- Build up phys_avail[] in a single loop, excluding memory used by
the loaded kernel.
- Fix an array indexing bug in the aforementioned phys_avail[]
initialization.[1]
- Remove some unneeded code copied from the arm64 implementation.
PR: 231515 [1]
Reviewed by: jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18464
Inline tests for PTE_* bits are easy to read and don't really require a
predicate function, and predicates which operate on a pt_entry_t are
inconvenient when working with L1 and L2 page table entries.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18461
This adds more detail and fixes some inaccuracies.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18463
Add a subroutine for updating satp, for use when updating the
active pmap. No functional change intended.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18462
Fix reporting of SS_ONSTACK in nested signal delivery when sigaltstack()
is used on some architectures.
Add a unit test for this. I tested the test by introducing the bug
on amd64. I did not test it on other architectures.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18347
On arm64 and riscv platforms, sendsig() failed to zero the signal
frame before copying it out to userspace. Zero it.
On arm, I believe all the contents of the frame were initialized,
so there was no disclosure. However, explicitly zero the whole frame
because that fact could inadvertently change in the future,
it's more clear to the reader, and I could be wrong in the first place.
MFC after: 2 days
Security: similar to FreeBSD-EN-18:12.mem and CVE-2018-17155
Sponsored by: Dell EMC Isilon
The RISC-V spec defines several performance counter CSRs such as: cycle,
time, instret, hpmcounter(3...31). They are defined to be 64-bits wide
on all RISC-V architectures. On RV64 and RV128 they can be read from a
single CSR. On RV32, additional CSRs (given the suffix "h") are present
which contain the upper 32 bits of these counters, and must be read as
well. (See section 2.8 in the User ISA Spec for full details.)
This change adds macros for reading these values safely on any RISC-V
ISA length. Obviously we aren't supporting anything other than RV64
at the moment, but this ensures we won't need to change how we read
these values if we ever do.
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17952
These architectures never shipped binaries with an rtld path of
/usr/libexec/ld-elf.so.1.
Reviewed by: markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17876
machine/vmparam.h already defines the SHAREDPAGE constant. This
change just enables it for ELF executables. The only use of the
shared page currently is to hold the signal trampoline.
Reviewed by: markj, kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17875
Replace a call to DELAY(1) with a new cpu_lock_delay() KPI. Currently
cpu_lock_delay() is defined to DELAY(1) on all platforms. However,
platforms with a DELAY() implementation that uses spin locks should
implement a custom cpu_lock_delay() doesn't use locks.
Reviewed by: kib
MFC after: 3 days
Rather than unconditionally setting PTE_D for all writeable kernel
mappings, set PTE_D for writable mappings of unmanaged pages (whether
user or kernel). This matches what amd64 does and also matches what
the RISC-V spec suggests (preset the A and D bits on mappings where
the OS doesn't care about the state).
Suggested by: alc
Reviewed by: alc, markj
Sponsored by: DARPA
Previously, RISC-V was enabling execute permissions in PTEs for any
readable page. Now, execute permissions are only enabled if they were
explicitly specified (e.g. via PROT_EXEC to mmap). The one exception
is that the initial kernel mapping in locore still maps all of the
kernel RWX.
While here, change the fault type passed to vm_fault and
pmap_fault_fixup to only include a single VM_PROT_* value representing
the faulting access to match other architectures rather than passing a
bitmask.
Reviewed by: markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17783
This assumes that an access according to the prot in 'flags' triggered
a fault and is going to be retried after the fault returns, so the two
flags are set preemptively to avoid refaulting on the retry.
While here, only bother setting PTE_D for kernel mappings in pmap_enter
for writable mappings.
Reviewed by: markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17782
This is just cosmetic.
A weirder issue is that the SBI doc claims the hart mask pointer should
be a physical address, not a virtual address. However, the implementation
in bbl seems to just dereference the address directly.
Reviewed by: markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17781
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.
