Split the driver up into two modules (if_rtw88_pci.ko and rtw88_core.ko).
This is in preparation for the hopefully eventually upcoming USB support
using the same driver core.
Note: this changes the module name to load to if_rtw88_pci.ko instead of
if_rtw88.ko. If using devmatch(8) everything should stay the same as
the driver name (used for net.wlan.devices) stays rtw88. If using
kld_list in rc.conf or loader.conf you will need to adjust the name.
Update man page for this.
MFC after: 3 days
A rarely occurring event (e.g. an event that occurs less than 1000
times during execution of a program) may require a lower minimum
threshold than 1000. Replace the hardcoded 1000 with a sysctl that
the administrator can use to permit smaller sampling count values.
Reviewed by: mhorne, mav
Sponsored by: University of Cambridge, Google, Inc.
Differential Revision: https://reviews.freebsd.org/D35400
Debug data is enabled via `makeoptions DEBUG=-g` in the kernel config
file (e.g. GENERIC).
If debug data is enabled and WITHOUT_KERNEL_SYMBOLS is set then debug
data is included in the kernel and module files.
PR: 264433
Discussed with: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Add list of supported names to iwlwifi.4 and an extended list with
PCI IDs and firmware prefix to iwlwififw.4.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D35227
If one boots up multiple copies of a template VM image containing a
zpool, the pool GUIDs will be identical, making it impossible to, e.g.,
share datasets between them.
This diff introduces a simple workaround for the problem: one can use
the script to, upon first boot, assign a new GUID to one or more zpools.
This will be useful when building ZFS-based VM images from release(7).
Reviewed by: mav, allanjude, asomers
Reviewed by: Pau Amma (docs)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35336
This is an initial commit for RDMA FreeBSD driver for Intel(R) Ethernet
Controller E810, called irdma. Supporting both RoCEv2 and iWARP
protocols in per-PF manner, RoCEv2 being the default.
Testing has been done using krping tool, perftest, ucmatose, rping,
ud_pingpong, rc_pingpong and others.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: #manpages (pauamma_gundo.com) [documentation]
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34690
The += for unique assignments is equivalent to =. Make these confusing
assignments simply assignments.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35242
Kthread worker is a single thread workqueue which can be used in cases
where specific kthread association is necessary, for example, when it
should have RT priority or be assigned to certain cgroup.
This change implements Linux v4.9 interface which mostly hides kthread
internals from users thus allowing to use ordinary taskqueue(9) KPI.
As kthread worker prohibits enqueueing of already pending or canceling
tasks some minimal changes to taskqueue(9) were done.
taskqueue_enqueue_flags() was added to taskqueue KPI which accepts extra
flags parameter. It contains one or more of the following flags:
TASKQUEUE_FAIL_IF_PENDING - taskqueue_enqueue_flags() fails if the task
is already scheduled to execution. EEXIST is returned and the
ta_pending counter value remains unchanged.
TASKQUEUE_FAIL_IF_CANCELING - taskqueue_enqueue_flags() fails if the
task is in the canceling state and ECANCELED is returned.
Required by: drm-kmod 5.10
MFC after: 1 week
Reviewed by: hselasky, Pau Amma (docs)
Differential Revision: https://reviews.freebsd.org/D35051
In some build configurations a warning about (an absolute path for)
-fuse-ld= not being supported by GCC was emitted during cleandir or
other non-build make targets.
For these non-build targets COMPILER_TYPE is set to "none" but we
treated the .else case for COMPILER_TYPE==clang as implying gcc.
Check instead for COMPILER_TYPE==gcc.
PR: 263913
Reported by: pstef
Reviewed by: pstef
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Linux has more tolerant checks of the user supplied cpuset_t's.
Minimum cpuset_t size that the Linux kernel permits in case of
getaffinity() is the maximum CPU id, present in the system / NBBY,
the maximum size is not limited.
For setaffinity(), Linux does not limit the size of the user-provided
cpuset_t, internally using only the meaningful part of the set, where
the upper bound is the maximum CPU id, present in the system, no larger
than the size of the kernel cpuset_t.
Unlike FreeBSD, Linux ignores high bits if set in the setaffinity(),
so clear it in the sched_setaffinity() and Linuxulator itself.
Reviewed by: Pau Amma (man pages)
In collaboration with: jhb
Differential revision: https://reviews.freebsd.org/D34849
MFC after: 2 weeks
Mention the loader tunable from 6a50157090
that needs to be set for system with more than 4GB of physical memory.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Retrieve FreeBSD revision number directly from sys/conf/newvers.sh
when building the compiler target triple value, avoiding manual
intervention on other files every new release.
