yocalebo_gmail.com submitted a patch for mountd.c that
fixes the case where a username starts with a digit.
Without this patch, the username that starts with a
digit is misinterpreted as a numeric uid.
With this patch, any string that does not entirely
convert to a decimal number via strtoul() is considered
a user/group name.
Submitted by: yocalebo_gmail.com
Reviewed by: rmacklem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32993
The exports file format allows export to a network using an explicit
mask or prefix length (CIDR). It also allows a network with just
a dotted address, in which case the historical mask was used.
Deprecate this usage, and warn when it is used. Document that this
is deprecated.
MFC after: 1 month
Reviewed by: rmacklem, bcr, #manpages
Differential Revision: https://reviews.freebsd.org/D32713
Daniel reported that NFSv4 mounts were not working despite having
set "nfsv4_server_enable=YES" in /etc/rc.conf. Mountd was logging a
message that there was no /etc/exports file.
He noted that creating a /etc/exports file with a "V4:" line in it
was needed make NFSv4 mounts work.
At least one "V4:" line in one of the exports(5) file(s) is needed to
make NFSv4 mounts work. This patch fixes mountd.c so that it logs a
message indicting that there is no "V4:" line in any exports(5)
file when NFSv4 mounts are enabled.
To avoid this message being generated erroneously, /etc/rc.d/mountd
is updated to make sure vfs.nfsd.server_max_nfsvers is properly set
before mountd(8) is started.
Reported by: debdrup
PR: 253901
MFC after: 2 weeks
NFS over TLS uses three new export options, added by r364979.
This patch updates the exports.5 man page for these new options.
Once assigned by IETF, "NNNN" will be replaced with the RFC number.
This is a content change.
Reviewed by: gbe
Differential Revision: https://review.freebsd.org/D26241
rpcbind is now considered a security risk for some sites.
Since an NFSv4 only NFS server does not need rpcbind,
it makes sense to have an option that implements this.
This patch adds a "-R" option that disables the Mount
protocol (not used by NFSv4) and does not register
with rpcbind.
Changes are required to /etc/rc.d/mountd and /etc/rc.d/nfsd.
Those will be in a separate commit.
Reviewed by: freqlabs, asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26746
r362163 upgraded mountd so that it could handle MAX_NGROUPS
groups for the anonymous user credentials (the ones provided by
-maproot and -mapall exports options).
The problem is that this resulted in every export structure growing by
about 4Kbytes, because the cr_groups field went from 16->MAX_NGROUPS.
This patch fixes this by only including a small 32 element cr_groups in the
structure and then malloc()'ng cr_groups when a larger one is needed.
The value of SMALLNGROUPS is arbitrarily set to 32, assuming most users
used by -maproot or -mapall will be in <= 32 groups.
Reviewed by: kib, freqlabs
Differential Revision: https://reviews.freebsd.org/D26521
- no blank before trailing delimiter
- whitespace at end of input line
- sections out of conventional order
- normalizing date format
- AUTHORS section without An macro
Three new export flags are added to mountd that will restrict exported
file system mounts to use TLS. Without these flags, TLS is allowed, but not
required.
The exports(5) man page will be updated in a future commit.
Way back in r28911 (August 1997, CVS rev 1.22) we imported a NetBSD
information leak fix via OpenBSD. Unfortunatly we failed to track the
followup commit that fixed the type of the error code. Apply the change
from int to long now.
Reviewed by: emaste
Found by: CHERI
Obtained from: CheriBSD
MFC after: 3 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25779
This happens when there's only one component (e.g. "/foo"). This
(mostly-harmless) bug has been present since June 1990 when it was
commited to mountd.c SCCS version 5.9.
Note: the bug is on the second changed line, the first line is changed
for visual consistency.
Reviewed by: cem, emaste, mckusick, rmacklem
Found with: CHERI
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25759
r362214 exposed UID_NOBODY and GID_NOGROUP to userspace, so use them
instead of the numbers.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25281
r362158 modified struct export_args for make the ex_flags field 64bits
and also changed the anonymous credentials to allow more than 16 groups.
This patch fixes mountd.c to use the new structure.
It does allocate larger exportlist and grouplist structures now.
That will be fixed in a future commit.
The only visible change will be that the credentials provided for the
-maproot and -mapall exports options can now have more than 16 groups.
Reviewed by: kib, freqlabs
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25088
r361780 fixed the code so that it would only remove the duplicate when
it actually existed. However, that might have resulted in XU_NGROUPS + 1
groups being copied, running off the end of the array. This patch fixes
the problem.
Spotted during code inspection for other mountd changes.
