The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
Thread might create a condition for delayed SU cleanup, which creates
a reference to the mount point in td_su, but exit without returning
through userret(), e.g. when terminating due to single-threading or
process exit. In this case, td_su reference is not dropped and mount
point cannot be freed.
Handle the situation by clearing td_su also in the thread destructor
and in exit1(). softdep_ast_cleanup() has to receive the thread as
argument, since e.g. thread destructor is executed in different
context.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
is delivered to vforked child. Issue is that we avoid stopping such
children in issignal() to not block parents. But executed AST, which
ignored stops, leaves the child with the signal pending but no AST
pending.
On first exec after vfork(), call signotify() to handle pending
reenabled signals. Adjust the assert to not check vfork children
until exec.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Despite the implication (process has pending signals -> the current
thread marked for AST and has TDF_NEEDSIGCHK set) is not true due to
other thread might manipulate its signal blocking mask, it should still
hold for the single-threaded processes. Enable check for the condition
for single-threaded case, and replicate it from userret() to ast() as
well, where we check that ast indeed has no signal to deliver.
Note that the check is under DIAGNOSTIC, it is not enabled for INVARIANTS
but !DIAGNOSTIC since it imposes too heavy-weight locking for day-to-day
used debugging kernel.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
AST must not execute with TDF_SBDRY or TDF_SEINTR/TDF_SERESTART thread
flags set, which is asserted in userret(). As the consequence, -1 return
from cursig() must not be possible.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
framework allowing to set the suspension policy for the dynamic block.
Extend the currently possible policies of stopping on interruptible
sleeps and ignoring such sleeps by two more: do not suspend at
interruptible sleeps, but interrupt them with either EINTR or ERESTART.
Reviewed by: jilles
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
for limiting disk (actually filesystem) IO.
Note that in some cases these limits are not quite precise. It's ok,
as long as it's within some reasonable bounds.
Testing - and review of the code, in particular the VFS and VM parts - is
very welcome.
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5080
Thread credentials are maintained as follows: each thread has a pointer to
creds and a reference on them. The pointer is compared with proc's creds on
userspace<->kernel boundary and updated if needed.
This patch introduces a counter which can be compared instead, so that more
structures can use this scheme without adding more comparisons on the boundary.
limits in the code which is deep in the call stack, and owns several
critical system resources, like vnode locks. Attempt to wait while
the per-mount softupdate thread cleans up the backlog may deadlock,
because the thread might need to lock the same vnode which is owned by
the waiting thread.
Instead of synchronously waiting for the worker, perform the worker'
tickle and pause until the backlog is cleaned, at the safe point
during return from kernel to usermode. A new ast request to call
softdep_ast_cleanup() is created, the SU code now only checks the size
of queue and schedules ast.
There is no ast delivery for the kernel threads, so they are exempted
from the mechanism, except NFS daemon threads. NFS server loop
explicitely checks for the request, and informs the schedule_cleanup()
that it is capable of handling the requests by the process P2_AST_SU
flag. This is needed because nfsd may be the sole cause of the SU
workqueue overflow. But, to not cause nsfd to spawn additional
threads just because we slow down existing workers, only tickle su
threads, without waiting for the backlog cleanup.
Reviewed by: jhb, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
remains. Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead. Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
components for PV kernels. These components are now standard as they
are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.
Differential Revision: https://reviews.freebsd.org/D2362
Reviewed by: royger
Tested by: royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes: yes
The point of this is to be able to add RACCT (with RACCT_DISABLED)
to GENERIC, to avoid having to rebuild the kernel to use rctl(8).
Differential Revision: https://reviews.freebsd.org/D2369
Reviewed by: kib@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
faults.
First, for accesses to direct map region should check for the limit by
which direct map is instantiated.
