pointer types, and remove a huge number of casts from code using it.
Change struct xfile xf_data to xun_data (ABI is still compatible).
If we need to add a #define for f_data and xf_data we can, but I don't
think it will be necessary. There are no operational changes in this
commit.
padding is not specific to non-i386 architectures. It is
caused by non-i386 specific alignment requirements of
fs_swuid,
o Add a CTASSERT to catch a change in the size of struct fs
at compile-time rather than run-time.
Ok'd: gordon
Tested on: i386 ia64
will be used to support volume names with the help of a GEOM module (to be
committed). uuid will be used to deal with conflicting volume names (which
doesn't work just yet).
Approved by: mckusick@
repeatedly truncate the same file. Each time the file is truncated,
a buffer is grabbed to store the indirect block numbers that need
to be freed. Those blocks cannot be freed until the inode claiming
them is written to disk. Thus, the number of buffers being held by
soft updates explodes and in extreme cases can run the kernel out
of buffers. The problem can be avoided by doing an fsync on the
file every debug.maxindirdep truncates (currently defaulted to 50).
The fsync causes the inode to be written so that the held buffers
can be freed. The check for excessive buffers is checked as part
of the existing hook for excessive dependencies (softdep_slowdown)
in the truncate code.
Reported by: David Schultz <dschultz@uclink.Berkeley.EDU>
Sponsored by: DARPA & NAI Labs.
MFC after: 3 weeks
to sort out disk-io from file-io in the vm/buffer/filesystem space.
The intent is to sort VOP_STRATEGY calls into those which operate
on "real" vnodes and those which operate on VCHR vnodes. For
the latter kind, the call will be changed to VOP_SPECSTRATEGY,
possibly conditionally for those places where dual-use happens.
Add a default VOP_SPECSTRATEGY method which will call the normal
VOP_STRATEGY. First time it is called it will print debugging
information. This will only happen if a normal vnode is passed
to VOP_SPECSTRATEGY by mistake.
Add a real VOP_SPECSTRATEGY in specfs, which does what VOP_STRATEGY
does on a VCHR vnode today.
Add a new VOP_STRATEGY method in specfs to catch instances where
the conversion to VOP_SPECSTRATEGY has not yet happened. Handle
the request just like we always did, but first time called print
debugging information.
Apart up to two instances of console messages per boot, this amounts
to a glorified no-op commit.
If you get any of the messages on your console I would very much
like a copy of them mailed to phk@freebsd.org
kern/vfs_defaults.c it is wrong for the individual filesystems to use
the std* functions as that prevents override of the default.
Found by: src/tools/tools/vop_table
this was causing filedesc work to be very painful.
In order to make this work split out sigio definitions to thier own header
(sigio.h) which is included from proc.h for the time being.
Remove the malloctype from the ufs mount structure, instead add a callback
to the storage method for freeing inodes: UFS_IFREE().
Add vfs_ifree() method function which frees an inode.
Unvariablelize the malloc type used for allocating inodes.
so as to work correctly on 64-bit platforms.
Reported-by: Jake Burkholder <jake@locore.ca>
Sponsored by: DARPA & NAI Labs.
Approved by: Ian Dowse <iedowse@maths.tcd.ie>
that were copied in all of the earlier snapshots, thus its precomputed
list must be used in the copyonwrite test. Using incomplete lists may
lead to deadlock. Also do not include the blocks used for the indirect
pointers in the indirect pointers as this may lead to inconsistent
snapshots.
Sponsored by: DARPA & NAI Labs.
Approved by: re
previously allocated block as the previous use of the block may
have fallen out of the cache. Failure to reread its contents cause
zeroed results to be written instead of the proper contents.
Conversely, when the block is going to be entirely filled in, it
is not necessary reread the old contents.
Sponsored by: DARPA & NAI Labs.
Approved by: re
converting from individual vnode locks to the snapshot
lock, be sure to pass any waiting processes along to the
new lock as well. This transfer is done by a new function
in the lock manager, transferlockers(from_lock, to_lock);
Thanks to Lamont Granquist <lamont@scriptkiddie.org> for
his help in pounding on snapshots beyond all reason and
finding this deadlock.
Sponsored by: DARPA & NAI Labs.
1) Release the snapshot file lock while suspending the system. Otherwise
a process trying to read the lock may block on its containing directory
preventing the suspension from completing. Thanks to Sean Kelly
<smkelly@zombie.org> for finding this deadlock.
2) Replace some bdwrite's with bawrite's so as not to fill all the
buffers with dirty data. The buffers could not be cleaned as the
snapshot vnode was locked hence the system could deadlock when
making snapshots of really massive filesystems. Thanks to
Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> for figuring
this out.
Sponsored by: DARPA & NAI Labs.
before using it to write the superblock. This is to guard against
accidentally trashing the disklabel if the superblock format missed
being upgraded by the new kernel.
Reported by: Sam Leffler <sam@errno.com>
Sponsored by: DARPA & NAI Labs.
Approved by: Murray Stokely <murray@FreeBSD.org>
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.
Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.
Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by: DARPA & NAI Labs.
in half because of reports that under heavy load the kernel could
exhaust its memory pool. The limit is now (desiredvnodes * 4)
rather than (desiredvnodes * 8), so it will still scale with
larger systems, just not as quickly.
Sponsored by: DARPA & NAI Labs.
not have hit the disk and the dependencies cannot be unrolled.
In this case, the system will mark the buffer as dirty again so
that the write can be retried in the future. When the write
succeeds or the system gives up on the buffer and marks it as
invalid (B_INVAL), the dependencies will be cleared.
Sponsored by: DARPA & NAI Labs.
