The driver now ensures only one thread at a time is running in the API
functions (clock_gettime() and clock_settime()) by specifically requesting
ownership of the i2c bus without using IIC_RECURSIVE, then it does all IO
using IIC_RECURSIVE so that each individual IO operation doesn't try to
re-acquire the bus.
The other IO done by the driver happens at attach or intr_config_hooks time,
when there can't be multiple threads running with the same device instance.
So, the IIC_RECURSIVE flag can be safely ORed into the wait flags for all IO
done by the driver, because it's all either done in a single-threaded
environment, or protected within a block bounded by explict
iicbus_acquire_bus() and iicbus_release_bus() calls.
The recursive ownership support added in r321584 was unconditionally in
effect all the time -- whenever a given i2c slave device instance tried to
lock the i2c bus for exclusive use when it already owned the bus, the call
returned immediately without waiting. However, many i2c slave drivers use
bus ownership to enforce that only a single thread at a time can be using
the slave device. The recursive locking changes broke this use case.
Now there is a new flag, IIC_RECURSIVE, which can be mixed in with the
other flags passed to iicbus_acquire_bus() to allow drivers to indicate
when recursive locking is desired. Using the flag implies that the driver
is managing concurrent access to the device by different threads in some way.
This immediately fixes all existing i2c slave drivers except for the two
i2c RTC drivers which use the recursive locking feature; those will be
fixed in a followup commit.
- Simplify the description of -H to assume 1:1 threading.
- Drop 'process' from description of 'lwp' field and the corresponding
XO field name.
- Do add an expansion of LWP in the description of 'lwp' and 'nlwps'.
- Add 'tid' as an alias for the 'lwp' field.
Reviewed by: imp, kib (older version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14021
r260553 added a number of mangled C++ symbols to Version.map inside of
an existing `extern "C++"` block.
ld.bfd 2.17.50 treats `extern "C++"` permissively and will match both
mangled and demangled symbols against the strings in the version map
block. ld.lld interprets `extern "C++"` strictly, and matches only
demangled symbols.
I believe lld's behaviour is correct. Contemporary versions of ld.bfd
also behave as lld does, so move the mangled symbols out of the
`extern "C++"` block.
PR: 225128, 185663
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
utilities is done by calling gr_addgid() for each group to be
added (usually found by traversing /etc/group) then calling the
setgroups() system call after the group set has been created.
The gr_addgid() function (helpfully?) deduplicates the addition
of group members. So, if you call it to add a group member that
already exists, it is just dropped. Because group[0] is the
effective group-ID and is over-written when a setgid program
is run, The value in group[0] is usually duplicated so that
group value is not lost when a setgid program is run.
Historically this happened because the group value indicated
in the password file also appears in /etc/group (e.g., if you
are group staff in the password file, you will also appear in
the staff line in /etc/group). But, with the addition of the
deduplication, the attempt to add group staff was lost because
it already appeared in group[0]. So, the fix is to deduplicate
starting from group[1] which allows a duplicate of the entry in
group[0], but not in later entries.
There is some confusion about the setgroups system call because in
BSD it has (always) set the entire group including the egid group
(in group[0]). However, in Linux, it skips over group[0] and starts
setting from group[1]. See this comment from linux_setgroups:
/*
* cr_groups[0] holds egid. Setting the whole set from
* the supplied set will cause egid to be changed too.
* Keep cr_groups[0] unchanged to prevent that.
*/
To make it clear what the BSD setgroups system call does, I
added the following paragraph to the setgroups(2) manual page:
The first entry of the group array (gidset[0]) is used as the effective
group-ID for the process. This entry is over-written when a setgid
program is run. To avoid losing access to the privileges of the
gidset[0] entry, it should be duplicated later in the group array.
By convention, this happens because the group value indicated in the
password file also appears in /etc/group. The group value in the
password file is placed in gidset[0] and that value then gets added a
second time when the /etc/group file is scanned to create the group set.
Reported by: Paul McMath paulm at tetrardus.net
Reviewed by: kib
MFC after: 2 weeks
These files previously had a 3-clause license and 'THE REGENTS' text.
Switch to standard 2-clause text with kib's approval, and add the SPDX
tag.
Approved by: kib
This behavior also matches a Linux-ism by allowing fdt_overlays to specify
names of overlays without an extension, e.g. fdt-overlays="sunxi-h3-h5-emac"
If we fail to load the file given by a name in fdt_overlays, try again with
".dtbo" appended to it. This still allows overlays to lack .dtbo extension
if user prefers it and just adds a fallback cushion.