Reviewed by: imp
MFC after: 2 months
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D34429
src.conf(5) previously stated they would be removed before FreeBSD 12.0,
but that did not happen. Change it to "a future version of FreeBSD."
Also pick up LOADER_KBOOT change (enabled on x86) in src.conf regen.
Reported by: jhb
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This fixes incomplete commit 2e547442ab
New sysctl allows to mark transmitted PPPoE LCP Control
ethernet frames with needed 3-bit Priority Code Point (PCP) value.
Confirming driver like if_vlan(4) uses the value to fill
IEEE 802.1p class of service field.
This is similar to Cisco IOS "control-packets vlan cos priority"
command.
It helps to avoid premature disconnection of user sessions
due to control frame drops (LCP Echo etc.)
if network infrastructure has a botteleck at a switch
or the xdsl DSLAM.
See also:
https://sourceforge.net/p/mpd/discussion/44692/thread/c7abe70e3a/
Tested by: Klaus Fokuhl at SourceForge
MFC after: 2 weeks
Get amd64 compiling. However, the current kboot supports an old way of
enumerating memory and the new way needs to be incorporated as well. The
powerpc folks could use either, it seems and newer powerpc platforms
need some changes for kboot to work anyway.
This commit includes the linker script, trampoline code to start the new
kernel, Linux system calls and the necessary configuration glue needed
to build the binaries.
This includes a quick hack to get multiboot support, but we need to
really share these defines. The multiiboot2.h is the minimum needed to
build. We have multiboot information in three places now, so a
refactoring is in order.
This should be considered, at best, preliminary and experimental for
anybody wishing to try it out.
Sponsored by: Netflix
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D35100
New sysctl allows to mark transmitted PPPoE LCP Control
ethernet frames with needed 3-bit Priority Code Point (PCP) value.
Confirming driver like if_vlan(4) uses the value to fill
IEEE 802.1p class of service field.
This is similar to Cisco IOS "control-packets vlan cos priority"
command.
It helps to avoid premature disconnection of user sessions
due to control frame drops (LCP Echo etc.)
if network infrastructure has a botteleck at a switch
or the xdsl DSLAM.
See also:
https://sourceforge.net/p/mpd/discussion/44692/thread/c7abe70e3a/
Tested by: Klaus Fokuhl at SourceForge
MFC after: 2 weeks
Latest dirdeps.mk is far more efficient when generating
DIRDEPS_CACHE.
Update dirdeps-options.mk to allow DEP_RELDIR to factor
into option processing. This is not very interesting if all
options are global.
Provide a very brief introduction to capabilities, using a couple of
sentences from David Chisnall's mailing list response[1] to a question
about Linux capabilities and Capsicum.
Mailing list subject (in case the archive URL changes) was
Re: Linux capabilities to Capsicum
[1] https://lists.freebsd.org/archives/freebsd-hackers/2022-April/001032.html
Reviewed by: oshogbo
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34945
This argument is useless for the vast majority of drivers. For now,
use __VA_ARGS__ wrapper macros so that that the *DRIVER_MODULE()
macros accept both the old version (with a devclass) and the new
version (which omits the argument and stores NULL in the
driver_module_data structure). This provides an API compatiblity
shim that can be merged to older stable branches.
Once all drivers relevant to 14.0 (both in and out of tree) have been
updated, the API compat shims can be dropped.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34963
These can be used in place of the CTRn() macros which require n to match
the number of optional arguments.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D34852
French national organization for standardization as "NF Z71‐300"
PR: 160227
Approved by: emaste
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D34886
Replace the old snd_bwnd field which was kept for compatibility with the
t_flags2 field from the tcpcb. This exposes in siftr logs interesting
things such as ECN, PLPMTUD, Accurate ECN and if first bytes are
complete.
Reviewed by: rscheff (transport), chengc_netapp.com, debdrup (manpages)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #73
Differential Revision: https://reviews.freebsd.org/D34672
It supports only the obsolete SMBv1 protocol, is known to be buggy, and
likely has security vulnerabilities. It will either be updated or
removed in the future, but for now at least describe the current state
in the man page.
PR: 263043
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Add three hooks to the livedump process: before, after, and for each
block of dumped data. This allows, for example, quiescing the system
before the dump begins or protecting data of interest to ensure its
consistency in the final output.