Second, for accesses to the kernel map, success returned from the
kernacc(9) does not guarantee that consequent attempt to read or write
to the checked address succeed, since other thread might invalidate
the address meantime. Add a new thread private flag TDP_DEVMEMIO,
which instructs vm_fault() to return error when fault happens on the
MAP_ENTRY_NOFAULT entry, instead of panicing. The trap handler would
then see a page fault from access, and recover in normal way, making
/dev/mem access safer.
Remove GIANT_REQUIRED from the amd64 memrw(), since it is not needed
and having Giant locked does not solve issues for amd64.
Note that at least the second issue exists on other architectures, and
requires similar patching for md code.
Reported and tested by: clusteradm (gjb, sbruno)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
calls to toggle TDF_SBDRY rather than passing PBDRY to individual sleep
calls.
- Remove the stop_allowed parameters from cursig() and issignal().
issignal() checks TDF_SBDRY directly.
- Remove the PBDRY and SLEEPQ_STOP_ON_BDRY flags.
PBDRY (which simply doesn't make any sense) nor PCATCH (which could
be used by a malicious process to work around the PCPU limit).
Submitted by: Rudo Tomori
Reviewed by: kib
changes in r246417 were incomplete as they did not add explicit calls to
sigdeferstop() around all the places that previously passed SBDRY to
_sleep(). In addition, nfs_getcacheblk() could trigger a write RPC from
getblk() resulting in sigdeferstop() recursing. Rather than manually
deferring stop signals in specific places, change the VFS_*() and VOP_*()
methods to defer stop signals for filesystems which request this behavior
via a new VFCF_SBDRY flag. Note that this has to be a VFC flag rather than
a MNTK flag so that it works properly with VFS_MOUNT() when the mount is
not yet fully constructed. For now, only the NFS clients are set this new
flag in VFS_SET().
A few other related changes:
- Add an assertion to ensure that TDF_SBDRY doesn't leak to userland.
- When a lookup request uses VOP_READLINK() to follow a symlink, mark
the request as being on behalf of the thread performing the lookup
(cnp_thread) rather than using a NULL thread pointer. This causes
NFS to properly handle signals during this VOP on an interruptible
mount.
PR: kern/176179
Reported by: Russell Cattelan (sigdeferstop() recursion)
Reviewed by: kib
MFC after: 1 month
executed. This means past the point where userret() is generally
executed.
Skip the td_pinned check if a callchain tracing is currently happening
and add a more robust check to pmc_capture_user_callchain() in order to
catch td_pinned leak past ast() in hwpmc case.
Reported and tested by: fabient
MFC after: 1 week
X-MFC: r240246
counter, without actually allocating the vnodes. The supposed use of
the getnewvnode_reserve(9) is to reclaim enough free vnodes while the
code still does not hold any resources that might be needed during the
reclamation, and to consume the slack later for getnewvnode() calls
made from the innards. After the critical block is finished, the
caller shall free any reserve left, by getnewvnode_drop_reserve(9).
Reviewed by: avg
Tested by: pho
MFC after: 1 week
TDP_NOSLEEPING leaking from syscallret() to userret() so that also
trap handling is covered. Also, the check on td_locks is not duplicated
between the two functions.
Reported by: avg
Reviewed by: kib
MFC after: 1 week
New kernel events can be added at various location for sampling or counting.
This will for example allow easy system profiling whatever the processor is
with known tools like pmcstat(8).
Simultaneous usage of software PMC and hardware PMC is possible, for example
looking at the lock acquire failure, page fault while sampling on
instructions.
Sponsored by: NETASQ
MFC after: 1 month
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
to do with global namespaces) and CAPABILITIES (which has to do with
constraining file descriptors). Just in case, and because it's a better
name anyway, let's move CAPABILITIES out of the way.
Also, change opt_capabilities.h to opt_capsicum.h; for now, this will
only hold CAPABILITY_MODE, but it will probably also hold the new
CAPABILITIES (implying constrained file descriptors) in the future.
Approved by: rwatson
Sponsored by: Google UK Ltd
If a system call wasn't listed in capabilities.conf, return ECAPMODE at
syscall entry.