MFC after: never
modify l3 pte after we loaded old value and before we stored new value.
o Preset A(accessed), D(dirty) bits for kernel mappings.
Reported by: kib
Reviewed by: markj
Discussed with: jhb
Sponsored by: DARPA, AFRL
All platforms except powerpc use the same values and powerpc shares a
majority of them.
Go ahead and declare AT_NOTELF, AT_UID, and AT_EUID in favor of the
unused AT_DCACHEBSIZE, AT_ICACHEBSIZE, and AT_UCACHEBSIZE for powerpc.
Reviewed by: jhb, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17397
(e.g. RocketChip, lowRISC and derivatives).
RISC-V page table entries support A (accessed) and D (dirty) bits. The
spec makes hardware support for these bits optional. Implementations that
do not manage these bits in hardware raise page faults for accesses to a
valid page without A set and writes to a writable page without D set.
Check for these types of faults when handling a page fault and fixup the
PTE without calling vm_fault if they occur.
Reviewed by: jhb, markj
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17424
(e.g. RocketChip, lowRISC and derivatives).
RISC-V page table entries support A (accessed) and D (dirty) bits. The
spec makes hardware support for these bits optional. Implementations that
do not manage these bits in hardware raise page faults for accesses to a
valid page without A set and writes to a writable page without D set.
Check for these types of faults when handling a page fault and fixup the
PTE without calling vm_fault if they occur.
Reviewed by: jhb, markj
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17424
This was missed in r339367 ("Various fixes for TLB management on RISC-V.").
This fixes operation on lowRISC.
Reviewed by: jhb
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17583
- Remove the arm64-specific cpu_*cache* and cpu_tlb_flush* functions.
Instead, add RISC-V specific inline functions in cpufunc.h for the
fence.i and sfence.vma instructions.
- Catch up to changes in the arm64 pmap and remove all the cpu_dcache_*
calls, pmap_is_current, pmap_l3_valid_cacheable, and PTE_NEXT bits from
pmap.
- Remove references to the unimplemented riscv_setttb().
- Remove unused cpu_nullop.
- Add a link to the SBI doc to sbi.h.
- Add support for a 4th argument in SBI calls. It's not documented but
it seems implied for the asid argument to SBI_REMOVE_SFENCE_VMA_ASID.
- Pass the arguments from sbi_remote_sfence*() to the SEE. BBL ignores
them so this is just cosmetic.
- Flush icaches on other CPUs when they resume from kdb in case the
debugger wrote any breakpoints while the CPUs were paused in the IPI_STOP
handler.
- Add SMP vs UP versions of pmap_invalidate_* similar to amd64. The
UP versions just use simple fences. The SMP versions use the
sbi_remove_sfence*() functions to perform TLB shootdowns. Since we
don't have a valid pm_active field in the riscv pmap, just IPI all
CPUs for all invalidations for now.
- Remove an extraneous TLB flush from the end of pmap_bootstrap().
- Don't do a TLB flush when writing new mappings in pmap_enter(), only if
modifying an existing mapping. Note that for COW faults a TLB flush is
only performed after explicitly clearing the old mapping as is done in
other pmaps.
- Sync the i-cache on all harts before updating the PTE for executable
mappings in pmap_enter and pmap_enter_quick. Previously the i-cache was
only sync'd after updating the PTE in pmap_enter.
- Use sbi_remote_fence() instead of smp_rendezvous in pmap_sync_icache().
Reviewed by: markj
Approved by: re (gjb, kib)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17414
Without this hardware raises an interrupt regardless of any
pending bits set.
This fixes operation on RocketChip and derivatives (e.g. lowRISC).
Approved by: re (kib)
Sponsored by: DARPA, AFRL
The only source of documentation for this device is verilog,
so driver is minimalistic.
Reviewed by: Dr Jonathan Kimmitt <jrrk2@cam.ac.uk>
Approved by: re (kib)
Sponsored by: DARPA, AFRL
This invokes "fence" on the hart performing the write followed by an IPI
to execute "fence.i" on all harts.