Future work could move this from a hard-coded ".dtbo" to a loader.conf(5)
configuration option.
Reviewed by: gonzo
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13968
Right now, we'll leak memory when we display a help topic because we
don't free t, s, d that we've just used when breaking out of the loop.
NB: coverity just reported t, but s and d also leak.
CID: 1007776
Always free dev and fstyp before strduping new values to assign to
them. Free them at the end of the loop. This keeps them from leaking
for mal-formed /etc/fstab lines.
CID: 1007777, 1007778, 1007779
Sponsored by: Netflix
/boot/overlays was recently added without belonging to a package. It's only
used by bootloaders at the moment, so add it to the 'runtime' package to get
added with ubldr and friends.
Fix distrib-dirs METALOG generation while we're here. History elsewhere
seems to indicate that bapt@ fixed this to pull in all attributes from
mtrees while generating the METALOG. This fix got clobbered somewhere later,
so restore it.
Reviewed by: bapt, gjb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13996
within the CHROOTDIR. If it does not exist, unset CHROOTBUILD_SKIP
to prevent build failures.
Requested by: swills
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
MSI/MSI-x interrupts are edge-triggered. If an interrupt
arrives when IRQ line is masked, it will be lost and will
never recover. Perform MSI_EOI always after unmask to give
a chance for PHB/XICS to send an interrupt again if MSI/MSI-x
pending bit is set in MSI/MSI-x BAR space.
Submitted by: Wojciech Macek <wma@semihalf.org>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Increment the route table generation count after modifying a
route. This signals back to TCP connections that they need to
update their L2 caches as the gateway for their route may have
changed. This is a heavier hammer than is needed, strictly
speaking, but route changes will be unlikely enough that the
performance effects of invalidating all connection route caches
should be negligible.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13990
Reviewed by: karels
Add a new macro to clear both the L3 and L2 route caches, to
hopefully prevent future instances where only the L3 cache was
cleared when both should have been.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13989
Reviewed by: karels
When the inpcb route cache is invalidated after a change to the
routing tables, we need to invalidate the LLE cache as well.
Previous to this change packets for the connection would continue
to use the old L2 information from the old L3 gateway, and the
packets for the connection would likely be blackholed.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13988
Reviewed by: karels
Commits r326203 and r326978 broke 64-bit booke kernels by introducing a 1MB
zero-pad between the ELF header and the start of the kernel. This didn't
cause a build failure, but caused kernels to need to be loaded into memory
1MB lower, which could easily break scripts expecting previous behavior.
This change matches the similar change made to AIM in r327358.
The man page is years out of date regarding errors. Our implementation _does_
allow unaligned addresses, and it _does_not_ check for negative lengths,
because the length is unsigned. It checks for overflow instead.
Update the tests accordingly.
Reviewed by: bcr
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D13826
In iflib, the device-specific init() function isn't supposed to edit
the struct ifnet driver flags. If it does, it'll cause an MPASS() assert
in iflib to fail.
PR: 225312
Reported by: bhughes@
Route messages are aligned to the host long type alignment, which
breaks 32bit.
Reported and tested by: lwhsu
Diagnosed by: Yuri Pankov <yuripv@icloud.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
kib points out that trying to re-use symbol versioning from libc is dirty
and wrong. The implementation in libregex is incompatible by design with the
implementation in libc. Using the symbol versions from libc can and likely
will cause confusions for linkers and bring unexpected behavior for
consumers that unwillingly (transitively) link against libregex.
Reported by: kib
These functions deal the same type of overflows we do with mallocarray(9).
Using our mallocarray will panic, which different from the previous
behavior (returning NULL), but neither behavior is more correct.
As a sidenote, drm_calloc_large() is not currently used at all.
Reviewed by: dumbbell
Differential Revision: https://reviews.freebsd.org/D13835
instead of frobbing the registers directly.
As a hack the bcm2835_pwm kmod presently ignores the 'status="disabled"'
in the RPI3 DTB, assuming that if you load the kld you probably
want the PWM to work.