"refreshing" the label on the vnode before use, just get the label
right from inception. For single-label file systems, set the label
in the generic VFS getnewvnode() code; for multi-label file systems,
leave the labeling up to the file system. With UFS1/2, this means
reading the extended attribute during vfs_vget() as the inode is
pulled off disk, rather than hitting the extended attributes
frequently during operations later, improving performance. This
also corrects sematics for shared vnode locks, which were not
previously present in the system. This chances the cache
coherrency properties WRT out-of-band access to label data, but in
an acceptable form. With UFS1, there is a small race condition
during automatic extended attribute start -- this is not present
with UFS2, and occurs because EAs aren't available at vnode
inception. We'll introduce a work around for this shortly.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
check for and/or report I/O errors. The result is that a VFS_SYNC
or VOP_FSYNC called with MNT_WAIT could loop infinitely on ufs in
the presence of a hard error writing a disk sector or in a filesystem
full condition. This patch ensures that I/O errors will always be
checked and returned. This patch also ensures that every call to
VFS_SYNC or VOP_FSYNC with MNT_WAIT set checks for and takes
appropriate action when an error is returned.
Sponsored by: DARPA & NAI Labs.
the ffs_copyonwrite routine to avoid a deadlock between the syncer
daemon trying to sync out a snapshot vnode and the bufdaemon
trying to write out a buffer containing the snapshot inode.
With any luck this will be the last snapshot race condition.
Sponsored by: DARPA & NAI Labs.
a full filesystem. Previously, if the allocation failed, we had to
fsync the file before rolling back any partial allocation of indirect
blocks. Most block allocation requests only need to allocate a single
data block and if that allocation fails, there is nothing to unroll.
So, before doing the fsync, we check to see if any rollback will
really be necessary. If none is necessary, then we simply return.
This update eliminates the flurry of disk activity that got triggered
whenever a filesystem would run out of space.
Sponsored by: DARPA & NAI Labs.
that works in the new threaded kernel. It was commented out of
the disksort routine earlier this year for the reasons given in
kern/subr_disklabel.c (which is where this code used to reside
before it moved to kern/subr_disk.c):
----------------------------
revision 1.65
date: 2002/04/22 06:53:20; author: phk; state: Exp; lines: +5 -0
Comment out Kirks io-request priority hack until we can do this in a
civilized way which doesn't cause grief.
The problem is that it is not generally safe to cast a "struct bio
*" to a "struct buf *". Things like ccd, vinum, ata-raid and GEOM
constructs bio's which are not entrails of a struct buf.
Also, curthread may or may not have anything to do with the I/O request
at hand.
The correct solution can either be to tag struct bio's with a
priority derived from the requesting threads nice and have disksort
act on this field, this wouldn't address the "silly-seek syndrome"
where two equal processes bang the diskheads from one edge to the
other of the disk repeatedly.
Alternatively, and probably better: a sleep should be introduced
either at the time the I/O is requested or at the time it is completed
where we can be sure to sleep in the right thread.
The sleep also needs to be in constant timeunits, 1/hz can be practicaly
any sub-second size, at high HZ the current code practically doesn't
do anything.
----------------------------
As suggested in this comment, it is no longer located in the disk sort
routine, but rather now resides in spec_strategy where the disk operations
are being queued by the thread that is associated with the process that
is really requesting the I/O. At that point, the disk queues are not
visible, so the I/O for positively niced processes is always slowed
down whether or not there is other activity on the disk.
On the issue of scaling HZ, I believe that the current scheme is
better than using a fixed quantum of time. As machines and I/O
subsystems get faster, the resolution on the clock also rises.
So, ten years from now we will be slowing things down for shorter
periods of time, but the proportional effect on the system will
be about the same as it is today. So, I view this as a feature
rather than a drawback. Hence this patch sticks with using HZ.
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@critter.freebsd.dk>
_POSIX_MAC_PRESENT based on available mount flags, if the services are
available.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
of a file in chunks that are less then the filesystem block size, if the
data is not already cached the system will perform a read-before-write.
The problem is that it does this on a block-by-block basis, breaking up the
I/Os and making clustering impossible for the writes. Programs such
as INN using cyclic file buffers suffer greatly. This problem is only going
to get worse as we use larger and larger filesystem block sizes.
The solution is to extend the sequential heuristic so UFS[2] can perform
a far larger read and readahead when dealing with this case.
(note: maximum disk write bandwidth is 27MB/sec thru filesystem)
(note: filesystem blocksize in test is 8K (1K frag))
dd if=/dev/zero of=test.dat bs=1k count=2m conv=notrunc
Before: (note half of these are reads)
tty da0 da1 acd0 cpu
tin tout KB/t tps MB/s KB/t tps MB/s KB/t tps MB/s us ni sy in id
0 76 14.21 598 8.30 0.00 0 0.00 0.00 0 0.00 0 0 7 1 92
0 76 14.09 813 11.19 0.00 0 0.00 0.00 0 0.00 0 0 9 5 86
0 76 14.28 821 11.45 0.00 0 0.00 0.00 0 0.00 0 0 8 1 91
After: (note half of these are reads)
tty da0 da1 acd0 cpu
tin tout KB/t tps MB/s KB/t tps MB/s KB/t tps MB/s us ni sy in id
0 76 63.62 434 26.99 0.00 0 0.00 0.00 0 0.00 0 0 18 1 80
0 76 63.58 424 26.30 0.00 0 0.00 0.00 0 0.00 0 0 17 2 82
0 76 63.82 438 27.32 0.00 0 0.00 0.00 0 0.00 1 0 19 2 79
Reviewed by: mckusick
Approved by: re
X-MFC after: immediately (was heavily tested in -stable for 4 months)
is required to use EAs with UFS2, and that UFS2 is recommend for EA use
for a variety of reasons.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
note that UFS2 doesn't require explicit extended attribute configuration,
and is recommends for this and other reasons if you plan to use ACLs.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
a common lock. This change avoids a deadlock between snapshots when
separate requests cause them to deadlock checking each other for a
need to copy blocks that are close enough together that they fall
into the same indirect block. Although I had anticipated a slowdown
from contention for the single lock, my filesystem benchmarks show
no measurable change in throughput on a uniprocessor system with
three active snapshots. I conjecture that this result is because
every copy-on-write fault must check all the active snapshots, so
the process was inherently serial already. This change removes the
last of the deadlocks of which I am aware in snapshots.