Reviewed by: markj, kib (previous version)
Reviewed by: debdrup (manpages)
Reviewed by: Pau Amma <pauamma@gundo.com> (manpages)
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34067
This dumper can instantiate and write the dump's contents to a
file-backed vnode.
Unlike existing disk or network dumpers, the vnode dumper should not be
invoked during a system panic, and therefore is not added to the global
dumper_configs list. Instead, the vnode dumper is constructed ad-hoc
when a live dump is requested using the new ioctl on /dev/mem. This is
similar in spirit to a kgdb session against the live system via
/dev/mem.
As described briefly in the mem(4) man page, live dumps are not
guaranteed to result in a usuable output file, but offer some debugging
value where forcefully panicing a system to dump its memory is not
desirable/feasible.
A future change to savecore(8) will add an option to save a live dump.
Reviewed by: markj, Pau Amma <pauamma@gundo.com> (manpages)
Discussed with: kib
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D33813
Add the missing .El which fixes the indentation of the memory range
definitions and operation. Add subsection headings to further clarify
this section. Do the same for the RETURN VALUES section, and mention
explicitly that MEM_EXTRACT_PADDR always returns zero.
Reviewed by: markj, 0mp, Pau Amma <pauamma@gundo.com>
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34574
When the unicode locales files where split off the non unicode locales
be_BY.ISO8859-5 and ca_IT.ISO8859-15 where non installed one due to
a typo, the other one was just missing its entry in the Makefile.
It was only notice a year later, by some postgres developpers as it was
breaking some of their tests.
Reported by: tmunro
Remove the trailing backslash from the last list item. This is a NOP and
never bothered anything because the next line was a blank line. Remove
it for correctness sake.
MFC after: 3 days
Note that a console typewriter device /dev/tty
and asynchronous communication interfaces /dev/tty[0-5]
first appeared in Version 1 AT&T UNIX.
Obtained from: OpenBSD
MFC after: 1 week
Been some time since 364fe18b8c when the URL was first in this file.
Update from svnweb to cgit for the URL listed at the end of this file.
In addition, update all URLs to HTTPS. Replace two URLs with links to
archive.org as the original URLs are no longer valid.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D34730
Add man pages for rtw88 and rtw88fw. Install a copy of the firmware
license file and hook up the driver and firmware modules to the build.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Relnotes: yes
Historically 32-bit Linuxulator under amd64 emulated the real i386
behavior. Since 3d8dd983 the old i386 Linux world can't be used under
amd64 Linuxulator as it don't know anything about amd64 machine (which
is returned now by newuname() syscall). So, add a knob to allow to swith
the behavior and use i386 Linux binaries on amd64.
Set knob to the new behavior as I think this is common to the modern
Linux distros.
Reviewed by: Pau Amma (doc), emaste
Differential revision: https://reviews.freebsd.org/D34708
MFC after: 2 weeks
The man page said dynamic allocation was required, but struct stack
can be allocated in any way, including on the stack. Make this clear,
and explain how to initialize the struct.
While I'm here, stack_save does not require any lock.
Reviewed by: markj, Pau Amma <pauamma_gundo.com>
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34461
ISA sound cards (and ISA itself) are long obsolete. NYCBUG dmesgd has
no entries for any of these devices after 2005.
Add deprecation notices to device attach routines and man pages for:
snd_ad1816 Analog Devices AD1816 SoundPort
snd_ess Ensoniq ESS
snd_gusc Gravis UltraSound
snd_mss Microsoft Sound System
snd_sbc Creative Sound Blaster
Reviewed by: cy, mav
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34604
These drivers are broken and have been scheduled for removal since 2012.
They will finally be removed before FreeBSD 14.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
There's too many broken hardware out there that wrongly has the
ACPI_FADT_NO_VGA bit set. Ignore it unless running as a virtualized
guest, as then the expectation would be that the hypervisor does
provide correct ACPI tables.
Reviewed by: emaste, 0mp, eugen
MFC: 3 days
Sponsored by: Citrix Systems R&D
PR: 230172
Differential revision: https://reviews.freebsd.org/D34392
/usr/freebsd-dist is used used by various programs as the location for
FreeBSD distribution files. In-tree programs following this convention
are bsdinstall(8) and release(7).
Reviewed by: Pau Amma <pauamma@gundo.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34552
Allow filtering based on the source or destination IP/IPv6 address in
the Ethernet layer rules.
Reviewed by: pauamma_gundo.com (man), debdrup (man)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34482
startmsg is a new rc.subr(8) function function to be used instead of
echo(1) when for boot messages. It replaces the often forgotten
check_startmsgs && echo ...
with
startmsg ...