MFC after: 2 weeks
Without this patch, if a SIGHUP is handled while the process is executing
get_exportlist(), that SIGHUP is essentially ignored because the got_sighup
variable is reset to 0 after get_exportlist().
This results in the exports file(s) not being reloaded until another SIGHUP
signal is sent to mountd.
This patch fixes this by resetting got_sighup to zero before the
get_exportlist() call while SIGHUP is blocked.
It also defines a delay time of 250msec before doing another exports reload
if there are RPC request(s) to process. This prevents repeated exports reloads
from delaying handling of RPC requests significantly.
PR: 246597
Reported by: patrykkotlowski@gmail.com
Tested by: patrykkotlowski@gmail.com
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25127
Prior to r174547, getgrouplist(3) always returned a groups list with
element 0 and 1 set to the basegid argument, so long as ngroups was > 1.
Post-r174547 this is not the case. r328304 disabled the deduplication that
removed the duplicate, but the duplicate still does not occur unless the
group for a user in the password database is also entered in the group
database.
This patch fixes mountd so that it handles the case where a user specified
with the -maproot or -mapall exports option has a getgrouplist(3) groups
list where groups[0] != groups[1].
Found while testing another mountd patch.
MFC after: 2 weeks
Comparing fsid_t objects requires internal knowledge of the fsid structure
and yet this is duplicated across a number of places in the code.
Simplify by creating a fsidcmp function (macro).
Reviewed by: mjg, rmacklem
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D24749
For strings without quotes and escapes dstptr and srcptr are equal, so
zeroing *dstptr before checking *srcptr is not a good idea. In practice
it means that in -maproot=65534:65533 everything after the colon is lost.
The problem was there since r293305, but before r346976 it was covered by
improper strsep_quote() usage.
PR: 238725
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Without this patch, mountd would delete/load all exports from the exports
file(s) when it receives a SIGHUP. This works fine for small exports file(s),
but can take several seconds to do when there are large numbers (10000+) of
exported file systems. Most of this time is spent doing the system calls
that delete/export each of these file systems. When the "-S" option
has been specified (the default these days), the nfsd threads are suspended
for several seconds while the reload is done.
This patch changes mountd so that it only does system calls for file systems
where the exports have been changed/added/deleted as compared to the exports
done for the previous load/reload of the exports file(s).
Basically, when SIGHUP is posted to mountd, it saves the exportlist structures
from the previous load and creates a new set of structures from the current
exports file(s). Then it compares the current with the previous and only does
system calls for cases that have been changed/added/deleted.
The nfsd threads do not need to be suspended until the comparison step is
being done. This results in a suspension period of milliseconds for a server
with 10000+ exported file systems.
There is some code using a LOGDEBUG() macro that allow runtime debugging
output via syslog(LOG_DEBUG,...) that can be enabled by creating a file
called /var/log/mountd.debug. This code is expected to be replaced with
code that uses dtrace by cy@ in the near future, once issues w.r.t. dtrace
in stable/12 have been resolved.
The patch should not change the usage of the exports file(s), but improves
the performance of reloading large exports file(s) where there are only a
small number of changes done to the file(s).
Tested by: pen@lysator.liu.se
PR: 237860
Reviewed by: kib
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20487
mountd.c uses a single linked list of "struct exportlist" structures,
where there is one of these for each exported file system on the NFS server.
This list gets long if there are a large number of file systems exported and
the list must be searched for each line in the exports file(s) when
SIGHUP causes the exports file(s) to be reloaded.
A simple benchmark that traverses SLIST() elements and compares two 32bit
fields in the structure for equal (which is what the search is)
appears to take a couple of nsec. So, for a server with 72000 exported file
systems, this can take about 5sec during reload of the exports file(s).
By replacing the single linked list with a hash table with a target of
10 elements per list, the time should be reduced to less than 1msec.
Peter Errikson (who has a server with 72000+ exported file systems) ran
a test program using 5 hashes to see how they worked.
fnv_32_buf(fsid,..., 0)
fnv_32_buf(fsid,..., FNV1_32_INIT)
hash32_buf(fsid,..., 0)
hash32_buf(fsid,..., HASHINIT)
- plus simply using the low order bits of fsid.val[0].
The first three behaved about equally well, with the first one being
slightly better than the others.
It has an average variation of about 4.5% about the target list length
and that is what this patch uses.
Peter Errikson also tested this hash table version and found that the
performance wasn't measurably improved by a larger hash table, so a
load factor of 10 appears adequate.
Tested by: pen@lysator.liu.se (with other patches)
PR: 237860
MFC after: 1 month
struct xucred. Do not bump XUCRED_VERSION as struct layout is not changed.
