Commit Graph

60489 Commits

Author SHA1 Message Date
Ruslan Ermilov
225fcb2690 Back out revision 1.8. The only thing it did was to break LEDs (and
some other less noticeable things) on little-endian 64-bit platforms
such as amd64.

PR:		kern/101931
Discussed with:	emax, marius
MFC after:	1 day
2006-09-19 09:34:25 +00:00
Andre Oppermann
9fd7a4e705 Don't forget to add curly braces when doing more than one line of actions
after a 'if' statement.

Pointy hat to:	andre
2006-09-18 23:44:12 +00:00
Maksim Yevmenkin
8c3c9a505f Do not try to call keyboard callback unless keyboard is active and busy.
This should fix 'kbdcontrol -K < /dev/console' panic on sparc64 with sunkbd(4).

PR:		sparc64/96798
MFC after:	1 week
2006-09-18 22:56:59 +00:00
Jung-uk Kim
3e9b1bcabf Do not strip VLAN tag in promiscuous mode. 2006-09-18 22:18:21 +00:00
Jung-uk Kim
f9004b6d2d Simplify promiscuous mode check and make ALLMULTI independent from it. 2006-09-18 20:54:40 +00:00
John Baldwin
d4a5bcc95c Update prototype for smbus callback change.
Reported by:	Ian FREISLICH <if at hetzner dot co dot za>
2006-09-18 20:17:42 +00:00
Christian S.J. Peron
600d74bfa1 Make sure that lutimes(2) gets processed and converted into a BSM record.
Submitted by:	rwatson
MFC after:	1 day
2006-09-18 17:55:32 +00:00
Sam Leffler
72845968fa remove local change
Spotted by:	Gavin Atkinson
2006-09-18 17:23:35 +00:00
Sam Leffler
d9994d8bb4 remove this from HEAD too since it got taken off the vendor branch 2006-09-18 17:01:35 +00:00
Sam Leffler
e73ceabdc0 fixup build after move of ah_osdep.?
MFC after:	2 weeks
2006-09-18 16:50:59 +00:00
Sam Leffler
6432da677c This commit was generated by cvs2svn to compensate for changes in r162413,
which included commits to RCS files with non-trunk default branches.
2006-09-18 16:49:15 +00:00
Sam Leffler
3fe92528af o move ath hal os glue code from the hal to the driver: this code was
part of the hal distribution early on when the hal was built for
  each os but it's been portable for a long time so move the os-specific
  code out (and off the vendor branch)
o correct the copyright on ah_osdep.?; it was mistakenly given a
  restricted license and not a dual-bsd/gpl license
o remove the module api definition as it was never used
o fixup include paths for move of ah_osdep.h

MFC after:	2 weeks
2006-09-18 16:49:15 +00:00
Sam Leffler
3da8df6081 nuke unused support for building ath hal from src code
MFC after:	1 week
2006-09-18 16:30:28 +00:00
Sam Leffler
5901d2d38a Add support for newer parts that do not require separate keycache
entries for tx+rx mic keys.  This requires a newer hal, but works
fine with the current hal in cvs.

MFC after:	2 weeks
2006-09-18 16:26:19 +00:00
Sam Leffler
a7ee023101 remove stub radar support; it's never been used and future
hal's will not include the calls (due to redesign)

MFC after:	1 week
2006-09-18 16:16:02 +00:00
Konstantin Belousov
4dec8579bd Fix the race while waiting for coveredvp lock during unmount. The vnode may
be recycled during the sleep, wrap the vn_lock with vhold/vdrop.
Check that coveredvp still points to the same mp after sleep (needed
because sleep dropped Giant).
Move check for user rights for unmount after coveredvp lock is obtained.

Tested by:	Peter Holm
Reviewed by:	tegge
Approved by:	kan (mentor)
MFC after:	2 weeks
2006-09-18 15:35:22 +00:00
Konstantin Belousov
e7f9b74438 Resolve the devfs deadlock caused by LOR between devfs_mount->dm_lock and
vnode lock in devfs_allocv. Do this by temporary dropping dm_lock around
vnode locking.

For safe operation, add hold counters for both devfs_mount and devfs_dirent,
and DE_DOOMED flag for devfs_dirent. The facilities allow to continue after
dropping of the dm_lock, by making sure that referenced memory does not
disappear.

Reviewed by:	tegge
Tested by:	kris
Approved by:	kan (mentor)
PR:		kern/102335
2006-09-18 13:23:08 +00:00
Robert Watson
5702e0965e Declare security and security.bsd sysctl hierarchies in sysctl.h along
with other commonly used sysctl name spaces, rather than declaring them
all over the place.

MFC after:	1 month
Sponsored by:	nCircle Network Security, Inc.
2006-09-17 20:00:36 +00:00
Christian S.J. Peron
f07b836981 Correct a slight regression which was introduced with the implementation of
audit pipes. If the kernel record was not selected for the trail or the pipe,
any user supplied record attached to it would be tossed away, resulting in
otherwise selected events being lost.