No functional change intended.
I adjusted the commit message and did some final clean-ups of the patch
before committing.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
FreeBSD 14.0 is going to ship with a new implementation of the mixer(8)
command. Unfortunately, in order to support new features like mute, the
command-line interface of the new implementation is not backwards
compatible.
Update all the remaining documentation and scripts in the src tree
to use the new syntax.
While here, document in usbhidaction.1 that the mute functionality is
now supported.
Reviewed by: christos, debdrup, hselasky
Approved by: hselasky (src)
Fixes: 903873ce15 Implement and use new mixer(3) library for FreeBSD.
Differential Revision: https://reviews.freebsd.org/D34545
The security/520-pfdenied script only reports blocked packets from the
main ruleset or any blocklistd(8) anchor.
Add an option to periodic.conf(5) to make it possible to specify
additional anchors to report.
PR: 262446
Reviewed by: kp
In order to support various types of data stored in device
tree properties or ACPI _DSD packages, create a new enum so
the caller can specify the expected type of a property they
want to read, according to the binding. The bus logic will use
that information to process the underlying data.
For example in DT all integer properties are stored in BE format.
In order to get constant results across different platforms we
need to convert its endianness to match the host.
Another example are ACPI_TYPE_INTEGER properties stored
as uint64_t. Before this patch the ACPI logic would refuse
to read them if the provided buffer was smaller than 8 bytes.
Now this can be handled by using DEVICE_PROP_UINT32 type.
Modify the existing consumers of this API to reflect the changes
and update the man pages accordingly.
Reviewed by: mw
Obtained from: Semihalf
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33457
Temperature is exposed via 'temperature' leaf, humidity via 'humidity'
leaf. Align the manual page with the actual variable names.
Approved by: manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34460
With the initial import of 386BSD 0.1 in 1993, the daily execution of
/etc/news.expire was introduced (see commit 1bf9d5d951).
In 1997, this was brought into periodic resulting in daily/330.news
(see commit 28dce04d19). But as far as I see, /etc/news.expire has
never existed.
PR: 256238
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30631
The new dev.netmap.max_bridges sysctl tunable can be set in
loader.conf(5) to change the default maximum number of VALE
switches that can be created. Current defaults is 8.
MFC after: 2 weeks
Update man pages given auto-loading is now enabled by default and
no user configuration is needed to load the driver.
Also note that the iwlwifi driver will appear the first time in 13.1-R.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Relnotes: yes
When filtering Ethernet packets allow rules to specify a mac address
with a mask. This indicates which bits of the specified address are
significant. This allows users to do things like filter based on device
manufacturer.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Document how 'ether' rules can be set, and what options they support.
Reviewed by: bcr
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31751
Define a place for sysroot trees to live. This assumes they come from
the base in some way, though there's not yet a build/install/etc sysroot
target. Include the FreeBSD version so multiple verrsions can be
installed on one system (it also includes the whole uname version, so
one could, in theory, install variants like CheriBSD or whatever on the
same system as FreeBSD). Use MACHINE.MACHINE_ARCH to be consistent with
the release practices, /usr/obj and other naming conventions.
Sponsored by: Netflix
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D33754
During distributeworld we call distribute on subdirectories, which in
turn calls installconfig. However, this recursive installconfig call
appends the distribution name (in these cases, "base") to DESTDIR. For
install(1) this works fine as its -D argument comes from the top-level
Makefile.inc1, which passes the original DESTDIR, thereby resulting in
the METALOG entry having the distribution name as a prefix representing
its true installed path relative to the root, but for the hand-rolled
entries they do not use install(1) and thus do not have access to what
the original DESTDIR was, resulting in the METALOG missing this prefix.
Thus, pass down the name of the distribution via a new variable DISTBASE
(chosen as Makefile.inc1 already uses that to convey this exact same
information to etc's distrib-dirs during distributeworld) and prepend
this to the handful of manually-generated METALOG entries. For the
installworld case this variable will be empty and so this behaves as
before.
Note that we need to be careful to avoid double slashes in the METALOG;
distributeworld uses find | awk to split the single METALOG up into
multiple dist.meta files, and this relies on the paths in the METALOG
having the exact prefix ./dist (or ./dist/usr/lib/debug).
Reviewed by: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D33997
This adds missing Alt Gr mappings for the keys "q", "w", "e" an "c" to
conform with ABNT2 standard.
