.PATH to ${.CURDIR}/[...]/kern , the "exists" expression will fail for the
form exists(${.CURDIR}/[...]/kern/). This appears to be happening because
make is searching for the argument to "exists" by using .PATH rather than a
relative search, because .PATH and the argument match at the beginning.
Additionally, make appears to consider a path that starts with ${.CURDIR}
as relative, even though it expands to an absolute path.
The reason that most people aren't seeing this problem is that the absolute
paths of /usr/src/sys and /sys are also searched, so as long as the kernel
source can be found in at least one of those places, no problems surface.
This problem was inadvertently introduced on 1 December 2000, with the
addition of the sysvipc modules.
bind distribution, but until now was not being built as a separate
entity. For documentation, see these man pages:
assertions(3), eventlib(3), heap(3), logging(3), memcluster(3), tree(3).
Reviewed by: jdp
${LIB} library". "standard" tends to imply the one that is normally
used... but by default it is not the case - the .so would be the
"standard" library. Therefore, change this to 'static'. Another option
might be "conventional ${LIB} library".
by -n is nonexistant, then the following -d was misinterpreted with
a strange error. By putting double quotes (") around the argument,
we can be sure there is _something_ there that we can check a zero
length against.
cause the working directory to be used. Make it so.
When we're more convinced that it'll work, we might try this
to avoid a shell invocation:
.if defined(MAKEOBJDIRPREFIX) && !empty(MAKEOBJDIRPREFIX) &&
exists(${CANONICALOBJDIR}/)
Reported by: bde
there happens to be a source file named install.sh. The null rule
for "install" in the NOINFO case must not be completely null, since
then it may be overridden by the implicit .sh rule.
via the MODULE_VERSION() and MODULE_DEPEND() macros that both the loader
and kld system know how to deal with. The old DT_NEEDED tag is still
supported by the loader (and will remain supported for a while) - but the
kernel side presently doesn't know how to deal with DT_NEEDED.
do not have the kernel you wish to compile against in either
/usr/src/sys or /sys, then you will need to set SYSDIR to point to the
sys directory of the source tree that contians the source.
Also, minor tweaks to the load/unload targets from Bruce.
I've had this through several make worlds, as well as using it on a
daily basis for the past couple of weeks to build modules needed for
testing at Timing Solutions.
Reviewed and revised by: bde
Work sponsored by: Timing Solutions
it into a ``shared'' .ko file. This intermediate file can be directly
linked into a static kernel. This isn't all that useful yet but will
become much more interesting shortly.
essentially as in kernel makefiles, so that module sources can include
<stddef.h> and other standard headers. Only add the second path when
the first path can't be found, instead of when DESTDIR is defined.
Adding it used to be just an obfuscation.
Use "${.OBJDIR}" instyead of "." in -I paths. Using "${.OBJDIR}" just
gave more verbose command lines and depend files.
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
we use. The .c half is statically compiled into the kernel. It's kinda
silly to generate a .h file on the fly that has inlines to call the
.c stuff when the .c code is fixed.
Also, zap the special treatment for VFS_KLD modules. This treatment
applies to lots of things, not just VFS's.
files (opt_*.h) automatically (if they are in ${SRCS}).
Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just
if VFS_KLD is defined).
There are some complications to avoid using the "@" symlink before it
is built.
All Makefiles now use MACHINE_ARCH for the target architecture.
Unification is required for cross-building.
Tags added to:
sys/boot/Makefile
sys/boot/arc/loader/Makefile
sys/kern/Makefile
usr.bin/cpp/Makefile
usr.bin/gcore/Makefile
usr.bin/truss/Makefile
usr.bin/gcore/Makefile:
fixed typo: MACHINDE -> MACHINE_ARCH
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables
(KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the
Makefile of the ATAPI module
3) textual fixups
Specifically intended for removing -fschg ("INSTALLFLAGS_EDIT=:S/schg/uchg/")
this makes the NOFSCHG flag redundant. NOFSCHG will still be honoured by
bsd.lib.mk but is valid for buildworld only. NOFSCHG is still implemented in
the old way (ie. _not_ ".if NOFSCHG then { INSTALLFLAGS_EDIT+=:S/schg/,/ }"
to emphasize the fact that NOFSCHG is only supported in a limited
fashion and for buildworld.
The interface and implementation are such that future use of flags such
as sappnd can also be easily removed or altered (perhaps to uappnd).
This commit brought to you by the letters B, D, and E, and the numbers six,
one, thirteen, and three.
-DNOFSCHG disables installation of libs with flag schg
GAMEGRP change the group with which games are installed
also organize the binary section into alphebetical order some what..
/usr/sbin/sysctl -> ${DESTDIR}/sbin/sysctl in some versions of 2.2,
and this link was broken if DESTDIR was set.
Added a SYMLINKS macro. This works the same as LINKS, except it
creates symlinks and the linked-to pathname may be relative. This
is more flexible than LN_FLAGS, since it supports installing
symlinks independently of hard links.
Use `ln -f[s] ...' instead of `rm -f ...; ln [-s] ...' for LINKS and
SYMLINKS. This is equivalent if the target is neither a directory nor
a symlink to a directory.
PR: 8279
is not implied by -Wall as claimed by gcc.1. Adding it causes a
measly 7193 new warnings for LINT, mostly for "unused parameter" and
"comparison between signed and unsigned".