Reviewed by: anderson
Discussed with: benl, kris, pjd
Sponsored by: Google, Inc.
Obtained from: Capsicum Project
MFC after: 3 months
Catch a set vnet upon return to user space. This usually
means return paths with CURVNET_RESTORE() missing.
If VNET_DEBUG is turned on we can even tell the function
that did the CURVNET_SET() which is really helpful; else
we print "N/A".
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
MFC after: 11 days
syscalls. On the dynamic syscall deregistration, wait until all
threads leave the syscall code. This somewhat increases the safety
of the loadable modules unloading.
Reviewed by: jhb
Tested by: pho
MFC after: 1 month
believed that all 486-class CPUs FreeBSD is capable to run on, either
have no FPU and cannot use external coprocessor, or have FPU on the
package and can use #MF.
Reviewed by: bde
Tested by: pho (previous version)
Extend struct sysvec with three new elements:
sv_fetch_syscall_args - the method to fetch syscall arguments from
usermode into struct syscall_args. The structure is machine-depended
(this might be reconsidered after all architectures are converted).
sv_set_syscall_retval - the method to set a return value for usermode
from the syscall. It is a generalization of
cpu_set_syscall_retval(9) to allow ABIs to override the way to set a
return value.
sv_syscallnames - the table of syscall names.
Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding
the call to cpu_set_syscall_retval().
The new functions syscallenter(9) and syscallret(9) are provided that
use sv_*syscall* pointers and contain the common repeated code from
the syscall() implementations for the architecture-specific syscall
trap handlers.
Syscallenter() fetches arguments, calls syscall implementation from
ABI sysent table, and set up return frame. The end of syscall
bookkeeping is done by syscallret().
Take advantage of single place for MI syscall handling code and
implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and
PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the
thread is stopped at syscall entry or return point respectively. The
EXEC flag augments SCX and notifies debugger that the process address
space was changed by one of exec(2)-family syscalls.
The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are
changed to use syscallenter()/syscallret(). MIPS and arm are not
converted and use the mostly unchanged syscall() implementation.
Reviewed by: jhb, marcel, marius, nwhitehorn, stas
Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc),
stas (mips)
MFC after: 1 month
well-known race condition, which elimination was the reason for the
function appearance in first place. If sigmask supplied as argument to
pselect() enables a signal, the signal might be delivered before thread
called select(2), causing lost wakeup. Reimplement pselect() in kernel,
making change of sigmask and sleep atomic.
Since signal shall be delivered to the usermode, but sigmask restored,
set TDP_OLDMASK and save old mask in td_oldsigmask. The TDP_OLDMASK
should be cleared by ast() in case signal was not gelivered during
syscall execution.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
not blocking the signal, signal is placed on the thread sigqueue. If
the selected thread is in kernel executing thr_exit() or sigprocmask()
syscalls, then signal might be not delivered to usermode for arbitrary
amount of time, and for exiting thread it is lost.
Put process-directed signals to the process queue unconditionally,
selecting the thread to deliver the signal only by the thread returning
to usermode, since only then the thread can handle delivery of signal
reliably. For exiting thread or thread that has blocked some signals,
check whether the newly blocked signal is queued for the process, and
try to find a thread to wakeup for delivery, in reschedule_signal(). For
exiting thread, assume that all signals are blocked.
Change cursig() and postsig() to look both into the thread and process
signal queues. When there is a signal that thread returning to usermode
could consume, TDF_NEEDSIGCHK flag is not neccessary set now. Do
unlocked read of p_siglist and p_pendingcnt to check for queued signals.
Note that thread that has a signal unblocked might get spurious wakeup
and EINTR from the interruptible system call now, due to the possibility
of being selected by reschedule_signals(), while other thread returned
to usermode earlier and removed the signal from process queue. This
should not cause compliance issues, since the thread has not blocked a
signal and thus should be ready to receive it anyway.
Reported by: Justin Teller <justin.teller gmail com>
Reviewed by: davidxu, jilles
MFC after: 1 month