PR: 256416
Submitted by: Neebz <vpguyrhpjltta@logicstreak.com>
Reviewed by: emaste
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33801
libssp_nonshared is a special case for (only) i386 and power*. Add a
comment explaining why, based on the original commit message that added
it.
MFC after: 1 week
Fixes: 0f61170882 ("libssp_nonshared: use only on i386 and ppc")
Sponsored by: The FreeBSD Foundation
This reverts commit 489d7a8528.
The flag leaks into some port builds, causing them to fail. I will
recommit it with some sort of opt-out later on.
Reported by: mi
- Do not set Os to FreeBSD explicitly. We don't do it in other manual
pages.
- Remove macros from the -width specifier.
- Use Xr instead of Cm to refer to the freebsd-update command.
- Address some mandoc lint warnings and use \(em instead of --.
- Wordsmith some paragraphs.
- Add a missing El macro.
MFC after: 1 week
This was useful in converting armv8crypto to use buffer cursors. There
are some cases where one wants to make two passes over data, and this
provides a way to "reset" a cursor.
Reviewed by: jhb
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D28949
Allow a zone to opt out of cache size management. In particular,
uma_reclaim() and uma_reclaim_domain() will not reclaim any memory from
the zone, nor will uma_timeout() purge cached items if the zone is idle.
This effectively means that the zone consumer has control over when
items are reclaimed from the cache. In particular, uma_zone_reclaim()
will still reclaim cached items from an unmanaged zone.
Reviewed by: hselasky, kib
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34142
GCC is more pedantic than clang about warning when a function doesn't
handle undefined enum values (see GCC bug 87950). Clang's warning
gives a more pragmatic coverage and should find any real bugs, so
disable the warning for GCC rather than adding __unreachable
annotations to appease GCC.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D34147
With the meta-build, it's always a NO_CLEAN build. Provide a way to
remove so one can rebuild from scratch. 'cleankernel' will delete the
kernel and modules object directories. Document this in build(7).
Sponsored by: Netflix
Reviewed by: debdrup, markj
Differential Revision: https://reviews.freebsd.org/D32978
LLDB currently defaults to enabled on all architectures except arm and
riscv64 (and can probably be enabled for 32-bit arm). Switch to an
opt-out list.
Reviewed by: pkubaj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34218
This produces an "expansion of date or time macro is not reproducible"
warning or error upon use of __DATE__ or __TIME__.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29580
While mlx5 is not yet enabled on powerpc64le, cxgbe is.
The binary seems to work properly.
Differential revision: https://reviews.freebsd.org/D34026
Reviewed by: emaste
Parts of zstd, used in openzfs and other places, trigger a new clang 14
-Werror warning:
```
sys/contrib/zstd/lib/decompress/huf_decompress.c:889:25: error: use of bitwise '&' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
While the warning is benign, it should ideally be fixed upstream and
then vendor-imported, but for now silence it selectively.
MFC after: 3 days
clang doesn't implement it, and Linux doesn't enforce it. As a
result, new instances keep cropping up both in FreeBSD's code and in
upstream sources from vendors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D34144
As promised to the transport call on 11/4/22 here is an implementation
of hystart++ for cubic. It also cleans up the tcp_congestion function
to have a better name. Common variables are moved into the general
cc.h structure so that both cubic and newreno can use them for
hystart++
Reviewed by: Michael Tuexen, Richard Scheffenegger
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D33035
Advise people to omit $FreeBSD$ (in both comments and macros) unless the
code is definitely going to be merged to stable/12. This strengthens
previous statements and is appropriate now that stable/11 is no longer
supported. If people are wrong and things are unexpected merged to 12,
tags can be added before that merge. No sense adding a tag that will
never be expanded and removed later on the off chance it might wind up
in stable/12.
The next step is likely to weaken this to apply just to mergemaster
managed files, but not today.
Reviewed by: rpokala, cem, erj, hselasky, brooks, kib
Differential Revision: https://reviews.freebsd.org/D34152
setsockopt() grants full access to the deprecated
TOS byte. For TCP, mask out the ECN codepoint, so that
only the DSCP portion can be adjusted.
Reviewed By: tuexen, hselasky, #manpages, #transport, debdrup
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34154
While LLDB on powerpc and powerpcspe builds as-is, on powerpc64 and
powerpc64le it requires adding a couple of additional source files
to build.
Differential review: https://reviews.freebsd.org/D34043
Approved by: dim, imp, emaste
TCP_BBR:
- Fix a typo introducted in 1b90dfa5d2, which was reported by tuexen@
TCP_RACK:
- Correct two sysctl descriptions: s/corret/correct/
tcp_bbr(4): Also fix s/measurment/measurement/ in the man page
MFC after: 1 week
armeb is no longer a supported MACHINE_ARCH.