There are only skeletons left here; they merely serve as a backup to
include the real versions under ${PORTSDIR}/Mk while we update the ports
tree to include them directly.
<bsd.libnames.mk> is included regardless of the object file format.
This is needed to fix the a.out PAM breakage that manifests itself
when trying to build login.
When linking statically, LIBPAM is augmented with the extra libraries
that the PAM modules require. The idea is to centralize this
information rather than scattering it about in the Makefiles of
all the applications that use (OK, will use) PAM.
There is a new variable MINUSLPAM that should be used instead of
"-lpam". In the static case, it gets -l flags for the extra required
libraries.
This approach was suggested by <bde>, but he didn't actually review
my changes.
building dlopen-able modules, and add features needed to build a
static PAM library. I think I cleaned it up some, too, but beauty
is in the eye of the beholder.
You can now build a shared library without version numbers, by
defining SHLIB_NAME to something like "pam_unix.so". If SHLIB_MAJOR
and/or SHLIB_MINOR are set, SHLIB_NAME gets the usual default value,
but it can be overridden if desired. If none of these symbols are
set, no shared library is built.
SHLIB_LINK controls the name of the symbolic link that points to
the library. If it is unset, no link is made. In the usual case,
it gets the right default: e.g., "libc.so" for ELF, nothing for
a.out. This can be overridden.
STATICOBJS can be set to a list of extra object files that should
be added to the static library but not to the shared library.
These objects are added to the profiled library too.
These changes should make it easy to use <bsd.lib.mk> for building
things such as PAM modules and dynamic linkers, for which <bsd.prog.mk>
has been abused until now.
(as given by "uname -m") by which you can specify which
architectures the port is appropriate for.
Idea borrowed from: NetBSD, OpenBSD
Reviewed by: simokawa
(2) New variable PERL_ARCH (value: ${ARCH}-freebsd) that is also
passed to ${PLIST_SUB}. Use it to simplify PLISTs.
Submitted by: simokawa
(3) Check OSVERSION as well as existence of /usr/bin/perl5 before
assuming USE_PERL5 is to be a no-op. Basically to allow building
of 2.2-INDEX on a 3.0 machine.
(4) Change USE_QT definition to use new shlib version (2) and
directory (qt142).
(5) Uncomment temporary Motif dependency for parallel package
building. We still need to figure out a way to install the pkg
database files, but it's a start.
(6) Move EXTRACT_SUFX up into the pre.mk area so it can be used in
exists() tests.
(7) Add MASTER_SITE_COMP_SOURCES. Note that this is defined like
"/pub/usenet/comp.sources.%SUBDIR%/" so you can specify something
like "SUBDIR=x/volume18" to select the newsgroup as well as
subdirectory name.
Submitted by: "distfiles" fenner
(8) Other misc. master site cleanup.
Submitted by: "distfiles" fenner
(9) New target "maintainer". I intend to use it to auto-mail failure
build failure notices to the maintainer.
than ".so". The old extension conflicted with well-established
naming conventions for dynamically loadable modules.
The "clean" targets continue to remove ".so" files too, to deal with
old systems.
don't recurse in "make describe". The new INDEX target in
ports/Makefile invokes a perl script to recurse and convert them
into package names.
While I'm here, change the name of targets and move them around a
little bit for the sake of consistency.
It is also probably worth noting here that the meaning of the
"build dependency" list in INDEX has been changed slightly
changed. The old list was "build depends and its build depends"
-- not particularly useful if you had things like autoconf, which
run-depend on gm4 (you install all the things listed here and
you'll get an autoconf that won't run).
It is now "build depends and its run depends" -- you install
everything listed here, and you'll be able to build the port.
Submitted by: steve
(0') Fast README.html generation. It uses ports/INDEX to find
dependencies instead of embarking on to a recursive loop.
Submitted by: steve
(1) Remove NO_WRKDIR and NO_EXTRACT. Their functionality are easily
replacable with NO_WRKSUBDIR=t and EXTRACT_ONLY= (nothing on right
side), and they get in the way of read-only port trees.
(2) Surround first few variable definitions with ".if !defined()".
This will make cross-compilation easier and also speed up make
processes.
(3) Call sysctl with absolute path. Prefer the one in /sbin over the
one in /usr/sbin.
(4) Add four new variables
PKGINSTALL?= ${PKGDIR}/INSTALL
PKGDEINSTALL?= ${PKGDIR}/DEINSTALL
PKGREQ?= ${PKGDIR}/REQ
PKGMESSAGE?= ${PKGDIR}/MESSAGE
and use them in PKG_ARGS. Frobbing with PKG_ARGS directly is
strongly discouraged.
(5) Change PKG_SUFX to ".tar" (instead of ".tgz") if PKG_NOCOMPRESS is
defined. This is intended only for our own use.
(6) Add more sites to MASTER_SITE_GNU.
Submitted by: billf
(7) Override MANUAL_PACKAGE_BUILD if PARALLEL_PACKAGE_BUILD is
defined. This is intended only for our own use.
(8) Add new target "ignorelist" which will print out the package name
if the port is not going to be built on this machine. This is
intended only for our own use.
(9) Make mtree a little quieter.