This is required to support userland debuggers setting breakpoints in
user processes.
Reviewed by: br (earlier version), markj
Approved by: re (gjb)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17139
- Explicitly load an empty initial state into FP registers when taking
the fault on the first FP instruction in a thread. Setting
SSTATE.FS to INITIAL is just a marker to let context switch restore
code know that it can load FP registers with zeroes instead of
memory loads. It does not imply that the hardware will reset all
registers to zero on first access. In addition, set the state to
CLEAN instead of INITIAL after the first FP instruction.
cpu_switch() doesn't do anything for INITIAL and only restores from
the pcb if the state is CLEAN. We could perhaps change cpu_switch
to call fpe_state_clear if the state was INITIAL and leave SSTATE.FS
set to INITIAL instead of CLEAN after the first FP instruction.
However, adding this complexity to cpu_switch() doesn't seem worth
the supposed gain.
- Only save the current FPU registers in fill_fpregs() if the request
is made to save the current thread's registers. Previously if a
debugger requested FP registers via ptrace() it was getting a copy
of the debugger's FP registers rather than the debugee's.
- Zero the entire FP register set structure returned for ptrace() if a
thread hasn't used FP registers rather than leaking garbage in the
fp_fcsr field.
- If a debugger writes FP registers via ptrace(), always mark the pcb
as having valid FP registers and set SSTATUS.FS_MASK to CLEAN so
that the registers will be restored when the debugged thread
resumes.
- Be more explicit about clearing the SSTATUS.FS field before setting
it to CLEAN on the first FP instruction trap.
Submitted by: br, markj
Approved by: re (rgrimes)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17141
relocation.
elf_relocaddr() has a hook to handle VIMAGE data addresses.
This fixes VIMAGE support for RISC-V when built as a module.
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
This is done by setting SUM (permit Supervisor User Memory access)
bit in sstatus register.
The functions we allow access for are routines in assembly that
explicitly handle crossing the user kernel boundary.
Approved by: re (kib)
Sponsored by: DARPA, AFRL
Exposing max_offset and min_offset defines in public headers is
causing clashes with variable names, for example when building QEMU.
Based on the submission by: royger
Reviewed by: alc, markj (previous version)
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 1 week
Approved by: re (marius)
Differential revision: https://reviews.freebsd.org/D16881
The boot-time ifunc resolver assumes that it only needs to apply
IRELATIVE relocations to PLT entries. With an upcoming optimization,
this assumption no longer holds, so add the support required to handle
PC-relative relocations targeting GNU_IFUNC symbols.
- Provide a custom symbol lookup routine that can be used in early boot.
The default lookup routine uses kobj, which is not functional at that
point.
- Apply all existing relocations during boot rather than filtering
IRELATIVE relocations.
- Ensure that we continue to apply ifunc relocations in a second pass
when loading a kernel module.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16749
became unused in FreeBSD 12.x as a side-effect of the NUMA-related
changes.)
Reviewed by: kib, markj
Discussed with: jeff, re@
Differential Revision: https://reviews.freebsd.org/D16825
- In configurations with a pseudo devices section, move 'device crypto'
into that section.
- Use a consistent comment. Note that other things common in kernel
configs such as GELI also require 'device crypto', not just IPSEC.
Reviewed by: rgrimes, cem, imp
Differential Revision: https://reviews.freebsd.org/D16775
This is the output of
$ cat opcodes opcodes-rvc-pseudo opcodes-rvc opcodes-custom |
./parse-opcodes -c
It is confirmed by author that the output of parse-opcodes is
in the public domain.
This will be required for DDB disassembler.
Discussed with: Andrew Waterman <waterman@eecs.berkeley.edu>
Obtained from: https://github.com/riscv/riscv-opcodes
Sponsored by: DARPA, AFRL
o Save and restore tp in cpu_switch().
o Restore tp in cpu_throw().
o Save tp in savectx().