Reviewed by: imp, emaste
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D34019
Verified spelling in the README and fixed the typos.
Also updated the contact section by removing Artur and adding Dawid
Gorecki who is now the second ENA FreeBSD driver developer.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Merge commit '2530eb1fa01bf28fbcfcdda58bd41e055dcb2e4a'
Adjust the driver to the upgraded ena-com part twofold:
First update is related to the driver's NUMA awareness.
Allocate I/O queue memory in NUMA domain local to the CPU bound to the
given queue, improving data access time. Since this can result in
performance hit for unaware users, this is done only when RSS
option is enabled, for other cases the driver relies on kernel to
allocate memory by itself.
Information about first CPU bound is saved in adapter structure, so
the binding persists after bringing the interface down and up again.
If there are more buckets than interface queues, the driver will try to
bind different interfaces to different CPUs using round-robin algorithm
(but it will not bind queues to CPUs which do not have any RSS buckets
associated with them). This is done to better utilize hardware
resources by spreading the load.
Add (read-only) per-queue sysctls in order to provide the following
information:
- queueN.domain: NUMA domain associated with the queue
- queueN.cpu: CPU affinity of the queue
The second change is for the CSUM_OFFLOAD constant, as ENA platform
file has removed its definition. To align to that change, it has been
added to the ena_datapath.h file.
Submitted by: Artur Rojek <ar@semihalf.com>
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
The text after .error et al is emitted verbatim.
Reviewed by: sjg
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33904
sys/cam/scsi/scsi_sa.c:
Add comments explaining the priority order of the various
sources of timeout values. Also, explain that the probe
that pulls in drive recommended timeouts via the REPORT
SUPPORTED OPERATION CODES command is in a race with the
thread that creates the sysctl variables. Because of that
race, it is important that the sysctl thread not load any
timeout values from the kernel environment.
share/man/man4/sa.4:
Use the Sy macro to emphasize thousandths of a second
instead of capitalizing it.
Requested by: Warner Losh <imp@freebsd.org>
Requested by: Daniel Ebdrup Jensen <debdrup@freebsd.org>
Sponsored by: Spectra Logic
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33883
Tape drives that arrive after boot will still use any loader
tunables that apply to that instance.
Requested by: Pau Amma <pauamma@gundo.com>
MFC After: 1 week
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D33883
Summary:
The sa(4) driver has historically used tape drive timeouts that
were one-size fits all, with compile-time options to adjust a few
of them.
LTO-9 drives (and presumably other tape drives in the future)
implement a tape characterization process that happens the first
time a tape is loaded. The characterization process formats the
tape to account for the temperature and humidity in the environment
it is being used in. The process for LTO-9 tapes can take from 20
minutes (I have observed 17-18 minutes) to 2 hours according to the
documentation.
As a result, LTO-9 drives have significantly longer recommended
load times than previous LTO generations.
To handle this, change the sa(4) driver over to using timeouts
supplied by the tape drive using the timeout descriptors obtained
through the REPORT SUPPORTED OPERATION CODES command. That command
was introduced in SPC-4. IBM tape drives going back to at least
LTO-5 report timeout values. Oracle/Sun/StorageTek tape drives
going back to at least the T10000C report timeout values. HP LTO-5
and newer drives report timeout values. The sa(4) driver only
queries drives that claim to support SPC-4.
This makes the timeout settings automatic and accurate for newer
tape drives.
Also, add loader tunable and sysctl support so that the user can
override individual command type timeouts for all tape drives in
the system, or only for specific drives.