PR: 215202
Reviewed by: tijl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20415
In mountd.c, the grouplist structures are linked into a single global
linked list headed by "grphead". The only use of this linked list is
to free all list elements when the exportlist elements are also all being
free'd at the time the exports are being reloaded.
This patch replaces this one global linked list head with a list head in
each exportlist structure, where the grouplist elements for that exported
file system are linked.
The only change is that now the grouplist elements are free'd with the
associated exportlist element as they are free'd instead of all grouplist
elements being free'd after the exportlist elements are free'd. This
change should have no effect in practice.
This is being done, since a future patch that will add a "-I" option for
incrementally updating the exports in the kernel needs to know which
grouplist elements are associated with each exported file system and
having them linked into a list headed by the exportlist element does that.
MFC after: 1 month
Factor code into two functions.
read_exportfile() a functon which reads the exports file(s) and calls
get_exportlist_one() to process each of them.
delete_export() a function which deletes the exports in the kernel for a file
system.
The contents of these functions is just the same code as was used to do the
operations, moved into separate functions. As such, there is no semantic change.
This is being done in preparation for a future commit that will add an
option to do incremental changes of kernel exports upon receiving SIGHUP.
MFC after: 1 month
This patch moves the code that removes and frees all exportlist elements
out into a separate function called free_exports().
It does the same for the insertion of a new exportlist entry into a list.
It also adds a second argument to ex_search() for the list to use.
None of these changes have any semantic effect. They are being done to
prepare the code for future patches that convert the single linked list
for the exportlist to a hash table of lists and a patch that will do
incremental changes of exports in the kernel.
And it fixes the argument for SLIST_HEAD_INITIALIZER() to be a pointer,
which doesn't really matter, since SLIST_HEAD_INITIALIZER() doesn't use
the argument.
MFC after: 1 month
As reported by a FreeNAS user (see https://redmine.ixsystems.com/issues/55728),
mountd does more calls to getnameinfo() than it needs to; this changes it to
only call it for the RPC calls it needs the name information for.
Reported by: Dave Flowers
Reviewed by: imp, mav
Approved by: mav (mentor)
MFC after: 2 weeks
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D18430
option, we pass -1 down to listen, which causes it to use the
kern.ipc.soacceptqueue sysctl.
Approved by: mav
MFC after: 2 weeks
Sponsored by: iXsystems Inc
Previously the code only warned about the condition and then happily
proceeded to use the too large value resulting in the array
out-of-bounds access.
Obtained from: Panzura (Chuanbo Zheng)
MFC after: 10 days
Sponsored by: Panzura
When attempting to mount a non-directory which exists, return ENOTDIR instead
of ENOENT. If stat() or statfs() failed, don't pass part of the invalid
(struct statfs) to ex_search(). In that same case, preserve the value of "bad"
rather than overwriting with EACCES.
Submitted by: Bruce Leverett (Panasas)
Reviewed by: rmacklem
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14438
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Use SLIST from sys/queue.h instead of homebrew linked list for mountlist.
Reviewed by: bapt, rmacklem
MFC after: 1 week
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D12504
Use SLIST from sys/queue.h instead of homebrew linked list for the exportlist.
Reviewed by: bapt, rmacklem
MFC after: 1 week
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D12502
Introduced in r324007, the data alloced by strdup was never free'ed.
While here, remove cast to caddr_t when freeing dp.
Reported by: bde
MFC after: 1 week
X MFC With: r324007
The default values found in /etc/passwd and /etc/group are 65534, 65533.
In mountd.c, the defaults were -2, which was 65534 back when uid_t was 16bits.
Without this patch, a file created by root on an NFS exported volume without
the "-root=" export option will end up owned by uid 4**32 - 2.
When discussed on freebsd-current@, it seemed that users preferred the
values being changed to 65534/65533.
I have not added code to acquire these values from the databases, since
the mountd daemon might get "stuck" during startup waiting for a non-responsive
password database server.
Discussed on: freebsd-current
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
when the new/default NFS server was running, for the "-n" option.
This patch fixes the problem for head and stable/11. For stable/10 the
patch will need to be modified when MFC'd, since the stable/10 mountd.c
handles both old and new NFS servers.
Since the new NFS server uses vfs.nfsd.nfs_privport == 0 by default,
there wouldn't have been many users affected by the code not setting
it to 0 when the "-n" option was specified.
PR: 213450
Submitted by: rs@bytecamp.net
MFC after: 2 weeks
If you are getting your users/groups from a directory service such
as LDAP or AD it's possible for those usernames or groupnames to
contain spaces.
Submitted by: Sean E. Fagan
Reviewed by: rmacklem
MFC after: 1 week
Sponsored by: iXsystems