Sponsored by: DARPA & NAI Labs.
to be administratively disabled as needed on UFS/UFS2 file systems. This
also has the effect of preventing the slightly more expensive ACL code
from running on non-ACL file systems, avoiding storage allocation for
ACLs that may be read from disk. MNT_ACLS may be set at mount-time
using mount -o acls, or implicitly by setting the FS_ACLS flag using
tunefs. On UFS1, you may also have to configure ACL store.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
automatically set MNT_MULTILABEL in the mount flags.
If FS_ACLS is set in a UFS or UFS2 superblock, automatically
set MNT_ACLS in the mount flags.
If either of these flags is set, but the appropriate kernel option
to support the features associated with the flag isn't available,
then print a warning at mount-time.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
or fifo in UFS2, the normal ufs_strategy routine needs to be used
rather than the spec_strategy or fifo_strategy routine. Thus the
ffsext_strategy routine is interposed in the ffs_vnops vectors for
special devices and fifo's to pick off this special case. Otherwise
it simply falls through to the usual spec_strategy or fifo_strategy
routine.
Submitted by: Robert Watson <rwatson@FreeBSD.org>
Sponsored by: DARPA & NAI Labs.
if failures occur, make sure that we release both the default ACL
and access ACL storage during new object creation.
Spotted by: phk and his pet flexelint
Sponsored by: DARPA, Network Associates Laboratories
FS_ACLS Administrative enable/disable of extended ACL support
FS_MULTILABEL Administrative flag to indicate to the MAC Framework
that objects in the file system are individually
labeled using extended attributes.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Reviewed by: (in principal) mckusick, phk
that use it. Specifically, vop_stdlock uses the lock pointed to by
vp->v_vnlock. By default, getnewvnode sets up vp->v_vnlock to
reference vp->v_lock. Filesystems that wish to use the default
do not need to allocate a lock at the front of their node structure
(as some still did) or do a lockinit. They can simply start using
vn_lock/VOP_UNLOCK. Filesystems that wish to manage their own locks,
but still use the vop_stdlock functions (such as nullfs) can simply
replace vp->v_vnlock with a pointer to the lock that they wish to
have used for the vnode. Such filesystems are responsible for
setting the vp->v_vnlock back to the default in their vop_reclaim
routine (e.g., vp->v_vnlock = &vp->v_lock).
In theory, this set of changes cleans up the existing filesystem
lock interface and should have no function change to the existing
locking scheme.
Sponsored by: DARPA & NAI Labs.
Whenever doing a copy-on-write check, first look in the list of
initially allocated blocks to see if it is there. If so, no further
check is needed. If not, fall through and do the full check. This
change eliminates one of two known deadlocks caused by snapshots.
Handling the second deadlock will be the subject of another check-in.
This change also reduces the cost of the copy-on-write check by
speeding up the verification of frequently checked blocks.
Sponsored by: DARPA & NAI Labs.
Whenever doing a copy-on-write check, first look in the list of
initially allocated blocks to see if it is there. If so, no further
check is needed. If not, fall through and do the full check. This
change eliminates one of two known deadlocks caused by snapshots.
Handling the second deadlock will be the subject of another check-in.
This change also reduces the cost of the copy-on-write check by
speeding up the verification of frequently checked blocks.
Sponsored by: DARPA & NAI Labs.
even when the underlying device has a larger sector size. Therefore,
the filesystem code should not (and with this patch does not) try to
use the underlying sector size when doing disk block address calculations.
This patch fixes problems in -current when using the swap-based
memory-disk device (mdconfig -a -t swap ...). This bugfix is not
relevant to -stable as -stable does not have the memory-disk device.
Sponsored by: DARPA & NAI Labs.
wasn't doing. Rather than just lock and unlock the vnode around the call
to VOP_FSYNC(), implement rwatson's suggestion to lock the file vnode
in kern_link() before calling VOP_LINK(), since the other filesystems
also locked the file vnode right away in their link methods. Remove the
locking and and unlocking from the leaf filesystem link methods.
Reviewed by: rwatson, bde (except for the unionfs_link() changes)
v_tag is now const char * and should only be used for debugging.
Additionally:
1. All users of VT_NTS now check vfsconf->vf_type VFCF_NETWORK
2. The user of VT_PROCFS now checks for the new flag VV_PROCDEP, which
is propagated by pseudofs to all child vnodes if the fs sets PFS_PROCDEP.
Suggested by: phk
Reviewed by: bde, rwatson (earlier version)
Changed rename(2) to follow the letter of the POSIX spec. POSIX
requires rename() to have no effect if its args "resolve to the same
existing file". I think "file" can only reasonably be read as referring
to the inode, although the rationale and "resolve" seem to say that
sameness is at the level of (resolved) directory entries.
ext2fs_vnops.c, ufs_vnops.c:
Replaced code that gave the historical BSD behaviour of removing one
link name by checks that this code is now unreachable. This fixes
some races. All vnodes needed to be unlocked for the removal, and
locking at another level using something like IN_RENAME was not even
attempted, so it was possible for rename(x, y) to return with both x
and y removed even without any unlink(2) syscalls (one process can
remove x using rename(x, y) and another process can remove y using
rename(y, x)).
Prodded by: alfred
MFC after: 8 weeks
PR: 42617
layers deep in <sys/proc.h> or <sys/vnode.h>.
Include <sys/vmmeter.h> instead of depending on namespace pollution in
<sys/pcpu.h>.
Sorted includes as much as possible.
pmap_zero_page() and pmap_zero_page_area() were modified to accept
a struct vm_page * instead of a physical address, vm_page_zero_fill()
and vm_page_zero_fill_area() have served no purpose.
make a series of modifications to the credential arguments relating
to file read and write operations to cliarfy which credential is
used for what:
- Change fo_read() and fo_write() to accept "active_cred" instead of
"cred", and change the semantics of consumers of fo_read() and
fo_write() to pass the active credential of the thread requesting
an operation rather than the cached file cred. The cached file
cred is still available in fo_read() and fo_write() consumers
via fp->f_cred. These changes largely in sys_generic.c.