This makes libthr tests happy. In particular fork_test:fork.
Sponsored by: DARPA, AFRL
register to determine if trap is from userspace.
Otherwise if we jump to kernel address from userspace, then
TRAPF_USERMODE failed to detect usermode and then do_ast
triggers a panic "ast in kernel mode".
Reviewed by: markj@
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16469
o The correct value for _JB_SIGMASK is 27.
o The storage size for double-precision floating
point register is 8 bytes.
Submitted by: "James Clarke" <jrtc4@cam.ac.uk>
Reviewed by: markj@
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16344
Doing so ensures that all threads sharing the pmap have a consistent
view of the mapping. This fixes the problem described in the commit
log message for r329254 without the overhead of an extra page fault
in the common case. (Now that all pmap_enter() implementations are
similarly modified, the workaround added in r329254 can be removed,
reducing the overhead of COW faults.)
With this change we can reuse the PV entry from the old mapping,
potentially avoiding a call to reclaim_pv_chunk(). Otherwise, there is
nothing preventing the old PV entry from being reclaimed. In rare
cases this could result in the PTE's page table page being freed,
leading to a use-after-free of the page when the updated PTE is written
following the allocation of the PV entry for the new mapping.
Reviewed by: br, markj
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16261
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
(defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)
- Allocate page from the correct domain for a given cpu.
- Don't initialize pc_domain to non-zero value if NUMA is not defined
There are some misconceptions surrounding this field. It is the
_VM_ NUMA domain and should only ever correspond to valid domain
values as understood by the VM.
The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.
Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15933
gcc found that the variabl "code", while being assigned a value, isn't
be used for anything.
Reviewed by: br
Differential Revision: https://reviews.freebsd.org/D16114
It looks like the intent was to allow ZSTD support to be
compiled into the kernel with options ZSTDIO. But it doesn't look
like that was ever implemented or I'm missing how to do it.
I did a cursory audit of kernel config files and made a decision to
enable ZSTDIO in riscv GENERIC and mips MALTA configurations. All other
kernel configurations already had this option in their kernel configs
but they didn't do anything useful as the feature was declared as
"standard" prior to this.
Reviewed by: cem allanjude
Differential Revision: https://reviews.freebsd.org/D16007
This fixes the race when first core sets up the pagetables, while
secondary cores do translating the address of __riscv_boot_ap.
This now allows us to smpboot in QEMU with 8 cores just fine.
Sponsored by: DARPA, AFRL
an IPI.
This does not work however yet in QEMU. As a temporary workaround set
software interrupt pending bit manually on a local core to ensure WFI
doesn't halt the hart.
This is required to smpboot in QEMU.
Sponsored by: DARPA, AFRL
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
Make vm_wait() take the vm_object argument which specifies the domain
set to wait for the min condition pass. If there is no object
associated with the wait, use curthread' policy domainset. The
mechanics of the wait in vm_wait() and vm_wait_domain() is supplied by
the new helper vm_wait_doms(), which directly takes the bitmask of the
domains to wait for passing min condition.
Eliminate pagedaemon_wait(). vm_domain_clear() handles the same
operations.
Eliminate VM_WAIT and VM_WAITPFAULT macros, the direct functions calls
are enough.
Eliminate several control state variables from vm_domain, unneeded
after the vm_wait() conversion.
Scetched and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D14384
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
We don't support older compilers. Most of the code in these files is
for pre-3.0 gcc, which is at least 15 years obsolete. Move to using
phk's sys/_stdargs.h for all these platforms.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14323
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
domains can be done by the _domain() API variants. UMA also supports a
first-touch policy via the NUMA zone flag.
The slab layer is now segregated by VM domains and is precise. It handles
iteration for round-robin directly. The per-cpu cache layer remains
a mix of domains according to where memory is allocated and freed. Well
behaved clients can achieve perfect locality with no performance penalty.
The direct domain allocation functions have to visit the slab layer and
so require per-zone locks which come at some expense.