The new global (these affect all tape drives) loader tunables are:
kern.cam.sa.timeout.erase
kern.cam.sa.timeout.load
kern.cam.sa.timeout.locate
kern.cam.sa.timeout.mode_select
kern.cam.sa.timeout.mode_sense
kern.cam.sa.timeout.prevent
kern.cam.sa.timeout.read
kern.cam.sa.timeout.read_position
kern.cam.sa.timeout.read_block_limits
kern.cam.sa.timeout.report_density
kern.cam.sa.timeout.reserve
kern.cam.sa.timeout.rewind
kern.cam.sa.timeout.space
kern.cam.sa.timeout.tur
kern.cam.sa.timeout.write
kern.cam.sa.timeout.write_filemarks
The new per-instance loader tunable / sysctl variables are:
kern.cam.sa.%d.timeout.erase
kern.cam.sa.%d.timeout.load
kern.cam.sa.%d.timeout.locate
kern.cam.sa.%d.timeout.mode_select
kern.cam.sa.%d.timeout.mode_sense
kern.cam.sa.%d.timeout.prevent
kern.cam.sa.%d.timeout.read
kern.cam.sa.%d.timeout.read_position
kern.cam.sa.%d.timeout.read_block_limits
kern.cam.sa.%d.timeout.report_density
kern.cam.sa.%d.timeout.reserve
kern.cam.sa.%d.timeout.rewind
kern.cam.sa.%d.timeout.space
kern.cam.sa.%d.timeout.tur
kern.cam.sa.%d.timeout.write
kern.cam.sa.%d.timeout.write_filemarks
The values are reported and set in units of thousandths of a
second.
share/man/man4/sa.4:
Document the new loader tunables in the sa(4) man page.
sys/cam/scsi/scsi_sa.c:
Add a new timeout_info array to the softc.
Add a default timeouts array, along with descriptions.
Add a new sysctl tree to the softc to handle the timeout
sysctl values.
Add a new function, saloadtotunables(), that will load
the global loader tunables first and then any per-instance
loader tunables second.
Add creation of the new timeout sysctl variables in
sasysctlinit().
Add a new, optional probe state to the sa(4) driver. We
previously didn't do any probing, but now we probe for
timeout descriptors if the drive claims to support SPC-4 or
later. In saregister(), we check the SCSI revision and
either launch the probe state machine, or announce the
device and become ready.
In sastart() and sadone(), add support for the new
SA_STATE_PROBE. If we're probing, we don't go through
saerror(), since that is currently only written to handle
I/O errors in the normal state.
Change every place in the sa(4) driver that fills in
timeout values in a CCB to use the new timeout_info[] array
in the softc.
Add a new saloadtimeouts() routine to parse the returned
timeout descriptors from a completed REPORT SUPPORTED
OPERATION CODES command, and set the values for the
commands we support.
MFC after: 1 week
Sponsored by: Spectra Logic
Test Plan:
Try this out with a variety of tape drives and make sure the timeouts that
result (sysctl kern.cam.sa to see them) are reasonable.
Reviewers: #manpages, #cam
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D33883
The approach taken by the stack gap implementation was to insert a
random gap between the top of the fixed stack mapping and the true top
of the main process stack. This approach was chosen so as to avoid
randomizing the previously fixed address of certain process metadata
stored at the top of the stack, but had some shortcomings. In
particular, mlockall(2) calls would wire the gap, bloating the process'
memory usage, and RLIMIT_STACK included the size of the gap so small
(< several MB) limits could not be used.
There is little value in storing each process' ps_strings at a fixed
location, as only very old programs hard-code this address; consumers
were converted decades ago to use a sysctl-based interface for this
purpose. Thus, this change re-implements stack address randomization by
simply breaking the convention of storing ps_strings at a fixed
location, and randomizing the location of the entire stack mapping.
This implementation is simpler and avoids the problems mentioned above,
while being unlikely to break compatibility anywhere the default ASLR
settings are used.
The kern.elfN.aslr.stack_gap sysctl is renamed to kern.elfN.aslr.stack,
and is re-enabled by default.
PR: 260303
Reviewed by: kib
Discussed with: emaste, mw
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33704
From a user point of view, this makes ^T work out of the box.
Reviewed By: debdrup (man page)
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D33842
Allow projects based on the FreeBSD tree to append to _PRIVATELIBS
and _INTERNALLIBS by simply maintaining their own lists of
LOCAL_PRIVATELIBS and LOCAL_INTERNALLIBS, respectively.
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D33901
This tiny change to the example makes devd capable of reacting to carp
status change events on VLAN interfaces.
Reported by: Thomas Steen Rasmussen (tykling) <thomas at gibfest.dk>
These configuration options were removed in commit dfe13344f5.
Some forthcoming work will update the UMA man page to describe its
current behaviour on NUMA systems.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
It's sometimes easier to exclude some modules rather than listing all
possibly needed ones with MODULES_OVERRIDE.
So for this add MODULES_EXCLUDE which do exactly as one would guess, excludes
some modules from the build/install.