For each implementation of fo_read() and fo_write(), update cred
usage to reflect this change and maintain current semantics:
- badfo_readwrite() unchanged
- kqueue_read/write() unchanged
pipe_read/write() now authorize MAC using active_cred rather
than td->td_ucred
- soo_read/write() unchanged
- vn_read/write() now authorize MAC using active_cred but
VOP_READ/WRITE() with fp->f_cred
Modify vn_rdwr() to accept two credential arguments instead of a
single credential: active_cred and file_cred. Use active_cred
for MAC authorization, and select a credential for use in
VOP_READ/WRITE() based on whether file_cred is NULL or not. If
file_cred is provided, authorize the VOP using that cred,
otherwise the active credential, matching current semantics.
Modify current vn_rdwr() consumers to pass a file_cred if used
in the context of a struct file, and to always pass active_cred.
When vn_rdwr() is used without a file_cred, pass NOCRED.
These changes should maintain current semantics for read/write,
but avoid a redundant passing of fp->f_cred, as well as making
it more clear what the origin of each credential is in file
descriptor read/write operations.
Follow-up commits will make similar changes to other file descriptor
operations, and modify the MAC framework to pass both credentials
to MAC policy modules so they can implement either semantic for
revocation.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
parts rather than use vop_{read,write}_args. Access to these
functions will ultimately not be available through the
"vop_{read,write}+IO_EXT" API but this functionality is retained
for debugging purposes for now.
Sponsored by: DARPA & NAI Labs.
UFS only thing, and FFS should in principle not know if it is enabled
or not.
This commit cleans ffs_vnops.c for such knowledge, but not ffs_vfsops.c
Sponsored by: DARPA and NAI Labs.
these in the main filesystems. This does not change the resulting code
but makes the source a little bit more grepable.
Sponsored by: DARPA and NAI Labs.
enforcement of MAC policy on the read or write operations:
- In ext2fs, don't enforce MAC on loop-back reads and writes supporting
directory read operations in lookup(), directory modifications in
rename(), directory write operations in mkdir(), symlink write
operations in symlink().
- In the NFS client locking code, perform vn_rdwr() on the NFS locking
socket without enforcing MAC, since the write is done on behalf of
the kernel NFS implementation rather than the user process.
- In UFS, don't enforce MAC on loop-back reads and writes supporting
directory read operations in lookup(), and symlink write operations
in symlink().
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
- v_vflag is protected by the vnode lock and is used when synchronization
with VOP calls is needed.
- v_iflag is protected by interlock and is used for dealing with vnode
management issues. These flags include X/O LOCK, FREE, DOOMED, etc.
- All accesses to v_iflag and v_vflag have either been locked or marked with
mp_fixme's.
- Many ASSERT_VOP_LOCKED calls have been added where the locking was not
clear.
- Many functions in vfs_subr.c were restructured to provide for stronger
locking.
Idea stolen from: BSD/OS
kernel access control.
Instrument UFS to support per-inode MAC labels. In particular,
invoke MAC framework entry points for generically supporting the
backing of MAC labels into extended attributes. This ends up
introducing new vnode operation vector entries point at the MAC
framework entry points, as well as some explicit entry point
invocations for file and directory creation events so that the
MAC framework can push labels to disk before the directory names
become persistent (this will work better once EAs in UFS2 are
hooked into soft updates). The generic EA MAC entry points
support executing with the file system in either single label
or multilabel operation, and will fall back to the mount label
if multilabel is not specified at mount-time.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
As this code is not actually used by any of the existing
interfaces, it seems unlikely to break anything (famous
last words).
The internal kernel interface to manipulate these attributes
is invoked using two new IO_ flags: IO_NORMAL and IO_EXT.
These flags may be specified in the ioflags word of VOP_READ,
VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that
you want to do I/O to the normal data part of the file and
IO_EXT means that you want to do I/O to the extended attributes
part of the file. IO_NORMAL and IO_EXT are mutually exclusive
for VOP_READ and VOP_WRITE, but may be specified individually
or together in the case of VOP_TRUNCATE. For example, when
removing a file, VOP_TRUNCATE is called with both IO_NORMAL
and IO_EXT set. For backward compatibility, if neither IO_NORMAL
nor IO_EXT is set, then IO_NORMAL is assumed.
Note that the BA_ and IO_ flags have been `merged' so that they
may both be used in the same flags word. This merger is possible
by assigning the IO_ flags to the low sixteen bits and the BA_
flags the high sixteen bits. This works because the high sixteen
bits of the IO_ word is reserved for read-ahead and help with
write clustering so will never be used for flags. This merge
lets us get away from code of the form:
if (ioflags & IO_SYNC)
flags |= BA_SYNC;
For the future, I have considered adding a new field to the
vattr structure, va_extsize. This addition could then be
exported through the stat structure to allow applications to
find out the size of the extended attribute storage and also
would provide a more standard interface for truncating them
(via VOP_SETATTR rather than VOP_TRUNCATE).
I am also contemplating adding a pathconf parameter (for
concreteness, lets call it _PC_MAX_EXTSIZE) which would
let an application determine the maximum size of the extended
atribute storage.
Sponsored by: DARPA & NAI Labs.
support creation times such as UFS2) to the value of the
modification time if the value of the modification time is older
than the current creation time. See utimes(2) for further details.
Sponsored by: DARPA & NAI Labs.
direct calls for the two places where the kernel calls into soft
updates code. Set up the hooks in softdep_initialize() and NULL
them out in softdep_uninitialize(). This change allows soft updates
to function correctly when ufs is loaded as a module.
Reviewed by: mckusick
module. This adds an ffs_uninit() function that calls ufs_uninit()
and also calls a new softdep_uninitialize() function. Add a stub
for softdep_uninitialize() to cover the non-SOFTUPDATES case.
Reviewed by: mckusick
imposed by the filesystem structure itself remains. With 16k blocks,
the maximum file size is now just over 128TB.
For now, the UFS1 file size limit is left unchanged so as to remain
consistent with RELENG_4, but it too could be removed in the future.
