return partial line on any errors. See the comment in fgetln.c.
Add corresponding comment to fgetwln() too.
2) Rewrite r304607 case 1).
3) Remove "Fast path" from __fgetwc_mbs() since it can't detect encoding
errors and ignores them all.
PR: 212033
MFC after: 7 days
1) Don't forget to set __SERR on __slbexpand() error.
2) Check for __fgetwc() errors using errno. Don't check for __SERR
as PR suggested, it user-visible flag which can stick from previous
functions and stdio code don't check it for this purpose.
PR: 212033
MFC after: 3 days
- Avoid double use of "request" in a single sentence. Instead, describe
aio_sigevent as being used to request notification of the associated
operation's completion. This matches the language used to describe
aio_sigevent in aio(4).
- Simplify the prohibition on modifying buffers while requests are in
flight.
- Fix case mismatch.
- Drop note about not using stack variables. C programmers should be able
to figure out if a stack variable is safe based on the later warning
about the life cycle requirements of control blocks.
- Remove prohibition on modifying the I/O buffer for aio_fsync() since
it does not use an I/O buffer. For aio_mlock(), prohibit modifications
to the mapping (e.g. due to mprotect, munmap, mmap, etc.) but do not
prohibit modifications to the memory backing the buffer (stores into
the pages backing the buffer).
Requested by: wblock (1,2), kib (4)
Reviewed by: kib, rpokala, wblock
MFC after: 3 days
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7462
Right now, userspace (fast) gettimeofday(2) on x86 only works for
RDTSC. For older machines, like Core2, where RDTSC is not C2/C3
invariant, and which fall to HPET hardware, this means that the call
has both the penalty of the syscall and of the uncached hw behind the
QPI or PCIe connection to the sought bridge. Nothing can me done
against the access latency, but the syscall overhead can be removed.
System already provides mappable /dev/hpetX devices, which gives
straight access to the HPET registers page.
Add yet another algorithm to the x86 'vdso' timehands. Libc is updated
to handle both RDTSC and HPET. For HPET, the index of the hpet device
to mmap is passed from kernel to userspace, index might be changed and
libc invalidates its mapping as needed.
Remove cpu_fill_vdso_timehands() KPI, instead require that
timecounters which can be used from userspace, to provide
tc_fill_vdso_timehands{,32}() methods. Merge i386 and amd64
libc/<arch>/sys/__vdso_gettc.c into one source file in the new
libc/x86/sys location. __vdso_gettc() internal interface is changed
to move timecounter algorithm detection into the MD code.
Measurements show that RDTSC even with the syscall overhead is faster
than userspace HPET access. But still, userspace HPET is three-four
times faster than syscall HPET on several Core2 and SandyBridge
machines.
Tested by: Howard Su <howard0su@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D7473
The syscall is a trivial wrapper around new VOP_FDATASYNC(), sharing
code with fsync(2). For all filesystems, this commit provides the
implementation which delegates the work of VOP_FDATASYNC() to
VOP_FSYNC(). This is functionally correct but not efficient.
This is not yet POSIX-compliant implementation, because it does not
ensure that queued AIO requests are completed before returning.
Reviewed by: mckusick
Discussed with: avg (ZFS), jhb (AIO part)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7471
Depending on the address family and ai_flags containing AI_V4MAPPED,
it might not do a proper DNS lookup on the provided DNS address
Convert some `ai` boolean true/false checks to NULL/non-NULL while here.
MFC after: 1 week
PR: 211790
Reported by: Herbie.Robinson@stratus.com
Sponsored by: EMC / Isilon Storage Division
On particular slow networks, it can (on average) take longer to
resolve hosts to IP* addresses. 20 minutes seemed reasonable for
my work network
This will be solved in a more meaningful way (if possible) using
concurrency in the near future
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Now that we've updated the prototypes of the basename(3) and dirname(3)
functions to conform to POSIX, let's go ahead and reimplement dirname(3)
in such a way that it's thread-safe, but also guaranteed to succeed. C
libraries like glibc, musl and the one that's part of Solaris already
follow such an approach.
Move the existing implementation to another source file,
freebsd11_dirname.c to keep existing users of the API that pass in a
constant string happy, using symbol versioning.
