for the Lite2 fix for always returning EIO in dead_read().
Cleaned up the cdevswitch initializers for all tty drivers.
Removed explicit calls to ttsetwater() from all (tty) drivers. ttsetwater()
is now called centrally for opens, not just for parameter changes.
another specialized mbuf type in the process. Also clean up some
of the cruft surrounding IPFW, multicast routing, RSVP, and other
ill-explored corners.
They shouldn't be used there either. They should have gone away
about 3 years ago when the statically initialized devswitches went
away, but su.c unfortunately still frobs the cdevswitch in the old
way.
since (hardware) ttys have too low a bandwidth to benefit significantly
from large buffers. Use twice the old limit for the new-default case
and 8 times the old limit for the driver-specifies-watermark case.
Nothing uses these cases yet.
Removed related debugging code.
in a SMP system. Unexpected things could happen if each cpu
has a different ldt setting and one cpu tries to use value
of currentldt set by another cpu.
The fix is to move currentldt to the per-cpu area. It includes
patches I filed in PR i386/6219 which are also user ldt related.
PR: i386/7591, i386/6219
Submitted by: Luoqi Chen <luoqi@watermarkgroup.com>
Cast pointers to (vm_offset_t) instead of to (u_long) (as before) or to
(uintptr_t)(void *) (as would be more correct). Don't cast vm_offset_t's
to (u_long) just to do arithmetic on them.
mp_machdep.c:
Cast pointers to (uintptr_t) instead of to (u_long). Don't forget
to cast pointers to (void *) first or to recover from integral
possible integral promotions, although this is too much work for
machine-dependent code.
vm code generally avoids warnings for pointer vs long size mismatches
by using vm_offset_t to represent pointers; pmap.c often uses plain
`unsigned int' instead of vm_offset_t and didn't use u_long elsewhere,
but this style was messed up by code apparently imported from mp_machdep.c.
in ddb) which I broke by changing %8[l]x to %8p. Hacked the central
printf routine to not add an "0x" prefix for %p formats if the field
width is nonzero. The tables are still horribly misformatted on
64-bit machines.
Use %p instead of %8p to print pointers when the field width isn't
important.
DOS partition type 15 (Extended DOS, LBA) as a container for
DOS logical volumes, so the appropriate slices (e.g. sd1s5)
are not initialized.
PR: 7549
PR: 4120
Reviewed by: phk
Submitted by: Jim Mattson <jmattson@sonic.net>
managed to avoid corruption of this variable by luck (the compiler used a
memory read-modify-write instruction which wasn't interruptable) but other
architectures cannot.
With this change, I am now able to 'make buildworld' on the alpha (sfx: the
crowd goes wild...)
and DSO_NOLABELS flags prevent searching for slices and labels
respectively. Current drivers don't set these flags. When
DSO_NOLABELS is set, the in-core label for the whole disk is cloned
to create an in-core label for each slice. This gives the correct
result (a good in-core label for the compatibility slice) if
DSO_ONESLICE is set or only one slice is found, but usually gives
broken labels otherwise, so DSO_ONESLICE should be set if DSO_NOLABELS
is set.
protection checks. Using the partition-relative blkno in some
parts broke the write protection for partitions at unusual
offsets (only for partitions at offset 1 on i386's).
best place to set it, and the wd and wfd strategy routines don't
set it (for failed transfers) because they expect dscheck() to
initialize everything necessary. dscheck() has always set B_ERROR,
but this is not quite sufficient, because b_resid is used by physio()
to decide how much of a B_ERROR'ed i/o was done.
formats and args to match. Fixed old printf format errors (all related;
most were hidden by calling printf indirectly).
This change somehow avoids compiler bugs for 64-bit longs on i386's,
although it increases the number of 64-bit calculations.
timeslice of the exiting process was counted for both the exiting
process and the next process to run if the next process runs
immediately.
Broken in: mostly in kern_clock.c rev.1.70 (1998/05/28)
Callers only need to initialize d_secperunit now, but should
initialize d_type (to reduce the IDE/SCSI confusion), d_typename
(put the disk model in it) and geometry info (if it isn't completely
ficticious). Callers will soon need to initialize d_secsize.
normally only defined in opt_devfs.h, so testing it before including
anything is normally a no-op. Undef'ing DEVFS before including
opt_devfs.h is similarly useless. OTOH, DEVFS support for sliced
but not SLICEd (despite defined(SLICE)) devices is either harmless
(if there are no such devices, then nothing in this file is used)
or necessary (otherwise). It even seems to work for sliced cd
devices.
nearly so many casts here. Casting an pointer that was an integer
back to an integer just to compare it with -1 is bad, and casting
it back just to compare it with NULL is just wrong.
Access the entry address as a uintfptr_t, not as a long, and not
necessarily as what modload(8) passes (it takes a u_long from the
exec header and passes a u_int).
Fixed bitrot in K&R support (suword() now takes a long word).
Didn't fix corresponding bitrot in store.9 and fetch.9.
The correct types for the store and fetch families are problematic.
The `word' functions are unfortunately named and need to be split
to handle ints/longs/object pointers/function pointers. Storing
argv[] as longs is quite broken when longs are longer than pointers,
but usually works because it clobbers variables that will soon be
reinitialized.
Hopefully caddr_t is large enough to hold function pointers.
Cast object pointers to uintptr_t before casting them to u_long.
Types are wronger than usual for the PT_READ_U case. ptrace() can
only return ints, but longs are accessed.