Reviewed by: mckusick
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
out of inodes in a cylinder group would fail to check for
free inodes in other cylinder groups. This bug was introduced
in the UFS2 code merge two days ago.
An inode is allocated by calling ffs_valloc which calls
ffs_hashalloc to do the filesystem scan. Ffs_hashalloc
walks around the cylinder groups calling its passed allocator
(ffs_nodealloccg in this case) until the allocator returns a
non-zero result. The bug is that ffs_hashalloc expects the
passed allocator function to return a 64-bit ufs2_daddr_t.
When allocating inodes, it calls ffs_nodealloccg which was
returning a 32-bit ino_t. The ffs_hashalloc code checked
a 64-bit return value and usually found random non-zero bits in
the high 32-bits so decided that the allocation had succeeded
(in this case in the only cylinder group that it checked).
When the result was passed back to ffs_valloc it looked at
only the bottom 32-bits, saw zero and declared the system
out of inodes. But ffs_hashalloc had really only checked
one cylinder group.
The fix is to change ffs_nodealloccg to return 64-bit results.
Sponsored by: DARPA & NAI Labs.
Submitted by: Poul-Henning Kamp <phk@critter.freebsd.dk>
Reviewed by: Maxime Henrion <mux@freebsd.org>
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
in a user process gaining visibility into the 'old' contents of a filesystem
block. There were two cases: (1) when uiomove() fails (user process issues
illegal write), and (2) when uiomove() overlaps a mmap() of the same file at
the same offset (fault -> recursive buffer I/O reads contents of old block).
Unfortunately 1.72 also had the unintended effect of forcing the filesystem
to do a read-before-write in the case of a full-block-write (non append case),
e.g. 'dd if=/dev/zero of=test.dat bs=1m count=256 conv=notrunc'. This
destroys performance.. not only is a read forced for every write, but
clustering breaks as well.
The solution is to clear the buffer manually in the full-block case rather
then asking BALLOC to do it (BALLOC issues the read-before-write). In the
partial-block case we want BALLOC to do it because the read-before-write
is necessary. This patch should greatly improve database and news-feed
server performance.
Found by: MKI <mki@mozone.net>
MFC after: 3 days
vnode creation globaly, we allow processes to create vnodes concurently.
In case of concurent creation of vnode for the one ino, we allow processes
to race and then check who wins.
Assuming that concurent creation of vnode for same ino is really rare case,
this is belived to be an improvement, as it just allows concurent creation
of vnodes.
Idea by: bp
Reviewed by: dillon
MFC after: 1 month
IFS had its fingers deep in the belly of the UFS/FFS split. IFS
will be reimplemented by the maintainer at a later date.
Requested by: adrian (maintainer)
Replace with kevent(2) ops.
This is untested, but the code would rot even further if this wasn't
applied. I've chosen to apply this to prompt some cleanup.
Submitted by: bde
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.
Tested on: i386, alpha, sparc64
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.
Discussed on: smp@
provided the latter is nonzero. At this point, the former is a fairly
arbitrary default value (DFTPHYS), so changing it to any reasonable
value specified by the device driver is safe. Using the maximum of
these limits broke ffs clustered i/o for devices whose si_iosize_max
is < DFLTPHYS. Using the minimum would break device drivers' ability
to increase the active limit from DFTLPHYS up to MAXPHYS.
Copied the code for this and the associated (unnecessary?) fixup of
mp_iosize_max to all other filesystems that use clustering (ext2fs and
msdosfs). It was completely missing.
PR: 36309
MFC-after: 1 week
improvements.
1) If deleting an entry results in a chain of deleted slots ending in an
empty slot, then we can be a bit more aggressive about marking slots as
empty.
2) The last stage of the FNV hash is to xor the last byte of data
into the hash. This means that filenames which differ only in
the last byte will be placed close to one another in the hash
table, which forms longer chains. To work around this common
case, we also hash in the address of the dirhash structure.
news/cancel = news/articles/control/cancel for a tradspool inn server
squid2 = squid level 2 directory (dirs called 00->FF)
squid3 = squid level 3 directory (files called 00001F00->00001FFF)
mean #probes for
home dir mh inbox news/cancel tmp squid2 squid3
old successful 1.02 3.19 4.07 1.10 7.85 2.06
new successful 1.04 1.32 1.27 1.04 1.93 1.17
old unsuccessful 1.08 4.50 5.37 1.17 10.76 2.69
new unsuccessful 1.08 1.73 1.64 1.17 2.89 1.37
Reviewed by: iedowse
MFC after: 2 weeks
locking flags when acquiring a vnode. The immediate purpose is
to allow polling lock requests (LK_NOWAIT) needed by soft updates
to avoid deadlock when enlisting other processes to help with
the background cleanup. For the future it will allow the use of
shared locks for read access to vnodes. This change touches a
lot of files as it affects most filesystems within the system.
It has been well tested on FFS, loopback, and CD-ROM filesystems.
only lightly on the others, so if you find a problem there, please
let me (mckusick@mckusick.com) know.
the bio and buffer structures to have daddr64_t bio_pblkno,
b_blkno, and b_lblkno fields which allows access to disks
larger than a Terabyte in size. This change also requires
that the VOP_BMAP vnode operation accept and return daddr64_t
blocks. This delta should not affect system operation in
any way. It merely sets up the necessary interfaces to allow
the development of disk drivers that work with these larger
disk block addresses. It also allows for the development of
UFS2 which will use 64-bit block addresses.
update the free-space statistics in some cases. The problem affected
directory blocks when the free space dropped below the size of the
maximum allowed entry size. When this happened, the free-space
summary information could claim that there are no further blocks
that can fit a maximum-size entry, even if there are.
The effect of this bug is that the directory may be enlarged even
though there is space within the directory for the new entry. This
wastes disk space and has a negative impact on performance.
Fix it by correctly computing the dh_firstfree array index, adding
a helper macro for clarity. Put an extra sanity check into
ufsdirhash_checkblock() to detect the situation in future.