Put a new version of the function in dirname.c, obtained from CloudABI's
C library. This version scans through the pathname string from left to
right, normalizing it, while discarding the last pathname component.
Reviewed by: emaste, jilles
Differential Revision: https://reviews.freebsd.org/D7355
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
Detected with devel/coccinelle following a hint from DragonFlyBSD.
MFC after: 1 month
This is the backing feature to implement C++11 thread storage duration
specified by the thread_local keyword. A destructor for given
thread-local object is registered to be executed at the thread
termination time using __cxa_thread_atexit(). Libc calls the
__cxa_thread_calls_dtors() during exit(3), before finalizers and
atexit functions, and libthr calls the function at the thread
termination time, after the stack unwinding and thread-specific key
destruction.
There are several uncertainties in the API which lacks a formal
specification. Among them:
- is it allowed to register destructors during destructing;
we allow, but limiting the nesting level. If too many iterations
detected, a diagnostic is issued to stderr and thread forcibly
terminates for now.
- how to handle destructors which belong to an unloading dso;
for now, we ignore destructor calls for such entries, and
issue a diagnostic. Linux does prevent dso unload until all
threads with destructors from the dso terminated.
It is supposed that the diagnostics allow to detect real-world
applications relying on the above details and possibly adjust
our implementation. Right now the choices were to provide the slim
API (but that rarely stands the practice test).
Tests are added to check generic functionality and to specify some of
the above implementation choices.
Submitted by: Mahdi Mokhtari <mokhi64_gmail.com>
Reviewed by: theraven
Discussed with: dim (detection of -std=c++11 supoort for tests)
Sponsored by: The FreeBSD Foundation (my involvement)
MFC after: 2 weeks
Differential revisions: https://reviews.freebsd.org/D7224,
https://reviews.freebsd.org/D7427
two sepatate functions to make glob(3) code less obscure and more simple.
There is no needs to make them inline since it is error path which supposed
to not happes often.
Our mprotect() function seems to take a "const void *" address to the
pages whose permissions need to be adjusted. POSIX uses "void *". Simply
stick to the POSIX one to prevent us from writing unportable code.
PR: 211423 (exp-run)
Tested by: antoine@ (Thanks!)
Just like with freelocale(3), I haven't been able to find any piece of
code that actually makes use of this function's return value, both in
base and in ports. The reason for this is that FreeBSD seems to be the
only operating system to have such a prototype. This is why I'm deciding
to not use symbol versioning for this.
It does seem that the pw(8) utility depends on the function's typing and
already had a switch in place to toggle between the FreeBSD and POSIX
variant of this function. Clean this up by always expecting the POSIX
variant.
There is also a single port that has a couple of local declarations of
setgrent(3) that need to be patched up. This is in the process of being
fixed.
PR: 211394 (exp-run)
to 0. Breaking this rule in 2001 NetBSD hack was imported which attempts
to workaround very limited glob() return codes amount. Use POSIX-compatible
workaround now with E2BIG which can't comes from other functions used
instead of prohibited 0.
When adding getline(3) and dprintf(3) into libc, those guards were added
to prevent breaking too many ports.
7 years later the ports tree have been fixed, it is time to remove this
FreeBSDism
While here remove the extra parenthesis surrounding dprintf(3)
Our version of this function currently returns an integer indicating
failure or success, whereas POSIX specifies that this function has no
return value. It returns void. Patch up the header, sources and man page
to use the right type. While there, use the opportunity to simplify the
body of this function.
Theoretically speaking, this change breaks the ABI of this function.
That said, I have yet to find any code that makes use of freelocale()'s
return value. I couldn't find any of it in the base system, nor did an
exp-run reveal any breakage caused by this change.
PR: 211394 (exp-run)
Update the existing manual pages for basename(3) and dirname(3) to
mention that in future versions of FreeBSD, these functions will no
longer use internal buffers for storing the results.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7356
POSIX allows these functions to be implemented in a way that the
resulting string is stored in the input buffer. Though some may find
this annoying, this has the advantage that it makes it possible to
implement this function in a thread-safe way. It also means that they
can be implemented in a way that they work for paths of arbitrary
length, as the output string of these functions is never longer than
max(1, len(input)).