For example if one wants to exclude all modules which are only present in the
GENERIC config on amd64 :
export MODULES_EXCLUDE=$(grep -E '^device' sys/amd64/conf/GENERIC | awk '{print $2}' | tr '\n' ' ')
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33443
vm_reserv.c uses its own bitstring implemenation for popmaps. Using
the bitstring_t type from a standard header eliminates the code
duplication, allows some bit-at-a-time operations to be replaced with
more efficient bitstring range operations, and, in
vm_reserv_test_contig, allows bit_ffc_area_at to more efficiently
search for a big-enough set of consecutive zero-bits.
Make bitstring changes improve the vm_reserv code. Define a bit_ntest
method to test whether a range of bits is all set, or all clear.
Define bit_ff_at and bit_ff_area_at to implement the ffs and ffc
versions with a parameter to choose between set- and clear- bits.
Improve the area_at implementation. Modify the bit_nset and
bit_nclear implementations to allow code optimization in the cases
when start or end are multiples of _BITSTR_BITS.
Add a few new cases to bitstring_test.
Discussed with: alc
Reviewed by: markj
Tested by: pho (earlier version)
Differential Revision: https://reviews.freebsd.org/D33312
This cipher is a wrapper around the ChaCha20-Poly1305 AEAD cipher
which accepts a larger nonce. Part of the nonce is used along with
the key as an input to HChaCha20 to generate a derived key used for
ChaCha20-Poly1305.
This cipher is used by WireGuard.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33523
When TCP_MD5SIG is set on a socket, all packets are dropped that don't
contain an MD5 signature. Relax this behavior to accept a non-signed
packet when a security association doesn't exist with the peer.
This is useful when a listen socket set with TCP_MD5SIG wants to handle
connections protected with and without MD5 signatures.
Reviewed by: bz (previous version)
Sponsored by: nepustil.net
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D33227
libsoft was a transition from the FreeBSD/armv6 10 (and earlier) with
'softfp' ABI (that is, hardware float, but passed as integer registers)
to the 'hardfp' ABI that was in FreeBSD/armv[67] in FreeBSD 11 and
newer. It's been off by default since it was created.
This was mostly used by people that wanted to do a source upgrade of
their system from FreeBSD 10 to 11 or from 11-current before the cutover
to 11-current after. This should not be confused with the full software
floating point implementation (that doesn't use the hardware floating
point instructions at all) that is used out of tree by at least one
company selling armv7 gear that has no FPU.
There's no longer a need for the transition, so retire it like should
likely have happened sometime before FreeBSD 12 was released 3 years
ago.
Sponsored by: Netflix
Suggestions by: jrtc27, jhb
Reviewed by: manu, mmel
Differential Revision: https://reviews.freebsd.org/D33761
Advertise rc.conf method as the right way to enable it, mention
file system mapping... and change some wording.
Reviewed By: emaste, debdrup, Pau Amma
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D33720
We need to include bsd.endian.mk from bsd.compiler.mk to enable
compressed symbols only on FreeBSD little endian targets.
However, since we include bsd.compiler.mk from Makefile.inc1 and from
the build tools makefiles, it has to work on Linux and osx. Make the
error condition only when we're building natively (so that we are
forced to add a new architecture to the list).
Otherwise, define bogus, poisoned values and leave TARGET_ENDIANNESS
undefined. Since we don't actually use TARGET_ENDIANNESS for anything
in the cross building phase, these values are a failsafe agianst their
use. The one place in the build phase that detects endian is
appropriately protected.
Sponsored by: Netflix
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D33742
This function clones an existing crypto request, but associates the
new request with a specified session. The intended use case is for
drivers to be able to fall back to software by cloning a request and
dispatch it to an internally allocated software session.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33607
Convert ipfilter userland function declarations from K&R to ANSI. This
syncs our function declarations with NetBSD hg commit 75edcd7552a0
(apply our changes). Though not copied from NetBSD, this change was
partially inspired by NetBSD's work and inspired by style(9).
Reviewed by: glebius (for #network)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33595
There left only three modules that used dom_init(). And netipsec
was the last one to use dom_destroy().
Differential revision: https://reviews.freebsd.org/D33540
The historical BSD network stack loop that rolls over domains and
over protocols has no advantages over more modern SYSINIT(9).
While doing the sweep, split global and per-VNET initializers.
Getting rid of pr_init allows to achieve several things:
o Get rid of ifdef's that protect against double foo_init() when
both INET and INET6 are compiled in.
o Isolate initializers statically to the module they init.
o Makes code easier to understand and maintain.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D33537
Remove vestiges of arm big endian support. Also use the more proper
MACHINE_CPUARCH instead of MACHINE to test for that here.
This leaves powerpc as the only big endian arch.
Sponsored by: Netflix