illumos/illumos-gate@e9b7d6e7f7https://www.illumos.org/issues/8972:
'zfs holds -H' does not properly output content in scripted mode. It uses a
tab instead of two spaces, but it still pads column widths with spaces when
it should not.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Allan Jude <allanjude@freebsd.org>
illumos/illumos-gate@e9b7d6e7f7https://www.illumos.org/issues/8972:
'zfs holds -H' does not properly output content in scripted mode. It uses a
tab instead of two spaces, but it still pads column widths with spaces when
it should not.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Allan Jude <allanjude@freebsd.org>
illumos/illumos-gate@5cb8d943bchttps://www.illumos.org/issues/8835:
Sequential reads not aligned to block size are not detected by ZFS
prefetcher as sequential, killing prefetch and severely hurting
performance. It is caused by dmu_zfetch() in case of misaligned
sequential accesses being called with overlap of one block.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Allan Jude <allanjude@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alexander Motin <mav@FreeBSD.org>
illumos/illumos-gate@5cb8d943bchttps://www.illumos.org/issues/8835:
Sequential reads not aligned to block size are not detected by ZFS
prefetcher as sequential, killing prefetch and severely hurting
performance. It is caused by dmu_zfetch() in case of misaligned
sequential accesses being called with overlap of one block.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Allan Jude <allanjude@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alexander Motin <mav@FreeBSD.org>
illumos/illumos-gate@4ae5f5f06chttps://www.illumos.org/issues/8652:
Clang and GCC prefer to use unsigned ints to store enums. With Clang, that
causes tautological comparison warnings when comparing a zfs_prop_t or
zpool_prop_t variable to the macro ZPROP_INVAL. It's likely that error
handling code is being silently removed as a result.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alan Somers <asomers@gmail.com>
illumos/illumos-gate@4ae5f5f06chttps://www.illumos.org/issues/8652:
Clang and GCC prefer to use unsigned ints to store enums. With Clang, that
causes tautological comparison warnings when comparing a zfs_prop_t or
zpool_prop_t variable to the macro ZPROP_INVAL. It's likely that error
handling code is being silently removed as a result.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alan Somers <asomers@gmail.com>
8641 "zpool clear" and "zinject" don't work on "spare" or "replacing" vdevs
illumos/illumos-gate@2ba5f978a4https://www.illumos.org/issues/8641:
"zpool clear" and "zinject -d" can both operate on specific vdevs, either
leaf or interior. However, due to an oversight, neither works on a "spare"
or "replacing" vdev. For example:
sudo zpool create foo raidz1 c1t5000CCA000081D61d0 c1t5000CCA000186235d0 spare c
1t5000CCA000094115d0
sudo zpool replace foo c1t5000CCA000186235d0 c1t5000CCA000094115d0
$ zpool status foo pool: foo
state: ONLINE
scan: resilvered 81.5K in 0h0m with 0 errors on Fri Sep 8 10:53:03 2017
config:
NAME STATE READ WRITE CKSUM
foo ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
c1t5000CCA000081D61d0 ONLINE 0 0 0
spare-1 ONLINE 0 0 0
c1t5000CCA000186235d0 ONLINE 0 0 0
c1t5000CCA000094115d0 ONLINE 0 0 0
spares
c1t5000CCA000094115d0 INUSE currently in use
$ sudo zinject -d spare-1 -A degrade foo
cannot find device 'spare-1' in pool 'foo'
$ sudo zpool clear foo spare-1
cannot clear errors for spare-1: no such device in pool
Even though there was nothing to clear, those commands shouldn't have
reported an error. by contrast, trying to clear "raidz1-0" works just fine:
$ sudo zpool clear foo raidz1-0
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alan Somers <asomers@gmail.com>
illumos/illumos-gate@2ba5f978a4https://www.illumos.org/issues/8641:
"zpool clear" and "zinject -d" can both operate on specific vdevs, either
leaf or interior. However, due to an oversight, neither works on a "spare"
or "replacing" vdev. For example:
sudo zpool create foo raidz1 c1t5000CCA000081D61d0 c1t5000CCA000186235d0 spare c1t5000CCA000094115d0
sudo zpool replace foo c1t5000CCA000186235d0 c1t5000CCA000094115d0
$ zpool status foo pool: foo
state: ONLINE
scan: resilvered 81.5K in 0h0m with 0 errors on Fri Sep 8 10:53:03 2017
config:
NAME STATE READ WRITE CKSUM
foo ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
c1t5000CCA000081D61d0 ONLINE 0 0 0
spare-1 ONLINE 0 0 0
c1t5000CCA000186235d0 ONLINE 0 0 0
c1t5000CCA000094115d0 ONLINE 0 0 0
spares
c1t5000CCA000094115d0 INUSE currently in use
$ sudo zinject -d spare-1 -A degrade foo
cannot find device 'spare-1' in pool 'foo'
$ sudo zpool clear foo spare-1
cannot clear errors for spare-1: no such device in pool
Even though there was nothing to clear, those commands shouldn't have
reported an error. by contrast, trying to clear "raidz1-0" works just fine:
$ sudo zpool clear foo raidz1-0