Portable code already needs to be written with this in mind, so in my
opinion it makes very little sense to allow the existing behaviour.
Prevent the base system from falling back to this by switching over to
POSIX prototypes.
I'm not going to bump the __FreeBSD_version for this. The reason is that
it's possible to account for this change in a portable way, without
depending on a specific version of FreeBSD. An exp-run was done some
time ago. As far as I know, all regressions as a result of this have
already been fixed.
I'll give this change some time to settle. In the long run I want to
replace our copies by ones that are thread-safe and don't depend on
PATH_MAX/MAXPATHLEN.
It looks like the msgrcv() system call is already written in such a way
that the size is internally computed as a size_t and written into all of
td_retval[0]. This means that it is effectively already returning
ssize_t. It's just that the userspace prototype doesn't match up.
POSIX also declares NI_NUMERICSCOPE, which makes getnameinfo() return a
numerical scope identifier. The interesting thing is that support for
this is already present in code, but #ifdef disabled. Expose this
functionality by placing a definition for it in <netdb.h>.
While there, remove references to NI_WITHSCOPEID, as that got removed 11
years ago.
POSIX requires that these functions have an unsigned int for their first
argument; not an unsigned long.
My reasoning is that we can safely change these functions without
breaking the ABI. As far as I know, our supported architectures either
use registers for passing function arguments that are at least as big as
long (e.g., amd64), or int and long are of the same size (e.g., i386).
Reviewed by: ache
Differential Revision: https://reviews.freebsd.org/D6644
case it fully constructed, but for half-constructed too, so have no
other choice to pass original pattern from glob() down to globextend()
instead of attempt to reconstruct I implement previously.
2) Instead of copy&paste the same big enough code, make function for it:
globfinal().
The asynchronous I/O changes made previously result in different
behavior out of the box. Previously all AIO requests failed with
ENOSYS / SIGSYS unless aio.ko was explicitly loaded. Now, some AIO
requests complete and others ("unsafe" requests) fail with EOPNOTSUPP.
Reword the introductory paragraph in aio(4) to add a general
description of AIO before describing the vfs.aio.enable_unsafe sysctl.
Remove the ENOSYS error description from aio_fsync(2), aio_read(2),
and aio_write(2) and replace it with a description of EOPNOTSUPP.
Remove the ENOSYS error description from aio_mlock(2).
Log a message to the system log the first time a process requests an
"unsafe" AIO request that fails with EOPNOTSUPP. This is modeled on
the log message used for processes using the legacy pty devices.
Reviewed by: kib (earlier version)
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7151
globexp1() recursive calls, but glob0() was not supposed to be called
repeatedly in the original code. It finalize results by possible adding
original pattern for no match case, may return GLOB_NOMATCH error and
by sorting all things. Original pattern adding or GLOB_NOMATCH error
can happens each time glob0() called repeatedly, and sorting happens
for one item only, all things are never sorted. Second, f.e. "a{a"
pattern does not match "a{a" file but match "a" file instead
(just one example, there are many). Third, some errors (f.e. for limits
or overflow) can be ignored by GLOB_BRACE code because it forces return (0).
Add non-finalizing flag to glob0() and make globexp0() wrapper around
recursively called globexp1() to finalize things like glob0() does.
Reorganize braces code to work correctly.
2) Don't allow MB_CUR_MAX * strlen overallocation hits GLOB_LIMIT_STRING
(ARG_MAX) limit, use final string length, not malloced space for it.
3) Revive DEBUG-ifdefed section.
unmodified, if no matches found. But our original code strips all '\'
returning it. Rewrite the code to allow to reconstruct exact the
original pattern with backslashes for this case.
2) Prevent to use truncated pattern if MAXPATHLEN exceeded, return
GLOB_NOMATCH instead.
3) Fix few end loop conditions filling Char arrays with mbrtowc(),
MB_CUR_MAX is unneeded in two places and condition is less by one
in other place.
4) Prevent to use truncated filenames match if MAXPATHLEN exceeded,
skip such directory entries.
5) Don't end *pathend with L'/' in glob3() if limit is reached, this
change will be not visible since error is returned.
6) If error happens in (*readdirfunc)(), do the same GLOB_ABORTED
processing as for g_opendir() as POSIX requires.