Reviewed by: Attilio (a slightly older version)
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
They provide relaxed-ordered atomic access semantic. Due to the
FreeBSD memory model, the operations are syntaxical wrappers around
the volatile accesses. The volatile qualifier is used to ensure that
the access not optimized out and in turn depends on the volatile
semantic as implemented by supported compilers.
The motivation for adding the operation is to help people coming from
other systems or knowing the C11/C++ standards where atomics have
special type and require use of the special access operations. It is
still the case that FreeBSD requires plain load and stores of aligned
integer types to be atomic.
Suggested by: jhb
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13534
This variable should be pure MI except possibly for reading it in MD
dump routines. Its initialization was pure MD in 4.4BSD, but FreeBSD
changed this in r36441 in 1998. There were many imperfections in
r36441. This commit fixes only a small one, to simplify fixing the
others 1 arch at a time. (r47678 added support for
special/early/multiple message buffer initialization which I want in
a more general form, but this was too fragile to use because hacking
on the msgbufp global corrupted it, and was only used for 5 hours in
-current...)
Upon successful completion, the execve() system call invokes
exec_setregs() to initialize the registers of the initial thread of the
newly executed process. What is weird is that when execve() returns, it
still goes through the normal system call return path, clobbering the
registers with the system call's return value (td->td_retval).
Though this doesn't seem to be problematic for x86 most of the times (as
the value of eax/rax doesn't matter upon startup), this can be pretty
frustrating for architectures where function argument and return
registers overlap (e.g., ARM). On these systems, exec_setregs() also
needs to initialize td_retval.
Even worse are architectures where cpu_set_syscall_retval() sets
registers to values not derived from td_retval. On these architectures,
there is no way cpu_set_syscall_retval() can set registers to the way it
wants them to be upon the start of execution.
To get rid of this madness, let sys_execve() return EJUSTRETURN. This
will cause cpu_set_syscall_retval() to leave registers intact. This
makes process execution easier to understand. It also eliminates the
difference between execution of the initial process and successive ones.
The initial call to sys_execve() is not performed through a system call
context.
Reviewed by: kib, jhibbits
Differential Revision: https://reviews.freebsd.org/D13180
With this bug fix we don't need to invalidate all the entries.
o Remove a call to pmap_invalidate_all(). This was never called
as the anyvalid variable is never set.
Obtained from: arm64/pmap.c (r322797, r322800)
Sponsored by: DARPA, AFRL
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
- allocate value for new AT_HWCAP2 auxiliary vector on all platforms.
- expand 'struct sysentvec' by new 'u_long *sv_hwcap2', in exactly
same way as for AT_HWCAP.
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D12699
HEAD. Enable VIMAGE in GENERIC kernels and some others (where GENERIC does
not exist) on HEAD.
Disable building LINT-VIMAGE with VIMAGE being default.
This should give it a lot more exposure in the run-up to 12 to help
us evaluate whether to keep it on by default or not.
We are also hoping to get better performance testing.
The feature can be disabled using nooptions.
Requested by: many
Reviewed by: kristof, emaste, hiren
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12639
Exploit r288122 to address a cosmetic issue. Since PV chunk pages don't
belong to a vm object, they can't be paged out. Since they can't be paged
out, they are never enqueued in a paging queue. Nonetheless, passing
PQ_INACTIVE to vm_page_unwire() creates the appearance that these pages
are being enqueued in the inactive queue. As of r288122, we can avoid
this false impression by passing PQ_NONE.
MFC after: 1 week
A new 'u_long *sv_hwcap' field is added to 'struct sysentvec'. A
process ABI can set this field to point to a value holding a mask of
architecture-specific CPU feature flags. If an ABI does not wish to
supply AT_HWCAP to processes the field can be left as NULL.
The support code for AT_EHDRFLAGS was already present on all systems,
just the #define was not present. This is a step towards unifying the
AT_* constants across platforms.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12290
