile. Previously, we
tricked gcc into generating correct code by declaring some
float constants as doubles.
- Remove additional superfluous bit manipulation.
- Minor reorganization.
- Include <sys/types.h> explicitly.
Note that some of the equivalent lines in rint() also appear to be
unnecessary, but I'll defer to the numerical analysts who wrote it,
since I can't test all 2^64 cases.
Discussed with: bde
permission), try to continue in FTS_DONTCHDIR mode. Of course this
won't work for long paths, but we can't descend more than one pathname
component beyond the directory anyway if we lack search permission.
Here is a transcript demonstrating the change, where oldls is ls(1)
linked with the old fts(3):
das@VARK:~> mkdir t && touch t/{a,b,c} && chmod u-x t
das@VARK:~> oldls t
a b c
das@VARK:~> oldls -l t
das@VARK:~> \ls t
a b c
das@VARK:~> \ls -l t
ls: a: Permission denied
ls: b: Permission denied
ls: c: Permission denied
I had forgotten about this patch until bde reminded me. He reports
using it without problems for over a year.
PR: 45723
writable. Affected callers include fwrite(), put?(), and *printf().
The issue of whether this is the right errno for funopened streams is
unresolved, but that's an obscure case, and some errno is better than
no errno.
Discussed with: bde, jkh
distinguish files from dirs (trailing '/' indicated a dir). Since
POSIX.1-1987, this convention is no longer necessary. However, there
are current tar programs that pretend to write POSIX-compliant
archives, yet store directories as "regular files", relying on this
old filename convention to save them. <sigh> So, move the check for
this old convention so it applies to all tar archives, not just those
identified as "old."
Pointed out by: Broken distfile for audio/faad port
it sees a truncated input the first time it gets called.
(In particular, files shorter than 512 bytes cannot be tar archives.)
This allows the top-level archive_read_next_header code to
generate a proper error message for unrecognized file types.
Pointed out by: numerous ports that expect tar to extract non-tar files ;-(
Thanks to: Kris Kennaway
It does not appear to be possible to cross-build arm from i386 at the
moment, and I have no ARM hardware anyway. Thus, I'm sure there are
bugs. I will gladly fix these when the arm port is more mature.
Reviewed by: standards@
features appear to work, subject to the caveat that you tell gcc you
want standard rather than recklessly fast behavior
(-mieee-with-inexact -mfp-rounding-mode=d).
The non-standard feature of delivering a SIGFPE when an application
raises an unmasked exception does not work, presumably due to a kernel
bug. This isn't so bad given that floating-point exceptions on the
Alpha architecture are not precise, so making them useful in userland
requires a significant amount of wizardry.
Reviewed by: standards@
version called the higher-level archive_read_data and
archive_read_data_skip functions, which screwed up state management of
those functions. This bit of mis-design has existed for a long time,
but became a serious issue with the recent changes to the
archive_read_data APIs, which added more internal state to the
high-level archive_read_data function. Most common symptom was a
failure to correctly read 'L' entries (long filename) from GNU-style
archives, causing the message ": Can't open: No such file or
directory" with an empty filename.
Pointed out by: Numerous port build failures
Thanks to: Kris Kennaway
that as end-of-archive. Otherwise, a short read at this point
generates an error. This accomodates broken tar writers (such as the
one apparently in use at AT&T Labs) that don't even write a single
end-of-archive block.
Note that both star and pdtar behave this way as well.
In contrast, gtar doesn't complain in either case, and as a
result, will generate no warning for a lot of trashed archives.
Pointed out by: shells/ksh93 port (Thanks to Kris Kennaway)
push extract data down into archive_read_extract.c and out
of the library-global archive_private.h; push dir-specific
mode/time fixup down into dir restore function; now that the
fixup list is file-local, I can use somewhat more natural
naming.
Oh, yeah, update a bunch of comments to match current reality.
reflect src/libexec/rtld-elf/rtld.c rev. 1.68 - the globally-loaded
objects (RTLD_GLOBAL) are searched before the local object's DAG's.
PR: 62770
Submitted by: Kimura Fuyuki <fuyuki@nigredo.org>
We approximate pi with more than float precision using pi_hi+pi_lo in
the usual way (pi_hi is actually spelled pi in the source code), and
expect (float)0.5*pi_lo to give the low part of the corresponding
approximation for pi/2. However, the high part for pi/2 (pi_o_2) is
rounded to nearest, which happens to round up, while the high part for
pi was rounded down. Thus pi_o_2+(float)0.5*pi (in infinite precision)
was a very bad approximation for pi/2 -- the low term has the wrong
sign and increases the error drom less than half an ULP to a full ULP.