Found by: dwmalone
Reviewed by: dwmalone
MFC after: 1 week
read-only.
The trouble here is that we don't reopen the device in read/write mode
when we remount in read/write mode resulting in a filesystem sending
write requests to a device which was only opened read/only.
I'm not quite sure how such a reopen would best be done and defer
the problem to more agile hackers.
and isn't strictly required. However, it lowers the number of false
positives found when grep'ing the kernel sources for p_ucred to ensure
proper locking.
Remove bowrite(), it is now unused.
This is the first step in getting entirely rid of BIO_ORDERED which is
a generally accepted evil thing.
Approved by: mckusick
The use of the zone allocator may or may not be overkill.
There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need
to revisit.
This shaves about 60 bytes of struct vnode which on my laptop means
600k less RAM used for vnodes.
o Modify the system call syntax for extattr_{get,set}_{fd,file}() so
as not to use the scatter gather API (which appeared not to be used
by any consumers, and be less portable), rather, accepts 'data'
and 'nbytes' in the style of other simple read/write interfaces.
This changes the API and ABI.
o Modify system call semantics so that extattr_get_{fd,file}() return
a size_t. When performing a read, the number of bytes read will
be returned, unless the data pointer is NULL, in which case the
number of bytes of data are returned. This changes the API only.
o Modify the VOP_GETEXTATTR() vnode operation to accept a *size_t
argument so as to return the size, if desirable. If set to NULL,
the size will not be returned.
o Update various filesystems (pseodofs, ufs) to DTRT.
These changes should make extended attributes more useful and more
portable. More commits to rebuild the system call files, as well
as update userland utilities to follow.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
inode'' panic. This change corrects that problem by setting the
fs_active flag when the inode map changes to notify the snapshot
code that the cylinder group must be rescanned.
Submitted by: Robert Watson <rwatson@FreeBSD.org>
without being reclaimed. This bug was introduced in revision 1.95
dealing with filenames placed in newly allocated directory blocks,
thus is not present in 4.X systems. The bug is triggered when a
new entry is made in a directory after the data block containing
the original new entry has been written, but before the inode
that references the data block has been written.
Submitted by: Bill Fenner <fenner@research.att.com>
been unlinked (e.g., with a zero link count). We have to expunge
all trace of these files from the snapshot so that they are neither
reclaimed prematurely by fsck nor saved unnecessarily by dump.
which small and/or nearly full filesystems would fail with `file
system full' messages when trying to replace a number of existing
files (for example during a system installation). When the allocation
routines are about to fail with a file system full condition, they
make a call to softdep_request_cleanup() which attempts to accelerate
the flushing of pending deletion requests in an effort to free up
space. In the face of filesystem I/O requests that exceed the
available disk transfer capacity, the cleanup request could take
an unbounded amount of time. Thus, the softdep_request_cleanup()
routine will only try for tickdelay seconds (default 2 seconds)
before giving up and returning a filesystem full error. Under typical
conditions, the softdep_request_cleanup() routine is able to free
up space in under fifty milliseconds.
which caused incomplete snapshots to be taken. When background
fsck would run on these snapshots, the result would be files
being incorrectly released which would subsequently panic the
kernel with ``handle_workitem_freefile: inodedep survived'',
``handle_written_inodeblock: live inodedep'', and
``handle_workitem_remove: lost inodedep'' errors.
involving file removal or file update were not always being fully
committed to disk. The result was lost files or corrupted file data.
This change ensures that the filesystem is properly synced to disk
before the filesystem is down-graded.
This delta also fixes a long standing bug in which a file open for
reading has been unlinked. When the last open reference to the file
is closed, the inode is reclaimed by the filesystem. Previously,
if the filesystem had been down-graded to read-only, the inode could
not be reclaimed, and thus was lost and had to be later recovered
by fsck. With this change, such files are found at the time of the
down-grade. Normally they will result in the filesystem down-grade
failing with `device busy'. If a forcible down-grade is done, then
the affected files will be revoked causing the inode to be released
and the open file descriptors to begin failing on attempts to read.
Submitted by: "Sam Leffler" <sam@errno.com>
Seigo Tanimura (tanimura) posted the initial delta.
I've polished it quite a bit reducing the need for locking and
adapting it for KSE.
Locks:
1 mutex in each filedesc
protects all the fields.
protects "struct file" initialization, while a struct file
is being changed from &badfileops -> &pipeops or something
the filedesc should be locked.
1 mutex in each struct file
protects the refcount fields.
doesn't protect anything else.
the flags used for garbage collection have been moved to
f_gcflag which was the FILLER short, this doesn't need
locking because the garbage collection is a single threaded
container.
could likely be made to use a pool mutex.
1 sx lock for the global filelist.
struct file * fhold(struct file *fp);
/* increments reference count on a file */
struct file * fhold_locked(struct file *fp);
/* like fhold but expects file to locked */
struct file * ffind_hold(struct thread *, int fd);
/* finds the struct file in thread, adds one reference and
returns it unlocked */
struct file * ffind_lock(struct thread *, int fd);
/* ffind_hold, but returns file locked */
I still have to smp-safe the fget cruft, I'll get to that asap.
lost if some other process uses the lock while we are sleeping. We
restore it after we have slept. This functionality is provided by
a new routine interlocked_sleep() that wraps the interlocking with
functions that sleep. This function is then used in place of the
old ACQUIRE_LOCK_INTERLOCKED() and FREE_LOCK_INTERLOCKED() macros.
Submitted by: Debbie Chu <dchu@juniper.net>
in softdep_sync_metadata(). Otherwise we may miss dependencies
that need to be flushed which will result in a later panic
with the message ``vinvalbuf: dirty bufs''.
Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
MFC after: 1 week
been removed from the cache-list as part of a previous unmount.
This would result in panics (page fault in dqflush()) during subsequent
umounts provided that enough distinct UID's to actually make the
hash do something are active.
This can probably explain a number of weird quota related behaviours.
PR: 32331 maybe more.