- Introduce two new masks: AR_PRESELECT_USER_TRAIL AR_PRESELECT_USER_PIPE,
  currently we have AR_PRESELECT_TRAIL and AR_PRESELECT_PIPE, which tells
  the audit worker that we are interested in the kernel record, with
  the additional masks we can determine if either the pipe or trail is
  interested in seeing the kernel or user record.

- In audit(2), we unconditionally set the AR_PRESELECT_USER_TRAIL and
  AR_PRESELECT_USER_PIPE masks under the assumption that userspace has
  done the preselection [1].

Currently, there is work being done that allows the kernel to parse and
preselect user supplied records, so in the future preselection could occur
in either layer. But there is still a few details to work out here.

[1] At some point we need to teach au_preselect(3) about the interests of
    all the individual audit pipes.

This is a RELENG_6 candidate.

Reviewed by:	rwatson
Obtained from:	TrustedBSD Project
MFC after:	1 week
2006-09-17 17:52:57 +00:00
David Xu
103c065406 Make cpu_set_upcall_kse() and cpu_set_user_tls() work for 32bit process. 2006-09-17 14:54:14 +00:00
Andre Oppermann
a855e2b4c0 Remove VLAN mtag UMA zones and initialize ether_vtag and tso_segsz packet
header fields to zero on mbuf allocation.

Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-17 13:44:32 +00:00
Andre Oppermann
7ff0b850a6 Make tcp_usr_send() free the passed mbufs on error in all cases as the
comment to it claims.

Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-17 13:39:35 +00:00
Andre Oppermann
78ba57b9e1 Move ethernet VLAN tags from mtags to its own mbuf packet header field
m_pkthdr.ether_vlan.  The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.

Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:

	m->m_pkthdr.ether_vtag = vlan_id;	/* ntohs()? */
	m->m_flags |= M_VLANTAG;

to mark the packet m with the specified VLAN tag.

On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:

	if (m->m_flags & M_VLANTAG) {
		... = m->m_pkthdr.ether_vtag;	/* htons()? */
		... pass tag to hardware ...
	}

VLAN tags are stored in host byte order.  Byte swapping may be necessary.

(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)

Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition.  No more tag
memory allocation have to be done.

Reviewed by:	thompsa, yar
Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00
Robert Watson
da7cbdc2b3 Regenerate. 2006-09-17 13:29:36 +00:00
Robert Watson
6c2d307a0e AUE_SIGALTSTACK instead of AUE_SIGPENDING for sigaltstack().
Obtained from:	TrustedBSD Project
MFC after:	3 days
2006-09-17 13:28:11 +00:00
Robert Watson
31214759fa Add AUE_SYSARCH to the list of audit events during BSM conversion to prevent
a console warning.  Eventually, we will capture more arguments for sysarch.

Obtained from:	TrustedBSD Project
MFC after:	3 days
2006-09-17 11:42:40 +00:00
Robert Watson
101581b082 Expore kern.acct_configured, a sysctl that reflects the configured/
unconfigured state of the kernel accounting system.  This is used by
the accounting privilege regression test to determine whether
accounting is in use and will be disrupted by the regression test.

Sponsored by:	nCircle Network Security, Inc.
Obtained from:	TrustedBSD Project
MFC after:	1 month
2006-09-17 11:00:36 +00:00
Andrew Thompson
781dd9ae05 Rearrange things so that ARP packets can be filtered or rate limited with IPFW.
Requested by:	Jon Otterholm
Tested by:	Jon Otterholm
2006-09-17 08:20:56 +00:00
Matt Jacob
059cce1a75 Don't allow attachment of disks that could cause GEOM to panic. 2006-09-16 21:21:07 +00:00
Matt Jacob
1190a85bef New Dell 1950/2950 SES backplane drops off the bus if you poke
at greater then lun 0.

MFC after:	1 week
2006-09-16 17:35:47 +00:00
Robert Watson
ef0d1723db Add audit hooks for ppc, ia64 system call paths.
Reviewed by:	marcel (ia64)
Obtained from:	TrustedBSD Project
MFC after:	3 days
2006-09-16 17:03:02 +00:00
Alexander Leidinger
18f81b3dfa - don't reboot() when feed with wrong parameters (and enough permissions) [1]
- add support to power off the system [2]
- check the linux magic values [3]

Submitted by:	Marcin Cieslak <saper@SYSTEM.PL> [1,2]
Modelled after:	linux man page of the reboot() syscall [3]
Found by:	LTP testcase "reboot02" [1]
Tested with:	LTP testcase "reboot02" [1,3]
MFC after:	1 week
2006-09-16 14:12:04 +00:00
Pawel Jakub Dawidek
f8aa16c66c Fix detecting of UFS1 label when mediasize%fragsize != 0.
Submitted by:	Stanislav Sedov
PR:		kern/84637
MFC after:	1 week
2006-09-16 11:24:41 +00:00
Pawel Jakub Dawidek
8abd1ad101 Add 'configure' subcommand which for now only allows setting and removing
of the BOOT flag. It can be performed on both attached and detached
providers.