This fix rounds up instead of down for pi_hi. Consistently rounding
down instead of up should work, and is the method used in e_acosf.c
and e_asinf.c. The reason for the difference is that we sometimes
want to return precisely pi/2 in e_atan2f.c, so it is convenient to
have a correctly rounded (to nearest) value for pi/2 in a variable.
a_acosf.c and e_asinf.c also differ in directly approximating pi/2
instead pi; they multiply by 2.0 instead of dividing by 0.5 to convert
the approximation.
These complications are not directly visible in the double precision
versions because rounding to nearest happens to round down.
* New read_data_block is both sparse-file aware and uses zero-copy semantics
* Push read_data_block down into specific formats (opens door to
various encoded entry bodies, such as zip or gtar -S)
* Reimplement read_data, read_data_skip, read_data_into_fd in terms
of new read_data_block.
* Update documentation
It's unfortunate that I couldn't just call the new interface
archive_read_data, but didn't want to upset the API that much.
and not tanf() because float type can't represent numbers large enough
to trigger the problem. However, there seems to be a precedent that
the float versions of the fdlibm routines should mirror their double
counterparts.
Also update to the FDLIBM 5.3 license.
Obtained from: FDLIBM
Reviewed by: exhaustive comparison
where the exponent is an odd integer and the base is negative).
Obtained from: fdlibm-5.3
Sun finally released a new version of fdlibm just a coupe of weeks
ago. It only fixes 3 bugs (this one, another one in pow() that we
already have (rev.1.9), and one in tan(). I've learned too much about
powf() lately, so this fix was easy to merge. The patch is not verbatim,
because our base version has many differences for portability and I
didn't like global renaming of an unrelated variable to keep it separate
from the sign variable. This patch uses a new variable named sn for
the sign.
[t=p_l+p_h High]. We multiply t by lg2_h, and want the result to be
exact. For the bogus float case of the high-low decomposition trick,
we normally discard the lowest 12 bits of the fraction for the high
part, keeping 12 bits of precision. That was used for t here, but it
doesnt't work because for some reason we only discard the lowest 9
bits in the fraction for lg2_h. Discard another 3 bits of the fraction
for t to compensate.
This bug gave wrong results like:
powf(0.9999999, -2.9999995) = 1.0000002 (should be 1.0000001)
hex values: 3F7FFFFF C03FFFFE 3F800002 3F800001
As explained in the log for the previous commit, the bug is normally
masked by doing float calculations in extra precision on i386's, but
is easily detected by ucbtest on systems that don't have accidental
extra precision.
This completes fixing all the bugs in powf() that were routinely found
by ucbtest.
(1) The bit for the 1.0 part of bp[k] was right shifted by 4. This seems
to have been caused by a typo in converting e_pow.c to e_powf.c.
(2) The lower 12 bits of ax+bp[k] were not discarded, so t_h was actually
plain ax+bp[k]. This seems to have been caused by a logic error in
the conversion.
These bugs gave wrong results like:
powf(-1.1, 101.0) = -15158.703 (should be -15158.707)
hex values: BF8CCCCD 42CA0000 C66CDAD0 C66CDAD4
Fixing (1) gives a result wrong in the opposite direction (hex C66CDAD8),
and fixing (2) gives the correct result.
ucbtest has been reporting this particular wrong result on i386 systems
with unpatched libraries for 9 years. I finally figured out the extent
of the bugs. On i386's they are normally hidden by extra precision.
We use the trick of representing floats as a sum of 2 floats (one much
smaller) to get extra precision in intermediate calculations without
explicitly using more than float precision. This trick is just a
pessimization when extra precision is available naturally (as it always
is when dealing with IEEE single precision, so the float precision part
of the library is mostly misimplemented). (1) and (2) break the trick
in different ways, except on i386's it turns out that the intermediate
calculations are done in enough precision to mask both the bugs and
the limited precision of the float variables (as far as ucbtest can
check).
ucbtest detects the bugs because it forces float precision, but this
is not a normal mode of operation so the bug normally has little effect
on i386's.
On systems that do float arithmetic in float precision, e.g., amd64's,
there is no accidental extra precision and the bugs just give wrong
results.