Reproduced by: Søren Schrørder <sch@cybercity.dk>
against VM_WAIT in the pageout code. Both fixes involve adjusting
the lockmgr's timeout capability so locks obtained with timeouts do not
interfere with locks obtained without a timeout.
Hopefully MFC: before the 4.5 release
superblock that is already set up to handle pointer types. This
fixes an accidental change in the superblock size on 64-bit platforms
caused by revision 1.24.
when taking a snapshot. The two time consuming operations are
scanning all the filesystem bitmaps to determine which blocks
are in use and scanning all the other snapshots so as to be able
to expunge their blocks from the view of the current snapshot.
The bitmap scanning is broken into two passes. Before suspending
the filesystem all bitmaps are scanned. After the suspension,
those bitmaps that changed after being scanned the first time
are rescanned. Typically there are few bitmaps that need to be
rescanned. The expunging of other snapshots is now done after
the suspension is released by observing that we can easily
identify any blocks that were allocated to them after the
suspension (they will be maked as `not needing to be copied'
in the just created snapshot). For all the gory details, see
the ``Running fsck in the Background'' paper in the Usenix
BSDCon 2002 Conference Proceedings, pages 55-64.
new file end will land in the middle of a file hole. Since the last
block of a file must always be allocated, the hole is filled by
allocating a block at that location. If the hole being filled is
a direct block, then the truncation may eventually reduce the
full sized block down to a fragment. When running with soft
updates, it is necessary to FSYNC the file after allocating the
block and before creating the fragment to avoid triggering a
soft updates inconsistency when the block unexpectedly shrinks.
Found by: Matthew Dillon <dillon@apollo.backplane.com>
MFC after: 1 week
compare the slot offset against the predicted offset, not a boolean
flag. This typo effectively disabled the sequential optimisation,
but was otherwise harmless.
Not surprisingly, fixing this improves performance in the sequential
access case. I am seeing a 7% speedup on one machine here; using
dirhash when sequentially looking up directory entries is now about
5% faster instead of 2% slower than the non-dirhash case.
Submitted by: KOIE Hidetaka <koie@suri.co.jp>
MFC after: 1 week
in wdrain during a write. This flag needs to be used in devices whos
strategy routines turn-around and issue another high level I/O, such as
when MD turns around and issues a VOP_WRITE to vnode backing store, in order
to avoid deadlocking the dirty buffer draining code.
Remove a vprintf() warning from MD when the backing vnode is found to be
in-use. The syncer of buf_daemon could be flushing the backing vnode at
the time of an MD operation so the warning is not correct.
MFC after: 1 week
o Add reference to TrustedBSD Project in license header.
o Update dated comments, including comment in extattr.h claiming that
no file systems support extended attributes.
o Improve comment consistency.
coerces the deletion of a default ACL on a directory when no default
ACL EA is present to success. Because the UFS EA implementation doesn't
disinguish the EA failure modes "that EA name has not been
administratively enabled" from "that EA name has no defined data",
there's a potential conflict in error return values. Normally, the
lack of administratively configured EA support is coerced to
EOPNOTSUPP to indicate that ACLs are not available; in this case,
it is possible to get a successful return, even if ACLs are not
available because EA support for them has not been enabled.
Expand the comment in ufs_setacl() to identify this case.
Obtained from: TrustedBSD Project
from ufs_extattr_enable_with_open().
o Print auto-start notifications if (bootverbose). This was previously
commented out since it didn't know how to check for bootverbose.
o Drop in comments throughout indicating where ENOENT should be replaced
with ENOATTR once that is available.
Obtained from: TrustedBSD Project
implementation to replace single-character namespace prefixes, '$' is no
longer an invalid attribute name, and the namespace is relevant to
validity determination.
o Remove '$' case from ufs_extattr_valid_attrname()
o Add attrnamespace argument to ufs_extattr_valid_attrname(), and
fill out appropriately.
Currently no decisions are made based on the namespace argument, but
may be in the future.
Obtained from: TrustedBSD Project
real effect.
Optimize vfs_msync(). Avoid having to continually drop and re-obtain
mutexes when scanning the vnode list. Improves looping case by 500%.
Optimize ffs_sync(). Avoid having to continually drop and re-obtain
mutexes when scanning the vnode list. This makes a couple of assumptions,
which I believe are ok, in regards to vnode stability when the mount list
mutex is held. Improves looping case by 500%.
(more optimization work is needed on top of these fixes)
MFC after: 1 week
sanity check after every directory modification. This check can be
re-enabled at any time by setting the sysctl "vfs.ufs.dirhash_docheck"
to 1.
This group of sanity tests was there to ensure that any UFS_DIRHASH
bugs could be caught by a panic before a potentially corrupted
directory block would be written to disk. It has served its main
purpose now, so disable it in the interest of performance.
MFC after: 1 week
- crhold() returns a reference to the ucred whose refcount it bumps.
- crcopy() now simply copies the credentials from one credential to
another and has no return value.
- a new crshared() primitive is added which returns true if a ucred's
refcount is > 1 and false (0) otherwise.
because the IN_RENAME flag only fixes a few of the huge number of race
conditions that can result in the source path becoming invalid even
prior to the VOP_RENAME() call. The panics created a serious security
issue whereby an attacker could fairly easily cause the panic to
occur, crashing the machine.
The correct solution requires a great deal of work in the namei
path cache code.
MFC after: 0 days
first thought and may require serious work to the VOP_RENAME() api itself.
Basically, by the time the VOP_RENAME() function is called, it's already
too late.
- Move the SPECIAL_FLAG #define up next to the NOHOLDER #define and fix a
little nit that caused it to be defined as -(sizeof (struct thread) + 1)
instead of -2.
PRISON_ROOT to the suser_xxx() check. Since securelevels may now
be raised in specific jails, use of system flags can still be
restricted in jail(), but in a more configurable way.
o Users of jail() expecting system flags (such as schg) to restrict
jail()'s should be sure to set the securelevel appropriately in
jail()'s.
o This fixes activities involving automated system flag removal in
jail(), including installkernel and friends.