Requested by:	Matthias Lederhofer <matled@gmx.net>
MFC after:	1 week
2006-09-16 10:43:17 +00:00
Pawel Jakub Dawidek
5e165262f1 Add __printflike() to gctl_error().
Approved by:	phk
MFC after:	1 week
2006-09-16 10:39:07 +00:00
John Hay
724e825a16 Handle a list of IPv6 src and dst addresses correctly, eg.
ipfw add allow ip6 from any to 2000::/16,2002::/16

PR:		102422 (part 3)
Submitted by:	Andrey V. Elsukov <bu7cher at yandex dot ru>
MFC after:	5 days
2006-09-16 10:27:05 +00:00
Pawel Jakub Dawidek
5a20446db8 Small fixes after adding __printflike() to gctl_error().
Approved by:	phk
MFC after:	3 days
2006-09-16 09:48:29 +00:00
Pawel Jakub Dawidek
dec53cdd32 Remove extra arguments.
MFC after:	3 days
2006-09-16 07:47:57 +00:00
John Hay
f129892448 Make it possible to add an IPv6 host route to a host directly connected.
Use something like this:
route add -inet6 <dest_addr> <my_addr_on_that_interface> -interface -llinfo

This is usefull for wireless adhoc mesh networks.

MFC after:	5 days
2006-09-16 06:24:28 +00:00
Ruslan Ermilov
85fcf1ba07 Fix input byte counting. Now the sum of the ipackets/ibytes counters
of individual interfaces should match the ipackets/ibytes counter of
the aggregate (FEC) interface.

PR:		kern/82189
Submitted by:	Stikheev Andrew <sand AT zunet DOT ru>
MFC after:	3 days
2006-09-15 20:17:45 +00:00
Andrew Gallatin
0fa7f68197 - Updated to the latest myri10ge firmware
- Added support for multicast filtering, now that the firmware
  supports it.  Note that this is not yet tested, as multicast
  seems to panic -current (even w/o mxge loaded)
- Added workaround to cope with different irq data struct size on
  pre-multicast firmware which can found running on nics.
- Added Intel E5000 PCIe chipsets to list providing aligned completions.
- Replaced various magic constants with #defines, now that they are
  defined in the firmware headers.
2006-09-15 19:24:45 +00:00
Pawel Jakub Dawidek
679f8b7e7a Add 'show geom [addr]' ddb(4) command, which prints entire GEOM topology if
no additional argument is given or details about the given GEOM object
(class, geom, provider or consumer).

Approved by:	phk
2006-09-15 16:36:45 +00:00
Andre Oppermann
31ecb34a4e When doing TSO subtract hdrlen from TCP_MAXWIN to prevent ip->ip_len
from wrapping when we generate a maximally sized packet for later
segmentation.

Noticed by:	gallatin
Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-15 16:08:09 +00:00
Ruslan Ermilov
7f01dc25c4 Make it possible to set a larger MTU by attempting to set MTUs on all
trunk ports first.  If that succeeds, and we're inside our own bounds,
so be it.

Still not ideal -- adding a port after changing an MTU doesn't change
port's MTU, but a step in the right direction.

PR:		kern/95417
Submitted by:	Vladimir Ivanov <wawa AT yandex-team DOT ru>
MFC after:	3 days

I've slightly edited a patch to make the conditional logic positive
and remove (what I think was) a redundant ng_fec_init() call.
2006-09-15 16:06:27 +00:00
Ruslan Ermilov
3d82b87057 SIOCSIFFLAGS doesn't require an argument in kernel land; instead, flags
are supposed to be set directly in ifnet already.  This change fixes a
panic when ng_eiface node is attached to ng_fec node and the latter is
shut down (ng_fec sets flags and then calls SIOCSIFFLAGS with a NULL
argument).

MFC after:	3 days
2006-09-15 15:53:09 +00:00
Andrew Gallatin
aed8e389c1 - Added TSO support. This entailed increasing the number of send descriptors
in the transmit busdma tag, so I moved the segment list off the
stack.

- Fixed transmit routine to ensure it doesn't read past the end
of an mbuf when parsing headers.

- Corrected handling of odd length segments.  Setting MXGEFW_FLAGS_ALIGN_ODD
is required only when offloading the checksum of that frame.

Sponsored by: Myricom Inc.
2006-09-15 15:41:28 +00:00
Gleb Smirnoff
6b9f5c941c - Consistently use if_printf() only in interface methods: if_start(),
if_watchdog, etc., or in functions used only in these methods.
  In all other functions in the driver use device_printf().
- Use __func__ instead of typing function name.

Submitted by:	Alex Lyashkov <umka sevcity.net>
2006-09-15 15:16:12 +00:00
Ruslan Ermilov
aaf10c46c7 Whitespace nits. 2006-09-15 11:01:23 +00:00
Pawel Jakub Dawidek
ef7c47775f Less magic.
MFC after:	3 days
2006-09-15 10:44:55 +00:00
Gleb Smirnoff
cc4c1b6971 Consistently use if_printf() only in interface methods: if_start,
if_ioctl, if_watchdog, etc, or in functions that are used by
these methods only. In all other cases use device_printf().

This also fixes several panics, when if_printf() is called before
softc->ifp was initialized.

Submitted by:	Alex Lyashkov <umka sevcity.net>
2006-09-15 10:40:54 +00:00