Obtained from: TrustedBSD Project
refering to securelevels; also, update the unprivileged process text
to better indicate the scope of actions permittable when any system
flags are already set (limited).
Submitted by: Udo Schweigert <udo.schweigert@siemens.com>
sizeof(struct inode) into a new malloc bucket on the i386. This
didn't happen in -current due to the removal of i_lock, but it does
no harm to apply the workaround to -current first.
Reduce the size of the i_spare[] array in struct inode from 4 to
3 entries, and change ext2fs to use i_din.di_spare[1] so that it
does not need i_spare[3].
Reviewed by: bde
MFC after: 3 days
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
an array "fs_contigdirs[]" to avoid too many directories getting
created in each cylinder group. The memory required for this and
two other arrays (fs_csp[] and fs_maxcluster[]) is allocated with
a single malloc() call, and divided up afterwards. However, the
'space' pointer is not advanced correctly, so fs_contigdirs and
fs_maxcluster end up pointing to the same address.
Add the missing code to advance the 'space' pointer, and remove
an unnecessary update of the pointer that follows.
This is likely to fix the "ffs_clusteralloc: map mismatch" panics
that have been reported recently.
Submitted by: Luke Mewburn <lukem@wasabisystems.com>
in got a bit broken, when ufs_extattr_stop() was called and failed,
ufs_extattr_destroy() would panic. This makes the call to destroy()
conditional on the success of stop().
Submitted by: Christian Carstensen <cc@devcon.net>
Obtained from: TrustedBSD Project
file. ffs will discard any pending dirty pages when it is closed,
so we may as well not waste time trying to clean them. This doesn't
stop other things from writing it out, eg: pageout, fsync(2) etc.
never attempt to hash directories once they are deleted. This fixes
a problem where operations on a deleted directory could trigger
dirhash sanity panics.
to supply the number of bytes to be bcopy()'d to move an entry. If
d_ino == 0 however, DIRSIZ() is not guaranteed to return a sensible
length, so ufs_direnter could end up corrupting a directory during
compaction. In practice I believe this can only happen after fsck_ffs
has fixed a previously-corrupted directory.
We now deal with any mid-block unused entries specially to avoid
using DIRSIZ() or bcopy() on such entries. We also ensure that the
variables 'dsize' and 'spacefree' contain meaningful values at all
times. Add a few comments to describe better this intricate piece
of code.
The special handling of mid-block unused entries makes the dirhash-
specific bugfix in the previous revision (1.53) now uncecessary,
so this change removes it.
Reviewed by: mckusick
that the directory entry was in use before attempting to find it
in the hash structures to change its offset. Normally, unused
entries do not need to be moved, but fsck can leave behind some
unused entries that do. A dirhash sanity panic resulted when the
entry to be moved was not found. Add a check that stops entries
with d_ino == 0 from being passed to ufsdirhash_move().
because it shares ufs code. In ufs_fhtovp(), the test on i_effnlink
is invalid because ext2fs does not maintain this field. In ufs_close(),
i_effnlink is also tested, to determines whether or not to call
vn_start_write(). The ufs_fhtovp issue breaks NFS exporting of
ext2fs filesystems; I believe the other is harmless.
Fix both cases by checking um_i_effnlink_valid in the ufsmount
struct, and use i_nlink if necessary.
Noticed by: bde
Reviewed by: mckusick, bde
entry (d_ino == 0) is found in a position that is not the start of
a DIRBLKSIZ block.
While such entries cannot occur normally (ufs always extends the
previous entry to cover the free space instead), they do not cause
problems and fsck does not fix them, so panicking is bad.
extra getblk/brelse sequence for each lookup. We already had this
buf in ufsdirhash_lookup(), so there was no point in brelse'ing it
only to have the caller immediately reaquire the same buffer.
This should make the case of sequential lookups marginally faster;
in my tests, sequential lookups with dirhash enabled are now only
around 1% slower than without dirhash.
directories. When enabled via "options UFS_DIRHASH", in-core hash
arrays are maintained for large directories. These allow all
directory operations to take place quickly instead of requiring
long linear searches. For now anyway, dirhash is not enabled by
default.
The in-core hash arrays have a memory requirement that is approximately
half the size of the size of the on-disk directory file. A number
of new sysctl variables allow control over which directories get
hashed and over the maximum amount of memory that dirhash will use:
vfs.ufs.dirhash_minsize
The minimum on-disk directory size for which hashing should be
used. The default is 2560 (2.5k).
vfs.ufs.dirhash_maxmem
The system-wide maximum total memory to be used by dirhash data
structures. The default is 2097152 (2MB).
The current amount of memory being used by dirhash is visible
through the read-only sysctl variable vfs.ufs.dirhash_maxmem.
Finally, some extra sanity checks that are enabled by default, but
which may have an impact on performance, can be disabled by setting
vfs.ufs.dirhash_docheck to 0.
Discussed on: -fs, -hackers
(this commit is just the first stage). Also add various GIANT_ macros to
formalize the removal of Giant, making it easy to test in a more piecemeal
fashion. These macros will allow us to test fine-grained locks to a degree
before removing Giant, and also after, and to remove Giant in a piecemeal
fashion via sysctl's on those subsystems which the authors believe can
operate without Giant.
The symptom being treated in 1.98 was to avoid freeing a
pagedep dependency if there was still a newdirblk dependency
referencing it. That change is correct and no longer prints
a warning message when it occurs. The other part of revision
1.98 was to panic when a newdirblk dependency was encountered
during a file truncation. This fix removes that panic and
replaces it with code to find and delete the newdirblk
dependency so that the truncation can succeed.
true. This permits better interoperability with programs which register
filters on their stdin/stdout handles.
Submitted by: Niels Provos <provos@citi.umich.edu>
incorrect due to a missing check for some dependency. This change
avoids the freelist corruption (but not the temporarily inconsistent
state of the file system).
A message is printed as a reminder of the under lying problem when a
pagedep structure is not freed due to the NEWBLOCK flag being set.
Submitted by: Tor.Egge@fast.no
